lcdBacklightOn = false; // 初始化LCD背光状态为关闭
keyTestStarted = false;
keyTestDialog = nullptr;
- keyRotateDetected = false;
audioTestRoundIndex = 0;
audioTestAnyPass = false;
audioTestAwaitingMicLevel = false;
gSensorErrorDetected = false;
gSensorAnySample = false;
gSensorAllSamplesInRange = true;
+ gSensorValidSampleCount = 0;
gSensorStartX = 0.0;
gSensorStartY = 0.0;
gSensorStartZ = 0.0;
}
// 检测按键测试结果（用于产测）
- if (line.contains("fac:id") || line.contains("testPresenter::OnRotate")) {
+ if (line.contains("fac:id")) {
checkKeyTestResult(line);
}
// 开始产测流程
isProductionTestRunning = true;
- // 根据checkbox决定从哪个测试开始
if (isTestItemEnabled("lcd")) {
currentTestStep = TEST_LCD;
currentLcdColor = 1; // 从红色开始
ui->statusbar->showMessage("开始产测流程...", 2000);
qDebug() << "开始产测流程";
- // ui->ProductionTestButton->setText("停止产测");
-
- // 开始LCD测试
performLcdTest();
} else {
- // LCD未启用，跳过到下一个启用的测试
- currentTestStep = TEST_LCD; // 先设置为LCD，然后skipToNextEnabledTest会跳过
- currentLcdColor = 1; // 初始化LCD颜色
+ currentTestStep = TEST_LCD;
+ currentLcdColor = 1;
ui->statusbar->showMessage("开始产测流程...", 2000);
qDebug() << "开始产测流程，LCD测试未启用，跳过";
- // 跳过LCD测试，进入下一个启用的测试
skipToNextEnabledTest();
}
}
}
}
-// 执行功耗测试（AT^TESTJUMP=DEEPSLEEP，进入后由人工确认）
+// 执行功耗测试（功耗前先 AT^PMRMVOTE 取消投票，再 AT^TESTJUMP=DEEPSLEEP，进入后由人工确认）
void MainWindow::performDeepsleepTest()
{
if (!isProductionTestRunning || currentTestStep != TEST_DEEPSLEEP) {
ui->statusbar->showMessage("功耗测试：将进入深度睡眠测试界面，请等待确认弹窗", 3000);
if (serial && serial->isOpen()) {
- ui->recvTextEdit->append(">>> 发送指令: AT^ENTERTESTVIEW (进入产测界面)");
- serial->write("AT^ENTERTESTVIEW\r\n");
- qDebug() << "发送指令: AT^ENTERTESTVIEW (功耗测试前)";
+ ui->recvTextEdit->append(">>> 发送指令: AT^PMRMVOTE (取消投票，功耗测试前)");
+ serial->write("AT^PMRMVOTE\r\n");
+ qDebug() << "发送指令: AT^PMRMVOTE (功耗测试前)";
}
QTimer::singleShot(300, this, [this]() {
if (!serial || !serial->isOpen()) {
return;
}
- ui->recvTextEdit->append(">>> 发送指令: AT^TESTJUMP=DEEPSLEEP");
- serial->write("AT^TESTJUMP=DEEPSLEEP\r\n");
- qDebug() << "发送指令: AT^TESTJUMP=DEEPSLEEP";
+ ui->recvTextEdit->append(">>> 发送指令: AT^ENTERTESTVIEW (进入产测界面)");
+ serial->write("AT^ENTERTESTVIEW\r\n");
+ qDebug() << "发送指令: AT^ENTERTESTVIEW (功耗测试前)";
- // 仅进入界面不会真正进深睡，需再发 FACTORYDEEPSLEEPENTER
- QTimer::singleShot(400, this, [this]() {
+ QTimer::singleShot(300, this, [this]() {
if (!isProductionTestRunning || currentTestStep != TEST_DEEPSLEEP) {
return;
}
if (!serial || !serial->isOpen()) {
return;
}
- ui->recvTextEdit->append(">>> 发送指令: AT^FACTORYDEEPSLEEPENTER");
- serial->write("AT^FACTORYDEEPSLEEPENTER\r\n");
- qDebug() << "发送指令: AT^FACTORYDEEPSLEEPENTER";
- appendToLogFile(">>> 发送指令: AT^FACTORYDEEPSLEEPENTER\n");
+ ui->recvTextEdit->append(">>> 发送指令: AT^TESTJUMP=DEEPSLEEP");
+ serial->write("AT^TESTJUMP=DEEPSLEEP\r\n");
+ qDebug() << "发送指令: AT^TESTJUMP=DEEPSLEEP";
- QTimer::singleShot(500, this, [this]() {
- if (isProductionTestRunning && currentTestStep == TEST_DEEPSLEEP) {
- showDeepsleepTestConfirmDialog();
+ // 仅进入界面不会真正进深睡，需再发 FACTORYDEEPSLEEPENTER
+ QTimer::singleShot(400, this, [this]() {
+ if (!isProductionTestRunning || currentTestStep != TEST_DEEPSLEEP) {
+ return;
}
+ if (!serial || !serial->isOpen()) {
+ return;
+ }
+ ui->recvTextEdit->append(">>> 发送指令: AT^FACTORYDEEPSLEEPENTER");
+ serial->write("AT^FACTORYDEEPSLEEPENTER\r\n");
+ qDebug() << "发送指令: AT^FACTORYDEEPSLEEPENTER";
+ appendToLogFile(">>> 发送指令: AT^FACTORYDEEPSLEEPENTER\n");
+
+ QTimer::singleShot(500, this, [this]() {
+ if (isProductionTestRunning && currentTestStep == TEST_DEEPSLEEP) {
+ showDeepsleepTestConfirmDialog();
+ }
+ });
});
});
});
qDebug() << "开始按键测试";
ui->recvTextEdit->append("========== 开始按键测试（TESTJUMP=KEY） ==========");
updateTestStatus("key", STATUS_TESTING);
- ui->statusbar->showMessage("按键测试中，请按键0并执行旋转动作", 10000);
+ ui->statusbar->showMessage("按键测试中，请按下按键 0", 10000);
- // 重置按键测试状态（仅按键0 + 旋转）
+ // 重置按键测试状态（仅按键 0）
keyTestStarted = true;
for (int i = 0; i < 4; i++) {
keyTestStatus[i] = 0;
}
- keyRotateDetected = false;
// 先跳转产测主界面，再跳KEY测试界面
if (serial && serial->isOpen()) {
// 创建按键测试弹窗
keyTestDialog = new QDialog(this);
keyTestDialog->setWindowTitle("按键测试");
- keyTestDialog->setFixedSize(460, 250);
+ keyTestDialog->setFixedSize(400, 220);
keyTestDialog->setModal(true);
// 设置布局
QVBoxLayout *layout = new QVBoxLayout(keyTestDialog);
- QLabel *instructionLabel = new QLabel("请æ£\80æµ\8bæ\8c\89é\94®0ä¸\8eæ\97\8b转äº\8b件ï¼\9bæ£\80æµ\8bå\88°å\90\8e按钮会变绿");
+ QLabel *instructionLabel = new QLabel("请æ\8c\89ä¸\8bæ\8c\89é\94® 0ï¼\9bæ£\80æµ\8bå\88°å\90\8eä¸\8bæ\96¹按钮会变绿");
layout->addWidget(instructionLabel);
- // 仅保留按键0和旋转两个检测项
QHBoxLayout *indicators = new QHBoxLayout();
keyButtons[0] = new QPushButton("按键 0");
keyButtons[0]->setFixedSize(120, 44);
keyButtons[0]->setStyleSheet("QPushButton { background-color: #f0f0f0; border: 2px solid #888888; border-radius: 5px; font-weight: bold; }");
- keyButtons[1] = new QPushButton("旋转");
- keyButtons[1]->setFixedSize(120, 44);
- keyButtons[1]->setStyleSheet("QPushButton { background-color: #f0f0f0; border: 2px solid #888888; border-radius: 5px; font-weight: bold; }");
+ keyButtons[1] = nullptr;
keyButtons[2] = nullptr;
keyButtons[3] = nullptr;
indicators->addWidget(keyButtons[0]);
- indicators->addWidget(keyButtons[1]);
+ indicators->addStretch();
layout->addLayout(indicators);
// 添加测试结果按钮
keyButtons[0]->setText("按键 0 ✓");
}
ui->statusbar->showMessage("检测到按键 0", 1000);
+ // 仅按键 0：检测到后自动结束本项
+ QTimer::singleShot(500, [this]() {
+ if (keyTestDialog && isProductionTestRunning && currentTestStep == TEST_KEY) {
+ keyTestDialog->accept();
+ updateTestStatus("key", STATUS_SUCCESS);
+ keyTestStarted = false;
+ skipToNextEnabledTest();
+ }
+ });
}
}
-
- // 旋转事件：testPresenter::OnRotate
- if (data.contains("testPresenter::OnRotate")) {
- keyRotateDetected = true;
- if (keyButtons[1]) {
- keyButtons[1]->setStyleSheet(
- "QPushButton { "
- "background-color: #4CAF50; "
- "color: white; "
- "border: 2px solid #45a049; "
- "border-radius: 5px; "
- "font-weight: bold; "
- "}"
- );
- keyButtons[1]->setText("旋转 ✓");
- }
- ui->statusbar->showMessage("检测到旋转事件 OnRotate", 1000);
- }
-
- // 条件满足自动通过：按键0 + 旋转
- if (keyTestStatus[0] == 1 && keyRotateDetected) {
- QTimer::singleShot(500, [this]() {
- if (keyTestDialog && isProductionTestRunning && currentTestStep == TEST_KEY) {
- keyTestDialog->accept();
- updateTestStatus("key", STATUS_SUCCESS);
- keyTestStarted = false;
- skipToNextEnabledTest();
- }
- });
- }
}
// 显示按键测试确认对话框
qDebug() << "发送AT^ENTERTESTVIEW (进入产测界面)";
}
- // 初始化完成后，切换到LCD测试阶段（如果启用）
+ // 初始化完成后，切换到 LCD（若启用）；功耗测试在 GPS 之后
QTimer::singleShot(1000, this, [this]() {
- if (isProductionTestRunning) {
- if (isTestItemEnabled("lcd")) {
- qDebug() << "AT^PMADDVOTE指令发送完成，开始LCD测试";
- ui->statusbar->showMessage("初始化完成，开始LCD测试", 2000);
- currentTestStep = TEST_LCD;
- QTimer::singleShot(1000, this, [this]() {
- if (isProductionTestRunning && currentTestStep == TEST_LCD) {
- qDebug() << "开始LCD测试流程";
- performLcdTest();
- }
- });
- } else {
- qDebug() << "AT^PMADDVOTE指令发送完成，LCD测试未启用，跳过";
- ui->statusbar->showMessage("初始化完成，LCD测试未启用，跳过", 2000);
- currentTestStep = TEST_LCD;
- skipToNextEnabledTest();
- }
+ if (!isProductionTestRunning) {
+ return;
+ }
+ if (isTestItemEnabled("lcd")) {
+ qDebug() << "AT^PMADDVOTE指令发送完成，开始LCD测试";
+ ui->statusbar->showMessage("初始化完成，开始LCD测试", 2000);
+ currentTestStep = TEST_LCD;
+ QTimer::singleShot(1000, this, [this]() {
+ if (isProductionTestRunning && currentTestStep == TEST_LCD) {
+ qDebug() << "开始LCD测试流程";
+ performLcdTest();
+ }
+ });
+ } else {
+ qDebug() << "AT^PMADDVOTE指令发送完成，LCD测试未启用，跳过";
+ ui->statusbar->showMessage("初始化完成，LCD测试未启用，跳过", 2000);
+ currentTestStep = TEST_LCD;
+ skipToNextEnabledTest();
}
});
}
int charge = -1; // -1表示未检测到充电状态
bool voltageFound = false;
bool chargeFound = false;
- // 温度正常范围（可根据实际电池规格调整，此处为常见NTC有效范围）
- const double MIN_NORMAL_TEMP = 0.0; // 最低正常温度：0℃
- const double MAX_NORMAL_TEMP = 60.0; // 最高正常温度：60℃
// 尝试多种fac:voltage格式
if (facVoltagePattern1.indexIn(data) != -1) {
qDebug() << "使用备用charge格式3解析成功（charge 格式）";
}
}
+
+ // 仅有 charge 字段、无电压行时：charge==1 也直接通过
+ if (isTestItemEnabled("battery") && chargeFound && charge == 1 && !voltageFound) {
+ if (testTimeoutTimer->isActive()) {
+ testTimeoutTimer->stop();
+ qDebug() << "电池测试收到响应，停止超时检测";
+ }
+ ui->recvTextEdit->append(">>> 电池测试通过：设备正在充电 (charge=1)");
+ qDebug() << "电池测试通过：仅依据充电状态（无电压字段）";
+ updateTestStatus("charge", STATUS_SUCCESS);
+ updateTestStatus("ntc", STATUS_SUCCESS);
+ updateTestStatus("battery", STATUS_SUCCESS);
+ ui->statusbar->showMessage("电池测试通过（正在充电）", 2000);
+ if (isProductionTestRunning && currentTestStep == TEST_BATTERY) {
+ skipToNextEnabledTest();
+ }
+ return;
+ }
// 详细日志输出
if (voltageFound) {
}
if (voltageFound) {
- // 停止超时检测
if (testTimeoutTimer->isActive()) {
testTimeoutTimer->stop();
qDebug() << "电池测试收到响应，停止超时检测";
}
- // 充电状态检查（根据checkbox决定是否判定）
- // 注意：充电状态每次都解析，但只有charge checkbox选中时才用充电状态来判断是否通过
- bool chargeCheckEnabled = isTestItemEnabled("battery");
- bool ntcCheckEnabled = isTestItemEnabled("battery");
-
- // 拼接检测结果日志（包含所有已获取的字段）
- // 注意：充电状态和温度数据每次都解析并记录，无论checkbox是否选中
QString resultLog = QString("检测到电池电压:%1V").arg(voltage);
- if (percent > 0) resultLog += QString(", 电量:%1%").arg(percent);
+ if (percent > 0) {
+ resultLog += QString(", 电量:%1%").arg(percent);
+ }
if (temp != -1.0) {
resultLog += QString(", 温度:%1℃").arg(temp);
- // 如果NTC未启用，在日志中说明温度数据已解析但不用于判定
- if (!ntcCheckEnabled) {
- resultLog += "(NTC未启用，不用于判定)";
- }
}
if (chargeFound && charge != -1) {
- QString chargeStatusText;
- if (charge == 1) {
- chargeStatusText = "充电中";
- } else if (charge == 0) {
- chargeStatusText = "未充电";
- } else {
- chargeStatusText = QString("未知值(%1)").arg(charge);
- }
+ const QString chargeStatusText = (charge == 1) ? "充电中"
+ : (charge == 0) ? "未充电" : QString("未知值(%1)").arg(charge);
resultLog += QString(", 充电状态:%1").arg(chargeStatusText);
- // 如果充电检查未启用，在日志中说明充电状态已解析但不用于判定
- if (!chargeCheckEnabled) {
- resultLog += "(充电检查未启用，不用于判定)";
- }
- } else if (chargeFound && charge == -1) {
- resultLog += ", 充电状态:解析失败";
- qDebug() << "警告: charge字段存在但值为-1，可能解析有问题";
} else {
resultLog += ", 充电状态:未检测到";
}
qDebug() << resultLog;
ui->recvTextEdit->append(QString(">>> 电池测试: %1").arg(resultLog));
-
- bool chargePassed = true; // 默认通过（如果未启用检查）
- bool ntcPassed = true; // 默认通过（如果未启用检查）
-
- // 充电状态每次都解析（已经在上面解析了），这里只判断是否满足条件
- if (chargeCheckEnabled) {
- // charge checkbox选中，需要判断充电状态
- if (chargeFound && charge == 1) {
- // 充电中，通过
- chargePassed = true;
- updateTestStatus("charge", STATUS_SUCCESS);
- qDebug() << "充电检查通过：设备正在充电 (charge=1)";
- ui->recvTextEdit->append(">>> 充电检查通过：设备正在充电");
- } else if (chargeFound && charge == 0) {
- // 未充电，不通过
- chargePassed = false;
- updateTestStatus("charge", STATUS_FAILED);
- qDebug() << "充电检查失败：设备未充电 (charge=0)";
- ui->statusbar->showMessage("充电检查失败 - 设备未充电", 2000);
- ui->recvTextEdit->append(">>> 充电检查失败：设备未充电");
-
- // 显示充电失败对话框（用户点确认会在此函数内调用skipToNextEnabledTest并返回）
- showBatteryChargeFailDialog();
- return; // 充电失败后不再继续后续NTC等逻辑，已由弹窗处理
- } else if (chargeFound && charge != -1 && charge != 0 && charge != 1) {
- // 检测到charge字段但值不是0或1，可能是异常值
- qDebug() << QString("充电检查：检测到异常charge值 %1，期望0或1").arg(charge);
- ui->recvTextEdit->append(QString(">>> 警告: 充电状态值异常: %1 (期望0或1)").arg(charge));
- QMessageBox msgBox(this);
- msgBox.setWindowTitle("充电状态异常");
- msgBox.setText(QString("检测到异常的充电状态值: %1").arg(charge));
- msgBox.setInformativeText("期望值为0（未充电）或1（充电中），\n但检测到的值不符合预期，是否继续测试？");
- msgBox.setStandardButtons(QMessageBox::Yes | QMessageBox::No);
- msgBox.setDefaultButton(QMessageBox::Yes);
- msgBox.setIcon(QMessageBox::Warning);
-
- int ret = msgBox.exec();
- if (ret == QMessageBox::No) {
- updateTestStatus("charge", STATUS_FAILED);
- chargePassed = false;
- } else {
- // 用户选择继续，认为充电检查通过
- chargePassed = true;
- updateTestStatus("charge", STATUS_SUCCESS);
- }
- } else {
- // 未检测到充电状态（chargeFound=false 或 charge=-1），如果启用了充电检查，需要提示
- qDebug() << "充电检查：未检测到充电状态信息";
- ui->recvTextEdit->append(">>> 警告: 未检测到充电状态信息");
- QMessageBox msgBox(this);
- msgBox.setWindowTitle("充电状态检查提醒");
- msgBox.setText("未检测到设备的充电状态信息");
- msgBox.setInformativeText("系统未能检测到设备的充电状态信息，\n但电压检测正常，是否继续测试？");
- msgBox.setStandardButtons(QMessageBox::Yes | QMessageBox::No);
- msgBox.setDefaultButton(QMessageBox::Yes);
- msgBox.setIcon(QMessageBox::Warning);
-
- int ret = msgBox.exec();
- if (ret == QMessageBox::No) {
- updateTestStatus("charge", STATUS_FAILED);
- chargePassed = false;
- } else {
- // 用户选择继续，认为充电检查通过
- chargePassed = true;
- updateTestStatus("charge", STATUS_SUCCESS);
- }
- }
- } else {
- // 充电检查未启用，不判定（但充电状态仍然已解析）
- chargePassed = true;
- QString chargeStatusDesc = "未检测到";
- if (chargeFound) {
- if (charge == 1) {
- chargeStatusDesc = "充电中";
- } else if (charge == 0) {
- chargeStatusDesc = "未充电";
- } else {
- chargeStatusDesc = QString("值%1").arg(charge);
- }
- }
- qDebug() << QString("充电检查未启用，充电状态已解析: %1（但不用于判定）").arg(chargeStatusDesc);
- }
- // NTC温度检查（根据checkbox决定是否判定）
- // 注意：温度数据每次都解析，但只有NTC checkbox选中时才用温度>0来判断是否通过
- // 电压范围：3.3V-4.6V（支持充满电时4.5V+的测量值）
- bool isVoltageNormal = (voltage >= 3.3 && voltage <= 4.6);
- bool isTempNormal = true; // 默认温度正常（未检测到温度时不影响结果）
-
- // 温度数据每次都解析（已经在上面解析了），这里只判断是否满足条件
- if (ntcCheckEnabled) {
- // NTC checkbox选中，需要判断温度是否>0
- if (temp != -1.0) {
- // 判断条件：temp > 0.0
- isTempNormal = (temp > 0.0);
- if (!isTempNormal) {
- ntcPassed = false;
- qDebug() << QString("NTC检查失败：温度 %1℃ 不满足要求（需要 > 0℃）").arg(temp);
- updateTestStatus("ntc", STATUS_FAILED);
- } else {
- ntcPassed = true;
- updateTestStatus("ntc", STATUS_SUCCESS);
- qDebug() << QString("NTC检查通过：温度 %1℃ 满足要求（> 0℃）").arg(temp);
- }
- } else {
- // 未检测到温度，如果启用了NTC检查，需要提示
- qDebug() << "NTC检查：未检测到温度信息";
- QMessageBox msgBox(this);
- msgBox.setWindowTitle("NTC温度检查提醒");
- msgBox.setText("未检测到设备的温度信息");
- msgBox.setInformativeText("系统未能检测到设备的温度信息，\n但电压检测正常，是否继续测试？");
- msgBox.setStandardButtons(QMessageBox::Yes | QMessageBox::No);
- msgBox.setDefaultButton(QMessageBox::Yes);
- msgBox.setIcon(QMessageBox::Warning);
-
- int ret = msgBox.exec();
- if (ret == QMessageBox::No) {
- updateTestStatus("ntc", STATUS_FAILED);
- return;
- }
- // 用户选择继续，认为NTC检查通过
- ntcPassed = true;
- updateTestStatus("ntc", STATUS_SUCCESS);
- }
- } else {
- // NTC检查未启用，不判定（但温度数据仍然已解析）
- ntcPassed = true;
- qDebug() << QString("NTC检查未启用，温度数据已解析: %1℃（但不用于判定）").arg(temp != -1.0 ? QString::number(temp) : "未检测到");
+ if (chargeFound && charge == 0) {
+ updateTestStatus("charge", STATUS_FAILED);
+ qDebug() << "充电检查失败：设备未充电 (charge=0)";
+ ui->statusbar->showMessage("充电检查失败 - 设备未充电", 2000);
+ ui->recvTextEdit->append(">>> 充电检查失败：设备未充电");
+ showBatteryChargeFailDialog();
+ return;
}
- // 更新充电状态（用于判定，不显示在UI）
- // charge和ntc的状态用于最终判定，但不单独显示
- // 如果充电检查失败，已经在上面return了，这里只记录状态用于判定
-
- // 最终判断：只有启用的检查项都通过，才认为电池测试通过
- bool allChecksPassed = chargePassed && ntcPassed && isVoltageNormal;
-
- if (allChecksPassed) {
- QString successMsg = QString("电池测试通过 - 电压: %1V").arg(voltage);
- if (charge == 1 && chargeCheckEnabled) {
- successMsg += ", 充电中";
- }
- if (temp != -1.0 && ntcCheckEnabled) {
- successMsg += QString(", 温度: %1℃").arg(temp);
- }
- if (percent > 0) successMsg += QString(", 电量: %1%").arg(percent);
-
- qDebug() << successMsg;
- ui->statusbar->showMessage(successMsg, 2000);
- updateTestStatus("battery", STATUS_SUCCESS);
- } else {
- QString failMsg = "电池测试失败 - ";
- QStringList failReasons;
- if (!chargePassed && chargeCheckEnabled) {
- failReasons << "充电检查失败";
- }
- if (!ntcPassed && ntcCheckEnabled) {
- failReasons << "NTC温度检查失败";
- }
- if (!isVoltageNormal) {
- failReasons << QString("电压异常: %1V（正常范围3.3V-4.6V）").arg(voltage);
- }
- failMsg += failReasons.join("，");
+ if (chargeFound && charge != 0 && charge != 1) {
+ updateTestStatus("charge", STATUS_FAILED);
+ updateTestStatus("battery", STATUS_FAILED);
+ const QString msg = QString("电池测试失败：充电状态值异常 (%1)，期望0或1").arg(charge);
+ qDebug() << msg;
+ ui->recvTextEdit->append(">>> " + msg);
+ ui->statusbar->showMessage(msg, 3000);
+ return;
+ }
- qDebug() << failMsg;
- ui->statusbar->showMessage(failMsg, 2000);
+ if (!chargeFound) {
+ updateTestStatus("charge", STATUS_UNTESTED);
updateTestStatus("battery", STATUS_FAILED);
+ const QString msg = "电池测试失败：未检测到充电状态信息";
+ qDebug() << msg;
+ ui->recvTextEdit->append(">>> " + msg);
+ ui->statusbar->showMessage(msg, 3000);
+ return;
}
- // 电池测试完成，进入下一个测试（仅所有检查通过时继续）
- if (isProductionTestRunning && currentTestStep == TEST_BATTERY && allChecksPassed) {
- qDebug() << "电池测试完成（所有检查通过），推进到下一个测试";
+ // charge==1：仅据此判定通过（不校验电压、电量、温度）
+ updateTestStatus("charge", STATUS_SUCCESS);
+ updateTestStatus("ntc", STATUS_SUCCESS);
+ updateTestStatus("battery", STATUS_SUCCESS);
+ ui->recvTextEdit->append(">>> 电池测试通过：设备正在充电 (charge=1)");
+ ui->statusbar->showMessage("电池测试通过（正在充电）", 2000);
+ if (isProductionTestRunning && currentTestStep == TEST_BATTERY) {
skipToNextEnabledTest();
}
}
}
-// 执行G-sensor测试（10秒内计算XYZ变化）
+// 执行G-sensor测试（采满5帧有效XYZ即结束，否则最长5秒超时）
void MainWindow::performGsensorTest()
{
// 检查G-sensor测试是否启用
return;
}
- qDebug() << "开始G-sensor测试（10秒XYZ变化计算）";
+ qDebug() << "开始G-sensor测试（采满5次或最长5秒）";
ui->recvTextEdit->append("========== 开始G-sensor测试 ==========");
updateTestStatus("gsensor", STATUS_TESTING);
- ui->statusbar->showMessage("G-sensor测试中：AT^GSENSORTEST=1（10秒）", 3000);
+ ui->statusbar->showMessage("G-sensor测试中：AT^GSENSORTEST=1（采满5帧或5秒超时）", 3000);
// 重置采集状态
gSensorCollecting = false;
gSensorErrorDetected = false;
gSensorAnySample = false;
gSensorAllSamplesInRange = true;
+ gSensorValidSampleCount = 0;
gSensorStartX = 0.0;
gSensorStartY = 0.0;
gSensorStartZ = 0.0;
const double yx = parseG(ui->gsensorDeltaYMaxLineEdit->text(), oyx);
const double zm = parseG(ui->gsensorDeltaZMinLineEdit->text(), ozm);
const double zx = parseG(ui->gsensorDeltaZMaxLineEdit->text(), ozx);
- if (oxm && oxx && xm >= xx) {
- ui->recvTextEdit->append(QString(">>> G-sensor参数警告: X 的 min(%1) ≥ max(%2)，不存在满足 min<X<max 的值")
+ if (oxm && oxx && xm > xx) {
+ ui->recvTextEdit->append(QString(">>> G-sensor参数警告: X 的 min(%1) > max(%2)，闭区间内无解")
.arg(xm, 0, 'g', 8).arg(xx, 0, 'g', 8));
}
- if (oym && oyx && ym >= yx) {
- ui->recvTextEdit->append(QString(">>> G-sensor参数警告: Y 的 min(%1) ≥ max(%2)，不存在满足 min<Y<max 的值")
+ if (oym && oyx && ym > yx) {
+ ui->recvTextEdit->append(QString(">>> G-sensor参数警告: Y 的 min(%1) > max(%2)，闭区间内无解")
.arg(ym, 0, 'g', 8).arg(yx, 0, 'g', 8));
}
- if (ozm && ozx && zm >= zx) {
- ui->recvTextEdit->append(QString(">>> G-sensor参数警告: Z 的 min(%1) ≥ max(%2)，不存在满足 min<Z<max 的值")
+ if (ozm && ozx && zm > zx) {
+ ui->recvTextEdit->append(QString(">>> G-sensor参数警告: Z 的 min(%1) > max(%2)，闭区间内无解")
.arg(zm, 0, 'g', 8).arg(zx, 0, 'g', 8));
}
}
qDebug() << "发送指令: AT^GSENSORTEST=1";
gSensorCollecting = true;
- ui->statusbar->showMessage("G-sensor检测与打印中...（10秒）", 2000);
+ ui->statusbar->showMessage("G-sensor检测与打印中...（5帧或5秒）", 2000);
- // 10秒后停止检测并计算
- gSensorIntervalTimer->start(10000);
+ // 最长5秒；通常采满5帧后提前结束
+ gSensorIntervalTimer->start(5000);
});
}
ui->statusbar->showMessage(QString("G-sensor起始XYZ已记录：X=%1 Y=%2 Z=%3").arg(x).arg(y).arg(z), 1500);
}
- // 末尾XYZ：10秒窗口内最后一次解析到的点
+ // 末尾XYZ：采集窗口内最后一次解析到的点
gSensorHasLast = true;
gSensorLastX = x;
gSensorLastY = y;
gSensorLastZ = z;
- // ç\9e¬æ\97¶ XYZï¼\88å¦\82 XYZ:X=0.00,Y=0.19,Z=-9.92ï¼\89ï¼\9aå¼\80å\8cºé\97´ min < å\80¼ < maxï¼\9bmin å\8f¯ä¸ºè´\9fã\80\81max å\8f¯ä¸ºæ£ï¼\8cä¸\8eå\85¶å®\83ç»\84å\90\88å\90\8c为 double æ¯\94è¾\83
+ // ç\9e¬æ\97¶ XYZï¼\9aé\97å\8cºé\97´ min â\89¤ å\80¼ â\89¤ maxï¼\88è¾¹ç\95\8cä¹\9fç®\97é\80\9aè¿\87ï¼\89
auto parseDoubleOrInvalid = [](const QString& s, bool& ok) -> double {
QString t = s.trimmed();
if (t.isEmpty()) {
bool samplePass = true;
QStringList overMsgs;
- if (okXMin && !(x > xMin)) {
+ if (okXMin && x < xMin) {
samplePass = false;
- overMsgs << QString("X=%1 未满足 X>%2").arg(x, 0, 'f', 3).arg(xMin, 0, 'f', 3);
+ overMsgs << QString("X=%1 未满足 X≥min(%2)").arg(x, 0, 'f', 3).arg(xMin, 0, 'f', 3);
}
- if (okXMax && !(x < xMax)) {
+ if (okXMax && x > xMax) {
samplePass = false;
- overMsgs << QString("X=%1 未满足 X<%2").arg(x, 0, 'f', 3).arg(xMax, 0, 'f', 3);
+ overMsgs << QString("X=%1 未满足 X≤max(%2)").arg(x, 0, 'f', 3).arg(xMax, 0, 'f', 3);
}
- if (okYMin && !(y > yMin)) {
+ if (okYMin && y < yMin) {
samplePass = false;
- overMsgs << QString("Y=%1 未满足 Y>%2").arg(y, 0, 'f', 3).arg(yMin, 0, 'f', 3);
+ overMsgs << QString("Y=%1 未满足 Y≥min(%2)").arg(y, 0, 'f', 3).arg(yMin, 0, 'f', 3);
}
- if (okYMax && !(y < yMax)) {
+ if (okYMax && y > yMax) {
samplePass = false;
- overMsgs << QString("Y=%1 未满足 Y<%2").arg(y, 0, 'f', 3).arg(yMax, 0, 'f', 3);
+ overMsgs << QString("Y=%1 未满足 Y≤max(%2)").arg(y, 0, 'f', 3).arg(yMax, 0, 'f', 3);
}
- if (okZMin && !(z > zMin)) {
+ if (okZMin && z < zMin) {
samplePass = false;
- overMsgs << QString("Z=%1 未满足 Z>%2").arg(z, 0, 'f', 3).arg(zMin, 0, 'f', 3);
+ overMsgs << QString("Z=%1 未满足 Z≥min(%2)").arg(z, 0, 'f', 3).arg(zMin, 0, 'f', 3);
}
- if (okZMax && !(z < zMax)) {
+ if (okZMax && z > zMax) {
samplePass = false;
- overMsgs << QString("Z=%1 未满足 Z<%2").arg(z, 0, 'f', 3).arg(zMax, 0, 'f', 3);
+ overMsgs << QString("Z=%1 未满足 Z≤max(%2)").arg(z, 0, 'f', 3).arg(zMax, 0, 'f', 3);
}
if (!samplePass) {
.arg(overMsgs.join("; "))
.arg(x, 0, 'f', 3).arg(y, 0, 'f', 3).arg(z, 0, 'f', 3));
}
+
+ gSensorValidSampleCount++;
+ ui->statusbar->showMessage(QString("G-sensor 已采 %1/5 帧").arg(gSensorValidSampleCount), 1500);
+ if (gSensorValidSampleCount >= 5) {
+ stopGsensorCollectionAndFinalizeSoon(QStringLiteral("，已采满5帧"));
+ }
}
}
}
}
-// 10秒到时：发送GSENSORTEST=0并计算变化
-void MainWindow::onGsensorIntervalTimeout()
+void MainWindow::stopGsensorCollectionAndFinalizeSoon(const QString& reasonSuffix)
{
if (!isProductionTestRunning || currentTestStep != TEST_GSENSOR) {
return;
}
-
+ if (!gSensorCollecting) {
+ return;
+ }
+ gSensorCollecting = false;
gSensorIntervalTimer->stop();
if (serial && serial->isOpen()) {
- ui->recvTextEdit->append(">>> 发送指令: AT^GSENSORTEST=0 (停止检测与打印)");
+ appendToLogFile(QString(">>> 发送指令: AT^GSENSORTEST=0 (停止检测与打印%1)\n").arg(reasonSuffix));
serial->write("AT^GSENSORTEST=0\r\n");
- qDebug() << "发送指令: AT^GSENSORTEST=0";
+ qDebug() << "发送指令: AT^GSENSORTEST=0" << reasonSuffix;
}
- // 给设备一点时间把最后一行XYZ打印出来
QTimer::singleShot(500, this, [this]() {
if (!isProductionTestRunning || currentTestStep != TEST_GSENSOR) {
return;
}
- gSensorCollecting = false;
finalizeGsensorTest();
});
}
-// 结束G-sensor判定：每条采样的瞬时 X/Y/Z 对已配置边界满足严格开区间 min < 值 < max
+// 采集超时：发送GSENSORTEST=0并结束判定
+void MainWindow::onGsensorIntervalTimeout()
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_GSENSOR) {
+ return;
+ }
+ stopGsensorCollectionAndFinalizeSoon(QStringLiteral("，采集超时"));
+}
+
+// 结束G-sensor判定：每条采样的瞬时 X/Y/Z 对已配置边界满足闭区间 min ≤ 值 ≤ max
void MainWindow::finalizeGsensorTest()
{
if (!isProductionTestRunning || currentTestStep != TEST_GSENSOR) {
}
if (!gSensorAnySample) {
- ui->statusbar->showMessage("G-sensor测试失败：10秒内未采到XYZ数据", 3000);
+ ui->statusbar->showMessage("G-sensor测试失败：未采到有效XYZ（5帧/5秒内）", 3000);
updateTestStatus("gsensor", STATUS_FAILED);
skipToNextEnabledTest();
return;
}
if (gSensorAllSamplesInRange) {
- ui->statusbar->showMessage("G-sensor测试通过：10秒内各采样瞬时XYZ均满足已配置开区间", 3000);
+ ui->statusbar->showMessage("G-sensor测试通过：各采样瞬时XYZ均满足闭区间[min,max]", 3000);
updateTestStatus("gsensor", STATUS_SUCCESS);
} else {
- ui->statusbar->showMessage("G-sensor测试失败：存在瞬时XYZ超出开区间(min,max)的采样（见日志）", 3000);
+ ui->statusbar->showMessage("G-sensor测试失败：存在瞬时XYZ超出闭区间的采样（见日志）", 3000);
updateTestStatus("gsensor", STATUS_FAILED);
}
configManager.setTestCheckbox("sechip", ui->checkBox_sechip->isChecked());
configManager.setTestCheckbox("gps", ui->checkBox_gps->isChecked());
- // 保存G-sensor XYZ变化标准（10秒）
+ // 保存G-sensor XYZ范围参数
configManager.setTestConfig("gsensorDeltaXMin", ui->gsensorDeltaXMinLineEdit->text());
configManager.setTestConfig("gsensorDeltaXMax", ui->gsensorDeltaXMaxLineEdit->text());
configManager.setTestConfig("gsensorDeltaYMin", ui->gsensorDeltaYMinLineEdit->text());
ui->checkBox_sechip->setChecked(configManager.getTestCheckbox("sechip", true));
ui->checkBox_gps->setChecked(configManager.getTestCheckbox("gps", true));
- // 恢复G-sensor XYZ变化标准（10秒）
+ // 恢复G-sensor XYZ范围参数
ui->gsensorDeltaXMinLineEdit->setText(configManager.getTestConfig("gsensorDeltaXMin", ""));
ui->gsensorDeltaXMaxLineEdit->setText(configManager.getTestConfig("gsensorDeltaXMax", ""));
ui->gsensorDeltaYMinLineEdit->setText(configManager.getTestConfig("gsensorDeltaYMin", ""));
skipToNextEnabledTest(); // 递归继续下一个
}
} else if (currentTestStep == TEST_KEY) {
- // 按键测试完成：功耗测试 -> 录音 -> 电池
- if (isTestItemEnabled("deepsleep")) {
- currentTestStep = TEST_DEEPSLEEP;
- qDebug() << "skipToNextEnabledTest: 推进到功耗测试";
- performDeepsleepTest();
- } else if (isTestItemEnabled("mic")) {
- currentTestStep = TEST_AUDIO;
- qDebug() << "skipToNextEnabledTest: 推进到录音测试";
- performAudioTest();
- } else if (isTestItemEnabled("battery")) {
- currentTestStep = TEST_BATTERY;
- performBatteryTest();
- } else {
- qDebug() << "功耗/录音/电池测试均未启用，跳过";
- updateTestStatus("deepsleep", STATUS_UNTESTED);
- updateTestStatus("mic", STATUS_UNTESTED);
- updateTestStatus("battery", STATUS_UNTESTED);
- currentTestStep = TEST_BATTERY;
- skipToNextEnabledTest();
- }
- } else if (currentTestStep == TEST_DEEPSLEEP) {
+ // 按键测试完成：录音 -> 电池（功耗在 GPS 之后）
if (isTestItemEnabled("mic")) {
currentTestStep = TEST_AUDIO;
qDebug() << "skipToNextEnabledTest: 推进到录音测试";
currentTestStep = TEST_BATTERY;
performBatteryTest();
} else {
- qDebug() << "录音和电池测试均未启用，跳过";
+ qDebug() << "录音/电池测试均未启用，跳过";
updateTestStatus("mic", STATUS_UNTESTED);
updateTestStatus("battery", STATUS_UNTESTED);
currentTestStep = TEST_BATTERY;
skipToNextEnabledTest();
}
+ } else if (currentTestStep == TEST_DEEPSLEEP) {
+ // 功耗测试在所有其它项（含 GPS）之后执行，完成后结束产测
+ qDebug() << "skipToNextEnabledTest: 功耗测试完成，结束产测";
+ currentTestStep = TEST_COMPLETED;
+ isProductionTestRunning = false;
+ saveTestRecord();
+ showFinalTestResult();
} else if (currentTestStep == TEST_AUDIO) {
// 录音测试完成，检查电池测试
if (isTestItemEnabled("battery")) {
skipToNextEnabledTest();
}
} else if (currentTestStep == TEST_GPS) {
- // GPS测试完成，所有测试完成
- currentTestStep = TEST_COMPLETED;
- isProductionTestRunning = false;
- saveTestRecord();
- showFinalTestResult();
+ // GPS 之后：若启用功耗测试则最后执行，否则结束
+ if (isTestItemEnabled("deepsleep")) {
+ currentTestStep = TEST_DEEPSLEEP;
+ qDebug() << "skipToNextEnabledTest: GPS 完成，推进到功耗测试（最后一项）";
+ performDeepsleepTest();
+ } else {
+ currentTestStep = TEST_COMPLETED;
+ isProductionTestRunning = false;
+ saveTestRecord();
+ showFinalTestResult();
+ }
} else {
qDebug() << "未知的测试步骤，无法推进";
}
<item>
<widget class="QLabel" name="gsensorDeltaStandardLabel">
<property name="text">
- <string>G-sensor 瞬时XYZ范围：</string>
+ <string>G-sensor 瞬时XYZ（闭区间 min≤值≤max；采满5帧或最长5秒）：</string>
</property>
</widget>
</item>
</layout>
</item>
<item>
- <layout class="QHBoxLayout" name="deepsleepTestLayout">
+ <layout class="QHBoxLayout" name="audioTestLayout">
<property name="spacing">
<number>4</number>
</property>
<item>
- <widget class="QLabel" name="deepsleepTestLabel">
+ <widget class="QLabel" name="audioTestLabel">
<property name="text">
- <string>å\8a\9fè\80\97测试:</string>
+ <string>å½\95é\9f³测试:</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="deepsleepStatusIcon">
+ <widget class="QLabel" name="audioStatusIcon">
<property name="styleSheet">
<string>color: #888888; font-size: 18px; font-weight: bold;</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="deepsleepStatusText">
+ <widget class="QLabel" name="audioStatusText">
<property name="styleSheet">
<string>color: #888888;</string>
</property>
</widget>
</item>
<item>
- <spacer name="deepsleepSpacer">
+ <spacer name="audioSpacer">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
</layout>
</item>
<item>
- <layout class="QHBoxLayout" name="audioTestLayout">
+ <layout class="QHBoxLayout" name="batteryTestLayout">
<property name="spacing">
<number>4</number>
</property>
<item>
- <widget class="QLabel" name="audioTestLabel">
+ <widget class="QLabel" name="batteryTestLabel">
<property name="text">
- <string>录音测试:</string>
+ <string>电池测试:</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="audioStatusIcon">
+ <widget class="QLabel" name="batteryStatusIcon">
<property name="styleSheet">
<string>color: #888888; font-size: 18px; font-weight: bold;</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="audioStatusText">
+ <widget class="QLabel" name="batteryStatusText">
<property name="styleSheet">
<string>color: #888888;</string>
</property>
</widget>
</item>
<item>
- <spacer name="audioSpacer">
+ <spacer name="batterySpacer">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
</layout>
</item>
<item>
- <layout class="QHBoxLayout" name="batteryTestLayout">
+ <layout class="QHBoxLayout" name="gsensorTestLayout">
<property name="spacing">
<number>4</number>
</property>
<item>
- <widget class="QLabel" name="batteryTestLabel">
+ <widget class="QLabel" name="gsensorTestLabel">
<property name="text">
- <string>电池测试:</string>
+ <string>G-sensor:</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="batteryStatusIcon">
+ <widget class="QLabel" name="gsensorStatusIcon">
<property name="styleSheet">
<string>color: #888888; font-size: 18px; font-weight: bold;</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="batteryStatusText">
+ <widget class="QLabel" name="gsensorStatusText">
<property name="styleSheet">
<string>color: #888888;</string>
</property>
</widget>
</item>
<item>
- <spacer name="batterySpacer">
+ <spacer name="gsensorSpacer">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
</layout>
</item>
<item>
- <layout class="QHBoxLayout" name="gsensorTestLayout">
+ <layout class="QHBoxLayout" name="leaklightTestLayout">
<property name="spacing">
<number>4</number>
</property>
<item>
- <widget class="QLabel" name="gsensorTestLabel">
+ <widget class="QLabel" name="leaklightTestLabel">
<property name="text">
- <string>G-sensor:</string>
+ <string>漏光测试:</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="gsensorStatusIcon">
+ <widget class="QLabel" name="leaklightStatusIcon">
<property name="styleSheet">
<string>color: #888888; font-size: 18px; font-weight: bold;</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="gsensorStatusText">
+ <widget class="QLabel" name="leaklightStatusText">
<property name="styleSheet">
<string>color: #888888;</string>
</property>
</widget>
</item>
<item>
- <spacer name="gsensorSpacer">
+ <spacer name="leaklightSpacer">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
</layout>
</item>
<item>
- <layout class="QHBoxLayout" name="leaklightTestLayout">
+ <layout class="QHBoxLayout" name="bluetoothTestLayout">
<property name="spacing">
<number>4</number>
</property>
<item>
- <widget class="QLabel" name="leaklightTestLabel">
+ <widget class="QLabel" name="bluetoothTestLabel">
<property name="text">
- <string>漏光测试:</string>
+ <string>蓝牙测试:</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="leaklightStatusIcon">
+ <widget class="QLabel" name="bluetoothStatusIcon">
<property name="styleSheet">
<string>color: #888888; font-size: 18px; font-weight: bold;</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="leaklightStatusText">
+ <widget class="QLabel" name="bluetoothStatusText">
<property name="styleSheet">
<string>color: #888888;</string>
</property>
</widget>
</item>
<item>
- <spacer name="leaklightSpacer">
+ <spacer name="bluetoothSpacer">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
</layout>
</item>
<item>
- <layout class="QHBoxLayout" name="bluetoothTestLayout">
+ <layout class="QHBoxLayout" name="sechipTestLayout">
<property name="spacing">
<number>4</number>
</property>
<item>
- <widget class="QLabel" name="bluetoothTestLabel">
+ <widget class="QLabel" name="sechipTestLabel">
<property name="text">
- <string>蓝牙测试:</string>
+ <string>SE芯片测试:</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="bluetoothStatusIcon">
+ <widget class="QLabel" name="sechipStatusIcon">
<property name="styleSheet">
<string>color: #888888; font-size: 18px; font-weight: bold;</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="bluetoothStatusText">
+ <widget class="QLabel" name="sechipStatusText">
<property name="styleSheet">
<string>color: #888888;</string>
</property>
</widget>
</item>
<item>
- <spacer name="bluetoothSpacer">
+ <spacer name="sechipSpacer">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
</layout>
</item>
<item>
- <layout class="QHBoxLayout" name="sechipTestLayout">
+ <layout class="QHBoxLayout" name="gpsTestLayout">
<property name="spacing">
<number>4</number>
</property>
<item>
- <widget class="QLabel" name="sechipTestLabel">
+ <widget class="QLabel" name="gpsTestLabel">
<property name="text">
- <string>SE芯片测试:</string>
+ <string>GPS测试:</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="sechipStatusIcon">
+ <widget class="QLabel" name="gpsStatusIcon">
<property name="styleSheet">
<string>color: #888888; font-size: 18px; font-weight: bold;</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="sechipStatusText">
+ <widget class="QLabel" name="gpsStatusText">
<property name="styleSheet">
<string>color: #888888;</string>
</property>
</widget>
</item>
<item>
- <spacer name="sechipSpacer">
+ <spacer name="gpsSpacer">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
</layout>
</item>
<item>
- <layout class="QHBoxLayout" name="gpsTestLayout">
+ <layout class="QHBoxLayout" name="deepsleepTestLayout">
<property name="spacing">
<number>4</number>
</property>
<item>
- <widget class="QLabel" name="gpsTestLabel">
+ <widget class="QLabel" name="deepsleepTestLabel">
<property name="text">
- <string>GPS测试:</string>
+ <string>功耗测试:</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="gpsStatusIcon">
+ <widget class="QLabel" name="deepsleepStatusIcon">
<property name="styleSheet">
<string>color: #888888; font-size: 18px; font-weight: bold;</string>
</property>
</widget>
</item>
<item>
- <widget class="QLabel" name="gpsStatusText">
+ <widget class="QLabel" name="deepsleepStatusText">
<property name="styleSheet">
<string>color: #888888;</string>
</property>
</widget>
</item>
<item>
- <spacer name="gpsSpacer">
+ <spacer name="deepsleepSpacer">
<property name="orientation">
<enum>Qt::Horizontal</enum>
</property>
</widget>
</item>
<item row="7" column="0">
- <widget class="QCheckBox" name="checkBox_deepsleep">
+ <widget class="QCheckBox" name="checkBox_gps">
<property name="text">
- <string>功耗测试</string>
+ <string>GPS测试</string>
</property>
</widget>
</item>
- <item row="7" column="1">
- <widget class="QCheckBox" name="checkBox_gps">
+ <item row="8" column="0">
+ <widget class="QCheckBox" name="checkBox_deepsleep">
<property name="text">
- <string>GPS测试</string>
+ <string>功耗测试</string>
</property>
</widget>
</item>
- </layout>
+ </layout>
</item>
<item>
<widget class="Line" name="line_7">
projects / mirrors / factory_tool.git / commitdiff