#if PROJECT_NAME_G3_K01
#define LV_INDEV_DEF_X_SLIDING_SPEED 50
#endif
+
+#if PROJECT_NAME_G3_C06S
+#define LV_INDEV_DEF_X_SLIDING_SPEED 100
+#endif
+
/*Long press time in milliseconds.
*Time to send `LV_EVENT_LONG_PRESSSED`)*/
#define LV_INDEV_DEF_LONG_PRESS_TIME 400
import osTimer
import constants
import sms
+import urandom
from common import Lock, Abstract, LogAdapter
#from location import GPS, GPSMatch,CellLocator
from misc import USB, Power, ADC
self.dev_state = 0
+ self.temp_warning = 0
+
self.charge_full_count = 0
self.GPS_step_t = 0#记录步数
self.usb = USB()
EventMesh.subscribe(constants.EVENT.STOP_TEMP, self.stop_temp)
EventMesh.subscribe(constants.EVENT.GET_TEMP, self.get_temp)
+ EventMesh.subscribe("optimize_temp",self.optimize_temp)
+
print("post_processor_after_instantiation:2")
self.timer_push_schedule.start(10000, 1, self.publish_event_cb)
# self.timer_pusht_test.start(2000, 1, self.publish_test)
def set_dev_state(self, event, msg):
self.dev_state = msg
+ def optimize_temp(self,event,msg):
+ temp = EventMesh.publish(constants.EVENT.GET_TEMP)
+ temp += 0.5
+ get_temp_time = EventMesh.publish("get_temp_time")
+ print("temp:{}".format(temp))
+ if temp < 36 :#or temp > 37.5:
+ temp = 36+urandom.random()
+ if temp > 37.5:
+
+ self.temp_warning += 1
+ print("temp_warning:{} get_temp_time{}".format(self.temp_warning,get_temp_time))
+
+ if self.temp_warning < 5:#高温没连续超过3次，和谐成37.5度以下
+ temp = 37+(urandom.randint(1, 4)/10)
+ else:
+ self.temp_warning = 0
+ else:
+ if self.temp_warning>=1:
+ self.temp_warning -= 1
+ if temp >= 40:
+ temp = 40
+ return temp
+
def publish_event_cb(self, *args, **kwargs):
EventMesh.publish("publish_message_event_DeviceInfo",{"func":self.publish_event,"data":0})
def publish_event(self,data):
elif (time_tmp-self.temp_time) >= 60 and self.temp_state == 1:
self.temp_state = 0
self.temp_one_state = 0
- temp = EventMesh.publish(constants.EVENT.GET_TEMP)
- temp += 0.5
- if temp < 25 or temp > 42:
+ temp = EventMesh.publish("optimize_temp")
+ if temp == None:
temp = 0
+ # temp = EventMesh.publish(constants.EVENT.GET_TEMP)
+ # temp += 0.5
+ # if temp < 25 or temp > 42:
+ # temp = 0
tmp_f_tmp = 0
tmp_d_tmp = 0
if str(temp).find(".") != -1:
EventMesh.publish(constants.EVENT.START_TEMP)
elif self.temp_one_state > 6:
self.temp_one_state = 0
- temp = EventMesh.publish(constants.EVENT.GET_TEMP)
- temp += 0.5
- if temp < 25 or temp > 42:
+ # temp = EventMesh.publish(constants.EVENT.GET_TEMP)
+ # temp += 0.5
+ # if temp < 25 or temp > 42:
+ # temp = 0
+ temp = EventMesh.publish("optimize_temp")
+ if temp == None:
temp = 0
tmp_f_tmp = 0
tmp_d_tmp = 0
EventMesh.publish(constants.EVENT.START_TEMP)
elif self.temp_one_state > 6:
self.temp_one_state = 0
- temp = EventMesh.publish(constants.EVENT.GET_TEMP)
- temp += 0.5
- if temp < 25 or temp > 42:
+ # temp = EventMesh.publish(constants.EVENT.GET_TEMP)
+ # temp += 0.5
+ # if temp < 25 or temp > 42:
+ # temp = 0
+ temp = EventMesh.publish("optimize_temp")
+ if temp == None:
temp = 0
tmp_f_tmp = 0
tmp_d_tmp = 0
if get_temp_state == 2 or get_temp_state == 3:
self.temp_one_state = 0
self.temp_state = 0
- temp = EventMesh.publish(constants.EVENT.GET_TEMP)
- temp += 0.5
- if temp < 25 or temp > 42:
+ # temp = EventMesh.publish(constants.EVENT.GET_TEMP)
+ # temp += 0.5
+ # if temp < 25 or temp > 42:
+ # temp = 0
+ temp = EventMesh.publish("optimize_temp")
+ if temp == None:
temp = 0
tmp_f_tmp = 0
tmp_d_tmp = 0
watchface3_res_stat_battery_line = lv.line(Watchface3)
watchface3_res_stat_battery_line.set_points(power_line_points,2)
watchface3_res_stat_battery_line.set_pos(int(188),int(20))
-watchface3_res_stat_battery_line.set_size(0,10)#高度12
+watchface3_res_stat_battery_line.set_size(0,12)#高度12
watchface3_res_stat_battery_line.add_style(power_line_red,0)
#时间
watchface3_res_stat_battery_line.set_size(int(line_len),int(10))
watchface3_res_stat_battery_line.set_pos(int(188),int(21))
watchface3_res_stat_battery_line.set_points(line_points, 2)
- watchface3_res_stat_battery_line.set_style_line_width(15,lv.PART.MAIN)
+ watchface3_res_stat_battery_line.set_style_line_width(16,lv.PART.MAIN)
# watchface3_res_stat_battery_line.set_pos(int(set_x),int(18))
self.point = self.point + 1
EventMesh.publish("system_sleep_rest")#防止黑屏
WEAR = EventMesh.publish(constants.EVENT.GET_WEAR)#佩戴数据
- temp = EventMesh.publish(constants.EVENT.GET_TEMP)
- temp += 0.5
- if temp < 25 or temp > 42:
+ temp = EventMesh.publish("optimize_temp")
+ if temp == None:
temp = 0
- if str(temp).find(".") != -1:
- tmp = str(temp).split('.')[0] + '.' + str(temp).split('.')[1][:1]#获取小数点后一位 舍去小数点最后一位
- else:
- tmp = temp#获取小数点后一位 舍去小数点最后一位
+ # temp = EventMesh.publish(constants.EVENT.GET_TEMP)
+ # temp += 0.5
+ # if temp < 25 or temp > 42:
+ # temp = 0
+ # if str(temp).find(".") != -1:
+ # tmp = str(temp).split('.')[0] + '.' + str(temp).split('.')[1][:1]#获取小数点后一位 舍去小数点最后一位
+ # else:
+ # tmp = temp#获取小数点后一位 舍去小数点最后一位
# print("self.temp:{}".format(temp))
+
if self.point >= 10 :
if temp != 0 :
- temperature_bpm_label.set_text("{}℃".format(tmp))
+ data = temp
+ if str(temp).find(".") != -1:
+ tmp_data1 = str(temp).split('.')[0]
+
+ tmp_data2= str(temp).split('.')[1][:1]
+
+ data = str(tmp_data1)+"."+str(tmp_data2)
+
+ temperature_bpm_label.set_text("{} ℃".format(data))
else:
temperature_bpm_label.set_text("- -℃")
import constants
from misc import Power
import pm
-from ui import Screen,style_screen,style_font_youyuan_20
+from ui import Screen,style_screen,style_font_youyuan_20,style_font_youyuan_20_black
from ui_WatchFaceScreen import WatchFace
from lcd import LCD_SIZE_W,LCD_SIZE_H
MAIN_ICON_SZIE = 120 #菜单界面图片的大小
label_text.set_size(0, 0)
label_text.set_text("{}".format(MainMenu1_num))
MainMenu1_img_contacts = lv.img(MainMenu1_one)
-MainMenu1_img_contacts.set_size(THEME1_ICON_X,THEME1_ICON_X)
-MainMenu1_img_contacts.set_pos(MAIN1_ICON_X,MAIN1_ICON_Y+5)
+# MainMenu1_img_contacts.set_size(THEME1_ICON_X,THEME1_ICON_X)
+MainMenu1_img_contacts.set_size(240,282)
+MainMenu1_img_contacts.set_pos(0,0)
MainMenu1_img_contacts.set_src("U:/static/theme1/THEME1_CONTACTS.png")
-MainMenu1_img_contacts.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_contacts.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_contacts.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
MainMenu1_img_contacts_text = lv.label(MainMenu1_one)
-MainMenu1_img_contacts_text.set_pos(int(8),int(104+5))
-MainMenu1_img_contacts_text.set_size(LCD_SIZE_W//2-8,30)
-# MainMenu1_img_contacts_text.add_flag(lv.obj.FLAG.CLICKABLE)
+MainMenu1_img_contacts_text.set_pos(int(MAIN1_ICON_X),int(MAIN1_ICON_Y+5))
+MainMenu1_img_contacts_text.set_size(THEME1_ICON_X,THEME1_ICON_X)
+MainMenu1_img_contacts_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_contacts_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_contacts_text.set_text("联系人")
-MainMenu1_img_contacts_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+MainMenu1_img_contacts_text.set_text(" ")
+MainMenu1_img_contacts_text.add_style(style_font_youyuan_20_black, lv.PART.MAIN|lv.STATE.DEFAULT)
-MainMenu1_img_sms= lv.img(MainMenu1_one)
-MainMenu1_img_sms.set_size(THEME1_ICON_X,THEME1_ICON_Y)
-MainMenu1_img_sms.set_pos(MAIN1_ICON_X*2+85,MAIN1_ICON_Y+5)
-MainMenu1_img_sms.set_src("U:/static/theme1/THEME1_SMS.png")
-MainMenu1_img_sms.add_flag(lv.obj.FLAG.CLICKABLE)
-MainMenu1_img_sms.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
+# MainMenu1_img_sms= lv.img(MainMenu1_one)
+# MainMenu1_img_sms.set_size(THEME1_ICON_X,THEME1_ICON_Y)
+# MainMenu1_img_sms.set_pos(MAIN1_ICON_X*2+85,MAIN1_ICON_Y+5)
+# # MainMenu1_img_sms.set_src("U:/static/theme1/THEME1_SMS.png")
+# MainMenu1_img_sms.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_sms.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
MainMenu1_img_sms_text = lv.label(MainMenu1_one)
-MainMenu1_img_sms_text.set_pos(int(120),int(104+5))
-MainMenu1_img_sms_text.set_size(LCD_SIZE_W//2,30)
-# MainMenu1_img_sms_text.add_flag(lv.obj.FLAG.CLICKABLE)
+MainMenu1_img_sms_text.set_pos(int(MAIN1_ICON_X*2+85),int(MAIN1_ICON_Y+5))
+MainMenu1_img_sms_text.set_size(THEME1_ICON_X,THEME1_ICON_X)
+MainMenu1_img_sms_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_sms_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_sms_text.set_text("短信")
-MainMenu1_img_sms_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+MainMenu1_img_sms_text.set_text(" ")
+MainMenu1_img_sms_text.add_style(style_font_youyuan_20_black, lv.PART.MAIN|lv.STATE.DEFAULT)
-MainMenu1_img_phone = lv.img(MainMenu1_one)
-MainMenu1_img_phone.set_size(THEME1_ICON_X,THEME1_ICON_Y)
-MainMenu1_img_phone.set_pos(MAIN1_ICON_X,140+5)
-MainMenu1_img_phone.set_src("U:/static/theme1/THEME1_PHONE.png")
-MainMenu1_img_phone.add_flag(lv.obj.FLAG.CLICKABLE)
-MainMenu1_img_phone.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
+# MainMenu1_img_phone = lv.img(MainMenu1_one)
+# MainMenu1_img_phone.set_size(THEME1_ICON_X,THEME1_ICON_Y)
+# MainMenu1_img_phone.set_pos(MAIN1_ICON_X,140+5)
+# # MainMenu1_img_phone.set_src("U:/static/theme1/THEME1_PHONE.png")
+# MainMenu1_img_phone.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_phone.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
MainMenu1_img_phone_text = lv.label(MainMenu1_one)
-MainMenu1_img_phone_text.set_pos(int(5),int(232+5))
-MainMenu1_img_phone_text.set_size(LCD_SIZE_W//2-5,30)
-# MainMenu1_img_sms_text.add_flag(lv.obj.FLAG.CLICKABLE)
+MainMenu1_img_phone_text.set_pos(int(MAIN1_ICON_X),int(140+5))
+MainMenu1_img_phone_text.set_size(THEME1_ICON_X,THEME1_ICON_X)
+MainMenu1_img_phone_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_phone_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_phone_text.set_text("拨号盘")
-MainMenu1_img_phone_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+MainMenu1_img_phone_text.set_text(" ")
+MainMenu1_img_phone_text.add_style(style_font_youyuan_20_black, lv.PART.MAIN|lv.STATE.DEFAULT)
-MainMenu1_img_calllog = lv.img(MainMenu1_one)
-MainMenu1_img_calllog.set_size(THEME1_ICON_X,THEME1_ICON_Y)
-MainMenu1_img_calllog.set_pos(MAIN1_ICON_X*2+85,140+5)
-MainMenu1_img_calllog.set_src("U:/static/theme1/THEME1_CALLLOG.png")
-MainMenu1_img_calllog.add_flag(lv.obj.FLAG.CLICKABLE)
-MainMenu1_img_calllog.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
+# MainMenu1_img_calllog = lv.img(MainMenu1_one)
+# MainMenu1_img_calllog.set_size(THEME1_ICON_X,THEME1_ICON_Y)
+# MainMenu1_img_calllog.set_pos(MAIN1_ICON_X*2+85,140+5)
+# # MainMenu1_img_calllog.set_src("U:/static/theme1/THEME1_CALLLOG.png")
+# MainMenu1_img_calllog.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_calllog.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
MainMenu1_img_calllog_text = lv.label(MainMenu1_one)
-MainMenu1_img_calllog_text.set_pos(int(120),int(232+5))
-MainMenu1_img_calllog_text.set_size(LCD_SIZE_W//2,30)
-# MainMenu1_img_calllog_text.add_flag(lv.obj.FLAG.CLICKABLE)
+MainMenu1_img_calllog_text.set_pos(int(MAIN1_ICON_X*2+85),int(140+5))
+MainMenu1_img_calllog_text.set_size(THEME1_ICON_X,THEME1_ICON_X)
+MainMenu1_img_calllog_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_calllog_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_calllog_text.set_text("通话记录")
-MainMenu1_img_calllog_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+MainMenu1_img_calllog_text.set_text(" ")
+MainMenu1_img_calllog_text.add_style(style_font_youyuan_20_black, lv.PART.MAIN|lv.STATE.DEFAULT)
MainMenu1_num+=1
MainMenu1x+=1
MainMenu1_img_hr = lv.img(MainMenu1_two)
-MainMenu1_img_hr.set_size(THEME1_ICON_X,THEME1_ICON_X)
-MainMenu1_img_hr.set_pos(MAIN1_ICON_X,MAIN1_ICON_Y+5)
+MainMenu1_img_hr.set_size(240,282)
+MainMenu1_img_hr.set_pos(0,0)
MainMenu1_img_hr.set_src("U:/static/theme1/THEME1_HEART.png")
-MainMenu1_img_hr.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_hr.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_hr.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
MainMenu1_img_hr_text = lv.label(MainMenu1_two)
-MainMenu1_img_hr_text.set_pos(int(5),int(104+5))
-MainMenu1_img_hr_text.set_size(LCD_SIZE_W//2-5,30)
-# MainMenu1_img_contacts_text.add_flag(lv.obj.FLAG.CLICKABLE)
+MainMenu1_img_hr_text.set_pos(int(MAIN1_ICON_X),int(MAIN1_ICON_Y+5))
+MainMenu1_img_hr_text.set_size(THEME1_ICON_X,THEME1_ICON_X)
+MainMenu1_img_hr_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_hr_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_hr_text.set_text("心率")
-MainMenu1_img_hr_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+MainMenu1_img_hr_text.set_text(" ")
+MainMenu1_img_hr_text.add_style(style_font_youyuan_20_black, lv.PART.MAIN|lv.STATE.DEFAULT)
-MainMenu1_img_spo2 = lv.img(MainMenu1_two)
-MainMenu1_img_spo2.set_size(THEME1_ICON_X,THEME1_ICON_Y)
-MainMenu1_img_spo2.set_pos(MAIN1_ICON_X*2+85,MAIN1_ICON_Y+5)
-MainMenu1_img_spo2.set_src("U:/static/theme1/THEME1_SPO2.png")
-MainMenu1_img_spo2.add_flag(lv.obj.FLAG.CLICKABLE)
-MainMenu1_img_spo2.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
+# MainMenu1_img_spo2 = lv.img(MainMenu1_two)
+# MainMenu1_img_spo2.set_size(THEME1_ICON_X,THEME1_ICON_Y)
+# MainMenu1_img_spo2.set_pos(MAIN1_ICON_X*2+85,MAIN1_ICON_Y+5)
+# MainMenu1_img_spo2.set_src("U:/static/theme1/THEME1_SPO2.png")
+# MainMenu1_img_spo2.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_spo2.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
MainMenu1_img_spo2_text = lv.label(MainMenu1_two)
-MainMenu1_img_spo2_text.set_pos(int(120),int(104+5))
-MainMenu1_img_spo2_text.set_size(LCD_SIZE_W//2,30)
-# MainMenu1_img_spo2_text.add_flag(lv.obj.FLAG.CLICKABLE)
+MainMenu1_img_spo2_text.set_pos(int(MAIN1_ICON_X*2+85),int(MAIN1_ICON_Y+5))
+MainMenu1_img_spo2_text.set_size(THEME1_ICON_X,THEME1_ICON_X)
+MainMenu1_img_spo2_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_spo2_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_spo2_text.set_text("血氧")
-MainMenu1_img_spo2_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+MainMenu1_img_spo2_text.set_text(" ")
+MainMenu1_img_spo2_text.add_style(style_font_youyuan_20_black, lv.PART.MAIN|lv.STATE.DEFAULT)
-MainMenu1_img_blood = lv.img(MainMenu1_two)
-MainMenu1_img_blood.set_size(THEME1_ICON_X,THEME1_ICON_Y)
-MainMenu1_img_blood.set_pos(MAIN1_ICON_X,140+5)
-MainMenu1_img_blood.set_src("U:/static/theme1/THEME1_BLOOD_PRESSURE.png")
-MainMenu1_img_blood.add_flag(lv.obj.FLAG.CLICKABLE)
-MainMenu1_img_blood.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
+# MainMenu1_img_blood = lv.img(MainMenu1_two)
+# MainMenu1_img_blood.set_size(THEME1_ICON_X,THEME1_ICON_Y)
+# MainMenu1_img_blood.set_pos(MAIN1_ICON_X,140+5)
+# MainMenu1_img_blood.set_src("U:/static/theme1/THEME1_BLOOD_PRESSURE.png")
+# MainMenu1_img_blood.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_blood.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
MainMenu1_img_blood_text = lv.label(MainMenu1_two)
-MainMenu1_img_blood_text.set_pos(int(5),int(232+5))
-MainMenu1_img_blood_text.set_size(LCD_SIZE_W//2-5,30)
-# MainMenu1_img_blood_text.add_flag(lv.obj.FLAG.CLICKABLE)
+MainMenu1_img_blood_text.set_pos(int(MAIN1_ICON_X),int(140+5))
+MainMenu1_img_blood_text.set_size(THEME1_ICON_X,THEME1_ICON_X)
+MainMenu1_img_blood_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_blood_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_blood_text.set_text("血压")
-MainMenu1_img_blood_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+MainMenu1_img_blood_text.set_text(" ")
+MainMenu1_img_blood_text.add_style(style_font_youyuan_20_black, lv.PART.MAIN|lv.STATE.DEFAULT)
-MainMenu1_img_temp = lv.img(MainMenu1_two)
-MainMenu1_img_temp.set_size(THEME1_ICON_X,THEME1_ICON_Y)
-MainMenu1_img_temp.set_pos(MAIN1_ICON_X*2+85,140+5)
-MainMenu1_img_temp.set_src("U:/static/theme1/THEME1_TEMP.png")
-MainMenu1_img_temp.add_flag(lv.obj.FLAG.CLICKABLE)
-MainMenu1_img_temp.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
+# MainMenu1_img_temp = lv.img(MainMenu1_two)
+# MainMenu1_img_temp.set_size(THEME1_ICON_X,THEME1_ICON_Y)
+# MainMenu1_img_temp.set_pos(MAIN1_ICON_X*2+85,140+5)
+# MainMenu1_img_temp.set_src("U:/static/theme1/THEME1_TEMP.png")
+# MainMenu1_img_temp.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_temp.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
MainMenu1_img_temp_text = lv.label(MainMenu1_two)
-MainMenu1_img_temp_text.set_pos(int(115),int(232+5))
-MainMenu1_img_temp_text.set_size(LCD_SIZE_W//2,30)
-# MainMenu1_img_temp_text.add_flag(lv.obj.FLAG.CLICKABLE)
+MainMenu1_img_temp_text.set_pos(int(MAIN1_ICON_X*2+85),int(140+5))
+MainMenu1_img_temp_text.set_size(THEME1_ICON_X,THEME1_ICON_X)
+MainMenu1_img_temp_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_temp_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_temp_text.set_text("体温")
-MainMenu1_img_temp_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+MainMenu1_img_temp_text.set_text(" ")
+MainMenu1_img_temp_text.add_style(style_font_youyuan_20_black, lv.PART.MAIN|lv.STATE.DEFAULT)
MainMenu1_num+=1
label_text.set_text("{}".format(MainMenu1_num))
MainMenu1_img_wechat = lv.img(MainMenu1_three)
-MainMenu1_img_wechat.set_size(THEME1_ICON_X,THEME1_ICON_X)
-MainMenu1_img_wechat.set_pos(MAIN1_ICON_X,MAIN1_ICON_Y+5)
+MainMenu1_img_wechat.set_size(240,282)
+MainMenu1_img_wechat.set_pos(0,0)
MainMenu1_img_wechat.set_src("U:/static/theme1/THEME1_WECHAT.png")
-MainMenu1_img_wechat.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_wechat.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_wechat.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
MainMenu1_img_wechat_text = lv.label(MainMenu1_three)
-MainMenu1_img_wechat_text.set_pos(int(5),int(104+5))
-MainMenu1_img_wechat_text.set_size(LCD_SIZE_W//2-5,30)
-# MainMenu1_img_wechat_text.add_flag(lv.obj.FLAG.CLICKABLE)
+MainMenu1_img_wechat_text.set_pos(MAIN1_ICON_X,MAIN1_ICON_Y+5)
+MainMenu1_img_wechat_text.set_size(THEME1_ICON_X,THEME1_ICON_X)
+MainMenu1_img_wechat_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_wechat_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_wechat_text.set_text("微聊")
-MainMenu1_img_wechat_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+MainMenu1_img_wechat_text.set_text(" ")
+MainMenu1_img_wechat_text.add_style(style_font_youyuan_20_black, lv.PART.MAIN|lv.STATE.DEFAULT)
-MainMenu1_img_alarm= lv.img(MainMenu1_three)
-MainMenu1_img_alarm.set_size(THEME1_ICON_X,THEME1_ICON_Y)
-MainMenu1_img_alarm.set_pos(MAIN1_ICON_X*2+85,MAIN1_ICON_Y+5)
-MainMenu1_img_alarm.set_src("U:/static/theme1/THEME1_ALARM.png")
-MainMenu1_img_alarm.add_flag(lv.obj.FLAG.CLICKABLE)
-MainMenu1_img_alarm.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
+# MainMenu1_img_alarm= lv.img(MainMenu1_three)
+# MainMenu1_img_alarm.set_size(THEME1_ICON_X,THEME1_ICON_Y)
+# MainMenu1_img_alarm.set_pos(MAIN1_ICON_X*2+85,MAIN1_ICON_Y+5)
+# MainMenu1_img_alarm.set_src("U:/static/theme1/THEME1_ALARM.png")
+# MainMenu1_img_alarm.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_alarm.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
MainMenu1_img_alarm_text = lv.label(MainMenu1_three)
-MainMenu1_img_alarm_text.set_pos(int(120),int(104+5))
-MainMenu1_img_alarm_text.set_size(LCD_SIZE_W//2,30)
-# MainMenu1_img_alarm_text.add_flag(lv.obj.FLAG.CLICKABLE)
+MainMenu1_img_alarm_text.set_pos(MAIN1_ICON_X*2+85,MAIN1_ICON_Y+5)
+MainMenu1_img_alarm_text.set_size(THEME1_ICON_X,THEME1_ICON_X)
+MainMenu1_img_alarm_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_alarm_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_alarm_text.set_text("闹钟")
-MainMenu1_img_alarm_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+MainMenu1_img_alarm_text.set_text(" ")
+MainMenu1_img_alarm_text.add_style(style_font_youyuan_20_black, lv.PART.MAIN|lv.STATE.DEFAULT)
-MainMenu1_img_stopwatch = lv.img(MainMenu1_three)
-MainMenu1_img_stopwatch.set_size(THEME1_ICON_X,THEME1_ICON_Y)
-MainMenu1_img_stopwatch.set_pos(MAIN1_ICON_X,140+5)
-MainMenu1_img_stopwatch.set_src("U:/static/theme1/THEME1_STOPWATCH.png")
-MainMenu1_img_stopwatch.add_flag(lv.obj.FLAG.CLICKABLE)
-MainMenu1_img_stopwatch.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
+# MainMenu1_img_stopwatch = lv.img(MainMenu1_three)
+# MainMenu1_img_stopwatch.set_size(THEME1_ICON_X,THEME1_ICON_Y)
+# MainMenu1_img_stopwatch.set_pos(MAIN1_ICON_X,140+5)
+# MainMenu1_img_stopwatch.set_src("U:/static/theme1/THEME1_STOPWATCH.png")
+# MainMenu1_img_stopwatch.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_stopwatch.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
MainMenu1_img_stopwatch_text = lv.label(MainMenu1_three)
-MainMenu1_img_stopwatch_text.set_pos(int(5),int(232+5))
-MainMenu1_img_stopwatch_text.set_size(LCD_SIZE_W//2-5,30)
-# MainMenu1_img_stopwatch_text.add_flag(lv.obj.FLAG.CLICKABLE)
+MainMenu1_img_stopwatch_text.set_pos(MAIN1_ICON_X,140+5)
+MainMenu1_img_stopwatch_text.set_size(THEME1_ICON_X,THEME1_ICON_Y)
+MainMenu1_img_stopwatch_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_stopwatch_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_stopwatch_text.set_text("秒表")
-MainMenu1_img_stopwatch_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+MainMenu1_img_stopwatch_text.set_text(" ")
+MainMenu1_img_stopwatch_text.add_style(style_font_youyuan_20_black, lv.PART.MAIN|lv.STATE.DEFAULT)
-MainMenu1_img_countdown = lv.img(MainMenu1_three)
-MainMenu1_img_countdown.set_size(THEME1_ICON_X,THEME1_ICON_Y)
-MainMenu1_img_countdown.set_pos(MAIN1_ICON_X*2+85,140+5)
-MainMenu1_img_countdown.set_src("U:/static/theme1/THEME1_COUNTDOWN.png")
-MainMenu1_img_countdown.add_flag(lv.obj.FLAG.CLICKABLE)
-MainMenu1_img_countdown.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
+# MainMenu1_img_countdown = lv.img(MainMenu1_three)
+# MainMenu1_img_countdown.set_size(THEME1_ICON_X,THEME1_ICON_Y)
+# MainMenu1_img_countdown.set_pos(MAIN1_ICON_X*2+85,140+5)
+# MainMenu1_img_countdown.set_src("U:/static/theme1/THEME1_COUNTDOWN.png")
+# MainMenu1_img_countdown.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_countdown.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
MainMenu1_img_countdown_text = lv.label(MainMenu1_three)
-MainMenu1_img_countdown_text.set_pos(int(120),int(232+5))
-MainMenu1_img_countdown_text.set_size(LCD_SIZE_W//2,30)
-# MainMenu1_img_countdown_text.add_flag(lv.obj.FLAG.CLICKABLE)
+MainMenu1_img_countdown_text.set_pos(MAIN1_ICON_X*2+85,140+5)
+MainMenu1_img_countdown_text.set_size(THEME1_ICON_X,THEME1_ICON_Y)
+MainMenu1_img_countdown_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_countdown_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_countdown_text.set_text("倒计时")
-MainMenu1_img_countdown_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+MainMenu1_img_countdown_text.set_text(" ")
+MainMenu1_img_countdown_text.add_style(style_font_youyuan_20_black, lv.PART.MAIN|lv.STATE.DEFAULT)
MainMenu1_num+=1
MainMenu1x+=1
label_text.set_text("{}".format(MainMenu1_num))
MainMenu1_img_toolbox = lv.img(MainMenu1_four)
-MainMenu1_img_toolbox.set_size(THEME1_ICON_X,THEME1_ICON_X)
-MainMenu1_img_toolbox.set_pos(MAIN1_ICON_X,MAIN1_ICON_Y+5)
+MainMenu1_img_toolbox.set_size(240,140)
+MainMenu1_img_toolbox.set_pos(0,0)
MainMenu1_img_toolbox.set_src("U:/static/theme1/THEME1_TOOLBOX.png")
-MainMenu1_img_toolbox.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_toolbox.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_toolbox.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
MainMenu1_img_toolbox_text = lv.label(MainMenu1_four)
-MainMenu1_img_toolbox_text.set_pos(int(5),int(109))
-MainMenu1_img_toolbox_text.set_size(LCD_SIZE_W//2-5,30)
-# MainMenu1_img_toolbox_text.add_flag(lv.obj.FLAG.CLICKABLE)
+MainMenu1_img_toolbox_text.set_pos(MAIN1_ICON_X,MAIN1_ICON_Y+5)
+MainMenu1_img_toolbox_text.set_size(THEME1_ICON_X,THEME1_ICON_X)
+MainMenu1_img_toolbox_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_toolbox_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_toolbox_text.set_text("工具箱")
+MainMenu1_img_toolbox_text.set_text(" ")
MainMenu1_img_toolbox_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
-MainMenu1_img_setting = lv.img(MainMenu1_four)
-MainMenu1_img_setting.set_size(THEME1_ICON_X,THEME1_ICON_X)
-MainMenu1_img_setting.set_pos(MAIN1_ICON_X*2+85,MAIN1_ICON_Y+5)
-MainMenu1_img_setting.set_src("U:/static/theme1/THEME1_SETTING.png")
-MainMenu1_img_setting.add_flag(lv.obj.FLAG.CLICKABLE)
-MainMenu1_img_setting.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
+# MainMenu1_img_setting = lv.img(MainMenu1_four)
+# MainMenu1_img_setting.set_size(THEME1_ICON_X,THEME1_ICON_X)
+# MainMenu1_img_setting.set_pos(MAIN1_ICON_X*2+85,MAIN1_ICON_Y+5)
+# MainMenu1_img_setting.set_src("U:/static/theme1/THEME1_SETTING.png")
+# MainMenu1_img_setting.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_setting.add_style(style_MainMenu_img_default, lv.PART.MAIN | lv.STATE.DEFAULT)
-MainMenu1_img_setting_text = lv.label(MainMenu1_four)
-MainMenu1_img_setting_text.set_pos(int(120),int(104+5))
-MainMenu1_img_setting_text.set_size(LCD_SIZE_W//2-5,30)
+# MainMenu1_img_setting_text = lv.label(MainMenu1_four)
+# MainMenu1_img_setting_text.set_pos(int(120),int(104+5))
+# MainMenu1_img_setting_text.set_size(LCD_SIZE_W//2-5,30)
# MainMenu1_img_setting_text.add_flag(lv.obj.FLAG.CLICKABLE)
+# MainMenu1_img_setting_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
+# MainMenu1_img_setting_text.set_text("设置")
+# MainMenu1_img_setting_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+
+MainMenu1_img_setting_text = lv.label(MainMenu1_four)
+MainMenu1_img_setting_text.set_pos(int(MAIN1_ICON_X*2+85),int(MAIN1_ICON_Y+5))
+MainMenu1_img_setting_text.set_size(THEME1_ICON_X,THEME1_ICON_X)
+MainMenu1_img_setting_text.add_flag(lv.obj.FLAG.CLICKABLE)
MainMenu1_img_setting_text.set_style_text_align(lv.TEXT_ALIGN.CENTER, 0)
-MainMenu1_img_setting_text.set_text("设置")
-MainMenu1_img_setting_text.add_style(style_font_youyuan_20, lv.PART.MAIN|lv.STATE.DEFAULT)
+MainMenu1_img_setting_text.set_text(" ")
+MainMenu1_img_setting_text.add_style(style_font_youyuan_20_black, lv.PART.MAIN|lv.STATE.DEFAULT)
+
+
MainMenu1_num+=1
MainMenu1x+=1
###1
MainMenu1_til.add_event_cb(lambda e: EventMesh.callback_wrapper(self.scroll_begin_event_cb(e)),lv.EVENT.SCROLL_END,None)
#lv_obj_add_event_cb(lv_tabview_get_content(tabview), scroll_begin_event, LV_EVENT_SCROLL_END, NULL);
- MainMenu1_img_contacts.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "contacts")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_contacts.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "contacts")), lv.EVENT.PRESSING, None)
+ # MainMenu1_img_contacts.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "contacts")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_contacts.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "contacts")), lv.EVENT.PRESSING, None)
+
+ # MainMenu1_img_sms.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "popup")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_sms.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "popup")), lv.EVENT.PRESSING, None)
+
+ # MainMenu1_img_phone.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "Phone")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_phone.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "Phone")), lv.EVENT.PRESSING, None)
+
+ # MainMenu1_img_calllog.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "call_log")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_calllog.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "call_log")), lv.EVENT.PRESSING, None)
+
+ # MainMenu1_img_hr.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "heartrate")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_hr.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "heartrate")), lv.EVENT.PRESSING, None)
+
+ # MainMenu1_img_spo2.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "spo2")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_spo2.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "spo2")), lv.EVENT.PRESSING, None)
+
+ # MainMenu1_img_temp.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "temperature")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_temp.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "temperature")), lv.EVENT.PRESSING, None)
+
+ # MainMenu1_img_blood.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "blood_pressure")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_blood.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "blood_pressure")), lv.EVENT.PRESSING, None)
+
+ # MainMenu1_img_wechat.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "wechat")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_wechat.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "wechat")), lv.EVENT.PRESSING, None)
+
+ # MainMenu1_img_alarm.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "clk_list")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_alarm.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "clk_list")), lv.EVENT.PRESSING, None)
+
+ # MainMenu1_img_stopwatch.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "stopwatch")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_stopwatch.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "stopwatch")), lv.EVENT.PRESSING, None)
+
+ # MainMenu1_img_countdown.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "countdown")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_countdown.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "countdown")), lv.EVENT.PRESSING, None)
+
+ # MainMenu1_img_toolbox.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "toolbox")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_toolbox.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "toolbox")), lv.EVENT.PRESSING, None)
+
+ # MainMenu1_img_setting.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "setting")), lv.EVENT.SHORT_CLICKED, None)
+ # MainMenu1_img_setting.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "setting")), lv.EVENT.PRESSING, None)
+
+ MainMenu1_img_contacts_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "contacts")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_contacts_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "contacts")), lv.EVENT.PRESSING, None)
- MainMenu1_img_sms.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "popup")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_sms.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "popup")), lv.EVENT.PRESSING, None)
+ MainMenu1_img_calllog_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "call_log")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_calllog_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "call_log")), lv.EVENT.PRESSING, None)
- MainMenu1_img_phone.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "Phone")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_phone.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "Phone")), lv.EVENT.PRESSING, None)
+ MainMenu1_img_sms_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "popup")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_sms_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "popup")), lv.EVENT.PRESSING, None)
- MainMenu1_img_calllog.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "call_log")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_calllog.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "call_log")), lv.EVENT.PRESSING, None)
+ MainMenu1_img_phone_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "Phone")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_phone_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "Phone")), lv.EVENT.PRESSING, None)
- MainMenu1_img_hr.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "heartrate")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_hr.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "heartrate")), lv.EVENT.PRESSING, None)
+ MainMenu1_img_hr_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "heartrate")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_hr_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "heartrate")), lv.EVENT.PRESSING, None)
- MainMenu1_img_spo2.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "spo2")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_spo2.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "spo2")), lv.EVENT.PRESSING, None)
+ MainMenu1_img_spo2_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "spo2")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_spo2_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "spo2")), lv.EVENT.PRESSING, None)
- MainMenu1_img_temp.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "temperature")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_temp.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "temperature")), lv.EVENT.PRESSING, None)
+ MainMenu1_img_blood_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "blood_pressure")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_blood_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "blood_pressure")), lv.EVENT.PRESSING, None)
- MainMenu1_img_blood.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "blood_pressure")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_blood.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "blood_pressure")), lv.EVENT.PRESSING, None)
+ MainMenu1_img_temp_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "temperature")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_temp_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "temperature")), lv.EVENT.PRESSING, None)
- MainMenu1_img_wechat.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "wechat")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_wechat.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "wechat")), lv.EVENT.PRESSING, None)
+ MainMenu1_img_wechat_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "wechat")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_wechat_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "wechat")), lv.EVENT.PRESSING, None)
- MainMenu1_img_alarm.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "clk_list")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_alarm.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "clk_list")), lv.EVENT.PRESSING, None)
+ MainMenu1_img_alarm_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "clk_list")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_alarm_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "clk_list")), lv.EVENT.PRESSING, None)
- MainMenu1_img_stopwatch.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "stopwatch")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_stopwatch.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "stopwatch")), lv.EVENT.PRESSING, None)
+ MainMenu1_img_stopwatch_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "stopwatch")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_stopwatch_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "stopwatch")), lv.EVENT.PRESSING, None)
- MainMenu1_img_countdown.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "countdown")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_countdown.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "countdown")), lv.EVENT.PRESSING, None)
+ MainMenu1_img_countdown_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "countdown")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_countdown_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "countdown")), lv.EVENT.PRESSING, None)
- MainMenu1_img_toolbox.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "toolbox")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_toolbox.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "toolbox")), lv.EVENT.PRESSING, None)
+ MainMenu1_img_toolbox_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "toolbox")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_toolbox_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "toolbox")), lv.EVENT.PRESSING, None)
- MainMenu1_img_setting.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "setting")), lv.EVENT.SHORT_CLICKED, None)
- MainMenu1_img_setting.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "setting")), lv.EVENT.PRESSING, None)
+ MainMenu1_img_setting_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "setting")), lv.EVENT.SHORT_CLICKED, None)
+ MainMenu1_img_setting_text.add_event_cb(lambda e: EventMesh.callback_wrapper(self.img_cb(e, "setting")), lv.EVENT.PRESSING, None)
##2
print("MainMenu1:__init__")
MainMenu2_til.add_event_cb(lambda e: EventMesh.callback_wrapper(self.scroll_begin_event_cb(e)),lv.EVENT.SCROLL_END,None)
-['R_CALL_mp3']
\ No newline at end of file
+['audio_find_haixiu', 'R_ALARM_NEW', 'R_BLOOD_SUGAR', 'R_CALL_mp3', 'R_CHARGE_FULL', 'R_CHARGE_IN', 'R_CHARGE_OUT', 'R_CUR_BATTERY_LEVEL', 'R_DRINK_ALARM', 'R_FALL_ALARM', 'R_HOME_ALARM', 'R_HSENSOR_RESULT_FAILE', 'R_HSENSOR_RESULT_HR_TITLE', 'R_HSENSOR_RESULT_OK', 'R_HSENSOR_SPO2_TITLE', 'R_HSENSOR_TEMP_TITLE', 'R_MEDICINE_ALARM', 'R_NO_SET_SOS_DIAL', 'R_NO_SIM', 'R_POWER_OFF_1', 'R_READ_STEP_0', 'R_READ_STEP_1', 'R_READ_STEP_2', 'R_READ_STEP_3', 'R_READ_STEP_4', 'R_READ_TIME_0', 'R_READ_TIME_1', 'R_READ_TIME_2', 'R_READ_TIME_3', 'R_READ_TIME_4', 'R_READ_TIME_5', 'R_READ_TIME_6', 'R_READ_TIME_7', 'R_READ_TIME_8', 'R_READ_TIME_9', 'R_READ_TIME_MIN', 'R_READ_TIME_ZHENG', 'R_RESET_ALARM', 'R_RESET_END_ALARM', 'R_SIM_CONNECT', 'R_SIM_FAILE', 'R_SLEEP_ALARM', 'R_SOS_ALERT', 'R_TSENSOR_RESULT_VALUE_DOT', 'R_UNREAD_WECHAT', 'R_WAKEUP_ALARM', 'R_WECHAT_RECV']
\ No newline at end of file
def debug_log(*data):
if debug_Log != 0 :
print(data)
-Txt_Log = 0
+Txt_Log = 1
def txt_log(data):
if Txt_Log != 0 :
print(data)
try:
- f_stat = uos.stat("ext/log.txt")
+ f_stat = uos.stat("usr/log.txt")
if f_stat[6] >50*1024:
- uos.remove("ext/log.txt")
+ uos.remove("usr/log.txt")
except Exception as e:
usys.print_exception(e)
- with open("/ext/log.txt","a",encoding="utf-8") as fd:
+ with open("/usr/log.txt","a",encoding="utf-8") as fd:
d_time = utime.localtime()
data_tmp = "%02d-%02d %02d:%02d:%02d :"%(d_time[1],d_time[2],d_time[3],d_time[4],d_time[5])
fd.write(data_tmp+data+"\n")
def close_motor():
motor_pin.write(0)
- audio_buf = ['audio_find_haixiu', 'R_ALARM_NEW', 'R_BLOOD_SUGAR', 'R_CALL_mp3', 'R_CHARGE_FULL', 'R_CHARGE_IN', 'R_CHARGE_OUT', 'R_DRINK_ALARM', 'R_FALL_ALARM', 'R_HOME_ALARM', 'R_HSENSOR_RESULT_FAILE', 'R_HSENSOR_RESULT_HR_TITLE', 'R_HSENSOR_RESULT_OK', 'R_HSENSOR_SPO2_TITLE', 'R_HSENSOR_TEMP_TITLE', 'R_MEDICINE_ALARM', 'R_NO_SET_SOS_DIAL', 'R_NO_SIM', 'R_POWER_OFF_1', 'R_READ_STEP_0', 'R_READ_STEP_1', 'R_READ_STEP_2', 'R_READ_STEP_3', 'R_READ_STEP_4', 'R_READ_TIME_0', 'R_READ_TIME_1', 'R_READ_TIME_2', 'R_READ_TIME_3', 'R_READ_TIME_4', 'R_READ_TIME_5', 'R_READ_TIME_6', 'R_READ_TIME_7', 'R_READ_TIME_8', 'R_READ_TIME_9', 'R_READ_TIME_MIN', 'R_READ_TIME_ZHENG', 'R_RESET_ALARM', 'R_RESET_END_ALARM', 'R_SIM_CONNECT', 'R_SIM_FAILE', 'R_SLEEP_ALARM', 'R_SOS_ALERT', 'R_TSENSOR_RESULT_VALUE_DOT', 'R_UNREAD_WECHAT', 'R_WAKEUP_ALARM', 'R_WECHAT_RECV']
-
+ audio_buf = ['audio_find_haixiu', 'R_ALARM_NEW', 'R_BLOOD_SUGAR', 'R_CALL_mp3', 'R_CHARGE_FULL', 'R_CHARGE_IN', 'R_CHARGE_OUT', 'R_CUR_BATTERY_LEVEL', 'R_DRINK_ALARM', 'R_FALL_ALARM', 'R_HOME_ALARM', 'R_HSENSOR_RESULT_FAILE', 'R_HSENSOR_RESULT_HR_TITLE', 'R_HSENSOR_RESULT_OK', 'R_HSENSOR_SPO2_TITLE', 'R_HSENSOR_TEMP_TITLE', 'R_MEDICINE_ALARM', 'R_NO_SET_SOS_DIAL', 'R_NO_SIM', 'R_POWER_OFF_1', 'R_READ_STEP_0', 'R_READ_STEP_1', 'R_READ_STEP_2', 'R_READ_STEP_3', 'R_READ_STEP_4', 'R_READ_TIME_0', 'R_READ_TIME_1', 'R_READ_TIME_2', 'R_READ_TIME_3', 'R_READ_TIME_4', 'R_READ_TIME_5', 'R_READ_TIME_6', 'R_READ_TIME_7', 'R_READ_TIME_8', 'R_READ_TIME_9', 'R_READ_TIME_MIN', 'R_READ_TIME_ZHENG', 'R_RESET_ALARM', 'R_RESET_END_ALARM', 'R_SIM_CONNECT', 'R_SIM_FAILE', 'R_SLEEP_ALARM', 'R_SOS_ALERT', 'R_TSENSOR_RESULT_VALUE_DOT', 'R_UNREAD_WECHAT', 'R_WAKEUP_ALARM', 'R_WECHAT_RECV']
class intervManager(Abstract):
def play_audio_file(self, *args, **kwargs):#播放音频文件
# EventMesh.debug_log("args",args)
- EventMesh.publish("publish_message_event_audio",{"func":self.play_audio_file_do,"data":args[1]})
+ # EventMesh.publish("publish_message_event_audio",{"func":self.play_audio_file_do,"data":args[1]})
+ data = args[1]
+ self.play_audio_file_do(data)
def play_audio_file_do(self,data):#msg 拼接的路径文件
open_power = EventMesh.publish("get_power_on_state")#获取开机标识
def dialing_out_event(self, event, msg):#侧边金属按键挂断电话呼叫中
flag = EventMesh.publish("get_call_state")
- if flag == 1:#电话呼叫中
+ if flag == 1 or flag == 3:#电话呼叫中
self.call_state = 0
voiceCall.callEnd()
EventMesh.debug_log("stop debug8")
EventMesh.publish(constants.EVENT.STOP_HEART)
- elif get_spo2_state != 0:
+ if get_spo2_state != 0:
EventMesh.publish("set_spo2_state",0)#2代表后台进入测试
if get_spo2_state == 1:
EventMesh.publish("stop_led_timer")#设置参数
EventMesh.publish(constants.EVENT.STOP_BLOOD_OXYGEN)
EventMesh.debug_log("stop debug13")
- elif get_bp_state != 0:
+ if get_bp_state != 0:
EventMesh.publish("set_bp_state",0)#2代表后台进入测试
if get_bp_state == 1:
EventMesh.publish("stop_led_timer")#设置参数
EventMesh.publish(constants.EVENT.STOP_HEART)
EventMesh.debug_log("stop bp debug1")
- elif get_bg_state != 0:
+ if get_bg_state != 0:
EventMesh.publish("set_bg_state",0)#2代表后台进入测试
if get_bg_state == 1:#手动开灯关闭灯
EventMesh.publish("stop_led_timer")#设置参数
EventMesh.publish("set_temp_state",0)#2代表后台进入测试
if get_temp_state == 1:
EventMesh.publish("stop_led_timer")#设置参数
- EventMesh.publish("get_start_temp_measure_time",0)#
+ EventMesh.publish("set_start_temp_measure_time",0)#
EventMesh.publish(constants.EVENT.STOP_TEMP)
EventMesh.debug_log("stop temp debug14")
if msg == 1:
if msg == 1:
if get_hr_state != 1:#不是手动测试直接打断
EventMesh.debug_log("set_manual_measure_mode",msg)
+ EventMesh.publish("set_spo2_state",0)
+ EventMesh.publish("set_bg_state",0)
+ EventMesh.publish("set_bp_state",0)
+
EventMesh.publish("set_hr_state",1)
+ EventMesh.publish("clear_manual_hr_flag")
EventMesh.publish("set_start_measure_time",1)#设置开始测量的时间戳时间
EventMesh.publish(constants.EVENT.STOP_BLOOD_OXYGEN) #停止测试血氧
EventMesh.publish("set_hr_blood_led",1)
elif msg == 3:
if get_temp_state != 1:
EventMesh.debug_log("set_manual_measure_mode",msg)
+ EventMesh.publish("clear_manual_temp_flag")
EventMesh.publish("set_temp_state",1)
EventMesh.publish("set_start_temp_measure_time",1)#设置开始测量的时间戳时间
EventMesh.publish("set_hr_blood_led",1)
if EventMesh.model == "D15_" :
motor_pin = Pin(Pin.GPIO20, Pin.OUT, Pin.PULL_PD, 0)
- audio_buf = ['audio_find_haixiu', 'R_ALARM_NEW', 'R_BLOOD_SUGAR', 'R_CALL_mp3', 'R_CHARGE_FULL', 'R_CHARGE_IN', 'R_CHARGE_OUT', 'R_DRINK_ALARM', 'R_FALL_ALARM', 'R_HOME_ALARM', 'R_HSENSOR_RESULT_FAILE', 'R_HSENSOR_RESULT_HR_TITLE', 'R_HSENSOR_RESULT_OK', 'R_HSENSOR_SPO2_TITLE', 'R_HSENSOR_TEMP_TITLE', 'R_MEDICINE_ALARM', 'R_NO_SET_SOS_DIAL', 'R_NO_SIM', 'R_POWER_OFF_1', 'R_READ_STEP_0', 'R_READ_STEP_1', 'R_READ_STEP_2', 'R_READ_STEP_3', 'R_READ_STEP_4', 'R_READ_TIME_0', 'R_READ_TIME_1', 'R_READ_TIME_2', 'R_READ_TIME_3', 'R_READ_TIME_4', 'R_READ_TIME_5', 'R_READ_TIME_6', 'R_READ_TIME_7', 'R_READ_TIME_8', 'R_READ_TIME_9', 'R_READ_TIME_MIN', 'R_READ_TIME_ZHENG', 'R_RESET_ALARM', 'R_RESET_END_ALARM', 'R_SIM_CONNECT', 'R_SIM_FAILE', 'R_SLEEP_ALARM', 'R_SOS_ALERT', 'R_TSENSOR_RESULT_VALUE_DOT', 'R_UNREAD_WECHAT', 'R_WAKEUP_ALARM', 'R_WECHAT_RECV']
-
+ audio_buf = ['audio_find_haixiu', 'R_ALARM_NEW', 'R_BLOOD_SUGAR', 'R_CALL_mp3', 'R_CHARGE_FULL', 'R_CHARGE_IN', 'R_CHARGE_OUT', 'R_CUR_BATTERY_LEVEL', 'R_DRINK_ALARM', 'R_FALL_ALARM', 'R_HOME_ALARM', 'R_HSENSOR_RESULT_FAILE', 'R_HSENSOR_RESULT_HR_TITLE', 'R_HSENSOR_RESULT_OK', 'R_HSENSOR_SPO2_TITLE', 'R_HSENSOR_TEMP_TITLE', 'R_MEDICINE_ALARM', 'R_NO_SET_SOS_DIAL', 'R_NO_SIM', 'R_POWER_OFF_1', 'R_READ_STEP_0', 'R_READ_STEP_1', 'R_READ_STEP_2', 'R_READ_STEP_3', 'R_READ_STEP_4', 'R_READ_TIME_0', 'R_READ_TIME_1', 'R_READ_TIME_2', 'R_READ_TIME_3', 'R_READ_TIME_4', 'R_READ_TIME_5', 'R_READ_TIME_6', 'R_READ_TIME_7', 'R_READ_TIME_8', 'R_READ_TIME_9', 'R_READ_TIME_MIN', 'R_READ_TIME_ZHENG', 'R_RESET_ALARM', 'R_RESET_END_ALARM', 'R_SIM_CONNECT', 'R_SIM_FAILE', 'R_SLEEP_ALARM', 'R_SOS_ALERT', 'R_TSENSOR_RESULT_VALUE_DOT', 'R_UNREAD_WECHAT', 'R_WAKEUP_ALARM', 'R_WECHAT_RECV']
class call:
CALL_OUT = 1
CALL_IN = 2
EventMesh.subscribe("play_sugar_value", self.play_sugar_value)#播放血糖数值
+ EventMesh.subscribe("play_battery_level_value", self.play_battery_level_value)
+
EventMesh.subscribe("set_usb", self.set_usb)#
EventMesh.subscribe("get_usb", self.get_usb)#
def play_audio_file(self, *args, **kwargs):#播放音频文件
# EventMesh.debug_log("args",args)
- EventMesh.publish("publish_message_event_audio",{"func":self.play_audio_file_do,"data":args[1]})
+ # EventMesh.publish("publish_message_event_audio",{"func":self.play_audio_file_do,"data":args[1]})
+ data = args[1]
+ self.play_audio_file_do(data)
def play_audio_file_do(self,data):#msg 拼接的路径文件
open_power = EventMesh.publish("get_power_on_state")#获取开机标识
if self.call_state == 0:
self.phone_num = ''
EventMesh.publish("close_timer_all")#
+ EventMesh.publish("set_led_time_arg",[1,2,8,led_mode.FLASH_LIGHT_GREEN,8,4,led_mode.OTHER_MEASURE_MODE])#
if msg == None:
str_data = 'mp3files={}.mp3'.format(audio_buf.index("R_NO_SET_SOS_DIAL"))
EventMesh.publish("play_audio_file",[str_data,1])#获取播放音频文件
def dialing_out_event(self, event, msg):#侧边金属按键挂断电话呼叫中
flag = EventMesh.publish("get_call_state")
- if flag == 1:#电话呼叫中
+ if flag == 1 or flag == 3:#电话呼叫中 或者在正在通话中
self.call_state = 0
voiceCall.callEnd()
EventMesh.debug_log("stop debug8")
EventMesh.publish(constants.EVENT.STOP_HEART)
- elif get_spo2_state != 0:
+ if get_spo2_state != 0:
EventMesh.publish("set_spo2_state",0)#2代表后台进入测试
if get_spo2_state == 1:
EventMesh.publish("stop_led_timer")#设置参数
EventMesh.publish(constants.EVENT.STOP_BLOOD_OXYGEN)
EventMesh.debug_log("stop debug13")
- elif get_bp_state != 0:
+ if get_bp_state != 0:
EventMesh.publish("set_bp_state",0)#2代表后台进入测试
if get_bp_state == 1:
EventMesh.publish("stop_led_timer")#设置参数
EventMesh.publish(constants.EVENT.STOP_HEART)
EventMesh.debug_log("stop bp debug1")
- elif get_bg_state != 0:
+ if get_bg_state != 0:
EventMesh.publish("set_bg_state",0)#2代表后台进入测试
if get_bg_state == 1:#手动开灯关闭灯
EventMesh.publish("stop_led_timer")#设置参数
EventMesh.publish("set_temp_state",0)#2代表后台进入测试
if get_temp_state == 1:
EventMesh.publish("stop_led_timer")#设置参数
- EventMesh.publish("get_start_temp_measure_time",0)#
+ EventMesh.publish("set_start_temp_measure_time",0)#
EventMesh.publish(constants.EVENT.STOP_TEMP)
EventMesh.debug_log("stop temp debug14")
if msg == 1:
if msg == 1:
if get_hr_state != 1:#不是手动测试直接打断
EventMesh.debug_log("set_manual_measure_mode",msg)
+ EventMesh.publish("set_spo2_state",0)
+ EventMesh.publish("set_bg_state",0)
+ EventMesh.publish("set_bp_state",0)
+
EventMesh.publish("set_hr_state",1)
+ EventMesh.publish("clear_manual_hr_flag")
EventMesh.publish("set_start_measure_time",1)#设置开始测量的时间戳时间
EventMesh.publish(constants.EVENT.STOP_BLOOD_OXYGEN) #停止测试血氧
EventMesh.publish("set_hr_blood_led",1)
elif msg == 3:
if get_temp_state != 1:
EventMesh.debug_log("set_manual_measure_mode",msg)
+ EventMesh.publish("clear_manual_temp_flag")
EventMesh.publish("set_temp_state",1)
EventMesh.publish("set_start_temp_measure_time",1)#设置开始测量的时间戳时间
EventMesh.publish("set_hr_blood_led",1)
EventMesh.publish("play_audio_file",[str_data,1])#获取播放音频文件('U:/static/audio.bin',1,1,str_data)
+ def play_battery_level_value(self, event, msg): #播放当前电量
+ flag = EventMesh.publish("get_call_state")
+ if flag == 0 and self.fall_flag == 0:#电话通话中 或者呼叫中挂断中断
+ EventMesh.publish("close_timer_all")#
+ battery = EventMesh.publish("screen_get_battery")
+ print("cur level",battery)
+ level = 100
+ if battery == None:
+ level = 100
+ else:
+ level = battery[1]
+ data = level
+ if data > 100:
+ data = 100
+ if data == 100:
+ str_data = 'mp3files={}.mp3+{}.mp3+{}.mp3'.format(audio_buf.index("R_CUR_BATTERY_LEVEL"),audio_buf.index("R_READ_TIME_1"),\
+ audio_buf.index("R_READ_STEP_2"))
+ EventMesh.publish("play_audio_file",[str_data,1])#获取播放音频文件('U:/static/audio.bin',1,1,str_data)
+ return
+
+ if data%10 == 0:
+ str_data = 'mp3files={}.mp3+{}.mp3+{}.mp3'.format(audio_buf.index("R_CUR_BATTERY_LEVEL"),audio_buf.index("R_READ_TIME_{}".format(data//10)),\
+ audio_buf.index("R_READ_STEP_3"))
+ EventMesh.publish("play_audio_file",[str_data,1])#获取播放音频文件('U:/static/audio.bin',1,1,str_data)
+ else:
+ str_data = 'mp3files={}.mp3+{}.mp3+{}.mp3+{}.mp3'.format(audio_buf.index("R_CUR_BATTERY_LEVEL"),audio_buf.index("R_READ_TIME_{}".format(data//10)),\
+ audio_buf.index("R_READ_STEP_3"),audio_buf.index("R_READ_TIME_{}".format(data%10)))
+ EventMesh.publish("play_audio_file",[str_data,1])#获取播放音频文件('U:/static/audio.bin',1,1,str_data)
+
+
+
+
def play_sugar_value(self, event, msg): #播放血糖数值
flag = EventMesh.publish("get_call_state")
if msg != None:
self.pwk_key26 = ExtInt(ExtInt.GPIO26, ExtInt.IRQ_RISING_FALLING, ExtInt.PULL_DISABLE, self.pwk_extint_cb)
self.pwk_key26.enable()
- self.sosKey = ExtInt(ExtInt.GPIO22,ExtInt.IRQ_RISING_FALLING, ExtInt.PULL_PU, self.sosKey_extint_cb)#S0S键
+ self.sosKey = ExtInt(ExtInt.GPIO6,ExtInt.IRQ_RISING_FALLING, ExtInt.PULL_PU, self.sosKey_extint_cb)#S0S键
self.sosKey.enable()
self.extint_19 = ExtInt(ExtInt.GPIO19,ExtInt.IRQ_RISING_FALLING, ExtInt.PULL_PU, self.key19_extint_cb)
# self.sosKey = ExtInt(ExtInt.GPIO22, ExtInt.IRQ_RISING_FALLING, ExtInt.PULL_PU, self.sosKey_extint_cb)
# self.sosKey.enable()
- self.wechatKey = ExtInt(ExtInt.GPIO6, ExtInt.IRQ_RISING_FALLING, ExtInt.PULL_PU, self.wechatKey_extint_cb)
+ self.wechatKey = ExtInt(ExtInt.GPIO22, ExtInt.IRQ_RISING_FALLING, ExtInt.PULL_PU, self.wechatKey_extint_cb)
self.wechatKey.enable()
# key19 = Pin(Pin.GPIO19, Pin.OUT, Pin.PULL_PU, 0)
fall_down = EventMesh.publish("get_fall_down_state")#跌倒报警标识
flag = EventMesh.publish("get_call_state")#在通话或者电话拨进 或者拨出不允许寻找设备
if fall_down != None:
- if fall_down != 0 or flag == 2:
+ if fall_down != 0:
return
+
self.KeyCall2_status = int(args[1])
+ # EventMesh.txt_log('self.KeyCall2_level :{}'.format(args,self.KeyCall2_status,GPIO17_status))
if self.KeyCall2_status == 0:
self.KeyCall2_status = 1
else:
self.KeyCall2_status = 0
pass
- EventMesh.debug_log('### key17_extint_cb {} self.KeyCall2_status :{}'.format(args,self.KeyCall2_status)) # args[0]:gpio号 args[1]:上升沿或下降沿
+ self.WeChatKey_status = self.wechatKey.read_level()
+ self.GPIO26_status = self.pwk_key26.read_level()
+ self.KeyCall1_status = self.extint_19.read_level()
+ self.sosKey_status = self.sosKey.read_level()
+ # EventMesh.debug_log('key17_extint_cb ',args,self.KeyCall2_status,self.WeChatKey_status,self.sosKey_status,self.KeyCall1_status,self.GPIO26_status) # args[0]:gpio号 args[1]:上升沿或下降沿
+
+ # EventMesh.debug_log('key17_extint_cb',args,self.KeyCall2_status,self.WeChatKey_status,self.GPIO26_status,self.KeyCall1_status,self.sosKey_status) # args[0]:gpio号 args[1]:上升沿或下降沿
if self.WeChatKey_status != 0 and self.GPIO26_status != 0 and self.KeyCall1_status != 0 and self.sosKey_status != 0:
if self.KeyCall2_status == 0:#按下
if self.Keycall2_press == 0 :
self.Keycall2_timer.stop()
self.Keycall1_timer.stop()
- self.wechatKey_press_count = 0
- self.wechatKey_press = 0
-
- self.pwKey_press_count = 0
+ self.pwkey_count = 0
self.pwkey_press = 0
-
- self.sosKey_long_press = 0
+ self.led_state = 0
+ self.pwKey_press_count=0 #电源键
+
self.sosKey_count = 0
+ self.sosKey_press = 0
+ self.sosKey_press_count=0#sos键
+
+ self.wechatKey_count = 0
+ self.wechatKey_press = 0
+ self.wechatKey_press_count=0#微聊键
self.Keycall1_count = 0
self.Keycall1_press = 0
- self.Keycall1_press_count = 0
+ self.Keycall1_press_count = 0#call 1键
self.Keycall2_count = 0
self.Keycall2_press = 1
def call2Key_press_cb(self, data):
'''KEY2:联动屏幕右下角或返回键长按关机'''
if self.Keycall2_press == 1 :
+ self.Keycall2_count += 1
+ if self.Keycall2_count >= 10*3: #长按3s
+ self.Keycall2_count = 0
+ self.Keycall2_press = 0
+ self.Keycall2_press_count = 0
+ self.Keycall2_timer.stop()
+ flag = EventMesh.publish("get_call_state")#获取通话状态
+ fall_down = EventMesh.publish("get_fall_down_state")#跌倒报警标识
+ if fall_down != None:
+ if fall_down != 0 or flag == 2:
+ return
+ EventMesh.publish("stop_led_timer")#设置参数
+ EventMesh.publish("call_phonebook_one_call")
+
if self.KeyCall2_status == 1:#松开
- self.Keycall2_count += 1
if self.Keycall2_count >= 1: #防抖100ms
self.Keycall2_timer.stop()
self.Keycall2_count = 0
def call2Key_timeout_cb(self, data):#
flag = EventMesh.publish("get_call_state")#在通话或者电话拨进 或者拨出不允许寻找设备
fall_down = EventMesh.publish("get_fall_down_state")#跌倒报警标识
- if self.Keycall2_press_count >= 1:#短按十次解绑app
- fall_down = EventMesh.publish("get_fall_down_state")#跌倒报警标识
+ # print("call2Key_timeout_cb",self.Keycall2_press_count,flag)
+ if self.Keycall2_press_count > 1:#
if fall_down != None:
if fall_down != 0 or flag != 0:#在打电话或者跌倒报警提醒中不允许按键触发
self.Keycall2_press_count = 0
return
- if self.Keycall2_press_count == 1:#拨打通讯录号码二
+ if self.Keycall2_press_count == 3:#心率血压测试
+ self.Keycall2_press_count = 0
+ call_state = EventMesh.publish("get_call_state")
+ battery = EventMesh.publish("screen_get_battery")
+ if call_state == None:
+ call_state = 0
+ if call_state == 0:
+ if battery != None:
+ if battery[0] != "1":#在充电得时候
+ EventMesh.publish("stop_led_timer")#设置参数
+ EventMesh.publish("set_manual_measure_mode",1)#
+ elif self.Keycall2_press_count == 1:#
self.Keycall2_press_count = 0
EventMesh.publish("stop_led_timer")#设置参数
- EventMesh.publish("call_phonebook_two_call")
+ call_state = EventMesh.publish("get_call_state")
+ if call_state == 2:#电话拨进需要接听
+ EventMesh.publish("answer_call_event")#接听电话
+ return
+ EventMesh.publish("play_cur_step_event")##播放当前步数
+
+
self.Keycall2_press_count = 0
fall_down = EventMesh.publish("get_fall_down_state")#跌倒报警标识
flag = EventMesh.publish("get_call_state")#在通话或者电话拨进 或者拨出不允许寻找设备
if fall_down != None:
- if fall_down != 0 or flag == 2:
+ if fall_down != 0:
return
- # self.KeyCall1_status = self.extint_19.read_level()
- # self.KeyCall1_status = ~args[1]
self.KeyCall1_status = int(args[1])
if self.KeyCall1_status == 0:
self.KeyCall1_status = 1
else:
self.KeyCall1_status = 0
pass
- EventMesh.debug_log('### key19_extint_cb {} self.KeyCall1_status :{}'.format(args,self.KeyCall1_status)) # args[0]:gpio号 args[1]:上升沿或下降沿
+ self.WeChatKey_status = self.wechatKey.read_level()
+ self.GPIO26_status = self.pwk_key26.read_level()
+ self.KeyCall2_status = self.extint_17.read_level()
+ self.sosKey_status = self.sosKey.read_level()
+ # EventMesh.debug_log('key19_extint_cb ',args,self.KeyCall1_status,self.GPIO26_status,self.WeChatKey_status,self.sosKey_status,self.KeyCall2_status,self.GPIO26_status) # args[0]:gpio号 args[1]:上升沿或下降沿
+ # EventMesh.debug_log('self.KeyCall1_status :{}',args,self.KeyCall1_status) # args[0]:gpio号 args[1]:上升沿或下降沿
if self.WeChatKey_status != 0 and self.GPIO26_status != 0 and self.KeyCall2_status != 0 and self.sosKey_status != 0:
if self.KeyCall1_status == 0:#按下
if self.Keycall1_press == 0 :
self.Keycall2_timer.stop()
self.Keycall1_timer.stop()
- self.wechatKey_press_count = 0
- self.wechatKey_press = 0
-
- self.pwKey_press_count = 0
+ self.pwkey_count = 0
self.pwkey_press = 0
-
- self.sosKey_long_press = 0
+ self.led_state = 0
+ self.pwKey_press_count=0
+
self.sosKey_count = 0
+ self.sosKey_press = 0
+ self.sosKey_press_count=0
+
+ self.wechatKey_count = 0
+ self.wechatKey_press = 0
+ self.wechatKey_press_count=0
self.Keycall2_count = 0
self.Keycall2_press = 0
def call1Key_press_cb(self, data):
'''KEY2:联动屏幕右下角或返回键长按关机'''
if self.Keycall1_press == 1 :
+ self.Keycall1_count += 1
+ if self.Keycall1_count >= 10*3: #长按3s
+ self.Keycall1_count = 0
+ self.Keycall1_press = 0
+ self.Keycall1_press_count = 0
+ self.Keycall1_timer.stop()
+ flag = EventMesh.publish("get_call_state")#获取通话状态
+ fall_down = EventMesh.publish("get_fall_down_state")#跌倒报警标识
+ if fall_down != None:
+ if fall_down != 0 or flag == 2:
+ return
+ EventMesh.publish("stop_led_timer")#设置参数
+ EventMesh.publish("call_phonebook_two_call")
+
if self.KeyCall1_status == 1:#松开
- self.Keycall1_count += 1
if self.Keycall1_count >= 1: #防抖100ms
self.Keycall1_timer.stop()
self.Keycall1_count = 0
EventMesh.publish("publish_message_event_btnInfo",{"func":self.call1Key_timeout_cb,"data":0})
def call1Key_timeout_cb(self, data):#
- flag = EventMesh.publish("get_call_state")#在通话或者电话拨进 或者拨出不允许寻找设备
- fall_down = EventMesh.publish("get_fall_down_state")#跌倒报警标识
- if self.Keycall1_press_count >= 1:#短按十次解绑app
+ flag = EventMesh.publish("get_call_state")#获取通话状态
+ fall_down = EventMesh.publish("get_fall_down_state")#获取跌倒报警标识
+ # print("call1Key_timeout_cb",self.Keycall1_press_count,flag)
+ if self.Keycall1_press_count > 1:#短按十次解绑app
if fall_down != None:
if fall_down != 0 or flag != 0:#在打电话或者跌倒报警提醒中不允许按键触发
self.Keycall1_press_count = 0
return
- if self.Keycall1_press_count == 1:#拨打通讯录号码一
+
+ if self.Keycall1_press_count == 3:#测试体温
+ self.Keycall1_press_count = 0
+ call_state = EventMesh.publish("get_call_state")
+ battery = EventMesh.publish("screen_get_battery")
+ if call_state == None:
+ call_state = 0
+ if call_state == 0:
+ if battery != None:
+ if battery[0] != "1":#在充电得时候
+ EventMesh.publish("stop_led_timer")#设置参数
+ EventMesh.publish("set_manual_measure_mode",3)#测量体温
+ elif self.Keycall1_press_count == 1:#拨打通讯录号码二
self.Keycall1_press_count = 0
EventMesh.publish("stop_led_timer")#设置参数
- EventMesh.publish("call_phonebook_one_call")
+ call_state = EventMesh.publish("get_call_state")
+ if call_state == 2:#电话拨进需要接听
+ EventMesh.publish("answer_call_event")#接听电话
+ return
+ EventMesh.publish("play_battery_level_value")#播放当前电量
+
self.Keycall1_press_count = 0
if open_power != None:
if open_power == 0:
return
- flag = EventMesh.publish("get_call_state")#在通话或者电话拨进 或者拨出不允许寻找设备
- fall_down = EventMesh.publish("get_fall_down_state")#跌倒报警标识
+ flag = EventMesh.publish("get_call_state")#获取通话状态
+ fall_down = EventMesh.publish("get_fall_down_state")#è\8e·å\8f\96è·\8cå\80\92æ\8a¥è¦æ \87è¯\86
if fall_down != None:
if fall_down != 0 or flag == 2:
return
else:
self.GPIO26_status = 0
pass
+ self.WeChatKey_status = self.wechatKey.read_level()
+ self.KeyCall2_status = self.extint_17.read_level()
+ self.KeyCall1_status = self.extint_19.read_level()
+ self.sosKey_status = self.sosKey.read_level()
+ # EventMesh.debug_log('pwk_extint_cb ',args,self.GPIO26_status,self.WeChatKey_status,self.sosKey_status,self.KeyCall1_status,self.KeyCall2_status) # args[0]:gpio号 args[1]:上升沿或下降沿
# self.GPIO26_status = ~args[1]
- EventMesh.debug_log('### GPIO26_status {} self.GPIO26_status :{}'.format(args,self.GPIO26_status)) # args[0]:gpio号 args[1]:上升沿或下降沿
+ # EventMesh.debug_log('### GPIO26_status {} self.GPIO26_status :{}'.format(args,self.GPIO26_status)) # args[0]:gpio号 args[1]:上升沿或下降沿
if self.WeChatKey_status != 0 and self.KeyCall1_status != 0 and self.sosKey_status != 0 and self.KeyCall2_status != 0:
# if self.sosKey_status != 0 and self.WeChatKey_status != 0:
if self.GPIO26_status == 0:#按下
self.Keycall2_timer.stop()
self.Keycall1_timer.stop()
- self.wechatKey_press_count = 0
- self.sosKey_press_count = 0
+ self.sosKey_count = 0
self.sosKey_press = 0
+ self.sosKey_press_count=0
+
+ self.wechatKey_count = 0
self.wechatKey_press = 0
+ self.wechatKey_press_count=0
+
self.pwkey_press = 1
self.pwkey_count = 0
else:
self.sosKey_status = 0
pass
- # self.sosKey_status = self.sosKey.read_level()
- EventMesh.debug_log('### sosKey_extint_cb {} self.sosKey_status:{}'.format(args,self.sosKey_status)) # args[0]:gpio号 args[1]:上升沿或下降沿
- # if self.WeChatKey_status != 0 and self.GPIO26_status != 0:
+
+ self.WeChatKey_status = self.wechatKey.read_level()
+ self.GPIO26_status = self.pwk_key26.read_level()
+ self.KeyCall1_status = self.extint_19.read_level()
+ self.KeyCall2_status = self.extint_17.read_level()
+
+ # EventMesh.debug_log('sosKey_extint_cb ',args,self.sosKey_status,self.WeChatKey_status,self.KeyCall1_status,self.KeyCall2_status,self.GPIO26_status) # args[0]:gpio号 args[1]:上升沿或下降沿
if self.WeChatKey_status != 0 and self.GPIO26_status != 0 and self.KeyCall1_status != 0 and self.KeyCall2_status != 0:
if self.sosKey_status == 0:#按下
- EventMesh.publish("close_falldown_alarm_event")#sos短按事件
+ EventMesh.publish("close_falldown_alarm_event")#关闭跌倒报警提醒事件
if self.sosKey_press == 0 :
- self.led_state = 0
self.wechatKey_timer.stop()
self.pwkey_timer.stop()
self.sosKey_timer.stop()
self.Keycall2_timer.stop()
self.Keycall1_timer.stop()
- self.wechatKey_press_count = 0
- self.pwKey_press_count = 0
- self.sosKey_press = 1
+
+
+ self.pwkey_count = 0
self.pwkey_press = 0
+ self.led_state = 0
+ self.pwKey_press_count=0 #电源键
+
+
+ self.wechatKey_count = 0
self.wechatKey_press = 0
+ self.wechatKey_press_count=0#微聊键
+
+
+ self.sosKey_press = 1
self.sosKey_long_press = 0
self.sosKey_count = 0
self.sosKey_long_press = 1
self.sosKey_press = 0
self.sosKey_timer.stop()
- flag = EventMesh.publish("get_call_state")#在通话或者电话拨进 或者拨出不允许寻找设备
+ flag = EventMesh.publish("get_call_state")#获取通话状态
fall_down = EventMesh.publish("get_fall_down_state")#跌倒报警标识
if fall_down != None:
if fall_down != 0 or flag == 2:
EventMesh.publish("publish_message_event_btnInfo",{"func":self.sosKey_timeout_cb,"data":0})
def sosKey_timeout_cb(self, data):#
# EventMesh.debug_log("sosKey_press_count!!!!!!!!!!!!!! ",self.sosKey_press_count)
- flag = EventMesh.publish("get_call_state")#在通话或者电话拨进 或者拨出不允许寻找设备
+ flag = EventMesh.publish("get_call_state")#获取通话状态
fall_down = EventMesh.publish("get_fall_down_state")#跌倒报警标识
if self.sosKey_press_count > 1:#短按十次解绑app
if fall_down != None:
else:
self.WeChatKey_status = 0
pass
- EventMesh.debug_log('### wechatKey_extint_cb {} self.WeChatKey_status:{}'.format(args,self.WeChatKey_status)) # args[0]:gpio号 args[1]:上升沿或下降沿
+
+ self.sosKey_status = self.sosKey.read_level()
+ self.GPIO26_status = self.pwk_key26.read_level()
+ self.KeyCall1_status = self.extint_19.read_level()
+ self.KeyCall2_status = self.extint_17.read_level()
+ # EventMesh.debug_log('wechatKey_extint_cb ',args,self.WeChatKey_status,self.sosKey_status,self.KeyCall1_status,self.KeyCall2_status,self.GPIO26_status) # args[0]:gpio号 args[1]:上升沿或下降沿
# if self.sosKey_status != 0 and self.GPIO26_status != 0:
if self.sosKey_status != 0 and self.GPIO26_status != 0 and self.KeyCall1_status != 0 and self.KeyCall2_status != 0:
if self.WeChatKey_status == 0:#按下
self.Keycall1_timer.stop()
self.sosKey_press_count = 0
- self.pwKey_press_count = 0
self.sosKey_press = 0
+ self.sosKey_count = 0
+
self.pwkey_press = 0
+ self.pwkey_count = 0
+ self.pwKey_press_count=0
+
self.wechatKey_press = 1
self.led_state = 0
self.wechatKey_count = 0
EventMesh.subscribe("clear_sleep_alarm", self.clear_sleep_alarm)
EventMesh.subscribe("clear_normal_alarm", self.clear_normal_alarm)
+ EventMesh.subscribe("clear_manual_hr_flag", self.clear_manual_hr_flag)
+ EventMesh.subscribe("clear_manual_temp_flag", self.clear_manual_temp_flag)
+
+
EventMesh.subscribe("clear_usb_flag", self.clear_usb_flag)
EventMesh.debug_log("post_processor_after_instantiation:2")
EventMesh.debug_log("post_processor_after_instantiation:3")
+ def clear_manual_hr_flag(self,event,msg):
+ self.auto_hr_count = 0
+
+ def clear_manual_temp_flag(self,event,msg):
+ self.auto_temp_count = 0
+
def publish_message_event_DeviceInfo(self,event,msg):
self.DeviceInfo_queue.put(msg)
self.temp_warning += 1
EventMesh.debug_log("temp_warning:{} get_temp_time{}".format(self.temp_warning,get_temp_time))
- if self.temp_warning*get_temp_time < 3:#高温没连续超过3次，和谐成37.5度以下
+ if self.temp_warning < 5:#高温没连续超过3次，和谐成37.5度以下
temp = 37+(urandom.randint(1, 4)/10)
+ else:
+ self.temp_warning = 0
else:
if self.temp_warning>=1:
self.temp_warning -= 1
if get_temp_state > 1 and (WEAR != 1 or call_state != 0):
EventMesh.publish(constants.EVENT.STOP_TEMP)
EventMesh.publish("set_temp_state",0)
- if get_temp_state > 2:
- EventMesh.publish("stop_led_timer")#设置参数
+ EventMesh.txt_log("auto stop_temp:22")
+
if (self.get_hr_state > 1 or self.get_spo2_state > 1 or get_bp_state > 1 or get_bg_state > 1) and (WEAR != 1 or call_state != 0):
- print("wear faile")
+ # print("wear faile")
if self.get_hr_state > 1 :
+ EventMesh.txt_log("auto stop_hr:22")
EventMesh.publish("set_hr_state",0)#2代表后台进入测试，定时测心率 1ui界面测试洗心率
- if self.get_hr_state > 2:
- EventMesh.publish("stop_led_timer")#设置参数
EventMesh.publish(constants.EVENT.STOP_HEART)
+ if WEAR == 1:
+ heart_value = EventMesh.publish(constants.EVENT.GET_HEART)
+ if heart_value > 50 and heart_value != None:
+ EventMesh.publish(constants.PROTOCOL.HEART_SEND,heart_value)#上传心率数据
- elif self.get_spo2_state > 1:
+ if self.get_spo2_state > 1:
+ EventMesh.txt_log("auto stop_spo2:22")
EventMesh.publish("set_spo2_state",0)#2代表后台进入测试
- if self.get_spo2_state > 2:
- EventMesh.publish("stop_led_timer")#设置参数
+
EventMesh.publish(constants.EVENT.STOP_BLOOD_OXYGEN)
+ spo2_value = EventMesh.publish(constants.EVENT.GET_BLOOD_OXYGEN)
+ if WEAR == 1:
+ if spo2_value > 85 and spo2_value != None:
+ EventMesh.publish(constants.PROTOCOL.OXYGEN_SEND,spo2_value)
- elif get_bp_state > 1:
+ if get_bp_state > 1:
+
+ EventMesh.txt_log("auto stop_bp:22")
EventMesh.publish("set_bp_state",0)#2代表后台进入测试
- if get_bp_state > 2:
- EventMesh.publish("stop_led_timer")#设置参数
EventMesh.publish(constants.EVENT.STOP_HEART)
+ if WEAR == 1:
+ blood_data = get_autoblood_value()
+ if blood_data == None:
+ blood_data[0] = 0
+ blood_data[1] = 0
+
+ max_value = blood_data[0]
+ min_value = blood_data[1]
+ if max_value != 0 and min_value != 0:
+ EventMesh.publish(constants.PROTOCOL.BLOOD_SEND,[max_value,min_value])
+
+ if get_bg_state > 1:
+ EventMesh.txt_log("auto stop_bg:22")
- elif get_bg_state > 1:
EventMesh.publish("set_bg_state",0)#2代表后台进入测试
- if get_bg_state > 2:
- EventMesh.publish("stop_led_timer")#设置参数
EventMesh.publish(constants.EVENT.STOP_HEART)
+ if WEAR == 1:
+ bg_data = get_blood_sugar_value()
+ if bg_data == None:
+ bg_data = 0
+ if bg_data != 0:
+ # EventMesh.publish("play_sugar_value", bg_data)#播放血糖数值
+ EventMesh.publish(constants.PROTOCOL.BLOODGLUSOCE_SEND,bg_data)
if self.pull_time == 0:
self.pull_time = time_tmp
EventMesh.publish("set_hr_state",3)#2代表后台进入测试
# EventMesh.publish("set_hr_blood_led",1)
EventMesh.publish(constants.EVENT.START_HEART)
- print("hr start 3")
+ EventMesh.txt_log("auto start_hr:333")
elif self.old_hr_time > 6:
self.old_hr_time = 0
EventMesh.publish("set_hr_state",0)#2代表后台进入测试
- EventMesh.debug_log("stop hr 3 debug3")
+ EventMesh.txt_log("auto stop_hr:333")
EventMesh.publish(constants.EVENT.STOP_HEART)
heart_value = EventMesh.publish(constants.EVENT.GET_HEART)
EventMesh.debug_log("heart_value:{}".format(heart_value))
if heart_value > 50 and heart_value != None:
- # EventMesh.publish("play_hr_value",heart_value)
EventMesh.publish(constants.PROTOCOL.HEART_SEND,heart_value)#上传心率数据
- else:
- # EventMesh.publish("play_hr_value",0)
- pass
- # EventMesh.publish("play_hr_value",0)
- #获取心率数据上传数据app
EventMesh.debug_log("STOP_HEART:3")
else:
self.old_hr_time = 0
EventMesh.publish("set_spo2_state",3)#2代表后台进入测试
# EventMesh.publish("set_hr_blood_led",1)
EventMesh.publish(constants.EVENT.START_BLOOD_OXYGEN)#K开血氧
- print("spo2 start 3")
+ EventMesh.txt_log("auto start_spo2:333")
elif self.old_spo2_time > 6:
self.old_spo2_time = 0
+ EventMesh.txt_log("auto stop_spo2:333")
EventMesh.publish("set_spo2_state",0)#2代表后台进入测试
EventMesh.publish(constants.EVENT.STOP_BLOOD_OXYGEN)
spo2_value = EventMesh.publish(constants.EVENT.GET_BLOOD_OXYGEN)
if spo2_value > 85 and spo2_value != None:
- # EventMesh.publish("play_spo2_value",spo2_value)
- # EventMesh.publish("set_old_spo2_data",spo2_value)
EventMesh.publish(constants.PROTOCOL.OXYGEN_SEND,spo2_value)
- else:
- # EventMesh.publish("play_spo2_value",0)
- print("spo2 stop 3")
+
else:
self.old_spo2_time = 0
else:
EventMesh.publish("set_bp_state",3)#2代表后台进入测试
# EventMesh.publish("set_hr_blood_led",1)
EventMesh.publish(constants.EVENT.START_HEART)
- print("bp start ")
+ EventMesh.txt_log("auto start_bp:333")
elif self.old_bp_time > 6:
self.old_bp_time = 0
max_value = blood_data[0]
min_value = blood_data[1]
if max_value != 0 and min_value != 0:
- EventMesh.publish("set_old_blood_data",[max_value,min_value])
-
EventMesh.publish(constants.PROTOCOL.BLOOD_SEND,[max_value,min_value])
EventMesh.publish(constants.EVENT.STOP_HEART)
- print("bp stop ")
+ EventMesh.txt_log("auto stop_bp:333")
else:
self.old_bp_time = 0
else:
EventMesh.publish("set_bg_state",3)#2代表后台进入测试
# EventMesh.publish("set_hr_blood_led",1)
EventMesh.publish(constants.EVENT.START_HEART)
- print("bg start ")
+ EventMesh.txt_log("auto start_bg:333")
elif self.old_bg_time > 6:
self.old_bg_time = 0
EventMesh.publish("set_bg_state",0)#2代表后台进入测试
if bg_data == None:
bg_data = 0
if bg_data != 0:
- # EventMesh.publish("play_sugar_value", bg_data)#播放血糖数值
EventMesh.publish(constants.PROTOCOL.BLOODGLUSOCE_SEND,bg_data)
- else:
- # EventMesh.publish("play_sugar_value", 0)#播放血糖数值
- pass
-
- print("bg stop ")
+ EventMesh.txt_log("auto stop_bp:333")
else:
self.old_bg_time = 0
else:
if get_temp_state == 3:#单次测量
self.temp_one_state+=1
if self.temp_one_state == 1:
+ EventMesh.txt_log("auto start_temp:333")
EventMesh.debug_log("AUTO one temp:2")
EventMesh.publish("set_temp_state",3)
# EventMesh.publish("set_hr_blood_led",1)
if temp != None:
if temp != 0:
- # EventMesh.publish("set_history_temp_value",temp)
- # EventMesh.publish("play_temp_value",temp)#播放体温数值
EventMesh.publish(constants.PROTOCOL.TEMP_SEND,[tmp_f_tmp,tmp_d_tmp])
- else:
- # EventMesh.publish("set_history_temp_value",0)
- pass
- # EventMesh.publish("play_temp_value",0)#播放体温数值
- # EventMesh.publish("stop_led_timer")#设置参数
EventMesh.publish(constants.EVENT.STOP_TEMP)
- EventMesh.debug_log("AUTO once temp:{} tmp_f:{} tmp_f_tmp:{} tmp_d:{} tmp_d_tmp:{}".format(temp,tmp_f,tmp_f_tmp,tmp_d,tmp_d_tmp))
-
+ EventMesh.txt_log("auto start_temp:333")
if get_temp_time != None:#定时测量体温
if get_temp_time > 0:
if get_temp_state != None:
+ get_temp_state = EventMesh.publish("get_temp_state")
if get_temp_state == 0 or get_temp_state == 2:
if (time_tmp-self.temp_time) >= get_temp_time:#大于一个周期的时间，重新赋值
self.temp_state = 0
EventMesh.publish("set_temp_state",2)
# EventMesh.publish("set_hr_blood_led",1)
EventMesh.debug_log("AUTO temp:")
+ EventMesh.txt_log("auto START_temp:1")
EventMesh.publish(constants.EVENT.START_TEMP)
elif (time_tmp-self.temp_time) >= 30 and self.temp_state == 1:
self.temp_state = 0
+ EventMesh.txt_log("auto stop_temp:1")
+ EventMesh.publish("set_temp_state",0)
temp = EventMesh.publish(constants.EVENT.GET_TEMP)
temp = self.optimize_temp(temp)
- EventMesh.publish("set_temp_state",0)
+
tmp_f_tmp = 0
tmp_d_tmp = 0
if str(temp).find(".") != -1:
if temp != None:
if temp != 0:
- EventMesh.publish("set_history_temp_value",temp)
- # EventMesh.publish("play_temp_value",temp)#播放体温数值
EventMesh.publish(constants.PROTOCOL.TEMP_SEND,[tmp_f_tmp,tmp_d_tmp])
- else:
- EventMesh.publish("set_history_temp_value",0)
- # EventMesh.publish("play_temp_value",0)#播放体温数值
EventMesh.publish(constants.EVENT.STOP_TEMP)
- # EventMesh.publish("stop_led_timer")#设置参数
- EventMesh.debug_log("AUTO temp:{} tmp_f:{} tmp_f_tmp:{} tmp_d:{} tmp_d_tmp:{}".format(temp,tmp_f,tmp_f_tmp,tmp_d,tmp_d_tmp))
-
+
else:
self.temp_state = 0
self.old_temp_time = 0
if temp_state == 2:
EventMesh.publish("set_temp_state",0)#2代表后台进入测试
# EventMesh.publish("stop_led_timer")#设置参数
- EventMesh.debug_log("temp stop debug3")
+ EventMesh.txt_log("auto wear stop_temp:2 ")
EventMesh.publish(constants.EVENT.STOP_TEMP)
self.temp_state = 0
self.temp_time = 0
hr_time = {}
- hr_time = EventMesh.publish("get_time_hr_spo2")#获取时间是否大于0
+ hr_time = EventMesh.publish("get_time_hr")#获取时间是否大于0
if hr_time[0] != None:
self.mearsure_btn = int(hr_time[0])
get_spo2_state = EventMesh.publish("get_spo2_state")#血氧
get_bp_state = EventMesh.publish("get_bp_state")#血压
get_bg_state = EventMesh.publish("get_bg_state")#血糖
- print("state hr",get_hr_state,get_spo2_state,get_bp_state,get_bg_state)
+ # print("state hr",get_hr_state,get_spo2_state,get_bp_state,get_bg_state)
if (get_bg_state == 0 and get_spo2_state == 0 and get_bp_state == 0) and (get_hr_state == 2 or get_hr_state == 0):#心率血压血氧不在测试就测试血糖自动测量
if (time_tmp-self.SENSOR_time) >= self.mearsure_timer:#大于一个周期的时间，保存的时间戳时间 1678 0 1678 30 1678
self.SENSOR_time = time_tmp
self.HR_Onestate = 0
- print("time_tmp hr",time_tmp,self.SENSOR_time,time_tmp-self.SENSOR_time,self.mearsure_timer,self.HR_Onestate)
+ # print("time_tmp hr",time_tmp,self.SENSOR_time,time_tmp-self.SENSOR_time,self.mearsure_timer,self.HR_Onestate)
if (time_tmp - self.SENSOR_time) == 0 and self.HR_Onestate == 0:
- EventMesh.debug_log("START_hr:1")
+ self.HR_Onestate = 1
+ EventMesh.txt_log("auto START_hr:1")
EventMesh.publish("set_hr_state",2)#2代表后台进入测试
# EventMesh.publish("set_hr_blood_led",1)
EventMesh.publish(constants.EVENT.START_HEART)
- self.HR_Onestate = 1
+
elif (time_tmp - self.SENSOR_time) >= 60 and self.HR_Onestate == 1:
self.HR_Onestate = 0
EventMesh.publish("set_hr_state",0)#2代表后台进入测试
EventMesh.debug_log("stop debug3")
+ EventMesh.txt_log("auto stop_hr:1")
EventMesh.publish(constants.EVENT.STOP_HEART)
heart_value = EventMesh.publish(constants.EVENT.GET_HEART)
EventMesh.debug_log("heart_value:{}".format(heart_value))
# heart_value = 60+urandom.randint(0,10)
if heart_value > 50 and heart_value != None:
- # EventMesh.publish("play_hr_value",heart_value)
- EventMesh.publish("set_history_hr_value",heart_value)
EventMesh.publish(constants.PROTOCOL.HEART_SEND,heart_value)#上传心率数据
- else:
- # EventMesh.publish("stop_led_timer")#设置参数
- pass
- # EventMesh.publish("play_hr_value",0)
#获取心率数据上传数据app
EventMesh.debug_log("STOP_HEART:")
EventMesh.debug_log("33stop debug3")
# EventMesh.publish("stop_led_timer")#设置参数
EventMesh.publish(constants.EVENT.STOP_HEART)
+ EventMesh.txt_log("auto wear stop_hr:2 ")
+
get_spo2time = EventMesh.publish("get_spo2_time")#血压自动测试
# print("get_spo2time",get_spo2time)
if get_spo2time != None:#血压时间不为0
self.spo2auto_state = 0
# print("time_tmp spo2",time_tmp,self.spo2_timeSecond,time_tmp-self.spo2_timeSecond,self.bg_timer,self.bpauto_state)
if (time_tmp - self.spo2_timeSecond) == 0 and self.spo2auto_state == 0:
+ self.spo2auto_state = 1
EventMesh.debug_log("START_spo2:auto")
+ EventMesh.txt_log("auto START_spo2:1")
EventMesh.publish("set_spo2_state",2)#2代表后台进入测试
EventMesh.publish(constants.EVENT.START_BLOOD_OXYGEN)#K开血氧
- self.spo2auto_state = 1
+
elif (time_tmp - self.spo2_timeSecond) >= 60 and self.spo2auto_state == 1:
EventMesh.publish("set_spo2_state",0)#2代表后台进入测试
+ self.spo2auto_state = 0
EventMesh.publish(constants.EVENT.STOP_BLOOD_OXYGEN)
spo2_value = EventMesh.publish(constants.EVENT.GET_BLOOD_OXYGEN)
if spo2_value > 85 and spo2_value != None:
- EventMesh.publish("set_old_spo2_data",spo2_value)
EventMesh.publish(constants.PROTOCOL.OXYGEN_SEND,spo2_value)
- print("spo2 auto stop ")
- self.spo2auto_state = 0
+ EventMesh.txt_log("auto stop_spo2:1")
+
else:
self.spo2auto_state = 0
else:
if spo2_state == 2:
EventMesh.publish("set_spo2_state",0)#2代表后台进入测试
EventMesh.debug_log("spo2 stop debug3")
- # EventMesh.publish("stop_led_timer")#设置参数
+ EventMesh.txt_log("auto wear stop_spo2:2 ")
EventMesh.publish(constants.EVENT.STOP_BLOOD_OXYGEN)
self.bpauto_state = 0
# print("time_tmp bp",time_tmp,self.bp_timeSecond,time_tmp-self.bp_timeSecond,self.bg_timer,self.bpauto_state)
if (time_tmp - self.bp_timeSecond) == 0 and self.bpauto_state == 0:
+ self.bpauto_state = 1
EventMesh.debug_log("START_bp:auto")
+ EventMesh.txt_log("auto START_bp:1")
EventMesh.publish("set_bp_state",2)#2代表后台进入测试
# EventMesh.publish("set_hr_blood_led",1)
EventMesh.publish(constants.EVENT.START_HEART)
- self.bpauto_state = 1
+
elif (time_tmp - self.bp_timeSecond) >= 60 and self.bpauto_state == 1:
+ self.bpauto_state = 0
EventMesh.publish("set_bp_state",0)#2代表后台进入测试
blood_data = get_autoblood_value()
if blood_data == None:
max_value = blood_data[0]
min_value = blood_data[1]
if max_value != 0 and min_value != 0:
- EventMesh.publish("set_old_blood_data",[max_value,min_value])
-
EventMesh.publish(constants.PROTOCOL.BLOOD_SEND,[max_value,min_value])
EventMesh.publish(constants.EVENT.STOP_HEART)
- print("bp auto stop ")
- self.bpauto_state = 0
+ EventMesh.txt_log("auto stop_bp:1")
+
else:
self.bpauto_state = 0
else:
if bp_state == 2:
EventMesh.publish("set_bp_state",0)#2代表后台进入测试
EventMesh.debug_log("bp stop debug3")
+ EventMesh.txt_log("auto wear stop_bp:2 ")
# EventMesh.publish("stop_led_timer")#设置参数
EventMesh.publish(constants.EVENT.STOP_HEART)
if (get_hr_state == 0 and get_spo2_state == 0 and get_bp_state == 0) and (get_bg_state == 2 or get_bg_state == 0):#心率血压血氧不在测试就测试血糖自动测量
if (time_tmp-self.bg_times) >= bg_timer:#大于一个周期的时间，保存的时间戳时间 1678 0 1678 30 1678
- self.bg_times = time_tmp
+ self.bg_times = time_tmp #1780
self.BG_state = 0
# print("time_tmp bg",time_tmp,self.bg_times,time_tmp-self.bg_times,bg_timer,self.BG_state)
if (time_tmp - self.bg_times) == 0 and self.BG_state == 0:
EventMesh.debug_log("START_bg:1")
+ EventMesh.txt_log("auto START_bg:1")
EventMesh.publish("set_bg_state",2)#2代表后台进入测试
# EventMesh.publish("set_hr_blood_led",1)
EventMesh.publish(constants.EVENT.START_HEART)
self.BG_state = 1
elif (time_tmp - self.bg_times) >= 60 and self.BG_state == 1:
+ self.BG_state = 0
EventMesh.publish("set_bg_state",0)#2代表后台进入测试
# EventMesh.publish("stop_led_timer")#设置参数
+ EventMesh.txt_log("auto stop_bg:1")
EventMesh.debug_log("stop bgdebug3")
EventMesh.publish(constants.EVENT.STOP_HEART)
bgdata = get_blood_sugar_value()
if bgdata == None:
bgdata = 0
if bgdata != 0:
- print("bgdata",bgdata)
+ EventMesh.debug_log("bgdata",bgdata)
EventMesh.publish(constants.PROTOCOL.BLOODGLUSOCE_SEND,bgdata)#上传心率数据
- self.BG_state = 0
+
else:
self.BG_state = 0
EventMesh.publish("set_bg_state",0)#2代表后台进入测试
# EventMesh.publish("stop_led_timer")#设置参数
EventMesh.debug_log("bg stop bgdebug3")
+ EventMesh.txt_log("auto wear stop_bg:2 ")
EventMesh.publish(constants.EVENT.STOP_HEART)
self.bg_times = 0
self.BG_state = 0
else:
self.old_temp_time = 0
self.old_time = 0
- self.SENSOR_time = time_tmp
+ # self.SENSOR_time = time_tmp
self.HR_Onestate = 0
self.HR_OneTime = 0
self.HR_state = 0
self.old_spo2_time = 0
self.set_hsenor_crt = 0
self.old_bg_time = 0
- self.bg_times = time_tmp
+ # self.bg_times = time_tmp
self.BG_state = 0
- self.temp_time = time_tmp
+ # self.temp_time = time_tmp
- self.bp_timeSecond = time_tmp
+ # self.bp_timeSecond = time_tmp
self.bpauto_state = 0
- self.spo2_timeSecond = time_tmp
+ # self.spo2_timeSecond = time_tmp
self.spo2auto_state = 0
self.temp_state = 0
self.temp_one_state = 0
- self.old_temp_time = 0
-
-
-
-
+
else:
self.old_temp_time = 0
self.old_time = 0
- self.SENSOR_time = time_tmp
+ # self.SENSOR_time = time_tmp
self.HR_Onestate = 0
self.HR_OneTime = 0
self.HR_state = 0
self.old_spo2_time = 0
self.set_hsenor_crt = 0
self.old_bg_time = 0
- self.bg_times = time_tmp
+ # self.bg_times = time_tmp
+
self.BG_state = 0
- self.temp_time = time_tmp
+ # self.temp_time = time_tmp
- self.bp_timeSecond = time_tmp
+ # self.bp_timeSecond = time_tmp
self.bpauto_state = 0
- self.spo2_timeSecond = time_tmp
+ # self.spo2_timeSecond = time_tmp
self.spo2auto_state = 0
self.temp_state = 0
self.temp_one_state = 0
- self.old_temp_time = 0
-
- if battery[0] == "1":
- get_hr_state = EventMesh.publish("get_hr_state")
- get_spo2_state = EventMesh.publish("get_spo2_state")
- get_bp_state = EventMesh.publish("get_bp_state")
- get_bg_state = EventMesh.publish("get_bg_state")
- if get_hr_state != None and get_spo2_state != None and get_bp_state != None and get_bg_state != None:
- if get_hr_state == 2 or get_hr_state == 3:
-
- EventMesh.publish("set_hr_state",0)#2代表后台进入测试，定时测心率 1ui界面测试洗心率
- # if get_hr_state == 3:
- # EventMesh.publish("stop_led_timer")#设置参数
- EventMesh.debug_log("stop debug8")
- EventMesh.publish(constants.EVENT.STOP_HEART)
- elif get_spo2_state == 2 or get_spo2_state == 3:
-
- EventMesh.publish("set_spo2_state",0)#2代表后台进入测试
- # if get_spo2_state == 3:
- # EventMesh.publish("stop_led_timer")#设置参数
- EventMesh.publish(constants.EVENT.STOP_BLOOD_OXYGEN)
- EventMesh.debug_log("stop debug13")
- elif get_bp_state == 2 or get_bp_state == 3:
- EventMesh.publish("set_bp_state",0)#2代表后台进入测试
- # if get_bp_state == 3:
- # EventMesh.publish("stop_led_timer")#设置参数
- EventMesh.publish(constants.EVENT.STOP_HEART)
- EventMesh.debug_log("stop debug14")
- elif get_bg_state == 2 or get_bg_state == 3:
- EventMesh.publish("set_bg_state",0)#2代表后台进入测试
- # if get_bg_state == 3:
- # EventMesh.publish("stop_led_timer")#设置参数
- EventMesh.publish(constants.EVENT.STOP_HEART)
- EventMesh.debug_log("stop debug15")
-
- if get_temp_time != None:
- get_temp_state = EventMesh.publish("get_temp_state")
- if get_temp_state == 2 or get_temp_state == 3:
- self.temp_one_state = 0
- self.temp_state = 0
- temp = EventMesh.publish(constants.EVENT.GET_TEMP)
- temp = self.optimize_temp(temp)
- EventMesh.publish("set_temp_state",0)
+ get_hr_state = EventMesh.publish("get_hr_state")
+ get_spo2_state = EventMesh.publish("get_spo2_state")
+ get_bp_state = EventMesh.publish("get_bp_state")
+ get_bg_state = EventMesh.publish("get_bg_state")
+ if get_hr_state != None and get_spo2_state != None and get_bp_state != None and get_bg_state != None:
+ if get_hr_state > 1:
+ EventMesh.txt_log("auto stop_hr:44")
+ EventMesh.publish("set_hr_state",0)#2代表后台进入测试，定时测心率 1ui界面测试洗心率
+ # if get_hr_state == 3:
+ # EventMesh.publish("stop_led_timer")#设置参数
+ EventMesh.debug_log("stop debug8")
+ if WEAR == 1:
+ heart_value = EventMesh.publish(constants.EVENT.GET_HEART)
+ if heart_value > 50 and heart_value != None:
+ EventMesh.publish(constants.PROTOCOL.HEART_SEND,heart_value)#上传心率数据
+ EventMesh.publish(constants.EVENT.STOP_HEART)
+ elif get_spo2_state > 1:
+ EventMesh.txt_log("auto stop_spo2:44")
+ EventMesh.publish("set_spo2_state",0)#2代表后台进入测试
+ # if get_spo2_state == 3:
+ # EventMesh.publish("stop_led_timer")#设置参数
+ if WEAR == 1:
+ spo2_value = EventMesh.publish(constants.EVENT.GET_BLOOD_OXYGEN)
+ if spo2_value > 85 and spo2_value != None:
+ EventMesh.publish(constants.PROTOCOL.OXYGEN_SEND,spo2_value)
+ EventMesh.publish(constants.EVENT.STOP_BLOOD_OXYGEN)
+ EventMesh.debug_log("stop debug13")
+ elif get_bp_state > 1:
+ EventMesh.txt_log("auto stop_bp:44")
+ EventMesh.publish("set_bp_state",0)#2代表后台进入测试
+ # if get_bp_state == 3:
+ # EventMesh.publish("stop_led_timer")#设置参数
+ if WEAR == 1:
+ blood_data = get_autoblood_value()
+ if blood_data == None:
+ blood_data[0] = 0
+ blood_data[1] = 0
+
+ max_value = blood_data[0]
+ min_value = blood_data[1]
+ if max_value != 0 and min_value != 0:
+ EventMesh.publish(constants.PROTOCOL.BLOOD_SEND,[max_value,min_value])
+ EventMesh.publish(constants.EVENT.STOP_HEART)
+ EventMesh.debug_log("stop debug14")
+ elif get_bg_state > 1:
+ EventMesh.txt_log("auto stop_bg:44")
+ EventMesh.publish("set_bg_state",0)#2代表后台进入测试
+ # if get_bg_state == 3:
+ # EventMesh.publish("stop_led_timer")#设置参数
+ EventMesh.publish(constants.EVENT.STOP_HEART)
+ if WEAR == 1:
+ bgdata = get_blood_sugar_value()
+ if bgdata == None:
+ bgdata = 0
+ if bgdata != 0:
+ EventMesh.publish(constants.PROTOCOL.BLOODGLUSOCE_SEND,bgdata)#上传心率数据
+ EventMesh.debug_log("stop debug15")
+
+ if get_temp_time != None:
+ get_temp_state = EventMesh.publish("get_temp_state")
+ if get_temp_state > 1:
+ self.temp_one_state = 0
+ self.temp_state = 0
+ temp = EventMesh.publish(constants.EVENT.GET_TEMP)
+ temp = self.optimize_temp(temp)
+ EventMesh.txt_log("auto stop_temp:44")
+ EventMesh.publish("set_temp_state",0)
+ if WEAR == 1:
tmp_f_tmp = 0
tmp_d_tmp = 0
if str(temp).find(".") != -1:
if temp != None:
if temp != 0:
- EventMesh.publish("set_history_temp_value",temp)
- # EventMesh.publish("play_temp_value",temp)#播放体温数值
EventMesh.publish(constants.PROTOCOL.TEMP_SEND,[tmp_f_tmp,tmp_d_tmp])
- else:
- EventMesh.publish("set_history_temp_value",0)
- # EventMesh.publish("play_temp_value",0)#播放体温数值
- # if get_temp_state == 3:
- # EventMesh.publish("stop_led_timer")#设置参数
-
- EventMesh.publish(constants.EVENT.STOP_TEMP)
+ EventMesh.publish(constants.EVENT.STOP_TEMP)
-
+
hr_state = EventMesh.publish("get_hr_state")
heart_value = EventMesh.publish(constants.EVENT.GET_HEART)
if heart_value > 50 and heart_value != None:
EventMesh.publish("play_hr_value",heart_value)
- EventMesh.publish("set_history_hr_value",heart_value)
+ # EventMesh.publish("set_history_hr_value",heart_value)
EventMesh.publish(constants.PROTOCOL.HEART_SEND,heart_value)#上传心率数据
+
+ if EventMesh.model == "D15_" :#D15型号
+ blood_data = get_autoblood_value()
+ if blood_data == None:
+ blood_data[0] = 0
+ blood_data[1] = 0
+
+ max_value = blood_data[0]
+ min_value = blood_data[1]
+ if max_value != 0 and min_value != 0:
+ EventMesh.publish(constants.PROTOCOL.BLOOD_SEND,[max_value,min_value])
+ pass
+
else:
EventMesh.publish("play_hr_value",0)
+
+
else :
- if WEAR != 1:
+ if WEAR != 1:
EventMesh.publish("set_hr_state",0)#0代表g关闭测试
EventMesh.debug_log("stop debug7")
EventMesh.publish(constants.EVENT.STOP_HEART)
EventMesh.publish("play_spo2_value",0)
else:
- if WEAR != 1:
+ if WEAR != 1:
EventMesh.publish("set_spo2_state",0)#0代表g关闭测试
EventMesh.debug_log("stop debug8")
EventMesh.publish(constants.EVENT.STOP_BLOOD_OXYGEN)
if temp != None:
if temp != 0:
- EventMesh.publish("set_history_temp_value",temp)
+ # EventMesh.publish("set_history_temp_value",temp)
EventMesh.publish("play_temp_value",temp)#播放体温数值
EventMesh.publish(constants.PROTOCOL.TEMP_SEND,[tmp_f_tmp,tmp_d_tmp])
else:
- EventMesh.publish("set_history_temp_value",0)
+ # EventMesh.publish("set_history_temp_value",0)
EventMesh.publish("play_temp_value",0)#播放体温数值
EventMesh.publish(constants.EVENT.STOP_TEMP)
def post_processor_after_instantiation(self):
- EventMesh.subscribe("set_time_hr_spo2", self.set_time_hr_spo2)
- EventMesh.subscribe("get_time_hr_spo2", self.get_time_hr_spo2)
+ EventMesh.subscribe("set_time_hr", self.set_time_hr)
+ EventMesh.subscribe("get_time_hr", self.get_time_hr)
EventMesh.subscribe("set_hr_state", self.set_hr_state)
EventMesh.subscribe("get_hr_state", self.get_hr_state)
EventMesh.subscribe("set_spo2_state", self.set_spo2_state)
return [self.bgauto_btn,self.set_bgautotime]
- def set_time_hr_spo2(self, event, msg):
+ def set_time_hr(self, event, msg):
self.open_btn = msg[0]
self.set_time = msg[1]
EventMesh.publish("set_storage_config",["measure_time",self.set_time])
EventMesh.publish("set_storage_config",["open_hr_btn",self.open_btn])
- def get_time_hr_spo2(self, event, msg):
+ def get_time_hr(self, event, msg):
return [self.open_btn,self.set_time]
def set_hr_state(self, event, msg):
self.roll_count = 0
else:
self.roll_count = 0
-
-
- # EventMesh.debug_log("ka roll_count:",self.roll_count)
-
+ hour = utime.localtime()[3]
+ min = utime.localtime()[4]
+ EventMesh.txt_log("ka step:{} hour:{} min:{}".format(step,hour,min))
battery_caption = bat_tmp[1]
send_data = "KA,%s,%d,%d,%d"%(date,step,self.roll_count,battery_caption)
on = 0
if hrTotal != 0:
on = 1
- EventMesh.publish("set_time_hr_spo2",[on,hrTotal])
+ EventMesh.publish("set_time_hr",[on,hrTotal])
EventMesh.publish(constants.PROTOCOL.HRTSTART_SEND)
projects / mirrors / ASR1603_G5.git / commitdiff
