From: SnickerSun <snickersun@163.com>
Date: Mon, 8 Dec 2025 06:18:58 +0000 (+0800)
Subject: release雷鸟产测 V1.4
X-Git-Url: http://git.snicker.com.cn/Users/apple/Desktop/static/gitweb.css?a=commitdiff_plain;h=ad289ee0680056351f79f2e2f5526161eba0c71f;p=mirrors%2Ffactory_tool.git

release雷鸟产测 V1.4
lcd测试结束后，主动息屏，解决亮屏造成的音频测试和震动测试卡顿现象。提高测试流畅度和通过率。
---

diff --git a/mainwindow.cpp b/mainwindow.cpp
index 18ff20b..67a6f32 100644
--- a/mainwindow.cpp
+++ b/mainwindow.cpp
@@ -27,7 +27,7 @@ MainWindow::MainWindow(QWidget *parent)
     , ui(new Ui::MainWindow)
 {
     ui->setupUi(this);
-    setWindowTitle("雷鸟产测工具 V1.3");
+    setWindowTitle("雷鸟产测工具 V1.4");
     
     // 确保控制台输出使用UTF-8编码
     QTextCodec *utf8Codec = QTextCodec::codecForName("UTF-8");
@@ -1477,6 +1477,15 @@ void MainWindow::onLcdTestTimer()
         serial->write("AT^LCDTEST=2\r\n");
         qDebug() << "发送LCD退出指令: AT^LCDTEST=2";
         
+        // 发送关闭LCD指令，确保其他测试时LCD是关闭的
+        QTimer::singleShot(100, this, [this]() {
+            if (isProductionTestRunning && serial && serial->isOpen()) {
+                serial->write("AT^LCDOFF\r\n");
+                qDebug() << "发送指令: AT^LCDOFF (关闭LCD)";
+                ui->recvTextEdit->append(">>> 发送指令: AT^LCDOFF (关闭LCD)");
+            }
+        });
+        
         // LCD颜色测试完成，检查用户是否已确认
         if (!isWaitingForUserConfirm) {
             // 用户已确认，可以继续下一个测试
@@ -2013,6 +2022,15 @@ void MainWindow::showLcdTestConfirmDialog()
         serial->write("AT^LCDTEST=2\r\n");
         qDebug() << "LCD测试通过，发送停止LCD测试指令: AT^LCDTEST=2";
         
+        // 发送关闭LCD指令，确保其他测试时LCD是关闭的
+        QTimer::singleShot(100, this, [this]() {
+            if (isProductionTestRunning && serial && serial->isOpen()) {
+                serial->write("AT^LCDOFF\r\n");
+                qDebug() << "发送指令: AT^LCDOFF (关闭LCD)";
+                ui->recvTextEdit->append(">>> 发送指令: AT^LCDOFF (关闭LCD)");
+            }
+        });
+        
         // 停止LCD定时器，防止继续切换颜色和重复调用马达测试
         if (lcdTestTimer->isActive()) {
             lcdTestTimer->stop();
@@ -2044,6 +2062,15 @@ void MainWindow::showLcdTestConfirmDialog()
         serial->write("AT^LCDTEST=2\r\n");
         qDebug() << "LCD测试失败，发送停止LCD测试指令: AT^LCDTEST=2";
         
+        // 发送关闭LCD指令，确保其他测试时LCD是关闭的
+        QTimer::singleShot(100, this, [this]() {
+            if (isProductionTestRunning && serial && serial->isOpen()) {
+                serial->write("AT^LCDOFF\r\n");
+                qDebug() << "发送指令: AT^LCDOFF (关闭LCD)";
+                ui->recvTextEdit->append(">>> 发送指令: AT^LCDOFF (关闭LCD)");
+            }
+        });
+        
         // 停止LCD定时器，防止重复调用马达测试
         if (lcdTestTimer->isActive()) {
             lcdTestTimer->stop();
@@ -3366,12 +3393,19 @@ void MainWindow::performAudioTest()
     qDebug() << "音频测试通过标准设置为:" << audioLevelStandard;
 
     // 发送录音测试指令：先 AT^AUDIOTEST=5 再 AT^AUDIOTEST=7 <音量>
-    QString audioCmd1 = "AT^AUDIOTEST=5\r\n";
-    serial->write(audioCmd1.toUtf8());
-    qDebug() << "发送录音测试指令1:" << audioCmd1.trimmed();
-
-    // 稍微延迟后发送第二条指令（带音量参数）
-    QTimer::singleShot(200, this, [this]() {
+    QTimer::singleShot(0, this, [this]() {
+        if (!isProductionTestRunning || currentTestStep != TEST_AUDIO) {
+            qDebug() << "录音测试已结束或步骤变化，取消发送AUDIOTEST指令";
+            return;
+        }
+        
+        QString audioCmd1 = "AT^AUDIOTEST=5\r\n";
+        serial->write(audioCmd1.toUtf8());
+        qDebug() << "发送录音测试指令1:" << audioCmd1.trimmed();
+        ui->recvTextEdit->append(">>> 发送指令: AT^AUDIOTEST=5");
+        
+        // 稍微延迟后发送第二条指令（带音量参数）
+        QTimer::singleShot(200, this, [this]() {
         if (!isProductionTestRunning || currentTestStep != TEST_AUDIO) {
             qDebug() << "录音测试已结束或步骤变化，取消发送第二条AUDIOTEST指令";
             return;
@@ -3399,9 +3433,11 @@ void MainWindow::performAudioTest()
         QString audioCmd2 = QString("AT^AUDIOTEST=7 %1\r\n").arg(volume);
         serial->write(audioCmd2.toUtf8());
         qDebug() << "发送录音测试指令2:" << audioCmd2.trimmed();
+        ui->recvTextEdit->append(QString(">>> 发送指令: AT^AUDIOTEST=7 %1").arg(volume));
+        });
     });
 
-    // 启动 8 秒定时器，在此期间统计“fac:mic level:中”
+    // 启动 8 秒定时器，在此期间统计"fac:mic level:中"
     if (audioRecordTimer->isActive()) {
         audioRecordTimer->stop();
     }
diff --git a/releasePackage/LN_Factorytool_V1.4.zip b/releasePackage/LN_Factorytool_V1.4.zip
new file mode 100644
index 0000000..9dc414c
Binary files /dev/null and b/releasePackage/LN_Factorytool_V1.4.zip differ
diff --git a/releasePackage/LN_Factorytool_V1.4/LeiNiaoFactoryTool.exe b/releasePackage/LN_Factorytool_V1.4/LeiNiaoFactoryTool.exe
new file mode 100644
index 0000000..d2d8524
Binary files /dev/null and b/releasePackage/LN_Factorytool_V1.4/LeiNiaoFactoryTool.exe differ
diff --git a/releasePackage/LN_Factorytool_V1.4/settings.json b/releasePackage/LN_Factorytool_V1.4/settings.json
new file mode 100644
index 0000000..ad9e821
--- /dev/null
+++ b/releasePackage/LN_Factorytool_V1.4/settings.json
@@ -0,0 +1,36 @@
+{
+    "bootDetectionKeywords": [
+        "BuildVer",
+        "NAND flash ID",
+        "NAND ID:"
+    ],
+    "factoryModeCheckCommand": "AT^FACTORY",
+    "factoryModeKeywords": [
+        "FACTORY TEST MODE:"
+    ],
+    "testCheckboxes": {
+        "4g": true,
+        "bt": true,
+        "btn": true,
+        "charge": true,
+        "lcd": true,
+        "mic": true,
+        "ntc": true,
+        "vib": true
+    },
+    "testConfig": {
+        "audioLevelStandard": "静音",
+        "audioVolume": "2.0",
+        "bluetoothAddress": "",
+        "bluetoothRSSI": "",
+        "expectedModemVer": "EG800AKCN91LCR07A01M04_OCPU_QPY_BETA1022",
+        "expectedPYVer": "PY_SRV_V27",
+        "expectedVer": "",
+        "portName": "COM42 (USB-Enhanced-SERIAL CH343)"
+    },
+    "versionInfoCommands": [
+        "AT^CAT1GETVER",
+        "AT^CAT1GETSIGNAL",
+        "AT^FACTORY"
+    ]
+}