-#include "mainwindow.h"\r
-#include "./ui_mainwindow.h"\r
-// 初始化线程、状态寄存器、配置信息\r
-MainWindow::MainWindow(QWidget *parent) : QMainWindow(parent), ui(new Ui::MainWindow)\r
-{\r
- ui->setupUi(this);\r
- result_thread = new Result_Thread(this);\r
- result_thread->start();\r
- result_thread->pause();\r
- at_handler = new At_Process(this);\r
- ui_setting_read();\r
- at_set_bt_format();\r
-}\r
-\r
-// 结束线程\r
-MainWindow::~MainWindow()\r
-{\r
- if (spp_timer_handle != NULL) {\r
- spp_timer_handle->stop();\r
- spp_timer_handle = NULL;\r
- }\r
- if (spp_connected_handle != NULL) {\r
- spp_connected_handle->stop();\r
- spp_connected_handle = NULL;\r
- }\r
- ui_setting_save();\r
- result_thread->stop();\r
- result_thread->wait();\r
- if (transmit_timer_handle != NULL) {\r
- transmit_timer_handle->stop();\r
- transmit_timer_handle = NULL;\r
- }\r
- if (ui->pbtn_open_uart->isChecked()) {\r
- if (uapi_uart_close() == TRUE) {\r
- }\r
- }\r
- delete result_thread;\r
- delete at_handler;\r
- delete ui;\r
-}\r
-\r
-void MainWindow::ui_display(QString str,bool inOrOut)\r
-{\r
-// QTime Time= QTime::currentTime();//获取系统当前的时间\r
-// QString str_time = Time.toString("[hh:mm:ss ");//格式化时间\r
- ui->txtb_dispaly->moveCursor(QTextCursor::End);\r
- if(inOrOut){\r
- ui->txtb_dispaly->setTextColor(QColor(127, 255, 0));\r
- }else{\r
- ui->txtb_dispaly->setTextColor(Qt::red);\r
- }\r
-// if(inOrOut){\r
-// str_time.append("IN] : ");\r
-// }else{\r
-// str_time.append("OUT] : ");\r
-// }\r
-// str.prepend(str_time);\r
-// str+="\r\n";\r
- ui->txtb_dispaly->insertPlainText(str);\r
- ui->txtb_dispaly->moveCursor(QTextCursor::End);\r
-}\r
-\r
-void MainWindow::ui_tab_mainwindow_complete()\r
-{\r
- if (ui->stkw_stage->currentIndex() == PAGE_COMPLETE) {\r
- ui->action_complete->setChecked(true);\r
- return;\r
- }\r
- ui->stkw_stage->setCurrentIndex(PAGE_COMPLETE);\r
- ui->ledit_spp_addr->setEnabled(true);\r
- ui->connected_flag->setStyleSheet("QPushButton{background-color: rgb(255, 0, 0);}");\r
- if (spp_connected_handle != NULL) {\r
- spp_connected_handle->start(1500);\r
- }\r
- if (ui->action_board->isChecked()) {\r
- ui->action_board->setChecked(false);\r
- }\r
- if(ui->pbtn_open_uart->isChecked()){\r
- uart_close();\r
- }\r
-}\r
-void MainWindow::ui_tab_mainwindow_board()\r
-{\r
- if (ui->stkw_stage->currentIndex() == PAGE_BOARD) {\r
- ui->action_board->setChecked(true);\r
- return;\r
- }\r
- ui->stkw_stage->setCurrentIndex(PAGE_BOARD);\r
- ui->ledit_spp_addr->setEnabled(false);\r
- ui->connected_flag->setStyleSheet("QPushButton{background-color: rgb(240, 240, 240);}");\r
- if (spp_connected_handle != NULL) {\r
- spp_connected_handle->stop();\r
- }\r
- dongle_is_connected = false;\r
- if (ui->action_complete->isChecked()) {\r
- ui->action_complete->setChecked(false);\r
- }\r
- if(ui->pbtn_open_uart->isChecked()){\r
- uart_close();\r
- }\r
-\r
-}\r
-void MainWindow::ui_save_windows()\r
-{\r
- QString fname = QFileDialog::getExistingDirectory(this, "请选择文件");\r
- QFile file(fname+"/save.txt");\r
- if (!file.open(QFile::WriteOnly | QFile::Text)) //检测文件是否打开\r
- {\r
- QMessageBox::information(this, "Error Message", "Please Select a Text File!");\r
- return;\r
- }\r
-\r
- QTextStream out(&file); //分行写入文件\r
- out << ui->txtb_dispaly->toPlainText(); //这里的File_edit就是之前声明的Textedit控件的名字\r
-}\r
-// 存储config配置文件\r
-void MainWindow::ui_setting_save()\r
-{\r
- QSettings *settings = new QSettings("Setting.ini", QSettings::IniFormat);\r
-\r
- // 写入第一组数据\r
- settings->beginGroup("Uart_setting");\r
- settings->setValue("uart_com", ui->cbox_uart_com_select->currentText());\r
- settings->setValue("uart_baud", ui->cbox_uart_baud_select->currentIndex());\r
- settings->setValue("spp_addr", ui->ledit_spp_addr->text());\r
- settings->sync();\r
- settings->endGroup();\r
- // 写入第二组数据\r
- settings->beginGroup("Download_Setting");\r
- settings->setValue("download_board_path", ui->ledit_formboad_bordpath->text());\r
- settings->setValue("download_local_path", ui->ledit_frombord_savefilepath->text());\r
- settings->sync();\r
- settings->endGroup();\r
-\r
- settings->beginGroup("Upload_Setting");\r
- settings->setValue("upload_board_path", ui->ledit_toboard_boardpath->text());\r
- settings->setValue("upload_local_path", ui->ledit_toboard_filepath->text());\r
- settings->sync();\r
- settings->endGroup();\r
-\r
- settings->beginGroup("At_Setting");\r
- settings->setValue("at_mediamusicplay", ui->ledit_at_mediamusicplay->text());\r
- settings->setValue("at_mediaaudiorecord", ui->ledit_at_mediaaudiorecord->text());\r
- settings->setValue("at_fsrm", ui->ledit_at_fsrm->text());\r
- settings->setValue("at_delay_ms", ui->ledit_delay_ms->text());\r
- settings->setValue("at_spp_addr", ui->ledit_dongle_mac->text());\r
- settings->setValue("custom_module_id", ui->ledit_at_custom_moduleId->text());\r
- settings->setValue("custom_cmd_id", ui->ledit_at_custom_CmdId->text());\r
- settings->setValue("custom_payload", ui->ledit_at_custom_Payload->text());\r
- settings->sync();\r
- settings->endGroup();\r
-\r
- delete settings;\r
- settings = nullptr;\r
-}\r
-// 读取config配置\r
-void MainWindow::ui_setting_read()\r
-{\r
- uart_com_select();\r
- QSettings *settings = new QSettings("Setting.ini", QSettings::IniFormat);\r
- ui->cbox_uart_com_select->ChangeItem(settings->value("Uart_setting/uart_com").toString());\r
- ui->cbox_uart_baud_select->setCurrentIndex(settings->value("Uart_setting/uart_baud").toInt());\r
- ui->ledit_spp_addr->setText(settings->value("Uart_setting/spp_addr").toString());\r
- ui->tbw_stage_complete->setEnabled(true);\r
- ui->ledit_formboad_bordpath->setText(settings->value("Download_Setting/download_board_path").toString());\r
- ui->ledit_frombord_savefilepath->setText(settings->value("Download_Setting/download_local_path").toString());\r
- ui->ledit_toboard_boardpath->setText(settings->value("Upload_Setting/upload_board_path").toString());\r
- ui->ledit_toboard_filepath->setText(settings->value("Upload_Setting/upload_local_path").toString());\r
- ui->ledit_at_mediamusicplay->setText(settings->value("At_Setting/at_mediamusicplay").toString());\r
- ui->ledit_at_mediaaudiorecord->setText(settings->value("At_Setting/at_mediaaudiorecord").toString());\r
- ui->ledit_at_fsrm->setText(settings->value("At_Setting/at_fsrm").toString());\r
- ui->ledit_delay_ms->setText(settings->value("At_Setting/at_delay_ms").toString());\r
- ui->ledit_dongle_mac->setText(settings->value("At_Setting/at_spp_addr").toString());\r
- ui->ledit_at_custom_moduleId->setText(settings->value("At_Setting/custom_module_id").toString());\r
- ui->ledit_at_custom_CmdId->setText(settings->value("At_Setting/custom_cmd_id").toString());\r
- ui->ledit_at_custom_Payload->setText(settings->value("At_Setting/custom_payload").toString());\r
- ui->tbw_stage_complete->setEnabled(false);\r
- ui->ledit_btlo_channel->setText("0");\r
- ui->ledit_btpwr_powerchip->setText("2");\r
-}\r
-\r
-\r
-/* --------------------------------uart操作--------------------------- */\r
-void MainWindow::uart_process()\r
-{\r
- if (ui->pbtn_open_uart->isChecked()) {\r
- QString str_com = ui->cbox_uart_com_select->currentText();\r
- QString str_uart_baud = ui->cbox_uart_baud_select->currentText();\r
- uart_open(str_com,str_uart_baud);\r
- } else {\r
- uart_close();\r
- }\r
-}\r
-void MainWindow::uart_open(QString com,QString com_baud)\r
-{\r
- char buf[15] = {0};\r
- uint32_t band = com_baud.toUInt();\r
- com.replace("COM", "");\r
- int comNumber = com.toInt();\r
- if (comNumber < COM_NUMBER) {\r
- (void)sprintf_s(buf, "COM%d", comNumber);\r
- } else {\r
- (void)sprintf_s(buf, "\\\\.\\COM%d", comNumber);\r
- }\r
- if (uapi_uart_open(buf, band)) {\r
- uapi_uart_callback_register(uart_callback);\r
- result_thread->resume();\r
-\r
- if(ui->stkw_stage->currentIndex() == PAGE_COMPLETE){\r
- ui->tbw_stage_complete->setEnabled(true);\r
- ui->pbtn_spp_connect->setEnabled(true);\r
-// uapi_uart_set_currentMode(1);\r
- }else if(ui->stkw_stage->currentIndex() == PAGE_BOARD){\r
- ui->tbw_stage_board->setEnabled(true);\r
-// uapi_uart_set_currentMode(0);\r
- }\r
-\r
- ui->pbtn_open_uart->setText("关闭串口");\r
- ui_display("open uart success.\r\n",false);\r
- if(!ui->pbtn_open_uart->isChecked()){\r
- ui->pbtn_open_uart->setChecked(true);\r
- }\r
- } else {\r
- ui_display("open uart fail.\r\n",false);\r
- QMessageBox::warning(this, tr("SerialPort"), tr("Open SerialPort failed"), QMessageBox::Ok);\r
- ui->pbtn_open_uart->setChecked(false);\r
- }\r
-}\r
-void MainWindow::uart_close()\r
-{\r
- if (uapi_uart_close() == TRUE) {\r
- result_thread->pause();\r
-// ui_display("close uart success.\r\n",false);\r
- ui->tbw_stage_complete->setEnabled(false);\r
- ui->tbw_stage_board->setEnabled(false);\r
- ui->pbtn_spp_connect->setEnabled(false);\r
- ui->pbtn_open_uart->setText("打开串口");\r
- if(ui->pbtn_open_uart->isChecked()){\r
- ui->pbtn_open_uart->setChecked(false);\r
- }\r
- if (spp_connected_handle != NULL) {\r
- spp_connected_handle->stop();\r
- spp_connected_handle = NULL;\r
- }\r
- if (spp_timer_handle != NULL) {\r
- spp_timer_handle->stop();\r
- spp_timer_handle = NULL;\r
- }\r
- } else {\r
-// ui_display("close uart fail.\r\n",false);\r
- }\r
-}\r
-void MainWindow::uart_send_data()\r
-{\r
- QString str;\r
- int buf_len = 0;\r
- char* buf = nullptr;\r
- if(ui->stkw_stage->currentIndex() == PAGE_COMPLETE){\r
- str = ui->tedit_input_data->toPlainText();\r
- }else{\r
- str = ui->tedit_input_data_board->toPlainText();\r
- }\r
- uapi_uart_callback_register(uart_callback);\r
- if (ui->ckbox_hex_send->isChecked()) {\r
- QByteArray array = str.toLatin1();\r
- QByteArray hex_bytes = QByteArray::fromHex(array.data());\r
- buf_len = hex_bytes.size();\r
- buf = hex_bytes.data();\r
- str=str.toUpper();\r
- uapi_uart_tx_data(buf, buf_len);\r
- } else {\r
- if ((ui->stkw_stage->currentIndex() == PAGE_COMPLETE &&ui->ckbox_word_wrap->isChecked())||\r
- (ui->stkw_stage->currentIndex() ==PAGE_BOARD && ui->ckbox_word_wrap_board->isChecked())) {\r
- str+="\r\n";\r
- }\r
- std::string bufstr = str.toStdString();\r
- buf =(char*) bufstr.c_str();\r
- buf_len = strlen(buf);\r
- uapi_uart_tx_data(buf, buf_len);\r
- }\r
-\r
-\r
-\r
- ui_display(str,false);\r
-}\r
-\r
-// uart收到的数据进行回显到显示栏\r
-void MainWindow::uart_rx_dispaly(int buf_len, u8Piont buf)\r
-{\r
- uart_rx_flag = true;\r
- if (uart_rx_Ignoring_display) {\r
- QString str((char *)buf);\r
- if(str.contains("ADDR")){\r
- ui->ledit_dongle_mac->setText(str.mid(str.indexOf("=",0)+1,12));\r
- }\r
- return;\r
- }\r
- QString str;\r
- QByteArray data((const char*)buf, buf_len);\r
- if (ui->ckbox_Hex_Display->isChecked()) {\r
- for (int i = 0; i < data.size(); i++) {\r
- str += QString("%1 ").arg((quint8)data.at(i), 2, 16, QChar('0'));\r
- }\r
- str=str.toUpper();\r
- } else {\r
- for (int i = 0; i < data.size(); i++) {\r
- str += QString(data.at(i));\r
- }\r
- }\r
- ui_display(str,true);\r
- free(buf);\r
-}\r
-\r
-void MainWindow::uart_check_dtr_rts()\r
-{\r
- bool rts = false, dtr = false;\r
- if (ui->ckbox_rts->isChecked()) {\r
- rts = true;\r
- }\r
- if (ui->ckbox_dtr->isChecked()) {\r
- dtr = true;\r
- }\r
- if (uapi_uart_set_rts_dtr(rts, dtr) == TRUE) {\r
-// ui_display("set rts dtr success.\r\n",false);\r
- }\r
-}\r
-\r
-void MainWindow::uart_com_select()\r
-{\r
- ui->cbox_uart_com_select->clear();\r
- QStringList strlist = uart_get_enable_comm_or_port();\r
- qSort(strlist.begin(), strlist.end(),[](const QString& s1, const QString& s2){\r
- QString a1=s1;QString a2=s2;\r
- return a1.replace("COM","").toInt() < a2.replace("COM","").toInt(); });\r
- ui->cbox_uart_com_select->addItems(strlist);\r
-}\r
-void MainWindow::uart_com_switch(QString com)\r
-{\r
- QString str_uart_baud = ui->cbox_uart_baud_select->currentText();\r
- if(ui->pbtn_open_uart->isChecked()){\r
- uart_close();\r
- uart_open(com,str_uart_baud);\r
- }\r
-}\r
-void MainWindow::uart_baud_switch(QString baud)\r
-{\r
- QString str_com = ui->cbox_uart_com_select->currentText();\r
- if(ui->pbtn_open_uart->isChecked()){\r
- uart_close();\r
- uart_open(str_com,baud);\r
- }\r
-}\r
-// nIndex为索引号 bValue选择返回值为key还是value，默认为value\r
-QString MainWindow::uart_get_comm_or_port(int nIndex, bool bValue)\r
-{\r
- QString strCommRet = QObject::tr("");\r
- HKEY hKey;\r
- if (::RegOpenKeyEx(HKEY_LOCAL_MACHINE, TEXT("HARDWARE\\DEVICEMAP\\SERIALCOMM"), 0, KEY_READ, &hKey) != 0) {\r
- QMessageBox::warning(this, tr("Register"), tr("can't open register"),QMessageBox::Ok);\r
- return QObject::tr(""); // 无法打开注册表\r
- }\r
- QString strKeyMsg; // 键名\r
- QString strValueMsg; // 键值\r
- TCHAR portName[256]; // 键名数组\r
- TCHAR commName[256]; // 键值数组\r
- ulong nKeySize = sizeof(portName);\r
- ulong nValueSize = sizeof(commName);\r
- ulong nType;\r
- memset(commName,0,sizeof(commName));\r
- memset(portName,0,sizeof(portName));\r
- if (::RegEnumValue(hKey, nIndex, portName, &nKeySize, 0, &nType, (BYTE *)commName, &nValueSize) == 0) { // 列举键名\r
- // 读取键名\r
- for (uint i = 0; i < nKeySize; i++) {\r
- if (portName[i] != 0x00)\r
- strKeyMsg.append(portName[i]);\r
- }\r
- // 读取键值\r
- for (uint j = 0; j < nValueSize; j++) {\r
- if (commName[j] != 0x00)\r
- strValueMsg.append(commName[j]);\r
- }\r
- if (bValue)\r
- strCommRet = strValueMsg;\r
- else\r
- strCommRet = strKeyMsg;\r
- } else {\r
- ::RegCloseKey(hKey); // 关闭注册表\r
- return QObject::tr(""); // 无可用串口\r
- }\r
- return strCommRet;\r
-}\r
-\r
-QStringList MainWindow::uart_get_enable_comm_or_port()\r
-{\r
- QStringList CommPortList;\r
- QString strCommPath = QObject::tr("HKEY_LOCAL_MACHINE\\HARDWARE\\DEVICEMAP\\SERIALCOMM");\r
- QSettings *settings = new QSettings(strCommPath, QSettings::NativeFormat);\r
- QStringList keyList = settings->allKeys();\r
- if (!keyList.isEmpty()) {\r
- for (int i = 0; i < keyList.count(); i++)\r
- CommPortList.append(uart_get_comm_or_port(i, true));\r
- }\r
- return CommPortList;\r
-}\r
-\r
-/* ------------------------------------------------------------------- */\r
-void MainWindow::spp_connected_callback()\r
-{\r
- at_handler->at_send_cmd_string(MODULE_MCU,MCU_CMD_CHECK_CONNECTED,NULL);\r
- dongle_connected_times++;\r
- if (dongle_connected_times > 5) {\r
- ui_display("Dongle has been disconnected.\r\n",false);\r
- dongle_is_connected = false;\r
- }\r
- if (dongle_is_connected == true) {\r
- ui->connected_flag->setStyleSheet("QPushButton{background-color: rgb(0, 255, 64);}");\r
- uapi_uart_set_currentMode(1);//设置整机模式，通过蓝牙透传指令\r
- } else {\r
- ui->connected_flag->setStyleSheet("QPushButton{background-color: rgb(255, 0, 0);}");\r
- }\r
-}\r
-\r
-void MainWindow::spp_timer_callback()\r
-{\r
- bool final_ret = false;\r
- if (dongle_try_count > 5) {\r
- ui_display("\r\nNo device, check the dongle is connected.\r\n",false);\r
- final_ret = true;\r
- }\r
- if (uart_rx_flag == false) {\r
- at_handler->at_send_cmd_string(MODULE_MCU,MCU_CMD_CHECK_CONNECTED,NULL);\r
- dongle_try_count++;\r
- } else if (spp_try_count % 3 == 0) { // 每3次重新发送一次连接AT命令\r
- QString str = ui->ledit_spp_addr->text();\r
- at_handler->at_send_cmd_board(DONGLE_MODE_SPPCONN,str);\r
- } else if (spp_try_count > 10) { // 循环10次还有数据上报则表示连接失败\r
- ui_display("\r\nconnect fail.\r\n",false);\r
- final_ret = true;\r
- }\r
- if (dongle_is_connected == true) {\r
- final_ret = true;\r
- ui_display("\r\nDongle has been connected.\r\n",false);\r
- if (spp_connected_handle == NULL) {\r
- spp_connected_handle = new QTimer(this);\r
- connect(spp_connected_handle, SIGNAL(timeout()), this, SLOT(spp_connected_callback()));\r
- spp_connected_handle->start(1500);\r
- }\r
- }\r
- if (final_ret == false) {\r
- at_handler->at_send_cmd_board(DONGLE_MODE_AT,NULL);\r
- spp_try_count++;\r
- uart_rx_flag = false;\r
- ui_display(".",false);\r
- } else {\r
- spp_timer_handle->stop();\r
- spp_timer_handle = NULL;\r
- uart_rx_Ignoring_display = false;\r
- ui->pbtn_spp_connect->setEnabled(true);\r
- }\r
-}\r
-\r
-void MainWindow::spp_connect()\r
-{\r
- uart_rx_Ignoring_display = true;\r
- dongle_is_connected = false;\r
- dongle_try_count = 0;\r
- spp_try_count = 0;\r
- uapi_uart_callback_register(uart_callback);\r
- at_handler->at_send_cmd_board(DONGLE_MODE_ADDR,NULL);\r
- ui_display("spp connectting...",false);\r
- spp_timer_handle = new QTimer(this);\r
- connect(spp_timer_handle, SIGNAL(timeout()), this, SLOT(spp_timer_callback()));\r
- // spp查询定时器周期为1500ms\r
- spp_timer_handle->start(1500);\r
- ui->pbtn_spp_connect->setEnabled(false);\r
-}\r
-\r
-/* ------------------------------------------------------------------------ */\r
-/* -------------------------业务处理部分------------------------------------- */\r
-\r
-void MainWindow::transmit_ls_rx_diaplay(int transmit_ls_size, vPiont transmit_ls_buff)\r
-{\r
- if(transmit_ls_size>0){\r
- ui_display("文件名 大小\r\n",true);\r
- }\r
- uapi_ls_info_t *transmit_ls_buff_temp = (uapi_ls_info_t *)transmit_ls_buff;\r
- for (int i = 0; i < transmit_ls_size; i++) {\r
- QString strName = QString::fromUtf8((char *)(transmit_ls_buff_temp[i].name));\r
- QString strFileLen = QString::number(transmit_ls_buff_temp[i].file_size,10);\r
- if (transmit_ls_buff_temp[i].is_dir) {\r
- strName.append("/");\r
- }\r
- ui_display(strName+" "+strFileLen+"\r\n",true);\r
- ui->cbox_fromborad_filelist->addItem(strName,strFileLen);\r
- }\r
- free(transmit_ls_buff);\r
-}\r
-\r
-void MainWindow::transmit_rx_display(bool transmit_result_flag)\r
-{\r
- uint32_t total_size=0;\r
- uint32_t current_size=0;\r
- transmit_get_data_count(&total_size,¤t_size);\r
- uint32_t value = transmit_result_flag ? total_size : 0;\r
- if (transmit_timer_handle) {\r
- transmit_timer_handle->stop();\r
- transmit_timer_handle = NULL;\r
- }\r
- if (transmit_download_or_upload == TRANSMIT_UPLOAD) {\r
- ui->pbar_toboard->setValue(value);\r
- ui->pbtn_toboard_Upload->setEnabled(true);\r
- }\r
- if (transmit_download_or_upload == TRANSMIT_DOWNLOAD) {\r
- ui->pbar_fromboard->setValue(value);\r
- ui->pbtn_fromboard_download->setEnabled(true);\r
- }\r
- if (transmit_result_flag) {\r
- ui_display("download or upload file success.\r\n",false);\r
- } else {\r
- ui_display("download or upload file fail.\r\n",false);\r
- }\r
- transmit_download_or_upload = TRANSMIT_IDLE;\r
- ui->pbtn_fromboard_delete->setEnabled(true);\r
- ui->pbtn_fromboard_getfilelist->setEnabled(true);\r
-}\r
-\r
-void MainWindow::transmit_fromboard_name_change()\r
-{\r
- ui->cbox_fromborad_filelist->clear();\r
-}\r
-\r
-void MainWindow::transmit_fromboard_selectfilepath()\r
-{\r
- QString fname = QFileDialog::getExistingDirectory(this, "请选择文件");\r
- ui->ledit_frombord_savefilepath->setText(fname);\r
-}\r
-\r
-void MainWindow::transmit_fromboard_getfilelist()\r
-{\r
- QString str = ui->ledit_formboad_bordpath->text();\r
- if (str.isEmpty()) {\r
- QMessageBox::warning(this, tr("File Path"), tr("文件路径为空!"), QMessageBox::Ok);\r
- return;\r
- }\r
- ui->cbox_fromborad_filelist->clear();\r
-\r
- std::string bufstr = str.toStdString();\r
- char* buf =(char*) bufstr.c_str();\r
-\r
- int ret = uapi_ls_send(buf, strlen(buf), ls_callback);\r
- if (ret == FAIL) {\r
- QMessageBox::warning(this, tr("ls"), tr("ls fail!\r\n"), QMessageBox::Ok);\r
- }\r
- tansmit_fromborad_borad_list.push_back(str);\r
- QCompleter *com = new QCompleter(tansmit_fromborad_borad_list, this);\r
- com->setCaseSensitivity(Qt::CaseInsensitive);\r
- delete ui->ledit_formboad_bordpath->completer();\r
- ui->ledit_formboad_bordpath->setCompleter(com);\r
-}\r
-\r
-void MainWindow::transmit_fromboard_download()\r
-{\r
- QString str_savepath = ui->ledit_frombord_savefilepath->text();\r
- QString str_file_path = ui->ledit_formboad_bordpath->text();\r
- QString str_file_name = ui->cbox_fromborad_filelist->currentText();\r
- if (str_savepath.isEmpty() || str_file_path.isEmpty() || str_file_name.isEmpty()) {\r
- QMessageBox::warning(this, tr("File Path"), tr("文件路径为空!"), QMessageBox::Ok);\r
- return;\r
- }\r
- if (str_file_name.contains("/")) {\r
- QMessageBox::warning(this, tr("Board File Name"), tr("请选择正确的文件！"), QMessageBox::Ok);\r
- return;\r
- }\r
- qDebug()<<ui->cbox_fromborad_filelist->currentData().toInt();\r
- if(ui->cbox_fromborad_filelist->currentData().toInt()==0){\r
- QMessageBox::warning(this, tr("Board File Name"), tr("filesize 0"), QMessageBox::Ok);\r
- return;\r
- }\r
- if(!str_file_path.endsWith("/")){\r
- str_file_path.append("/");\r
- }\r
- str_file_path.append(str_file_name);\r
- std::string buf_temp = str_file_path.toStdString();\r
-// QByteArray buf_temp = str_file_path.toUtf8() ;\r
- char *str_file_buff = (char *)buf_temp.c_str();\r
- std::string buf_temp2 = str_savepath.toStdString();\r
-// QByteArray buf_temp2 = str_file_path.toUtf8();\r
- char *str_save_buff = (char *)buf_temp2.c_str();\r
- int ret = uapi_file_download(str_file_buff, str_save_buff, transmit_callback);\r
- if (ret == FAIL) {\r
- QMessageBox::warning(this, tr("Downloade"), tr("文件下载启动失败!"), QMessageBox::Ok);\r
- return;\r
- }\r
- transmit_progress_start();\r
- transmit_download_or_upload = TRANSMIT_DOWNLOAD;\r
- transmit_fromborad_local_list.push_back(str_savepath);\r
- QCompleter *com = new QCompleter(transmit_fromborad_local_list, this);\r
- com->setCaseSensitivity(Qt::CaseInsensitive);\r
- delete ui->ledit_frombord_savefilepath->completer();\r
- ui->ledit_frombord_savefilepath->setCompleter(com);\r
- ui->pbtn_fromboard_download->setEnabled(false);\r
- ui->pbtn_fromboard_delete->setEnabled(false);\r
- ui->pbtn_fromboard_getfilelist->setEnabled(false);\r
-}\r
-\r
-void MainWindow::transmit_fromboard_delete()\r
-{\r
- QString str_file_path = ui->ledit_formboad_bordpath->text();\r
- QString str_file_name = ui->cbox_fromborad_filelist->currentText();\r
- if (str_file_path.isEmpty() || str_file_name.isEmpty()) {\r
- QMessageBox::warning(this, tr("File Path"), tr("文件路径为空!"), QMessageBox::Ok);\r
- return;\r
- }\r
- if (str_file_name.contains("/")) {\r
- str_file_name.chop(1);\r
- } else {\r
- str_file_path.append("/");\r
- }\r
- str_file_path.append(str_file_name);\r
-\r
- std::string bufstr = str_file_path.toStdString();\r
- char* str_file_buff =(char*) bufstr.c_str();\r
-\r
-// char *str_file_buff = (char *)str_file_path.toUtf8().data();//.toStdString().c_str();\r
- int buflen = strlen(str_file_buff);\r
- int ret = uapi_file_delete(str_file_buff, buflen); // ls\r
- if (ret == FAIL) {\r
- QMessageBox::warning(this, tr("delete"), tr("delete file fail!\r\n"), QMessageBox::Ok);\r
- }\r
- ui->cbox_fromborad_filelist->removeItem(ui->cbox_fromborad_filelist->currentIndex());\r
-}\r
-\r
-void MainWindow::transmit_fromboard_stop()\r
-{\r
- if (transmit_timer_handle) {\r
- transmit_timer_handle->stop();\r
- transmit_timer_handle = NULL;\r
- }\r
- transmit_download_or_upload = TRANSMIT_IDLE;\r
- ui->pbar_fromboard->setValue(0);\r
- ui->pbtn_fromboard_download->setEnabled(true);\r
- ui->pbtn_fromboard_delete->setEnabled(true);\r
- ui->pbtn_fromboard_getfilelist->setEnabled(true);\r
- uapi_file_transmit_stop();\r
-}\r
-\r
-void MainWindow::transmit_toboard_choosefile()\r
-{\r
- QString fname = QFileDialog::getOpenFileName(this, "请选择文件");\r
- ui->ledit_toboard_filepath->setText(fname);\r
-}\r
-\r
-void MainWindow::transmit_toboard_upload()\r
-{\r
- QString board_file_path = ui->ledit_toboard_boardpath->text();\r
- QString local_file_path = ui->ledit_toboard_filepath->text();\r
- if (board_file_path.isEmpty() || local_file_path.isEmpty()) {\r
- QMessageBox::warning(this, tr("File Path"), tr("File Path Empty!"), QMessageBox::Ok);\r
- return;\r
- }\r
-\r
- std::string bufboard_file_path = board_file_path.toStdString();\r
- char* buf_board_file_path =(char*) bufboard_file_path.c_str();\r
-\r
- std::string buflocal_file_path = local_file_path.toStdString();\r
- char* buf_local_file_path =(char*) buflocal_file_path.c_str();\r
-\r
-// char *buf_board_file_path = (char *)board_file_path.toUtf8().data();//.toStdString().c_str();\r
-// char *buf_local_file_path = (char *)local_file_path.toUtf8().data();//.toStdString().c_str();\r
- int ret = uapi_file_upload(buf_board_file_path, buf_local_file_path, transmit_callback);\r
- if (ret == FAIL) {\r
- QMessageBox::warning(this, tr("Upload"), tr("文件上传启动失败!\r\n"), QMessageBox::Ok);\r
- return;\r
- }\r
- transmit_progress_start();\r
- transmit_download_or_upload = TRANSMIT_UPLOAD;\r
- transmit_toboard_local_list.push_back(local_file_path);\r
- transmit_toboard_borad_list.push_back(board_file_path);\r
- QCompleter *com1 = new QCompleter(transmit_toboard_local_list, this);\r
- com1->setCaseSensitivity(Qt::CaseInsensitive);\r
- delete ui->ledit_toboard_filepath->completer();\r
- ui->ledit_toboard_filepath->setCompleter(com1);\r
- QCompleter *com2 = new QCompleter(transmit_toboard_borad_list, this);\r
- com2->setCaseSensitivity(Qt::CaseInsensitive);\r
- delete ui->ledit_toboard_boardpath->completer();\r
- ui->ledit_toboard_boardpath->setCompleter(com2);\r
- ui->pbtn_toboard_Upload->setEnabled(false);\r
-}\r
-\r
-void MainWindow::transmit_toboard_stop()\r
-{\r
- if (transmit_timer_handle) {\r
- transmit_timer_handle->stop();\r
- transmit_timer_handle = NULL;\r
- }\r
- transmit_download_or_upload = TRANSMIT_IDLE;\r
- ui->pbar_toboard->setValue(0);\r
- ui->pbtn_toboard_Upload->setEnabled(true);\r
- uapi_file_transmit_stop();\r
-}\r
-\r
-void MainWindow::transmit_update_progress()\r
-{\r
- uint32_t total_size=0;\r
- uint32_t current_size=0;\r
- transmit_get_data_count(&total_size,¤t_size);\r
- if (transmit_download_or_upload == TRANSMIT_UPLOAD) {\r
- ui->pbar_toboard->setMaximum(total_size);\r
- ui->pbar_toboard->setValue(current_size);\r
- }\r
- if (transmit_download_or_upload == TRANSMIT_DOWNLOAD) {\r
- ui->pbar_fromboard->setMaximum(total_size);\r
- ui->pbar_fromboard->setValue(current_size);\r
- }\r
-}\r
-void MainWindow::transmit_progress_start()\r
-{\r
- transmit_timer_handle = new QTimer(this);\r
- connect(transmit_timer_handle, SIGNAL(timeout()), this, SLOT(transmit_update_progress()));\r
- // 进度条更新时间为60ms\r
- transmit_timer_handle->start(60);\r
-}\r
-void MainWindow::at_check_send_status(bool flag)\r
-{\r
- if(flag){\r
- ui_display("at cmd send success.\r\n",false);\r
- }else{\r
- QMessageBox::warning(this, tr("AT"), tr("AT send fail!\r\n"), QMessageBox::Ok);\r
- ui_display("at cmd send fail.\r\n",false);\r
- }\r
-}\r
-\r
-void MainWindow::dongle_suspend()\r
-{\r
- if(ui->stkw_stage->currentIndex() == PAGE_COMPLETE){\r
- ui->tbw_stage_complete->setEnabled(false);\r
- ui->pbtn_spp_connect->setEnabled(true);\r
- }else if(ui->stkw_stage->currentIndex() == PAGE_BOARD){\r
- ui->tbw_stage_board->setEnabled(false);\r
- }\r
-}\r
-\r
-void MainWindow::dongle_resume()\r
-{\r
- if(ui->stkw_stage->currentIndex() == PAGE_COMPLETE){\r
- ui->tbw_stage_complete->setEnabled(true);\r
- ui->pbtn_spp_connect->setEnabled(true);\r
- }else if(ui->stkw_stage->currentIndex() == PAGE_BOARD){\r
- ui->tbw_stage_board->setEnabled(true);\r
- }\r
-}\r
-\r
-void MainWindow::at_rx_display(int at_buf_len, u8Piont at_buf)\r
-{\r
- Q_UNUSED(at_buf_len);\r
- at_module_id at_module_id_temp;\r
- at_cmd_id at_cmd_id_temp;\r
- at_handler->at_get_id(&at_module_id_temp, &at_cmd_id_temp);\r
- if (at_buf[0] == MODULE_BT && at_buf[1] == BT_CMD_RX_RESULT) { // 耦合测试RxCount\r
- uint32_t rx_count = at_buf[2] + (at_buf[3] << 8);\r
- ui->ledit_display_rx_count->setText(QString::number(rx_count));\r
- } else if (at_buf[0] == MODULE_MCU && at_buf[1] == MCU_CMD_CHECK_CONNECTED) { // Dongle是否已连接\r
- dongle_is_connected = true;\r
- dongle_connected_times = 0;\r
- dongle_resume();\r
- } else if (at_buf[0] == MODULE_MCU && at_buf[1] == MCU_CMD_RETURN_VALUE) {\r
- for (int i = 0; i < 40; i++) {\r
- qDebug("buf[%d] is %d.\r\n", i, at_buf[i]);\r
- }\r
- ui_display("cmd executed " + (QString)(at_buf[2] == 0 ? "Succ!" : "Fail!") + "\r\n",false);\r
- if (at_buf[3] != 0) {\r
- QByteArray data((const char*)&at_buf[4], at_buf[3]);\r
- ui_display(QString(data),false);\r
- }\r
- } else if (at_buf[0] == at_module_id_temp && at_buf[1] == at_cmd_id_temp) {\r
- ui_display("at receive success.\r\n",false);\r
- } else {\r
- ui_display("at receive fail.\r\n",false);\r
- }\r
- free(at_buf);\r
-}\r
-\r
-void MainWindow::at_stackinfo_send()\r
-{\r
- at_check_send_status(at_handler->at_send_cmd_string(MODULE_MCU,MCU_CMD_STACKINFO,NULL));\r
-}\r
-\r
-void MainWindow::at_fsrm_send()\r
-{\r
- QString str = ui->ledit_at_fsrm->text();\r
- if (str.isEmpty()) {\r
- QMessageBox::warning(this, tr("File Path"), tr("文件路径为空!"), QMessageBox::Ok);\r
- return;\r
- }\r
- at_check_send_status(at_handler->at_send_cmd_string(MODULE_MCU,MCU_CMD_FSRM,str));\r
-}\r
-\r
-void MainWindow::at_mediamusicplay_send()\r
-{\r
- uint8_t media_buf_cmd[2] = {0x00, 0x00};\r
- QString str = ui->ledit_at_mediamusicplay->text();\r
- if (str.isEmpty()) {\r
- QMessageBox::warning(this, tr("File Path"), tr("文件路径为空!"), QMessageBox::Ok);\r
- return;\r
- }\r
- QString media_sub_str;\r
- QByteArray data((const char*)media_buf_cmd, 2);\r
- for (int i = 0; i < data.size(); i++) {\r
- media_sub_str += QString(data.at(i));\r
- }\r
- str.prepend(media_sub_str);\r
- at_check_send_status(at_handler->at_send_cmd_string(MODULE_AUDIO,AUDIO_CMD,str));\r
-}\r
-\r
-void MainWindow::at_mediamusicstop_send()\r
-{\r
- uint8_t media_buf_cmd[2] = {0x00, 0x03};\r
- QString media_sub_str;\r
- QByteArray data((const char*)media_buf_cmd, 2);\r
- for (int i = 0; i < data.size(); i++) {\r
- media_sub_str += QString(data.at(i));\r
- }\r
- at_check_send_status(at_handler->at_send_cmd_string(MODULE_AUDIO,AUDIO_CMD,media_sub_str));\r
-}\r
-\r
-void MainWindow::at_mediaaudiorecord_send()\r
-{\r
- uint8_t media_buf_cmd[2] = {0x01, 0x00};\r
- QString str = ui->ledit_at_mediaaudiorecord->text();\r
- if (str.isEmpty()) {\r
- QMessageBox::warning(this, tr("File Path"), tr("文件路径为空!"), QMessageBox::Ok);\r
- return;\r
- }\r
- QString media_sub_str;\r
- QByteArray data((const char*)media_buf_cmd, 2);\r
- for (int i = 0; i < data.size(); i++) {\r
- media_sub_str += QString(data.at(i));\r
- }\r
- str.prepend(media_sub_str);\r
- at_check_send_status(at_handler->at_send_cmd_string(MODULE_AUDIO,AUDIO_CMD,str));\r
-}\r
-\r
-/* ----------------------- 耦合测试设置 ------------------------------------------------- */\r
-void MainWindow::at_bt_delay_ms_complete()\r
-{\r
- QString str = ui->ledit_delay_ms->text();\r
- at_check_send_status(at_handler->at_send_cmd_string(MODULE_BT,BT_CMD_DELAY_MS,str));\r
-}\r
-\r
-void MainWindow::at_set_dongle_addr_complete()\r
-{\r
- QString str = ui->ledit_dongle_mac->text();\r
- if (str.isEmpty() || str.size() != 12) {\r
- QMessageBox::warning(this, tr("File Path"), tr("MAC地址为空!"), QMessageBox::Ok);\r
- return;\r
- }\r
- at_check_send_status(at_handler->at_send_cmd_string(MODULE_BT,BT_CMD_DONGLE_MAC,str));\r
-}\r
-void MainWindow::at_set_bt_format()\r
-{\r
- ui->ledit_br_rx_channel_complete->setValidator(new MyValidator(0,78,this));\r
- ui->ledit_br_tx_channel_complete->setValidator(new MyValidator(0,78,this));\r
- ui->ledit_ble_rx_channel_complete->setValidator(new MyValidator(0,39,this));\r
- ui->ledit_ble_tx_channel_complete->setValidator(new MyValidator(0,39,this));\r
- ui->ledit_br_rx_PayloadLen_complete->setValidator(new MyValidator(0,27,this));\r
- ui->ledit_br_tx_PayloadLen_complete->setValidator(new MyValidator(0,27,this));\r
- ui->ledit_ble_tx_PayloadLen_complete->setValidator(new MyValidator(0,255,this));\r
-\r
- ui->ledit_br_rx_channel_board->setValidator(new MyValidator(0,78,this));\r
- ui->ledit_br_tx_channel_board->setValidator(new MyValidator(0,78,this));\r
- ui->ledit_ble_rx_channel_board->setValidator(new MyValidator(0,39,this));\r
- ui->ledit_ble_tx_channel_board->setValidator(new MyValidator(0,39,this));\r
- ui->ledit_br_rx_PayloadLen_board->setValidator(new MyValidator(0,27,this));\r
- ui->ledit_br_tx_PayloadLen_board->setValidator(new MyValidator(0,27,this));\r
- ui->ledit_ble_tx_PayloadLen_board->setValidator(new MyValidator(0,255,this));\r
- ui->ledit_btlo_channel->setValidator(new MyValidator(0,78,this));\r
-}\r
-\r
-void MainWindow::at_check_bt_len(int packtype_index)\r
-{\r
- QComboBox *cbox = qobject_cast<QComboBox *>(sender());\r
- int len=at_handler->at_get_packet_len(packtype_index);\r
- QString name = cbox->objectName();\r
- if(name == "cbox_br_tx_PacketType_complete"){\r
- const MyValidator *validator=(MyValidator *)ui->ledit_br_tx_PayloadLen_complete->validator();\r
- delete validator;\r
- ui->ledit_br_tx_PayloadLen_complete->setPlaceholderText("Length(0-"+QString::number(len)+")");\r
- ui->ledit_br_tx_PayloadLen_complete->setValidator(new MyValidator(0,len,this));\r
- }else if(name == "cbox_br_rx_PacketType_complete"){\r
- const MyValidator *validator=(MyValidator *)ui->ledit_br_rx_PayloadLen_complete->validator();\r
- delete validator;\r
- ui->ledit_br_rx_PayloadLen_complete->setPlaceholderText("Length(0-"+QString::number(len)+")");\r
- ui->ledit_br_rx_PayloadLen_complete->setValidator(new MyValidator(0,len,this));\r
- }else if(name == "cbox_br_tx_PacketType_board"){\r
- const MyValidator *validator=(MyValidator *)ui->ledit_br_tx_PayloadLen_board->validator();\r
- delete validator;\r
- ui->ledit_br_tx_PayloadLen_board->setPlaceholderText("Length(0-"+QString::number(len)+")");\r
- ui->ledit_br_tx_PayloadLen_board->setValidator(new MyValidator(0,len,this));\r
- }else if(name == "cbox_br_rx_PacketType_board"){\r
- const MyValidator *validator=(MyValidator *)ui->ledit_br_rx_PayloadLen_board->validator();\r
- delete validator;\r
- ui->ledit_br_rx_PayloadLen_board->setPlaceholderText("Length(0-"+QString::number(len)+")");\r
- ui->ledit_br_rx_PayloadLen_board->setValidator(new MyValidator(0,len,this));\r
- }\r
-}\r
-\r
-/* -----------------------耦合测试-整机段------------------------------------------------ */\r
-void MainWindow::at_get_rx_count_complete()\r
-{\r
- at_check_send_status(at_handler->at_send_cmd_string(MODULE_BT,BT_CMD_GET_RX, NULL));\r
-}\r
-\r
-void MainWindow::at_bt_tx_complete()\r
-{\r
- QString br_tx_switch = ui->cbox_br_tx_on_or_off_complete->currentText();\r
- QString channel = ui->ledit_br_tx_channel_complete->text();\r
- int packet_type_index = ui->cbox_br_tx_PacketType_complete->currentIndex();\r
- QString payload_len = ui->ledit_br_tx_PayloadLen_complete->text();\r
- int pattern_type_index = ui->cbox_br_tx_pattern_type_complete->currentIndex();\r
- QString format=at_handler->at_get_br_format(BT_MODE_BR_TX,br_tx_switch,channel,packet_type_index,payload_len,pattern_type_index);\r
- if(format==NULL){\r
- QMessageBox::warning(this, tr("AT"), tr("length错误!"), QMessageBox::Ok);\r
- }\r
- at_check_send_status(at_handler->at_send_cmd_string(MODULE_BT,BT_CMD_BR_TX,format));\r
- dongle_is_connected = false;\r
- dongle_suspend();\r
-}\r
-\r
-void MainWindow::at_bt_rx_complete()\r
-{\r
- QString br_tx_switch = ui->cbox_br_tx_on_or_off_complete->currentText();\r
- QString channel = ui->ledit_br_rx_channel_complete->text();\r
- int packet_type_index = ui->cbox_br_rx_PacketType_complete->currentIndex();\r
- QString payload_len = ui->ledit_br_rx_PayloadLen_complete->text();\r
- int pattern_type_index = ui->cbox_br_rx_pattern_type_complete->currentIndex();\r
- QString format=at_handler->at_get_br_format(BT_MODE_BR_RX,br_tx_switch,channel,packet_type_index,payload_len,pattern_type_index);\r
- if(format==NULL){\r
- QMessageBox::warning(this, tr("AT"), tr("length错误!"), QMessageBox::Ok);\r
- }\r
- at_check_send_status(at_handler->at_send_cmd_string(MODULE_BT,BT_CMD_BR_RX,format));\r
- dongle_is_connected = false;\r
- dongle_suspend();\r
-}\r
-\r
-void MainWindow::at_ble_tx_complete()\r
-{\r
- QString br_tx_switch = ui->cbox_ble_tx_on_or_off_complete->currentText();\r
- QString channel = ui->ledit_ble_tx_channel_complete->text();\r
- int pattern_type_index = ui->cbox_ble_tx_pattern_type_complete->currentIndex();\r
- QString payload_len = ui->ledit_ble_tx_PayloadLen_complete->text();\r
- int phy_type_index = ui->cbox_ble_tx_PacketType_complete->currentIndex();\r
- QString format=at_handler->at_get_ble_format(BT_MODE_BLE_TX,br_tx_switch,channel,pattern_type_index,payload_len,phy_type_index);\r
- at_check_send_status(at_handler->at_send_cmd_string(MODULE_BT,BT_CMD_BLE_TX,format));\r
- dongle_is_connected = false;\r
- dongle_suspend();\r
-}\r
-\r
-void MainWindow::at_ble_rx_complete()\r
-{\r
- QString br_tx_switch = ui->cbox_ble_rx_on_or_off_complete->currentText();\r
- QString channel = ui->ledit_ble_rx_channel_complete->text();\r
- int phy_type_index = ui->cbox_ble_rx_PacketType_complete->currentIndex();\r
- QString format=at_handler->at_get_ble_format(BT_MODE_BLE_RX,br_tx_switch,channel,0,0,phy_type_index);\r
- at_check_send_status(at_handler->at_send_cmd_string(MODULE_BT,BT_CMD_BLE_RX,format));\r
- dongle_is_connected = false;\r
- dongle_suspend();\r
-}\r
-\r
-void MainWindow::at_custom_send()\r
-{\r
- QString moduleId = ui->ledit_at_custom_moduleId->text();\r
- QString cmdId = ui->ledit_at_custom_CmdId->text();\r
- QString payload = ui->ledit_at_custom_Payload->text();\r
- bool ok;\r
- at_check_send_status(at_handler->at_send_cmd_string((at_module_id)moduleId.toUInt(&ok,16),(at_cmd_id)cmdId.toUInt(&ok,16),payload));\r
-}\r
-/* -----------------------传导测试-单板段------------------------------------------------ */\r
-void MainWindow::at_bt_tx_board()\r
-{\r
- QString br_tx_switch = ui->cbox_br_tx_on_or_off_board->currentText();\r
- if (br_tx_switch.contains("ON") && bt_test_switch == true) {\r
- QMessageBox::warning(this, tr("操作错误"), tr("应先关闭射频测试项!"), QMessageBox::Ok);\r
- }\r
- bt_test_switch = br_tx_switch.contains("ON") ? true : false;\r
- QString channel = ui->ledit_br_tx_channel_board->text();\r
- int packet_type_index = ui->cbox_br_tx_PacketType_board->currentIndex();\r
- QString payload_len = ui->ledit_br_tx_PayloadLen_board->text();\r
- int pattern_type_index = ui->cbox_br_tx_pattern_type_board->currentIndex();\r
- QString format=at_handler->at_get_br_format(BT_MODE_BR_TX,br_tx_switch,channel,packet_type_index,payload_len,pattern_type_index);\r
- if(format==NULL){\r
- QMessageBox::warning(this, tr("AT"), tr("length错误!"), QMessageBox::Ok);\r
- }\r
- at_check_send_status(at_handler->at_send_cmd_board(BT_MODE_BR_TX,format));\r
-}\r
-void MainWindow::at_bt_rx_board()\r
-{\r
- QString br_rx_switch = ui->cbox_br_rx_on_or_off_board->currentText();\r
- if (br_rx_switch.contains("ON") && bt_test_switch == true) {\r
- QMessageBox::warning(this, tr("操作错误"), tr("应先关闭射频测试项!"), QMessageBox::Ok);\r
- }\r
- bt_test_switch = br_rx_switch.contains("ON") ? true : false;\r
- QString channel = ui->ledit_br_rx_channel_board->text();\r
- int packet_type_index = ui->cbox_br_rx_PacketType_board->currentIndex();\r
- QString payload_len = ui->ledit_br_rx_PayloadLen_board->text();\r
- int pattern_type_index = ui->cbox_br_rx_pattern_type_board->currentIndex();\r
- QString format=at_handler->at_get_br_format(BT_MODE_BR_RX,br_rx_switch,channel,packet_type_index,payload_len,pattern_type_index);\r
- if(format==NULL){\r
- QMessageBox::warning(this, tr("AT"), tr("length错误!"), QMessageBox::Ok);\r
- }\r
- at_check_send_status(at_handler->at_send_cmd_board(BT_MODE_BR_RX,format));\r
-}\r
-void MainWindow::at_ble_tx_board()\r
-{\r
- QString ble_tx_switch = ui->cbox_ble_tx_on_or_off_board->currentText();\r
- if (ble_tx_switch.contains("ON") && bt_test_switch == true) {\r
- QMessageBox::warning(this, tr("操作错误"), tr("应先关闭射频测试项!"), QMessageBox::Ok);\r
- }\r
- bt_test_switch = ble_tx_switch.contains("ON") ? true : false;\r
- QString channel = ui->ledit_ble_tx_channel_board->text();\r
- int pattern_type_index = ui->cbox_ble_tx_pattern_type_board->currentIndex();\r
- QString payload_len = ui->ledit_ble_tx_PayloadLen_board->text();\r
- int phy_type_index = ui->cbox_ble_tx_PacketType_board->currentIndex();\r
- QString format=at_handler->at_get_ble_format(BT_MODE_BLE_TX,ble_tx_switch,channel,pattern_type_index,payload_len,phy_type_index);\r
- at_check_send_status(at_handler->at_send_cmd_board(BT_MODE_BLE_TX,format));\r
-}\r
-void MainWindow::at_ble_rx_board()\r
-{\r
- QString ble_rx_switch = ui->cbox_ble_rx_on_or_off_board->currentText();\r
- if (ble_rx_switch.contains("ON") && bt_test_switch == true) {\r
- QMessageBox::warning(this, tr("操作错误"), tr("应先关闭射频测试项!"), QMessageBox::Ok);\r
- }\r
- bt_test_switch = ble_rx_switch.contains("ON") ? true : false;\r
- QString channel = ui->ledit_ble_rx_channel_board->text();\r
- int phy_type_index = ui->cbox_ble_rx_PacketType_board->currentIndex();\r
- QString format=at_handler->at_get_ble_format(BT_MODE_BLE_RX,ble_rx_switch,channel,0,0,phy_type_index);\r
- at_check_send_status(at_handler->at_send_cmd_board(BT_MODE_BLE_RX,format));\r
-}\r
-\r
-void MainWindow::at_bt_dutmode_board()\r
-{\r
- QString bt_dutmode_switch = ui->cbox_btdutmode_on_or_off_board->currentText();\r
- if (bt_dutmode_switch.contains("ON") && bt_test_switch == true) {\r
- QMessageBox::warning(this, tr("操作错误"), tr("应先关闭射频测试项!"), QMessageBox::Ok);\r
- }\r
- bt_test_switch = bt_dutmode_switch.contains("ON") ? true : false;\r
- QString format=at_handler->at_get_switch_format(bt_dutmode_switch);\r
- at_check_send_status(at_handler->at_send_cmd_board(BT_MODE_BTDUTMODE,format));\r
-}\r
-void MainWindow::at_bt_btlo_board()\r
-{\r
- QString format;\r
- format += ui->ledit_btlo_channel->text()+",";\r
- format += "7,";\r
- if(ui->cbox_btlo_on_or_off_board->currentText().contains("ON")){\r
- format+="1";\r
- }else{\r
- format+="2";\r
- }\r
- at_check_send_status(at_handler->at_send_cmd_board(BT_MODE_BTLO,format));\r
-}\r
-\r
-void MainWindow::at_bt_btpwr_board()\r
-{\r
- QString format;\r
- format += ui->ledit_btpwr_powerchip->text()+",";\r
- if(ui->cbox_btpwr_on_or_off_board->currentText().contains("ON")){\r
- format+="1";\r
- }else{\r
- format+="0";\r
- }\r
- at_check_send_status(at_handler->at_send_cmd_board(BT_MODE_BTPWR,format));\r
-}\r
-\r
-void MainWindow::at_bt_wakeup()\r
-{\r
- QString format= "012345678901234567890123456789";\r
- at_check_send_status(at_handler->at_send_cmd_board(MODE_MAX,format));\r
-}\r
-\r
-void MainWindow::at_bt_sleep()\r
-{\r
- QString format= "AT^RMVO";\r
- at_check_send_status(at_handler->at_send_cmd_board(MODE_MAX,format));\r
-}\r
-/* ----------------------------------------------------------------------------------- */\r
+#include "mainwindow.h"
+#include "ui_mainwindow.h"
+#include <QMessageBox>
+#include <QDateTime>
+#include <QDebug>
+#include <QPushButton>
+#include <QVBoxLayout>
+#include <QGridLayout>
+#include <QHBoxLayout>
+#include <QLabel>
+#include <QRegExp>
+#include <QTextStream>
+#include <QStandardPaths>
+#include <QDir>
+#include <QFile>
+#include <QDesktopServices>
+#include <QUrl>
+#include <QCoreApplication>
+#include <QTextCodec>
+
+MainWindow::MainWindow(QWidget *parent)
+ : QMainWindow(parent)
+ , ui(new Ui::MainWindow)
+{
+ ui->setupUi(this);
+ setWindowTitle("雷鸟产测工具");
+
+ // 确保控制台输出使用UTF-8编码
+ QTextCodec *utf8Codec = QTextCodec::codecForName("UTF-8");
+ QTextCodec::setCodecForLocale(utf8Codec);
+ #if QT_VERSION < QT_VERSION_CHECK(5, 0, 0)
+ QTextCodec::setCodecForCStrings(utf8Codec);
+ QTextCodec::setCodecForTr(utf8Codec);
+ #endif
+
+ // 初始化串口对象
+ serial = new QSerialPort(this);
+ connect(serial, &QSerialPort::readyRead, this, &MainWindow::readSerialData);
+
+ // 初始刷新串口列表
+ updateSerialPorts();
+
+ // 初始化按钮样式（可选：设置默认样式）
+ ui->openButton->setStyleSheet("QPushButton { padding: 5px 10px; }");
+
+ // 设置产测按钮默认蓝色样式
+ ui->openButton_2->setStyleSheet("QPushButton { background-color: #4A90E2; color: white; padding: 5px 10px; border: none; border-radius: 3px; }");
+
+ // 初始化产测相关变量
+ lcdTestTimer = new QTimer(this);
+ motorTestTimer = new QTimer(this);
+ test4GTimer = new QTimer(this);
+ signal4GTimer = new QTimer(this);
+ cat1SignalTimer = new QTimer(this);
+ testTimeoutTimer = new QTimer(this);
+ currentLcdColor = 0;
+ initRetry4GCount = 0;
+ signalTest4GCount = 0;
+ signalReceived4GCount = 0;
+ signalGood4GCount = 0;
+ pppCommandCount = 0;
+ hasReceivedSignalSim = false;
+ hasReceivedFirstSignal = false;
+ cat1SignalTestCount = 0;
+ cat1SignalReceivedCount = 0;
+ cat1SignalGoodCount = 0;
+ cat1Signal99Count = 0;
+ cat1SignalTotalValue = 0;
+ hasReceivedPppInfo = false;
+ isProductionTestRunning = false;
+ currentTestStep = TEST_IDLE;
+ lcdTestPopupShown = false;
+ motorTestPopupShown = false;
+ isWaitingForUserConfirm = false;
+ keyTestStarted = false;
+ keyTestDialog = nullptr;
+ audioTestPopupShown = false;
+ audioPlaybackPopupShown = false;
+ audioRecordTimer = new QTimer(this);
+ audioTestDialog = nullptr;
+ audioDialogLabel = nullptr;
+ audioDialogInfo = nullptr;
+ audioStartButton = nullptr;
+ audioPassButton = nullptr;
+ audioFailButton = nullptr;
+ audioRetestButton = nullptr;
+ currentAudioStep = AUDIO_PLAYING_1KHZ;
+ currentModemVersion = "";
+ currentSimStatus = -1;
+
+ // 初始化按键测试状态
+ for (int i = 0; i < 4; i++) {
+ keyTestStatus[i] = 0;
+ keyButtons[i] = nullptr;
+ }
+
+ // 连接定时器信号
+ connect(lcdTestTimer, &QTimer::timeout, this, &MainWindow::onLcdTestTimer);
+ connect(motorTestTimer, &QTimer::timeout, this, &MainWindow::onMotorTestTimer);
+ connect(test4GTimer, &QTimer::timeout, this, &MainWindow::on4GTestTimeout);
+ connect(signal4GTimer, &QTimer::timeout, this, &MainWindow::on4GSignalTimer);
+ connect(cat1SignalTimer, &QTimer::timeout, this, &MainWindow::onCat1SignalTimer);
+ connect(testTimeoutTimer, &QTimer::timeout, this, &MainWindow::onTestTimeout);
+ connect(audioRecordTimer, &QTimer::timeout, this, &MainWindow::onAudioRecordTimer);
+}
+
+MainWindow::~MainWindow()
+{
+ delete ui;
+ if (serial->isOpen()) {
+ serial->close();
+ }
+ delete serial;
+}
+
+// 刷新串口列表
+void MainWindow::on_refreshButton_clicked()
+{
+ updateSerialPorts();
+}
+
+// 更新可用串口
+void MainWindow::updateSerialPorts()
+{
+ ui->portNameBox->clear();
+ // 获取所有可用串口
+ const auto infos = QSerialPortInfo::availablePorts();
+ for (const QSerialPortInfo &info : infos) {
+ ui->portNameBox->addItem(info.portName() + " (" + info.description() + ")");
+ }
+}
+
+// 打开/关闭串口（带按钮变色效果）
+void MainWindow::on_openButton_clicked()
+{
+ if (serial->isOpen()) {
+ // 关闭串口
+ serial->close();
+ ui->openButton->setText("打开串口");
+ // 恢复按钮默认样式
+ ui->openButton->setStyleSheet("QPushButton { padding: 5px 10px; }");
+ return;
+ }
+
+ // 检查是否选择了串口
+ if (ui->portNameBox->currentText().isEmpty()) {
+ QMessageBox::warning(this, "警告", "请先选择串口");
+ return;
+ }
+
+ // 配置串口参数（固定值）
+ QString portText = ui->portNameBox->currentText();
+ QString portName = portText.left(portText.indexOf(" ("));
+ serial->setPortName(portName);
+
+ // 固定参数配置
+ serial->setBaudRate(500000); // 波特率500000
+ serial->setDataBits(QSerialPort::Data8); // 8数据位
+ serial->setParity(QSerialPort::NoParity); // 无校验位
+ serial->setStopBits(QSerialPort::OneStop); // 1停止位
+ serial->setFlowControl(QSerialPort::NoFlowControl);
+
+ // 打开串口
+ if (serial->open(QIODevice::ReadWrite)) {
+ ui->openButton->setText("关闭串口");
+ // 设置按钮为绿色（打开状态）
+ ui->openButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #4CAF50; " // 绿色背景
+ "color: white; " // 白色文字
+ "padding: 5px 10px; " // 内边距
+ "border-radius: 3px; " // 圆角
+ "}"
+ "QPushButton:hover { "
+ "background-color: #45a049; " // hover时加深颜色
+ "}"
+ );
+ } else {
+ QMessageBox::critical(this, "错误", "无法打开串口：" + serial->errorString());
+ }
+}
+
+// 发送数据
+void MainWindow::on_sendButton_clicked()
+{
+ if (!serial->isOpen()) {
+ QMessageBox::warning(this, "警告", "请先打开串口");
+ return;
+ }
+
+ // 获取发送区文本
+ QString sendStr = ui->sendTextEdit->toPlainText();
+ if (sendStr.isEmpty()) return;
+
+ // 在发送内容末尾添加\r\n（回车换行）
+ sendStr += "\r\n";
+
+ // 发送数据（默认ASCII模式，包含自动添加的换行）
+ QByteArray sendData = sendStr.toUtf8();
+ serial->write(sendData);
+}
+
+
+// 清空接收区
+void MainWindow::on_clearRecvButton_clicked()
+{
+ ui->recvTextEdit->clear();
+}
+
+// 清空发送区
+void MainWindow::on_clearSendButton_clicked()
+{
+ ui->sendTextEdit->clear();
+}
+
+
+void MainWindow::ShowSoftVer(const QString& data)
+{
+ // 查找"BuildVer:"的起始位置（大小写不敏感）
+ int verStart = data.indexOf("BuildVer:", 0, Qt::CaseInsensitive);
+
+ if (verStart == -1) {
+ return; // 未找到BuildVer:，直接返回
+ }
+
+ // 计算版本信息的起始位置（跳过"BuildVer:"）
+ const QString key = "BuildVer:";
+ verStart += key.length();
+
+
+ // 查找结尾的换行符\n（版本信息结束标志）
+ int verEnd = data.indexOf('\n', verStart);
+
+ if (verEnd == -1) {
+ return; // 未找到换行符，数据不完整，返回
+ }
+
+ // 提取从BuildVer:之后到换行符之前的内容（即版本信息）
+ QString verInfo = data.mid(verStart, verEnd - verStart);
+
+ // 去除可能的前后空白字符（如空格、制表符）
+ verInfo = verInfo.trimmed();
+
+ // 显示到文本框
+ ui->VerlineEdit->setText(verInfo);
+
+ // 校验期望VER
+ QString expectedVer = ui->expectedVerLineEdit ? ui->expectedVerLineEdit->text().trimmed() : QString();
+ if (!expectedVer.isEmpty() && verInfo != expectedVer) {
+ ui->statusbar->showMessage("版本不一致: 实际VER=" + verInfo + " 期望VER=" + expectedVer, 5000);
+ QMessageBox::critical(this, "版本校验失败", "VER不一致，测试失败!\n实际: " + verInfo + "\n期望: " + expectedVer);
+ isProductionTestRunning = false;
+ currentTestStep = TEST_COMPLETED;
+ showFinalTestResult();
+ return;
+ }
+}
+
+
+
+
+// 检测g_VibratorFunc函数，判断马达开启是否通过
+void MainWindow::CheckVibratorFunc(const QString& data)
+{
+ // 查找"g_VibratorFunc"的位置，并且只在马达测试阶段且未显示过弹窗时弹出
+ if (data.indexOf("g_VibratorFunc") != -1 && currentTestStep == TEST_MOTOR &&
+ !motorTestPopupShown && isProductionTestRunning) {
+
+ qDebug() << "检测到g_VibratorFunc，马达开启通过";
+ qDebug() << "准备显示马达测试确认弹窗";
+
+ // 标记弹窗已显示，避免重复弹出
+ motorTestPopupShown = true;
+ isWaitingForUserConfirm = true;
+
+ // 停止超时检测，因为已经收到响应
+ if (testTimeoutTimer->isActive()) {
+ testTimeoutTimer->stop();
+ qDebug() << "马达测试收到响应，停止超时检测";
+ }
+
+ // 暂停马达定时器，等待用户确认
+ if (motorTestTimer->isActive()) {
+ motorTestTimer->stop();
+ qDebug() << "暂停马达测试定时器，等待用户确认";
+ }
+
+ // 弹出确认对话框让测试人员确认马达是否震动
+ QMessageBox msgBox(this);
+ msgBox.setWindowTitle("马达测试确认");
+ msgBox.setText("马达测试已开启，请测试人员检查马达是否震动。");
+ msgBox.setInformativeText("请选择马达测试结果：");
+ msgBox.setIcon(QMessageBox::Question);
+
+ // 设置弹窗尺寸更大
+ msgBox.resize(400, 200);
+
+ // 添加自定义按钮
+ QPushButton *successButton = msgBox.addButton("✓ 测试通过", QMessageBox::AcceptRole);
+ QPushButton *failButton = msgBox.addButton("✗ 测试失败", QMessageBox::RejectRole);
+ QPushButton *retestButton = msgBox.addButton("🔄 重新测试", QMessageBox::ResetRole);
+
+ // 设置按钮样式
+ successButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #4CAF50; " // 绿色背景
+ "color: white; " // 白色文字
+ "padding: 12px 20px; " // 增大内边距
+ "border-radius: 4px; " // 圆角
+ "font-weight: bold; " // 粗体
+ "font-size: 16px; " // 增大字体
+ "}"
+ "QPushButton:hover { "
+ "background-color: #45a049; " // hover时加深颜色
+ "}"
+ );
+
+ failButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #f44336; " // 红色背景
+ "color: white; " // 白色文字
+ "padding: 12px 20px; " // 增大内边距
+ "border-radius: 4px; " // 圆角
+ "font-weight: bold; " // 粗体
+ "font-size: 16px; " // 增大字体
+ "}"
+ "QPushButton:hover { "
+ "background-color: #da190b; " // hover时加深颜色
+ "}"
+ );
+
+ retestButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #FF9800; " // 橙色背景
+ "color: white; " // 白色文字
+ "padding: 12px 20px; " // 增大内边距
+ "border-radius: 4px; " // 圆角
+ "font-weight: bold; " // 粗体
+ "font-size: 16px; " // 增大字体
+ "}"
+ "QPushButton:hover { "
+ "background-color: #F57C00; " // hover时加深颜色
+ "}"
+ );
+
+ // 显示对话框并等待用户选择
+ msgBox.exec();
+
+ // 用户已做出选择，取消等待状态
+ isWaitingForUserConfirm = false;
+
+ // 无论用户选择什么，都先停止马达
+ serial->write("AT^VIBRATORTIMER=0\r\n");
+ qDebug() << "发送马达停止指令: AT^VIBRATORTIMER=0";
+
+ // 根据用户选择处理结果
+ if (msgBox.clickedButton() == successButton) {
+ // 测试人员确认马达震动正常
+ qDebug() << "测试人员确认：马达震动正常";
+
+ ui->statusbar->showMessage("马达测试通过 - 震动正常！", 3000);
+ updateTestStatus("motor", STATUS_SUCCESS);
+
+ } else if (msgBox.clickedButton() == failButton) {
+ // 测试人员确认马达震动异常
+ qDebug() << "测试人员确认：马达震动异常";
+
+ ui->statusbar->showMessage("马达测试失败 - 震动异常！", 3000);
+ updateTestStatus("motor", STATUS_FAILED);
+
+ } else if (msgBox.clickedButton() == retestButton) {
+ // 重新测试马达
+ qDebug() << "用户选择重新测试马达";
+ ui->statusbar->showMessage("停止马达震动，准备重新测试...", 2000);
+
+ // 先发送停止马达震动指令
+ serial->write("AT^VIBRATORTIMER=0\r\n");
+ qDebug() << "发送停止马达指令: AT^VIBRATORTIMER=0";
+
+ // 重置马达测试状态
+ motorTestPopupShown = false;
+ isWaitingForUserConfirm = false;
+
+ // 延迟1秒后重新开始马达测试
+ QTimer::singleShot(1000, this, [this]() {
+ if (!isProductionTestRunning) return; // 确保产测还在运行
+
+ qDebug() << "1秒延迟后开始重新测试马达";
+ ui->statusbar->showMessage("重新开始马达测试", 2000);
+ currentTestStep = TEST_MOTOR;
+ performMotorTest();
+ });
+ return; // 直接返回，不继续后续流程
+ }
+
+ // 用户确认完成，马达测试结束，开始按键测试
+ if (isProductionTestRunning && currentTestStep == TEST_MOTOR) {
+ qDebug() << "马达测试确认完成，开始按键测试";
+ currentTestStep = TEST_KEY;
+ performKeyTest();
+ }
+ }
+}
+
+// 提取IMEI信息（支持多种格式）
+void MainWindow::ShowPppInfoIMEI(const QString& data)
+{
+ QString imeiInfo;
+
+ qDebug() << "开始提取IMEI，原始数据:" << data.trimmed();
+
+ // 优先处理直接以数字开头的格式（最常见的新格式）
+ QRegExp imeiPattern("^(\\d{15})");
+ if (imeiPattern.indexIn(data.trimmed()) == 0) {
+ imeiInfo = imeiPattern.cap(1);
+ qDebug() << "使用数字开头格式提取IMEI:" << imeiInfo;
+ }
+ // 方法2：查找"IMEI:"标识的格式（传统格式）
+ else {
+ int start = data.indexOf("IMEI:", 0, Qt::CaseInsensitive);
+ if (start != -1) {
+ // 计算IMEI号码的起始位置（跳过"IMEI: "）
+ const QString key = "IMEI:";
+ start += key.length();
+
+ // 跳过可能的空格
+ while (start < data.length() && data.at(start) == ' ') {
+ start++;
+ }
+
+ // 查找行结束标志（换行符或字符串结束）
+ int end = data.indexOf('\n', start);
+ if (end == -1) {
+ end = data.indexOf('\r', start);
+ if (end == -1) {
+ end = data.length();
+ }
+ }
+
+ // 提取IMEI信息
+ imeiInfo = data.mid(start, end - start).trimmed();
+ qDebug() << "使用IMEI:格式提取IMEI:" << imeiInfo;
+ }
+ // 方法3：查找"imei:"标识的格式
+ else {
+ start = data.indexOf("imei:", 0, Qt::CaseInsensitive);
+ if (start != -1) {
+ // 计算IMEI号码的起始位置（跳过"imei:"）
+ const QString key = "imei:";
+ start += key.length();
+
+ // 查找@符号作为结束标志
+ int end = data.indexOf('@', start);
+ if (end == -1) {
+ // 如果没有@符号，查找行结束标志
+ end = data.indexOf('\n', start);
+ if (end == -1) {
+ end = data.indexOf('\r', start);
+ if (end == -1) {
+ end = data.length();
+ }
+ }
+ }
+
+ // 提取IMEI信息
+ imeiInfo = data.mid(start, end - start).trimmed();
+ qDebug() << "使用imei:格式提取IMEI:" << imeiInfo;
+ } else {
+ qDebug() << "未找到任何IMEI格式，数据:" << data.trimmed();
+ return;
+ }
+ }
+ }
+
+ // 验证IMEI格式是否有效
+ if (!imeiInfo.isEmpty() && isValidIMEI(imeiInfo)) {
+ // 显示到IMEI文本框
+ ui->IMEIlineEdit->setText(imeiInfo);
+ qDebug() << "最终提取的IMEI:" << imeiInfo;
+ } else {
+ if (imeiInfo.isEmpty()) {
+ qDebug() << "IMEI信息为空，数据:" << data.trimmed();
+ } else {
+ qDebug() << "IMEI格式不正确，不显示到界面，IMEI:" << imeiInfo;
+ ui->statusbar->showMessage("IMEI格式不正确: " + imeiInfo, 3000);
+ }
+ }
+}
+
+// 提取ICCID信息（支持多种格式）
+void MainWindow::ShowPppInfoICCID(const QString& data)
+{
+ QString iccidInfo;
+
+ // 方法1：使用正则表达式提取@iccid:后面的数字字母组合
+ QRegExp iccidRegex("@?iccid:([0-9A-Fa-f]{19,20})(?:@|\\s|$)", Qt::CaseInsensitive);
+ if (iccidRegex.indexIn(data) != -1) {
+ iccidInfo = iccidRegex.cap(1);
+ qDebug() << "使用正则表达式提取ICCID:" << iccidInfo;
+ } else {
+ // 方法2：传统方式查找"ICCID:"
+ int start = data.indexOf("ICCID:", 0, Qt::CaseInsensitive);
+ if (start == -1) {
+ qDebug() << "未找到ICCID:标识";
+ return;
+ }
+
+ // 计算ICCID号码的起始位置（跳过"ICCID:"）
+ start += 6; // "ICCID:"的长度
+
+ // 跳过可能的空格
+ while (start < data.length() && data.at(start) == ' ') {
+ start++;
+ }
+
+ // 查找ICCID结束标志（@符号、换行符或字符串结束）
+ int end = data.indexOf('@', start);
+ if (end == -1) {
+ end = data.indexOf('\n', start);
+ if (end == -1) {
+ end = data.indexOf('\r', start);
+ if (end == -1) {
+ end = data.length();
+ }
+ }
+ }
+
+ // 提取ICCID信息
+ iccidInfo = data.mid(start, end - start).trimmed();
+ qDebug() << "使用传统方式提取ICCID:" << iccidInfo;
+ }
+
+ // 验证ICCID格式是否有效
+ if (isValidICCID(iccidInfo)) {
+ // 显示到ICCID文本框
+ ui->ICCIDlineEdit->setText(iccidInfo);
+ qDebug() << "提取的ICCID:" << iccidInfo;
+ } else {
+ qDebug() << "ICCID格式不正确，不显示到界面，ICCID:" << iccidInfo;
+ ui->statusbar->showMessage("ICCID格式不正确: " + iccidInfo, 3000);
+ }
+}
+
+// 提取Modem Version信息（支持多种格式）
+void MainWindow::ShowPppInfoModemVer(const QString& data)
+{
+ QString modemVerInfo;
+ int start;
+
+ // 方法1：查找"Modem Version:"标识的格式（传统格式）
+ start = data.indexOf("Modem Version:", 0, Qt::CaseInsensitive);
+ if (start != -1) {
+ // 计算版本信息的起始位置（跳过"Modem Version: "）
+ const QString key = "Modem Version:";
+ start += key.length();
+
+ // 跳过可能的空格
+ while (start < data.length() && data.at(start) == ' ') {
+ start++;
+ }
+
+ // 查找行结束标志（换行符或字符串结束）
+ int end = data.indexOf('\n', start);
+ if (end == -1) {
+ end = data.indexOf('\r', start);
+ if (end == -1) {
+ end = data.length();
+ }
+ }
+
+ // 提取Modem版本信息
+ modemVerInfo = data.mid(start, end - start).trimmed();
+ }
+ // 方法2：查找"@modemVer:"标识的格式（新格式）
+ else {
+ start = data.indexOf("@modemVer:", 0, Qt::CaseInsensitive);
+ if (start != -1) {
+ // 计算版本信息的起始位置（跳过"@modemVer:"）
+ const QString key = "@modemVer:";
+ start += key.length();
+
+ // 查找行结束标志（换行符或字符串结束）
+ int end = data.indexOf('\n', start);
+ if (end == -1) {
+ end = data.indexOf('\r', start);
+ if (end == -1) {
+ end = data.length();
+ }
+ }
+
+ // 提取Modem版本信息
+ modemVerInfo = data.mid(start, end - start).trimmed();
+ qDebug() << "使用@modemVer:格式提取Modem Version:" << modemVerInfo;
+ }
+ // 方法3：查找"modemver(...)"括号格式
+ else {
+ // 使用正则表达式提取括号内的内容
+ QRegExp modemPattern("modemver\\(([^)]+)\\)", Qt::CaseInsensitive);
+ if (modemPattern.indexIn(data) != -1) {
+ modemVerInfo = modemPattern.cap(1);
+ qDebug() << "使用括号格式提取Modem Version:" << modemVerInfo;
+ } else {
+ qDebug() << "未找到Modem Version信息，数据格式:" << data.trimmed();
+ return;
+ }
+ }
+ }
+
+ // 验证Modem Version是否有效（不为空即可）
+ if (!modemVerInfo.isEmpty()) {
+ // 保存到成员变量
+ currentModemVersion = modemVerInfo;
+ // 显示到ModemVer文本框
+ ui->ModemVerlineEdit->setText(modemVerInfo);
+ qDebug() << "提取的Modem Version:" << modemVerInfo;
+ qDebug() << "MODEM类型判断: " << (isEGModem() ? "EG系列" : "非EG系列");
+
+ modemVerInfo = modemVerInfo.replace("!", "");
+ currentModemVersion = modemVerInfo;
+ ui->ModemVerlineEdit->setText(modemVerInfo);
+
+ // 校验期望MODEM_VER
+ QString expectedModem = ui->expectedModemVerLineEdit ? ui->expectedModemVerLineEdit->text().trimmed() : QString();
+ qDebug() << "提取的Modem Version:" << modemVerInfo;
+ qDebug() << "期望的Modem Version:" << expectedModem;
+ if (!expectedModem.isEmpty() && modemVerInfo.compare(expectedModem, Qt::CaseSensitive) != 0) {
+ ui->statusbar->showMessage("MODEM版本不一致: 实际=" + modemVerInfo + " 期望=" + expectedModem, 5000);
+ QMessageBox::critical(this, "版本校验失败", "MODEM_VER不一致，测试失败!\n实际: " + modemVerInfo + "\n期望: " + expectedModem);
+ isProductionTestRunning = false;
+ currentTestStep = TEST_COMPLETED;
+ showFinalTestResult();
+ return;
+ }
+ } else {
+ qDebug() << "Modem Version信息为空，数据:" << data.trimmed();
+ }
+}
+
+// 提取PYVER Version信息（支持多种格式）
+void MainWindow::ShowPppInfoPYVer(const QString& data)
+{
+ QString PYVerInfo;
+ int start;
+
+ // 方法1：查找"Modem Version:"标识的格式（传统格式）
+ start = data.indexOf("PYVER Version:", 0, Qt::CaseInsensitive);
+ if (start != -1) {
+ // 计算版本信息的起始位置（跳过"Modem Version: "）
+ const QString key = "PYVER Version:";
+ start += key.length();
+
+ // 跳过可能的空格
+ while (start < data.length() && data.at(start) == ' ') {
+ start++;
+ }
+
+ // 查找行结束标志（换行符或字符串结束）
+ int end = data.indexOf('\n', start);
+ if (end == -1) {
+ end = data.indexOf('\r', start);
+ if (end == -1) {
+ end = data.length();
+ }
+ }
+
+ // 提取Modem版本信息
+ PYVerInfo = data.mid(start, end - start).trimmed();
+ }
+ // 方法2：查找"@modemVer:"标识的格式（新格式）
+ else {
+ start = data.indexOf("@pyver:", 0, Qt::CaseInsensitive);
+ if (start != -1) {
+ // 计算版本信息的起始位置（跳过"@modemVer:"）
+ const QString key = "@pyver:";
+ start += key.length();
+
+ // 查找行结束标志（换行符或字符串结束）
+ int end = data.indexOf('\n', start);
+ if (end == -1) {
+ end = data.indexOf('\r', start);
+ if (end == -1) {
+ end = data.length();
+ }
+ }
+
+ // 提取Modem版本信息
+ PYVerInfo = data.mid(start, end - start).trimmed();
+ qDebug() << "使用@pyver:格式提取pyver:" << PYVerInfo;
+ }
+ // 方法3：查找"modemver(...)"括号格式
+ else {
+ // 使用正则表达式提取括号内的内容
+ QRegExp PYPattern("pyver\\(([^)]+)\\)", Qt::CaseInsensitive);
+ if (PYPattern.indexIn(data) != -1) {
+ PYVerInfo = PYPattern.cap(1);
+ qDebug() << "使用括号格式提取pvver :" << PYVerInfo;
+ } else {
+ qDebug() << "使用括号格式提取pvver :" << data.trimmed();
+ return;
+ }
+ }
+ }
+
+ // 验证Modem Version是否有效（不为空即可）
+ if (!PYVerInfo.isEmpty()) {
+ // 保存到成员变量
+ currentPYVerVersion = PYVerInfo;
+ // 显示到ModemVer文本框
+ ui->PYVerlineEdit->setText(PYVerInfo);
+ qDebug() << "提取的PYVER Version:" << PYVerInfo;
+ qDebug() << "MODEM类型判断: " << (isEGModem() ? "EG系列" : "非EG系列");
+
+ // 校验期望MODEM_VER
+ QString expectedPYVER = ui->expectedPYVerLineEdit ? ui->expectedPYVerLineEdit->text().trimmed() : QString();
+ if (!expectedPYVER.isEmpty() && PYVerInfo.compare(expectedPYVER, Qt::CaseSensitive) != 0) {
+ ui->statusbar->showMessage("PYVER版本不一致: 实际=" + PYVerInfo + " 期望=" + expectedPYVER, 5000);
+ QMessageBox::critical(this, "版本校验失败", "PYVER不一致，测试失败!\n实际: " + PYVerInfo + "\n期望: " + expectedPYVER);
+ isProductionTestRunning = false;
+ currentTestStep = TEST_COMPLETED;
+ showFinalTestResult();
+ return;
+ }
+ } else {
+ qDebug() << "PYVER Version信息为空，数据:" << data.trimmed();
+ }
+}
+
+// IMEI格式验证函数 - IMEI应为15位数字
+bool MainWindow::isValidIMEI(const QString& imei)
+{
+ // 检查是否为空
+ if (imei.isEmpty()) {
+ return false;
+ }
+
+ // 检查长度是否为15位
+ if (imei.length() != 15) {
+ qDebug() << "IMEI长度不正确，应为15位，实际为:" << imei.length() << "位，IMEI:" << imei;
+ return false;
+ }
+
+ // 检查是否全为数字
+ for (int i = 0; i < imei.length(); i++) {
+ if (!imei.at(i).isDigit()) {
+ qDebug() << "IMEI包含非数字字符，IMEI:" << imei;
+ return false;
+ }
+ }
+
+ qDebug() << "IMEI格式验证通过:" << imei;
+ return true;
+}
+
+// ICCID格式验证函数 - ICCID应为19-20位字母数字组合
+bool MainWindow::isValidICCID(const QString& iccid)
+{
+ // 检查是否为空
+ if (iccid.isEmpty()) {
+ return false;
+ }
+
+ // 检查长度是否为19-20位
+ if (iccid.length() < 19 || iccid.length() > 20) {
+ qDebug() << "ICCID长度不正确，应为19-20位，实际为:" << iccid.length() << "位，ICCID:" << iccid;
+ return false;
+ }
+
+ // 检查是否为字母数字组合（允许数字和字母）
+ for (int i = 0; i < iccid.length(); i++) {
+ QChar ch = iccid.at(i);
+ if (!ch.isDigit() && !ch.isLetter()) {
+ qDebug() << "ICCID包含非法字符（只允许数字和字母），ICCID:" << iccid;
+ return false;
+ }
+ }
+
+ qDebug() << "ICCID格式验证通过:" << iccid;
+ return true;
+}
+
+// MODEM类型判断函数 - 判断是否为EG系列MODEM
+bool MainWindow::isEGModem() const
+{
+ bool result = currentModemVersion.startsWith("EG", Qt::CaseInsensitive);
+
+ if(!ui->PYVerlineEdit->text().isEmpty())
+ {
+ qDebug() << "存在PYVER版本，判断为EG版本" << currentPYVerVersion;
+ return true;
+ }
+ // else {
+ // qDebug() << "不存在PYVER版本，判断为非EG版本" << PYVerInfo;
+ // return false;
+ // }
+
+ qDebug() << "isEGModem() 调用 - MODEM版本:" << currentModemVersion << "，结果:" << (result ? "EG系列" : "非EG系列");
+ return result;
+}
+
+// 解析MESSAGE_4G_NETWORK_STAT_CHANGED格式数据
+void MainWindow::parseNetworkStatChanged(const QString& data)
+{
+ qDebug() << "开始解析MESSAGE_4G_NETWORK_STAT_CHANGED数据:" << data.trimmed();
+
+ // 使用正则表达式解析各个字段
+ // 格式：netstat(0),signal(99),sim(1),network(GSM),imei(860132064650112),iccid(898604B7192590313291),operator(-1)
+
+ // 解析netstat
+ QRegExp netstatRegex("netstat\\((\\d+)\\)");
+ if (netstatRegex.indexIn(data) != -1) {
+ int netstat = netstatRegex.cap(1).toInt();
+ qDebug() << "解析到netstat值:" << netstat;
+ }
+
+ // 解析signal值
+ QRegExp signalRegex("signal\\((\\d+)\\)");
+ if (signalRegex.indexIn(data) != -1) {
+ int signalValue = signalRegex.cap(1).toInt();
+ qDebug() << "解析到signal值:" << signalValue;
+
+ // 将signal值显示到界面
+ ui->recvTextEdit->append(QString("Network Stat Signal值: %1").arg(signalValue));
+ ui->statusbar->showMessage(QString("检测到Network Stat Signal值: %1").arg(signalValue), 2000);
+
+ // 如果正在进行4G测试，处理signal值
+ if (isProductionTestRunning && (currentTestStep == TEST_PPP_INIT || currentTestStep == TEST_PPP_SIGNAL)) {
+ // 构造类似@sim:@signal:格式的数据供现有逻辑处理
+ QString simulatedData = QString("@sim:%1@signal:%2@").arg(1).arg(signalValue); // 假设sim为1
+
+ // 解析sim值（从数据中提取实际值）
+ QRegExp simRegex("sim\\((\\d+)\\)");
+ if (simRegex.indexIn(data) != -1) {
+ int simValue = simRegex.cap(1).toInt();
+ simulatedData = QString("@sim:%1@signal:%2@").arg(simValue).arg(signalValue);
+ qDebug() << "解析到sim值:" << simValue;
+
+ // 保存SIM卡状态
+ currentSimStatus = simValue;
+ qDebug() << "更新SIM卡状态:" << (currentSimStatus == 1 ? "已插入" : "未插入");
+ }
+
+ qDebug() << "构造模拟数据供现有逻辑处理:" << simulatedData;
+ checkSignalAndSimValues(simulatedData);
+ }
+ }
+
+ // 解析sim值
+ QRegExp simRegex("sim\\((\\d+)\\)");
+ if (simRegex.indexIn(data) != -1) {
+ int simValue = simRegex.cap(1).toInt();
+ qDebug() << "解析到sim值:" << simValue;
+
+ // 保存SIM卡状态
+ currentSimStatus = simValue;
+ qDebug() << "更新SIM卡状态:" << (currentSimStatus == 1 ? "已插入" : "未插入");
+ }
+
+ // 解析network类型
+ QRegExp networkRegex("network\\(([^)]+)\\)");
+ if (networkRegex.indexIn(data) != -1) {
+ QString networkType = networkRegex.cap(1);
+ qDebug() << "解析到network类型:" << networkType;
+ }
+
+ // 解析IMEI
+ QRegExp imeiRegex("imei\\((\\d{15})\\)");
+ if (imeiRegex.indexIn(data) != -1) {
+ QString imei = imeiRegex.cap(1);
+ qDebug() << "解析到IMEI:" << imei;
+
+ // 验证IMEI格式
+ if (isValidIMEI(imei)) {
+ ui->IMEIlineEdit->setText(imei);
+ qDebug() << "IMEI格式验证通过，已更新到界面:" << imei;
+ } else {
+ qDebug() << "IMEI格式验证失败:" << imei;
+ }
+ }
+
+ // 解析ICCID
+ QRegExp iccidRegex("iccid\\(([0-9A-Fa-f]{19,20})\\)");
+ if (iccidRegex.indexIn(data) != -1) {
+ QString iccid = iccidRegex.cap(1);
+ qDebug() << "解析到ICCID:" << iccid;
+
+ // 验证ICCID格式
+ if (isValidICCID(iccid)) {
+ ui->ICCIDlineEdit->setText(iccid);
+ qDebug() << "ICCID格式验证通过，已更新到界面:" << iccid;
+ } else {
+ qDebug() << "ICCID格式验证失败:" << iccid;
+ }
+ }
+
+ // 解析operator
+ QRegExp operatorRegex("operator\\(([^)]+)\\)");
+ if (operatorRegex.indexIn(data) != -1) {
+ QString operatorValue = operatorRegex.cap(1);
+ qDebug() << "解析到operator值:" << operatorValue;
+ }
+}
+
+// 串口数据接收处理函数
+void MainWindow::readSerialData()
+{
+ QByteArray recvData = serial->readAll();
+ if (recvData.isEmpty()) {
+ return;
+ }
+
+ // 将新接收的数据追加到缓存
+ recvBuffer += QString::fromUtf8(recvData);
+
+ // 循环处理缓存中所有完整的行（以\n为结束标志）
+ while (recvBuffer.contains('\n')) {
+ int newlineIndex = recvBuffer.indexOf('\n');
+ QString line = recvBuffer.left(newlineIndex + 1);
+ recvBuffer = recvBuffer.mid(newlineIndex + 1);
+
+ QString processLine = line;
+
+ // 处理fac:开头的行
+ if (line.startsWith("fac:")) {
+ processLine = line.mid(4); // 移除"fac:"前缀
+ }
+
+ // 显示到接收区（如果是fac:开头的行）
+ if (line.startsWith("fac:")) {
+ ui->recvTextEdit->insertPlainText(processLine);
+ ui->recvTextEdit->moveCursor(QTextCursor::End);
+ }
+
+ // 处理所有数据提取（不管是否以fac:开头）（大小写不敏感）
+ if (processLine.indexOf("BuildVer:", 0, Qt::CaseInsensitive) != -1) {
+ ShowSoftVer(processLine);
+ }
+
+ // 检测g_VibratorFunc，判断马达开启是否通过
+ if (processLine.indexOf("g_VibratorFunc") != -1) {
+ CheckVibratorFunc(processLine);
+ }
+
+ // 检测wstp_print格式的BTMAC和CyweeChipInfo数据（不需要fac:开头）
+ if (line.contains("^^^^ BTMAC=") && line.contains("^^^^ CyweeChipInfo=")) {
+ // 显示到接收区
+ ui->recvTextEdit->insertPlainText(line);
+ ui->recvTextEdit->moveCursor(QTextCursor::End);
+
+ parseWstpPrintData(line);
+ }
+
+ // 检测设备信息数据（去掉[PPP_INFO]限制，支持多种格式）（大小写不敏感）
+ // 检测包含@sim:的数据（可能是IMEI数据和4G信号数据）
+ if (line.contains("@sim:") || processLine.contains("@sim:")) {
+ qDebug() << "检测到包含@sim:的数据:";
+ qDebug() << " 原始line:" << line.trimmed();
+ qDebug() << " processLine:" << processLine.trimmed();
+
+ // 优先处理processLine
+ QString dataToProcess = processLine.contains("@sim:") ? processLine : line;
+
+ // 提取IMEI（15位数字）
+ QRegExp imeiRegex("(\\d{15})");
+ if (imeiRegex.indexIn(dataToProcess) != -1) {
+ QString extractedImei = imeiRegex.cap(1);
+ qDebug() << "从@sim:数据中提取到IMEI:" << extractedImei;
+ // 验证IMEI格式
+ if (isValidIMEI(extractedImei)) {
+ ui->IMEIlineEdit->setText(extractedImei);
+ } else {
+ qDebug() << "从@sim:数据中提取的IMEI格式不正确:" << extractedImei;
+ ui->statusbar->showMessage("IMEI格式不正确: " + extractedImei, 3000);
+ }
+ } else {
+ qDebug() << "在@sim:数据中未找到15位数字";
+ ShowPppInfoIMEI(dataToProcess);
+ }
+
+ // 检查是否正在进行4G测试，如果是则解析signal和sim值进行判断
+ if (isProductionTestRunning && (currentTestStep == TEST_PPP_INIT || currentTestStep == TEST_PPP_SIGNAL)) {
+ checkSignalAndSimValues(dataToProcess);
+ }
+ }
+ // 检测传统格式的IMEI数据：IMEI:开头的格式
+ else if (line.indexOf("IMEI:", 0, Qt::CaseInsensitive) != -1 || processLine.indexOf("IMEI:", 0, Qt::CaseInsensitive) != -1) {
+ qDebug() << "接收到IMEI数据:" << line.trimmed();
+ qDebug() << "原始数据长度:" << line.length() << "内容:" << line.toUtf8().toHex();
+ if (processLine.indexOf("IMEI:", 0, Qt::CaseInsensitive) != -1) {
+ ShowPppInfoIMEI(processLine);
+ } else {
+ ShowPppInfoIMEI(line);
+ }
+ }
+ // 检测新格式的IMEI数据：imei:开头的格式
+ else if (line.indexOf("imei:", 0, Qt::CaseInsensitive) != -1 || processLine.indexOf("imei:", 0, Qt::CaseInsensitive) != -1) {
+ qDebug() << "接收到新格式IMEI数据:" << line.trimmed();
+ if (processLine.indexOf("imei:", 0, Qt::CaseInsensitive) != -1) {
+ ShowPppInfoIMEI(processLine);
+ } else {
+ ShowPppInfoIMEI(line);
+ }
+ }
+
+ if (line.indexOf("ICCID:", 0, Qt::CaseInsensitive) != -1) {
+ qDebug() << "接收到ICCID数据:" << line.trimmed();
+ ShowPppInfoICCID(line);
+ }
+
+ if (line.indexOf("Modem Version:", 0, Qt::CaseInsensitive) != -1) {
+ qDebug() << "接收到Modem Version数据:" << line.trimmed();
+ ShowPppInfoModemVer(line);
+ }
+ // 检测新格式的Modem Version数据：@modemVer:开头的格式
+ else if (line.indexOf("@modemVer:", 0, Qt::CaseInsensitive) != -1) {
+ qDebug() << "接收到新格式Modem Version数据:" << line.trimmed();
+ ShowPppInfoModemVer(line);
+ }
+ // 检测括号格式的Modem Version数据：modemver(...)格式
+ else if (line.indexOf("modemver(", 0, Qt::CaseInsensitive) != -1) {
+ qDebug() << "接收到括号格式Modem Version数据:" << line.trimmed();
+ ShowPppInfoModemVer(line);
+ }
+
+ if (line.indexOf("pyver:", 0, Qt::CaseInsensitive) != -1) {
+ qDebug() << "接收到pyver数据:" << line.trimmed();
+ ShowPppInfoPYVer(line);
+ }
+ // 检测新格式的Modem Version数据：@modemVer:开头的格式
+ else if (line.indexOf("@pyVer:", 0, Qt::CaseInsensitive) != -1) {
+ qDebug() << "接收到新格式接收到括号格式pyver数据数据:" << line.trimmed();
+ ShowPppInfoPYVer(line);
+ }
+ // 检测括号格式的Modem Version数据：modemver(...)格式
+ else if (line.indexOf("pyver(", 0, Qt::CaseInsensitive) != -1) {
+ qDebug() << "接收到括号格式pyver数据:" << line.trimmed();
+ ShowPppInfoPYVer(line);
+ }
+
+ // 检测MESSAGE_4G_NETWORK_STAT_CHANGED格式数据
+ if (line.contains("MESSAGE_4G_NETWORK_STAT_CHANGED")) {
+ qDebug() << "接收到MESSAGE_4G_NETWORK_STAT_CHANGED数据:" << line.trimmed();
+ parseNetworkStatChanged(line);
+ }
+
+ // 检测工厂模式进入确认（用于产测）
+ if (line.contains("fac:enter or exit facotry mode")) {
+ checkFactoryModeResult(line);
+ }
+
+ // 检测PPP初始化结果（用于产测）
+ if (line.contains("PPP environment initialized successfully") ||
+ line.contains("PPP init failed")) {
+ check4GInitResult(line);
+ }
+
+ // 检测4G信号质量结果（用于产测）
+ if (line.contains("Overall LTE Quality") || line.contains("LTE Signal Quality") ||
+ line.contains("RSRQ:") || line.contains("RSRP:") || line.contains("总体评级")) {
+ check4GSignalResult(line);
+ }
+
+ // 检测LCD测试结果（用于产测）
+ if (line.contains("LCD test")) {
+ checkLcdTestResult(line);
+ }
+
+ // 检测BuildVer启动完成（用于产测）（大小写不敏感）
+ if (line.contains("BuildVer", Qt::CaseInsensitive)) {
+ checkBuildVerResult(line);
+ }
+
+ // 检测按键测试结果（用于产测）
+ if (line.contains("fac:id")) {
+ checkKeyTestResult(line);
+ }
+
+ // 检测录音测试结果（用于产测）
+ if (line.contains("MEDIAAUDIORECORD") || line.contains("MEDIAMUSICPLAY") ||
+ line.contains("Start Audio Capturer SUCCESS")) {
+ qDebug() << "录音测试相关数据匹配:" << line.trimmed();
+ checkAudioTestResult(line);
+ }
+
+ // 检测电池测试结果（用于产测）
+ if (line.contains("GETPOWER") || line.contains("Battery") || line.contains("fac:voltage")) {
+ checkBatteryTestResult(line);
+ }
+
+ // 检测G-sensor测试结果（用于产测）
+ if (line.contains("gsensor") || line.contains("GSENSOR") || line.contains("fac:gsensor")) {
+ qDebug() << "检测到gsensor相关数据，调用checkGsensorTestResult:" << line.trimmed();
+ checkGsensorTestResult(line);
+ }
+
+ // 检测CAT1信号测试结果 - 只在CAT1测试期间且包含特定格式时处理
+ if (hasReceivedFirstSignal && isProductionTestRunning && line.contains("signal:")) {
+ // 根据MODEM类型过滤特定格式的数据
+ bool shouldProcess = false;
+ if (isEGModem()) {
+ // EG系列：只处理rx_buffer格式，跳过cmd格式
+ shouldProcess = line.contains("rx_buffer:") && !line.contains("cmd ") && !line.contains("bufferlen");
+ } else {
+ // N7系列：处理PPPSIGNALINFO相关格式
+ shouldProcess = line.contains("RSRP:") || line.contains("signal:");
+ }
+
+ if (shouldProcess) {
+ qDebug() << "检测到CAT1信号相关数据:" << line.trimmed();
+ checkCat1SignalResult(line);
+ } else {
+ qDebug() << "跳过CAT1信号数据（格式不匹配）:" << line.left(50) + "...";
+ }
+ }
+ }
+
+ // 限制缓存最大长度
+ if (recvBuffer.length() > 2000) {
+ recvBuffer.clear();
+ }
+}
+
+
+// 十六进制转换函数（预留，如需可启用）
+QByteArray MainWindow::hexStringToByteArray(const QString &hexString)
+{
+ QByteArray byteArray;
+ bool ok;
+ for (int i = 0; i < hexString.size(); i += 2) {
+ QString hex = hexString.mid(i, 2);
+ char c = hex.toUInt(&ok, 16) & 0xFF;
+ if (ok) byteArray.append(c);
+ }
+ return byteArray;
+}
+
+QString MainWindow::byteArrayToHexString(const QByteArray &byteArray)
+{
+ QString hexString;
+ for (char c : byteArray) {
+ hexString += QString("%1 ").arg((unsigned char)c, 2, 16, QChar('0')).toUpper();
+ }
+ return hexString;
+}
+
+// 产测主函数
+void MainWindow::on_ProductionTestButton_clicked()
+{
+ // 检查串口是否已打开
+ if (!serial->isOpen()) {
+ QMessageBox::warning(this, "警告", "请先打开串口连接");
+ return;
+ }
+
+ if (isProductionTestRunning) {
+ // 如果正在测试，则停止测试
+ lcdTestTimer->stop();
+ motorTestTimer->stop();
+ isProductionTestRunning = false;
+ currentTestStep = TEST_IDLE;
+ ui->statusbar->showMessage("产测已停止", 2000);
+
+ // 恢复产测按钮状态 - 变回蓝色并启用
+ ui->openButton_2->setStyleSheet("QPushButton { background-color: #4A90E2; color: white; padding: 5px 10px; border: none; border-radius: 3px; }");
+ ui->openButton_2->setEnabled(true);
+ qDebug() << "产测停止 - 按钮已恢复蓝色并启用";
+
+ return;
+ }
+
+ // 开始产测流程
+ isProductionTestRunning = true;
+ currentTestStep = TEST_LCD;
+ currentLcdColor = 1; // 从红色开始
+ initRetry4GCount = 0;
+
+ ui->statusbar->showMessage("开始产测流程...", 2000);
+ qDebug() << "开始产测流程";
+
+ // ui->ProductionTestButton->setText("停止产测");
+
+ // 开始LCD测试
+ performLcdTest();
+}
+
+// LCD测试函数
+void MainWindow::performLcdTest()
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_LCD) {
+ qDebug() << "LCD测试跳过 - 产测运行:" << isProductionTestRunning << "当前步骤:" << currentTestStep;
+ return;
+ }
+
+ // 第一次进入LCD测试时更新状态并发送进入LCD测试模式指令
+ if (currentLcdColor == 1) {
+ updateTestStatus("lcd", STATUS_TESTING);
+
+ // 发送进入LCD测试模式指令
+ serial->write("AT^LCDTEST=1\r\n");
+ qDebug() << "发送进入LCD测试模式指令: AT^LCDTEST=1";
+ ui->statusbar->showMessage("进入LCD测试模式，1秒后开始颜色测试...", 1000);
+
+ // 延迟1秒后开始颜色测试，确保设备完全进入LCD测试模式
+ QTimer::singleShot(1000, this, [this]() {
+ if (isProductionTestRunning && currentTestStep == TEST_LCD) {
+ qDebug() << "LCD测试模式初始化完成，开始颜色测试";
+ performLcdColorTest();
+ }
+ });
+ return;
+ }
+
+ // 直接执行颜色测试
+ performLcdColorTest();
+}
+
+// LCD颜色测试函数
+void MainWindow::performLcdColorTest()
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_LCD) {
+ qDebug() << "LCD颜色测试跳过 - 产测运行:" << isProductionTestRunning << "当前步骤:" << currentTestStep;
+ return;
+ }
+
+ qDebug() << "LCD测试 - 测试步骤:" << currentLcdColor << "定时器状态:" << lcdTestTimer->isActive();
+
+ // 在第一个颜色（红色）开始时就显示确认弹窗
+ if (currentLcdColor == 1 && !lcdTestPopupShown) {
+ qDebug() << "LCD测试开始，显示确认弹窗";
+ // 延迟一点显示弹窗，让红色先显示
+ QTimer::singleShot(500, this, [this]() {
+ if (isProductionTestRunning && currentTestStep == TEST_LCD && !lcdTestPopupShown) {
+ showLcdTestConfirmDialog();
+ }
+ });
+ }
+
+ QString colorName;
+ int colorCommand;
+ switch (currentLcdColor) {
+ case 1:
+ colorName = "红色";
+ colorCommand = 6; // AT^LCDTEST=6 红色
+ break;
+ case 2:
+ colorName = "绿色";
+ colorCommand = 3; // AT^LCDTEST=3 绿色
+ break;
+ case 3:
+ colorName = "蓝色";
+ colorCommand = 4; // AT^LCDTEST=4 蓝色
+ break;
+ default:
+ colorName = "未知";
+ colorCommand = 6;
+ break;
+ }
+
+ ui->statusbar->showMessage("LCD测试中 - " + colorName + " (1秒)", 1000);
+
+ // 发送LCD测试指令，使用正确的颜色映射
+ QString command = QString("AT^LCDTEST=%1\r\n").arg(colorCommand);
+ serial->write(command.toUtf8());
+ qDebug() << "发送LCD指令:" << command.trimmed() << "(" << colorName << ")";
+
+ // 设置1秒定时器
+ lcdTestTimer->start(1000);
+}
+
+// LCD测试定时器槽函数
+void MainWindow::onLcdTestTimer()
+{
+ lcdTestTimer->stop();
+ qDebug() << "LCD定时器触发，当前颜色:" << currentLcdColor;
+
+ if (!isProductionTestRunning) {
+ qDebug() << "产测未运行，退出定时器";
+ return;
+ }
+
+ currentLcdColor++;
+ qDebug() << "切换到下一个颜色:" << currentLcdColor;
+
+ if (currentLcdColor <= 3) {
+ // 继续下一个颜色测试
+ qDebug() << "继续下一个颜色测试";
+ performLcdColorTest();
+ } else {
+ // LCD测试完成，发送退出LCD测试指令
+ qDebug() << "LCD测试完成，退出LCD测试界面";
+ ui->statusbar->showMessage("LCD测试完成，退出测试界面", 1000);
+
+ // 发送退出LCD测试指令
+ serial->write("AT^LCDTEST=2\r\n");
+ qDebug() << "发送LCD退出指令: AT^LCDTEST=2";
+
+ // LCD颜色测试完成，检查用户是否已确认
+ if (!isWaitingForUserConfirm) {
+ // 用户已确认，可以继续马达测试
+ QTimer::singleShot(1000, this, [this]() {
+ if (isProductionTestRunning) {
+ qDebug() << "用户已确认LCD结果，开始马达测试";
+ currentTestStep = TEST_MOTOR;
+ performMotorTest();
+ }
+ });
+ } else {
+ // 用户还未确认，等待用户确认后再继续
+ qDebug() << "LCD颜色测试完成，等待用户确认结果";
+ ui->statusbar->showMessage("LCD测试完成，等待用户确认结果", 3000);
+ }
+ }
+}
+
+// 马达测试函数
+void MainWindow::performMotorTest()
+{
+ qDebug() << "performMotorTest() 被调用";
+ qDebug() << "产测运行状态:" << isProductionTestRunning;
+ qDebug() << "当前测试步骤:" << currentTestStep << "(TEST_MOTOR=" << TEST_MOTOR << ")";
+
+ if (!isProductionTestRunning || currentTestStep != TEST_MOTOR) {
+ qDebug() << "马达测试条件不满足，退出函数";
+ qDebug() << "isProductionTestRunning:" << isProductionTestRunning;
+ qDebug() << "currentTestStep:" << currentTestStep << "期望:" << TEST_MOTOR;
+ return;
+ }
+
+ qDebug() << "开始马达测试";
+
+ // 重置马达测试状态
+ motorTestPopupShown = false;
+
+ updateTestStatus("motor", STATUS_TESTING);
+ ui->statusbar->showMessage("马达测试中 - 开启2秒", 2000);
+
+ // 发送马达开启指令
+ serial->write("AT^VIBRATORTIMER=1\r\n");
+ qDebug() << "发送马达开启指令: AT^VIBRATORTIMER=1";
+
+ // 先停止可能正在运行的定时器
+ if (motorTestTimer->isActive()) {
+ motorTestTimer->stop();
+ qDebug() << "警告：马达定时器已在运行，先停止";
+ }
+
+ // 设置2秒定时器
+ qDebug() << "启动马达定时器，2秒后关闭马达";
+ motorTestTimer->start(2000);
+
+ // 启动10秒超时检测
+ testTimeoutTimer->start(10000);
+}
+
+// 马达测试定时器槽函数
+void MainWindow::onMotorTestTimer()
+{
+ motorTestTimer->stop();
+
+ if (!isProductionTestRunning) {
+ return;
+ }
+
+ qDebug() << "马达测试时间到，关闭马达";
+ ui->statusbar->showMessage("马达测试中 - 关闭", 1000);
+
+ // 发送马达关闭指令
+ serial->write("AT^VIBRATORTIMER=0\r\n");
+ qDebug() << "发送马达关闭指令: AT^VIBRATORTIMER=0";
+
+ // 马达测试完成，显示确认弹窗
+ qDebug() << "马达测试完成，显示确认弹窗";
+
+ // 如果弹窗还没有显示过，则显示确认弹窗
+ if (!motorTestPopupShown) {
+ showMotorTestConfirmDialog();
+ } else {
+ // 如果弹窗已经显示过，直接开始按键测试
+ qDebug() << "马达确认弹窗已显示过，开始按键测试";
+ currentTestStep = TEST_KEY;
+ performKeyTest();
+ }
+}
+
+// 4G测试函数
+void MainWindow::perform4GTest()
+{
+ if (!isProductionTestRunning) {
+ qDebug() << "4G测试跳过 - 产测未运行";
+ return;
+ }
+
+ initRetry4GCount++;
+ qDebug() << "4G测试 - 初始化尝试次数:" << initRetry4GCount;
+
+ // 第一次4G测试时更新状态并进行CAT1电源控制
+ if (initRetry4GCount == 1) {
+ updateTestStatus("ppp", STATUS_TESTING);
+
+ // 先发送AT^CAT1POWER=0关闭CAT1电源
+ serial->write("AT^CAT1POWER=0\r\n");
+ qDebug() << "发送CAT1电源关闭指令: AT^CAT1POWER=0";
+ ui->statusbar->showMessage("4G测试中 - 重置CAT1电源...", 2000);
+
+ // 延迟1秒后发送AT^CAT1POWER=1开启CAT1电源
+ QTimer::singleShot(1000, this, [this]() {
+ if (isProductionTestRunning && serial->isOpen()) {
+ serial->write("AT^CAT1POWER=1\r\n");
+ qDebug() << "发送CAT1电源开启指令: AT^CAT1POWER=1";
+ ui->statusbar->showMessage("4G测试中 - 启动CAT1电源...", 2000);
+
+ // 延迟1秒后发送AT^CAT1LOGLEVEL=4指令
+ QTimer::singleShot(1000, this, [this]() {
+ if (isProductionTestRunning && serial->isOpen()) {
+ serial->write("AT^CAT1LOGLEVEL=4\r\n");
+ qDebug() << "发送CAT1日志级别设置指令: AT^CAT1LOGLEVEL=4";
+ ui->statusbar->showMessage("4G测试中 - 设置CAT1日志级别...", 2000);
+
+ // 延迟1秒后发送AT^PPPSTOPDIAL指令
+ QTimer::singleShot(1000, this, [this]() {
+ if (isProductionTestRunning && serial->isOpen()) {
+ serial->write("AT^PPPSTOPDIAL\r\n");
+ qDebug() << "发送PPP停止拨号指令: AT^PPPSTOPDIAL";
+ ui->statusbar->showMessage("4G测试中 - 停止PPP拨号...", 3000);
+
+ // 延迟5秒后重置标志并开始4G信号检测
+ QTimer::singleShot(5000, this, [this]() {
+ if (isProductionTestRunning) {
+ // 重置标志
+ hasReceivedSignalSim = false;
+ hasReceivedPppInfo = true; // 标记为已收到，跳过PPP等待
+ pppCommandCount = 0;
+
+ // 直接开始4G信号质量检测
+ qDebug() << "PPPSTOPDIAL延时完成，直接开始4G信号质量检测";
+ currentTestStep = TEST_PPP_SIGNAL;
+ perform4GSignalTest();
+ }
+ });
+ }
+ });
+ }
+ });
+ }
+ });
+ return; // 第一次调用时直接返回，等待定时器执行后续步骤
+ }
+
+ // 非第一次调用，直接进行4G环境初始化（重试时）
+ ui->statusbar->showMessage(QString("4G测试中 - 初始化中...(%1/10)").arg(initRetry4GCount), 5000);
+
+ // 不再发送PPPENVINIT指令，直接启动定时器等待后续处理
+
+ // 启动5秒超时定时器，如果没收到回复就重试
+ test4GTimer->start(5000);
+ qDebug() << "启动4G测试超时定时器(5秒)";
+}
+
+// 检查4G初始化结果
+// 检查工厂模式进入结果
+void MainWindow::checkFactoryModeResult(const QString& data)
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_RESET) {
+ return;
+ }
+
+ qDebug() << "工厂模式确认收到数据:" << data.trimmed();
+
+ // 解析新格式：fac:enter or exit facotry mode :1 或 fac:enter or exit facotry mode :0
+ if (data.contains("fac:enter or exit facotry mode")) {
+ // 使用正则表达式提取cmd值
+ QRegExp factoryModePattern("fac:enter or exit facotry mode\\s*:\\s*(\\d+)");
+ if (factoryModePattern.indexIn(data) != -1) {
+ QString cmdStr = factoryModePattern.cap(1);
+ int cmd = cmdStr.toInt();
+
+ qDebug() << "解析到工厂模式命令:" << cmd << "(1=进入产测, 0=退出产测)";
+
+ if (cmd == 1) {
+ // cmd=1 表示成功进入产测模式
+ // 停止超时检测，因为已经收到确认
+ if (testTimeoutTimer->isActive()) {
+ testTimeoutTimer->stop();
+ qDebug() << "工厂模式进入确认收到，停止超时检测";
+ }
+
+ qDebug() << "工厂模式进入成功确认 (cmd=1)";
+ ui->statusbar->showMessage("工厂模式进入成功，准备重启设备...", 2000);
+
+ // 产测开始确认 - 按钮变绿色并禁用
+ ui->openButton_2->setStyleSheet("QPushButton { background-color: #28A745; color: white; padding: 5px 10px; border: none; border-radius: 3px; }");
+ ui->openButton_2->setEnabled(false);
+ qDebug() << "产测开始确认 - 按钮已变绿色并禁用";
+
+ // 延迟2秒后发送重启指令
+ QTimer::singleShot(2000, this, [this]() {
+ if (isProductionTestRunning && currentTestStep == TEST_RESET) {
+ ui->statusbar->showMessage("产测模式已开启 - 重启设备中...", 3000);
+ qDebug() << "工厂模式确认后发送设备重启指令";
+ serial->write("AT^RESET\r\n");
+ qDebug() << "发送设备重启指令: AT^RESET";
+
+ // 切换到等待BuildVer状态
+ currentTestStep = TEST_WAIT_BUILDVER;
+ qDebug() << "等待设备重启完成，寻找BuildVer标志...";
+ }
+ });
+
+ } else if (cmd == 0) {
+ // cmd=0 表示退出产测模式
+ qDebug() << "工厂模式退出确认 (cmd=0)";
+ ui->statusbar->showMessage("工厂模式已退出", 2000);
+
+ } else {
+ // 未知的cmd值
+ qDebug() << "未知的工厂模式命令值:" << cmd;
+ ui->statusbar->showMessage("收到未知的工厂模式命令", 2000);
+ }
+ } else {
+ // 无法解析cmd值，使用旧的逻辑作为备用
+ qDebug() << "无法解析工厂模式命令值，使用旧逻辑";
+
+ // 停止超时检测，因为已经收到确认
+ if (testTimeoutTimer->isActive()) {
+ testTimeoutTimer->stop();
+ qDebug() << "工厂模式确认收到，停止超时检测";
+ }
+
+ qDebug() << "工厂模式进入成功确认 (备用逻辑)";
+ ui->statusbar->showMessage("工厂模式进入成功，准备重启设备...", 2000);
+
+ // 延迟2秒后发送重启指令
+ QTimer::singleShot(2000, this, [this]() {
+ if (isProductionTestRunning && currentTestStep == TEST_RESET) {
+ ui->statusbar->showMessage("产测模式已开启 - 重启设备中...", 3000);
+ qDebug() << "工厂模式确认后发送设备重启指令";
+ serial->write("AT^RESET\r\n");
+ qDebug() << "发送设备重启指令: AT^RESET";
+
+ // 切换到等待BuildVer状态
+ currentTestStep = TEST_WAIT_BUILDVER;
+ qDebug() << "等待设备重启完成，寻找BuildVer标志...";
+ }
+ });
+ }
+ }
+}
+
+void MainWindow::check4GInitResult(const QString& data)
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_PPP_INIT) {
+ return;
+ }
+
+ // 收到回复，停止超时定时器
+ if (test4GTimer->isActive()) {
+ test4GTimer->stop();
+ qDebug() << "收到4G回复，停止超时定时器";
+ }
+
+ if (data.contains("PPP environment initialized successfully")) {
+ qDebug() << "4G初始化通过";
+ ui->statusbar->showMessage("4G初始化通过，发送运行时更新指令", 2000);
+
+ // 标记已收到PPPINFO相关打印
+ hasReceivedPppInfo = true;
+
+ // 4G初始化通过，发送运行时更新指令
+ currentTestStep = TEST_PPP_UPDATE;
+ serial->write("AT^PPPRUNTIMEUPDATE\r\n");
+ qDebug() << "发送4G运行时更新指令: AT^PPPRUNTIMEUPDATE";
+
+ // 延迟2秒后开始4G信号质量检测
+ QTimer::singleShot(2000, this, [this]() {
+ if (isProductionTestRunning) {
+ qDebug() << "开始4G信号质量检测";
+ currentTestStep = TEST_PPP_SIGNAL;
+ perform4GSignalTest();
+ }
+ });
+ // ui->ProductionTestButton->setText("开始产测");
+
+ } else if (data.contains("PPP init failed")) {
+ qDebug() << "4G初始化失败，重试中...";
+ ui->statusbar->showMessage("4G初始化失败，重试中...", 2000);
+
+ // 如果重试次数过多，可以设置上限
+ if (initRetry4GCount >= 10) {
+ qDebug() << "4G初始化重试次数过多，停止测试";
+ ui->statusbar->showMessage("4G初始化失败次数过多，测试停止", 5000);
+ updateTestStatus("ppp", STATUS_FAILED);
+ isProductionTestRunning = false;
+ currentTestStep = TEST_IDLE;
+
+ // 保存测试记录到Excel（失败记录）
+ QString fileName = saveTestRecord();
+
+ // 显示最终测试结果弹窗
+ showFinalTestResult();
+ // ui->ProductionTestButton->setText("开始产测");
+ return;
+ }
+
+ // 先发送停止指令，然后延迟重试
+ qDebug() << "4G失败重试前发送停止指令";
+ serial->write("AT^VIBRATORTIMER=0\r\n"); // 停止马达
+ serial->write("AT^LCDTEST=2\r\n"); // 退出LCD测试
+
+ QTimer::singleShot(1000, this, [this]() {
+ qDebug() << "停止指令已发送，开始4G失败重试";
+ perform4GTest();
+ });
+ }
+}
+
+// 4G测试超时处理
+void MainWindow::on4GTestTimeout()
+{
+ test4GTimer->stop();
+
+ if (!isProductionTestRunning || currentTestStep != TEST_PPP_INIT) {
+ qDebug() << "4G超时但测试状态已改变，忽略";
+ return;
+ }
+
+ // 检查当前是在等待PPP回复还是等待signal和sim数据
+ if (pppCommandCount <= 3) {
+ // 前3次，等待PPP数据超时
+ if (hasReceivedPppInfo) {
+ qDebug() << "PPP数据等待超时，但已收到PPPINFO，继续正常流程";
+ return;
+ }
+
+ qDebug() << "PPP数据第" << pppCommandCount << "次等待超时，准备重试";
+
+ // 重新等待PPP数据
+ QTimer::singleShot(1000, this, [this]() {
+ if (isProductionTestRunning) {
+ sendPppCommand();
+ }
+ });
+ return;
+ } else {
+ // 超过3次后，等待signal和sim数据超时
+ if (hasReceivedSignalSim) {
+ qDebug() << "4G测试超时，但已收到signal和sim数据，测试已完成";
+ return; // 已经在checkSignalAndSimValues中处理了结果
+ }
+
+ qDebug() << "4G测试超时，5秒内未收到signal和sim数据，判断为失败";
+ ui->statusbar->showMessage("4G测试失败 - 5秒内未收到signal和sim数据", 3000);
+ }
+
+ // 直接判断为失败，不再重试
+ updateTestStatus("ppp", STATUS_FAILED);
+ isProductionTestRunning = false;
+ currentTestStep = TEST_COMPLETED;
+
+ // 保存测试记录
+ QString fileName = saveTestRecord();
+
+ // 显示最终测试结果弹窗
+ showFinalTestResult();
+ return;
+
+ // 检查重试次数（这部分代码现在不会执行到）
+ if (initRetry4GCount >= 10) {
+ qDebug() << "4G初始化重试次数过多，停止测试";
+ ui->statusbar->showMessage("4G初始化失败次数过多，测试停止", 5000);
+ updateTestStatus("ppp", STATUS_FAILED);
+ isProductionTestRunning = false;
+ currentTestStep = TEST_IDLE;
+
+ // 保存测试记录到Excel（失败记录）
+ QString fileName = saveTestRecord();
+
+ // 显示最终测试结果弹窗
+ showFinalTestResult();
+ return;
+ }
+
+ // 先发送停止指令，然后延迟重试
+ qDebug() << "PPP重试前发送停止指令";
+ serial->write("AT^VIBRATORTIMER=0\r\n"); // 停止马达
+ // serial->write("AT^LCDTEST=2\r\n"); // 退出LCD测试 - 已屏蔽
+
+ QTimer::singleShot(1000, this, [this]() {
+ if (isProductionTestRunning && currentTestStep == TEST_PPP_INIT) {
+ qDebug() << "停止指令已发送，开始PPP重试";
+ perform4GTest();
+ }
+ });
+}
+
+// 检查LCD测试结果
+void MainWindow::checkLcdTestResult(const QString& data)
+{
+ // 检测LCD测试回复信息，并且只在LCD测试阶段且未显示过弹窗时弹出
+ // 修改：在最后一个颜色（蓝色）显示时才弹窗，让用户观察完整过程
+ if (data.contains("LCD test") && currentTestStep == TEST_LCD &&
+ !lcdTestPopupShown && isProductionTestRunning && currentLcdColor >= 3) {
+
+ qDebug() << "检测到LCD测试回复:" << data.trimmed();
+ qDebug() << "准备显示LCD测试确认弹窗";
+
+ // 标记弹窗已显示，避免重复弹出
+ lcdTestPopupShown = true;
+ isWaitingForUserConfirm = true;
+
+ // 注意：不暂停LCD定时器，让颜色切换继续进行
+ // LCD颜色切换应该独立于用户确认过程
+ qDebug() << "显示LCD确认弹窗，但颜色切换继续进行";
+
+ // LCD测试回复已检测到，弹窗处理由performLcdTest中的定时器处理
+
+ // 不需要在这里处理弹窗，由performLcdTest中的定时器处理
+ }
+}
+
+// 显示LCD测试确认弹窗
+void MainWindow::showLcdTestConfirmDialog()
+{
+ if (lcdTestPopupShown) {
+ qDebug() << "LCD确认弹窗已显示过，跳过";
+ return;
+ }
+
+ qDebug() << "显示LCD测试确认弹窗";
+
+ // 标记弹窗已显示，避免重复弹出
+ lcdTestPopupShown = true;
+ isWaitingForUserConfirm = true;
+
+ // 弹出确认对话框让测试人员确认LCD显示是否正常
+ QMessageBox msgBox(this);
+ msgBox.setWindowTitle("LCD测试确认");
+ msgBox.setText("LCD测试正在进行，请观察LCD是否正常显示红、绿、蓝色切换");
+ msgBox.setInformativeText("观察完成后请选择LCD显示结果：");
+ msgBox.setIcon(QMessageBox::Question);
+
+ // 设置弹窗尺寸更大
+ msgBox.resize(400, 200);
+
+ // 添加自定义按钮
+ QPushButton *successButton = msgBox.addButton("✓ 测试通过", QMessageBox::AcceptRole);
+ QPushButton *failButton = msgBox.addButton("✗ 测试失败", QMessageBox::RejectRole);
+ QPushButton *retestButton = msgBox.addButton("🔄 重新测试", QMessageBox::ResetRole);
+
+ // 设置按钮样式
+ successButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #4CAF50; " // 绿色背景
+ "color: white; " // 白色文字
+ "padding: 12px 20px; " // 增大内边距
+ "border-radius: 4px; " // 圆角
+ "font-weight: bold; " // 粗体
+ "font-size: 16px; " // 增大字体
+ "}"
+ "QPushButton:hover { "
+ "background-color: #45a049; " // hover时加深颜色
+ "}"
+ );
+
+ failButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #f44336; " // 红色背景
+ "color: white; " // 白色文字
+ "padding: 12px 20px; " // 增大内边距
+ "border-radius: 4px; " // 圆角
+ "font-weight: bold; " // 粗体
+ "font-size: 16px; " // 增大字体
+ "}"
+ "QPushButton:hover { "
+ "background-color: #da190b; " // hover时加深颜色
+ "}"
+ );
+
+ retestButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #FF9800; " // 橙色背景
+ "color: white; " // 白色文字
+ "padding: 12px 20px; " // 增大内边距
+ "border-radius: 4px; " // 圆角
+ "font-weight: bold; " // 粗体
+ "font-size: 16px; " // 增大字体
+ "}"
+ "QPushButton:hover { "
+ "background-color: #F57C00; " // hover时加深颜色
+ "}"
+ );
+
+ // 显示对话框并等待用户选择
+ msgBox.exec();
+
+ // 用户已做出选择，取消等待状态
+ isWaitingForUserConfirm = false;
+
+ // 根据用户选择处理结果
+ if (msgBox.clickedButton() == successButton) {
+ // 测试人员确认LCD显示正常
+ qDebug() << "测试人员确认：LCD显示正常";
+ ui->statusbar->showMessage("LCD显示正常", 2000);
+ updateTestStatus("lcd", STATUS_SUCCESS);
+
+ // 发送停止LCD测试指令
+ serial->write("AT^LCDTEST=2\r\n");
+ qDebug() << "LCD测试通过，发送停止LCD测试指令: AT^LCDTEST=2";
+
+ // 停止LCD定时器，防止继续切换颜色和重复调用马达测试
+ if (lcdTestTimer->isActive()) {
+ lcdTestTimer->stop();
+ qDebug() << "停止LCD定时器，防止继续切换颜色和重复调用马达测试";
+ }
+
+ // 直接启动马达测试
+ if (isProductionTestRunning) {
+ qDebug() << "LCD测试通过确认，直接启动马达测试";
+ qDebug() << "当前产测状态:" << isProductionTestRunning << "当前测试步骤:" << currentTestStep;
+ currentTestStep = TEST_MOTOR;
+ qDebug() << "设置测试步骤为TEST_MOTOR，准备调用performMotorTest()";
+
+ // 延迟一点启动马达测试，确保LCD定时器完全停止
+ QTimer::singleShot(100, this, [this]() {
+ if (isProductionTestRunning && currentTestStep == TEST_MOTOR) {
+ performMotorTest();
+ }
+ });
+ } else {
+ qDebug() << "产测未运行，无法启动马达测试";
+ }
+
+ } else if (msgBox.clickedButton() == failButton) {
+ // 测试人员确认LCD显示异常
+ qDebug() << "测试人员确认：LCD显示异常";
+ ui->statusbar->showMessage("LCD显示异常！", 2000);
+ updateTestStatus("lcd", STATUS_FAILED);
+
+ // 发送停止LCD测试指令
+ serial->write("AT^LCDTEST=2\r\n");
+ qDebug() << "LCD测试失败，发送停止LCD测试指令: AT^LCDTEST=2";
+
+ // 停止LCD定时器，防止重复调用马达测试
+ if (lcdTestTimer->isActive()) {
+ lcdTestTimer->stop();
+ qDebug() << "停止LCD定时器，防止重复调用马达测试";
+ }
+
+ // 即使失败也继续马达测试
+ if (isProductionTestRunning) {
+ qDebug() << "LCD测试失败确认，继续马达测试";
+ qDebug() << "当前产测状态:" << isProductionTestRunning << "当前测试步骤:" << currentTestStep;
+ currentTestStep = TEST_MOTOR;
+ qDebug() << "设置测试步骤为TEST_MOTOR，准备调用performMotorTest()";
+
+ // 延迟一点启动马达测试，确保LCD定时器完全停止
+ QTimer::singleShot(100, this, [this]() {
+ if (isProductionTestRunning && currentTestStep == TEST_MOTOR) {
+ performMotorTest();
+ }
+ });
+ } else {
+ qDebug() << "产测未运行，无法启动马达测试";
+ }
+
+ } else if (msgBox.clickedButton() == retestButton) {
+ // 重新测试LCD
+ qDebug() << "用户选择重新测试LCD";
+ ui->statusbar->showMessage("重新开始LCD测试", 2000);
+
+ // 重置LCD测试状态
+ lcdTestPopupShown = false;
+ isWaitingForUserConfirm = false;
+ currentLcdColor = 1; // 设置为1，从红色开始重新测试
+
+ // 重新开始LCD测试
+ currentTestStep = TEST_LCD;
+ performLcdTest();
+ return; // 直接返回，不继续后续流程
+ }
+
+ // 用户确认完成，马达测试已在上面的按钮处理中启动
+ qDebug() << "用户确认完成，马达测试已启动";
+}
+
+// 显示马达测试确认弹窗
+void MainWindow::showMotorTestConfirmDialog()
+{
+ if (motorTestPopupShown) {
+ qDebug() << "马达确认弹窗已显示过，跳过";
+ return;
+ }
+
+ qDebug() << "显示马达测试确认弹窗";
+
+ // 标记弹窗已显示，避免重复弹出
+ motorTestPopupShown = true;
+ isWaitingForUserConfirm = true;
+
+ // 停止超时检测，因为马达测试已完成
+ if (testTimeoutTimer->isActive()) {
+ testTimeoutTimer->stop();
+ qDebug() << "马达测试完成，停止超时检测";
+ }
+
+ // 弹出确认对话框让测试人员确认马达是否震动
+ QMessageBox msgBox(this);
+ msgBox.setWindowTitle("马达测试确认");
+ msgBox.setText("马达测试已完成，请测试人员确认马达是否正常震动。");
+ msgBox.setInformativeText("请选择马达测试结果：");
+ msgBox.setIcon(QMessageBox::Question);
+
+ // 设置弹窗尺寸更大
+ msgBox.resize(400, 200);
+
+ // 添加自定义按钮
+ QPushButton *successButton = msgBox.addButton("✓ 测试通过", QMessageBox::AcceptRole);
+ QPushButton *failButton = msgBox.addButton("✗ 测试失败", QMessageBox::RejectRole);
+ QPushButton *retestButton = msgBox.addButton("🔄 重新测试", QMessageBox::ResetRole);
+
+ // 设置按钮样式
+ successButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #4CAF50; " // 绿色背景
+ "color: white; " // 白色文字
+ "padding: 12px 20px; " // 增大内边距
+ "border-radius: 4px; " // 圆角
+ "font-weight: bold; " // 粗体
+ "font-size: 16px; " // 增大字体
+ "}"
+ "QPushButton:hover { "
+ "background-color: #45a049; " // hover时加深颜色
+ "}"
+ );
+
+ failButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #f44336; " // 红色背景
+ "color: white; " // 白色文字
+ "padding: 12px 20px; " // 增大内边距
+ "border-radius: 4px; " // 圆角
+ "font-weight: bold; " // 粗体
+ "font-size: 16px; " // 增大字体
+ "}"
+ "QPushButton:hover { "
+ "background-color: #da190b; " // hover时加深颜色
+ "}"
+ );
+
+ retestButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #FF9800; " // 橙色背景
+ "color: white; " // 白色文字
+ "padding: 12px 20px; " // 增大内边距
+ "border-radius: 4px; " // 圆角
+ "font-weight: bold; " // 粗体
+ "font-size: 16px; " // 增大字体
+ "}"
+ "QPushButton:hover { "
+ "background-color: #F57C00; " // hover时加深颜色
+ "}"
+ );
+
+ // 显示对话框并等待用户选择
+ msgBox.exec();
+
+ // 用户已做出选择，取消等待状态
+ isWaitingForUserConfirm = false;
+
+ // 根据用户选择处理结果
+ if (msgBox.clickedButton() == successButton) {
+ // 测试人员确认马达震动正常
+ qDebug() << "测试人员确认：马达震动正常";
+ ui->statusbar->showMessage("马达测试通过 - 震动正常！", 3000);
+ updateTestStatus("motor", STATUS_SUCCESS);
+
+ } else if (msgBox.clickedButton() == failButton) {
+ // 测试人员确认马达震动异常
+ qDebug() << "测试人员确认：马达震动异常";
+ ui->statusbar->showMessage("马达测试失败 - 震动异常！", 3000);
+ updateTestStatus("motor", STATUS_FAILED);
+
+ } else if (msgBox.clickedButton() == retestButton) {
+ // 重新测试马达
+ qDebug() << "用户选择重新测试马达";
+ ui->statusbar->showMessage("停止马达震动，准备重新测试...", 2000);
+
+ // 先发送停止马达震动指令
+ serial->write("AT^VIBRATORTIMER=0\r\n");
+ qDebug() << "发送停止马达指令: AT^VIBRATORTIMER=0";
+
+ // 重置马达测试状态
+ motorTestPopupShown = false;
+ isWaitingForUserConfirm = false;
+
+ // 延迟1秒后重新开始马达测试
+ QTimer::singleShot(1000, this, [this]() {
+ if (!isProductionTestRunning) return; // 确保产测还在运行
+
+ qDebug() << "1秒延迟后开始重新测试马达";
+ ui->statusbar->showMessage("重新开始马达测试", 2000);
+ currentTestStep = TEST_MOTOR;
+ performMotorTest();
+ });
+ return; // 直接返回，不继续后续流程
+ }
+
+ // 用户确认完成，马达测试结束，开始按键测试
+ if (isProductionTestRunning && currentTestStep == TEST_MOTOR) {
+ qDebug() << "马达测试确认完成，开始按键测试";
+ currentTestStep = TEST_KEY;
+ performKeyTest();
+ }
+}
+
+// 执行按键测试
+void MainWindow::performKeyTest()
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_KEY) {
+ return;
+ }
+
+ qDebug() << "开始按键测试";
+ updateTestStatus("key", STATUS_TESTING);
+ ui->statusbar->showMessage("按键测试中，请按下设备上的按键", 10000);
+
+ // 重置按键测试状态
+ keyTestStarted = true;
+ for (int i = 0; i < 4; i++) {
+ keyTestStatus[i] = 0;
+ }
+
+ // 创建按键测试弹窗
+ keyTestDialog = new QDialog(this);
+ keyTestDialog->setWindowTitle("按键测试");
+ keyTestDialog->setFixedSize(450, 280); // 调大尺寸
+ keyTestDialog->setModal(true);
+
+ // 设置布局
+ QVBoxLayout *layout = new QVBoxLayout(keyTestDialog);
+ QLabel *instructionLabel = new QLabel("请按下设备上的按键，按钮会变色表示检测到");
+ layout->addWidget(instructionLabel);
+
+ // 创建按键按钮网格
+ QGridLayout *gridLayout = new QGridLayout();
+
+ // 创建4个按键按钮
+ for (int i = 0; i < 4; i++) {
+ keyButtons[i] = new QPushButton(QString("按键 %1").arg(i));
+ keyButtons[i]->setFixedSize(60, 40);
+ keyButtons[i]->setStyleSheet(
+ "QPushButton { "
+ "background-color: #f0f0f0; "
+ "border: 2px solid #888888; "
+ "border-radius: 5px; "
+ "font-weight: bold; "
+ "}"
+ );
+
+ // 将按钮添加到网格布局（2x2）
+ gridLayout->addWidget(keyButtons[i], i / 2, i % 2);
+ }
+
+ layout->addLayout(gridLayout);
+
+ // 添加测试结果按钮
+ QHBoxLayout *buttonLayout = new QHBoxLayout();
+
+ QPushButton *passButton = new QPushButton("✓ 测试通过");
+ passButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #4CAF50; "
+ "color: white; "
+ "padding: 12px 20px; "
+ "border-radius: 4px; "
+ "font-weight: bold; "
+ "font-size: 16px; "
+ "}"
+ );
+
+ QPushButton *failButton = new QPushButton("✗ 测试失败");
+ failButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #f44336; "
+ "color: white; "
+ "padding: 12px 20px; "
+ "border-radius: 4px; "
+ "font-weight: bold; "
+ "font-size: 16px; "
+ "}"
+ );
+
+ QPushButton *retestButton = new QPushButton("🔄 重新测试");
+ retestButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #FF9800; "
+ "color: white; "
+ "padding: 12px 20px; "
+ "border-radius: 4px; "
+ "font-weight: bold; "
+ "font-size: 16px; "
+ "}"
+ );
+
+ buttonLayout->addWidget(passButton);
+ buttonLayout->addWidget(failButton);
+ buttonLayout->addWidget(retestButton);
+
+ // 连接按钮事件
+ connect(passButton, &QPushButton::clicked, [this]() {
+ if (keyTestDialog && isProductionTestRunning && currentTestStep == TEST_KEY) {
+ keyTestDialog->accept();
+ qDebug() << "用户选择：按键测试通过";
+ ui->statusbar->showMessage("按键测试通过", 2000);
+ updateTestStatus("key", STATUS_SUCCESS);
+
+ // 继续录音测试
+ qDebug() << "=== 按键测试完成，开始录音测试 ===";
+ keyTestStarted = false;
+ currentTestStep = TEST_AUDIO;
+ qDebug() << "设置currentTestStep为TEST_AUDIO:" << TEST_AUDIO;
+ performAudioTest();
+ }
+ });
+
+ connect(failButton, &QPushButton::clicked, [this]() {
+ if (keyTestDialog && isProductionTestRunning && currentTestStep == TEST_KEY) {
+ keyTestDialog->accept();
+ qDebug() << "用户选择：按键测试失败";
+ ui->statusbar->showMessage("按键测试失败", 2000);
+ updateTestStatus("key", STATUS_FAILED);
+
+ // 继续录音测试
+ keyTestStarted = false;
+ currentTestStep = TEST_AUDIO;
+ performAudioTest();
+ }
+ });
+
+ connect(retestButton, &QPushButton::clicked, [this]() {
+ if (keyTestDialog) {
+ keyTestDialog->accept();
+ qDebug() << "用户选择：重新测试按键";
+ ui->statusbar->showMessage("重新开始按键测试", 2000);
+
+ // 重置按键测试状态
+ keyTestStarted = false;
+
+ // 重新开始按键测试
+ currentTestStep = TEST_KEY;
+ performKeyTest();
+ }
+ });
+
+ layout->addLayout(buttonLayout);
+
+ // 显示弹窗
+ keyTestDialog->show();
+}
+
+// 检查按键测试结果
+void MainWindow::checkKeyTestResult(const QString& data)
+{
+ if (!keyTestStarted || !keyTestDialog) {
+ return;
+ }
+
+ // 检测按键ID打印格式: "fac:id : X"
+ QRegExp keyPattern("fac:id\\s*:\\s*(\\d+)");
+ if (keyPattern.indexIn(data) != -1) {
+ int keyId = keyPattern.cap(1).toInt();
+
+ if (keyId >= 0 && keyId <= 3) {
+ qDebug() << "检测到按键按下: ID =" << keyId;
+
+ // 标记该按键已测试
+ keyTestStatus[keyId] = 1;
+
+ // 更新按钮颜色
+ if (keyButtons[keyId]) {
+ keyButtons[keyId]->setStyleSheet(
+ "QPushButton { "
+ "background-color: #4CAF50; " // 绿色表示已测试
+ "color: white; "
+ "border: 2px solid #45a049; "
+ "border-radius: 5px; "
+ "font-weight: bold; "
+ "}"
+ );
+ keyButtons[keyId]->setText(QString("按键 %1 ✓").arg(keyId));
+ }
+
+ ui->statusbar->showMessage(QString("检测到按键 %1").arg(keyId), 1000);
+
+ // 检查是否所有按键都已测试
+ bool allKeysTested = true;
+ for (int i = 0; i < 4; i++) {
+ if (keyTestStatus[i] == 0) {
+ allKeysTested = false;
+ break;
+ }
+ }
+
+ if (allKeysTested) {
+ qDebug() << "所有按键都已检测到，自动通过按键测试";
+ ui->statusbar->showMessage("所有按键检测完成，自动通过测试", 2000);
+
+ // 延迟1秒后自动关闭弹窗并标记为通过
+ QTimer::singleShot(1000, [this]() {
+ if (keyTestDialog && isProductionTestRunning && currentTestStep == TEST_KEY) {
+ keyTestDialog->accept();
+ qDebug() << "按键测试自动通过";
+ updateTestStatus("key", STATUS_SUCCESS);
+
+ // 继续录音测试
+ qDebug() << "=== 按键测试自动完成，开始录音测试 ===";
+ keyTestStarted = false;
+ currentTestStep = TEST_AUDIO;
+ qDebug() << "设置currentTestStep为TEST_AUDIO(自动):" << TEST_AUDIO;
+ performAudioTest();
+ }
+ });
+ } else {
+ qDebug() << "按键 " << keyId << " 检测完成，等待其他按键或用户选择";
+ }
+ }
+ }
+}
+
+// 显示按键测试确认对话框
+void MainWindow::showKeyTestConfirmDialog(bool allKeysTested)
+{
+ qDebug() << "显示按键测试确认弹窗，所有按键已测试:" << allKeysTested;
+
+ // 弹出确认对话框让测试人员确认按键测试结果
+ QMessageBox msgBox(this);
+ msgBox.setWindowTitle("按键测试确认");
+
+ if (allKeysTested) {
+ msgBox.setText("所有按键测试完成，请确认按键功能是否正常");
+ msgBox.setInformativeText("所有4个按键都已检测到按下，请选择按键测试结果：");
+ } else {
+ msgBox.setText("按键测试未完全完成");
+ msgBox.setInformativeText("部分按键未检测到按下，请选择按键测试结果：");
+ }
+
+ msgBox.setIcon(QMessageBox::Question);
+
+ // 添加自定义按钮
+ QPushButton *successButton = msgBox.addButton("✓ 测试通过", QMessageBox::AcceptRole);
+ QPushButton *failButton = msgBox.addButton("✗ 测试失败", QMessageBox::RejectRole);
+
+ // 设置按钮样式
+ successButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #4CAF50; " // 绿色背景
+ "color: white; " // 白色文字
+ "padding: 12px 20px; " // 增大内边距
+ "border-radius: 4px; " // 圆角
+ "font-weight: bold; " // 粗体
+ "font-size: 16px; " // 增大字体
+ "}"
+ "QPushButton:hover { "
+ "background-color: #45a049; " // hover时加深颜色
+ "}"
+ );
+
+ failButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #f44336; " // 红色背景
+ "color: white; " // 白色文字
+ "padding: 12px 20px; " // 增大内边距
+ "border-radius: 4px; " // 圆角
+ "font-weight: bold; " // 粗体
+ "font-size: 16px; " // 增大字体
+ "}"
+ "QPushButton:hover { "
+ "background-color: #da190b; " // hover时加深颜色
+ "}"
+ );
+
+ // 显示对话框并等待用户选择
+ msgBox.exec();
+
+ // 根据用户选择处理结果
+ if (msgBox.clickedButton() == successButton) {
+ // 测试人员确认按键正常
+ qDebug() << "测试人员确认：按键测试通过";
+ ui->statusbar->showMessage("按键测试通过", 2000);
+ updateTestStatus("key", STATUS_SUCCESS);
+
+ } else if (msgBox.clickedButton() == failButton) {
+ // 测试人员确认按键异常
+ qDebug() << "测试人员确认：按键测试失败";
+ ui->statusbar->showMessage("按键测试失败", 2000);
+ updateTestStatus("key", STATUS_FAILED);
+ }
+
+ // 按键测试完成，开始录音测试
+ if (isProductionTestRunning) {
+ keyTestStarted = false;
+ currentTestStep = TEST_AUDIO;
+ performAudioTest();
+ }
+}
+
+// 检查BuildVer启动完成
+void MainWindow::checkBuildVerResult(const QString& data)
+{
+ // 检测设备启动完成标志，只在等待BuildVer阶段检测（大小写不敏感）
+ if (data.contains("BuildVer", Qt::CaseInsensitive) && currentTestStep == TEST_WAIT_BUILDVER &&
+ isProductionTestRunning) {
+
+ qDebug() << "检测到BuildVer启动完成标志:" << data.trimmed();
+ qDebug() << "设备重启完成，发送AT^PMADDVOTE指令";
+
+ ui->statusbar->showMessage("设备重启完成，发送初始化指令...", 2000);
+
+ // 发送第一次AT^PMADDVOTE指令
+ serial->write("AT^PMADDVOTE\r\n");
+ qDebug() << "发送AT^PMADDVOTE指令(第1次): AT^PMADDVOTE";
+
+ // 延迟0.5秒后发送第二次AT^PMADDVOTE指令
+ QTimer::singleShot(500, this, [this]() {
+ if (isProductionTestRunning && serial->isOpen()) {
+ serial->write("AT^PMADDVOTE\r\n");
+ qDebug() << "发送AT^PMADDVOTE指令(第2次): AT^PMADDVOTE";
+
+ // 再延迟1秒后切换到LCD测试阶段
+ QTimer::singleShot(1000, this, [this]() {
+ if (isProductionTestRunning) {
+ qDebug() << "AT^PMADDVOTE指令发送完成，开始LCD测试";
+ ui->statusbar->showMessage("初始化完成，开始LCD测试", 2000);
+
+ // 切换到LCD测试阶段
+ currentTestStep = TEST_LCD;
+
+ // 延迟1秒后开始LCD测试
+ QTimer::singleShot(1000, this, [this]() {
+ if (isProductionTestRunning && currentTestStep == TEST_LCD) {
+ qDebug() << "开始LCD测试流程";
+ performLcdTest();
+ }
+ });
+ }
+ });
+ }
+ });
+ }
+}
+
+// 更新测试状态指示器
+void MainWindow::updateTestStatus(const QString& testName, TestStatus status)
+{
+ QString iconText, statusText, iconColor, textColor;
+
+ switch (status) {
+ case STATUS_UNTESTED:
+ iconText = "○";
+ statusText = "未测试";
+ iconColor = "#888888";
+ textColor = "#888888";
+ break;
+ case STATUS_TESTING:
+ iconText = "●";
+ statusText = "测试中";
+ iconColor = "#FFA500"; // 橙色
+ textColor = "#FFA500";
+ break;
+ case STATUS_SUCCESS:
+ iconText = "✓";
+ statusText = "通过";
+ iconColor = "#4CAF50"; // 绿色
+ textColor = "#4CAF50";
+ break;
+ case STATUS_FAILED:
+ iconText = "✗";
+ statusText = "失败";
+ iconColor = "#F44336"; // 红色
+ textColor = "#F44336";
+ break;
+ }
+
+ QString iconStyle = QString("color: %1; font-size: 18px; font-weight: bold;").arg(iconColor);
+ QString textStyle = QString("color: %1;").arg(textColor);
+
+ if (testName == "lcd") {
+ ui->lcdStatusIcon->setText(iconText);
+ ui->lcdStatusIcon->setStyleSheet(iconStyle);
+ ui->lcdStatusText->setText(statusText);
+ ui->lcdStatusText->setStyleSheet(textStyle);
+ } else if (testName == "motor") {
+ ui->motorStatusIcon->setText(iconText);
+ ui->motorStatusIcon->setStyleSheet(iconStyle);
+ ui->motorStatusText->setText(statusText);
+ ui->motorStatusText->setStyleSheet(textStyle);
+ } else if (testName == "key") {
+ ui->keyStatusIcon->setText(iconText);
+ ui->keyStatusIcon->setStyleSheet(iconStyle);
+ ui->keyStatusText->setText(statusText);
+ ui->keyStatusText->setStyleSheet(textStyle);
+ } else if (testName == "audio") {
+ ui->audioStatusIcon->setText(iconText);
+ ui->audioStatusIcon->setStyleSheet(iconStyle);
+ ui->audioStatusText->setText(statusText);
+ ui->audioStatusText->setStyleSheet(textStyle);
+ } else if (testName == "battery") {
+ ui->batteryStatusIcon->setText(iconText);
+ ui->batteryStatusIcon->setStyleSheet(iconStyle);
+ ui->batteryStatusText->setText(statusText);
+ ui->batteryStatusText->setStyleSheet(textStyle);
+ } else if (testName == "gsensor") {
+ ui->gsensorStatusIcon->setText(iconText);
+ ui->gsensorStatusIcon->setStyleSheet(iconStyle);
+ ui->gsensorStatusText->setText(statusText);
+ ui->gsensorStatusText->setStyleSheet(textStyle);
+ } else if (testName == "ppp") {
+ ui->pppStatusIcon->setText(iconText);
+ ui->pppStatusIcon->setStyleSheet(iconStyle);
+ ui->pppStatusText->setText(statusText);
+ ui->pppStatusText->setStyleSheet(textStyle);
+ }
+
+ // 更新整体状态
+ updateOverallStatus();
+}
+
+// 更新整体状态
+void MainWindow::updateOverallStatus()
+{
+ // 检查各项测试状态（只检查成功状态，简化逻辑）
+ bool lcdSuccess = ui->lcdStatusText->text() == "通过";
+ bool motorSuccess = ui->motorStatusText->text() == "通过";
+ bool keySuccess = ui->keyStatusText->text() == "通过";
+ bool audioSuccess = ui->audioStatusText->text() == "通过";
+ bool batterySuccess = ui->batteryStatusText->text() == "通过";
+ bool gsensorSuccess = ui->gsensorStatusText->text() == "通过";
+ bool pppSuccess = ui->pppStatusText->text() == "通过";
+
+ QString overallIcon, overallText, overallColor;
+
+ if (lcdSuccess && motorSuccess && keySuccess && audioSuccess && batterySuccess && gsensorSuccess && pppSuccess) {
+ // 所有测试都通过
+ overallIcon = "✓";
+ overallText = "通过";
+ overallColor = "#4CAF50";
+ } else {
+ // 任何其他情况（失败、测试中、等待开始等）都显示为未通过
+ overallIcon = "✗";
+ overallText = "未通过";
+ overallColor = "#F44336";
+ }
+
+ QString overallStyle = QString("color: %1; font-size: 18px; font-weight: bold;").arg(overallColor);
+ QString textStyle = QString("color: %1;").arg(overallColor);
+
+ ui->overallStatusIcon->setText(overallIcon);
+ ui->overallStatusIcon->setStyleSheet(overallStyle);
+ ui->overallStatusText->setText(overallText);
+ ui->overallStatusText->setStyleSheet(textStyle);
+}
+
+// 保存测试记录到CSV文件（可用Excel打开）
+QString MainWindow::saveTestRecord()
+{
+ QDateTime endTime = QDateTime::currentDateTime();
+ QString startTimeStr = testStartTime.toString("yyyy-MM-dd hh:mm:ss");
+ QString endTimeStr = endTime.toString("yyyy-MM-dd hh:mm:ss");
+
+ // 计算测试总耗时
+ qint64 totalSeconds = testStartTime.secsTo(endTime);
+ int minutes = totalSeconds / 60;
+ int seconds = totalSeconds % 60;
+ QString durationStr = QString("%1分%2秒").arg(minutes).arg(seconds);
+
+ QString date = endTime.toString("yyyy-MM-dd");
+
+ // 获取当前测试数据
+ QString ver = ui->VerlineEdit->text().trimmed();
+ QString imei = ui->IMEIlineEdit->text().trimmed();
+ QString iccid = ui->ICCIDlineEdit->text().trimmed();
+ QString modem = ui->ModemVerlineEdit->text().trimmed();
+ QString pyver = ui->PYVerlineEdit->text().trimmed();
+
+ // 检查ICCID是否有效，如果无效则不写入记录
+ if (iccid.isEmpty() || iccid == "未获取") {
+ qDebug() << "ICCID为空或未获取，跳过保存测试记录";
+ ui->statusbar->showMessage("ICCID未获取，测试记录未保存", 3000);
+ return QString(); // 返回空字符串表示未保存
+ }
+
+ // 检查ICCID格式是否正确
+ if (!isValidICCID(iccid)) {
+ qDebug() << "ICCID格式不正确，跳过保存测试记录，ICCID:" << iccid;
+ ui->statusbar->showMessage("ICCID格式不正确，测试记录未保存: " + iccid, 3000);
+ return QString(); // 返回空字符串表示未保存
+ }
+
+ // 检查IMEI格式是否正确（如果IMEI不为空）
+ if (!imei.isEmpty() && !isValidIMEI(imei)) {
+ qDebug() << "IMEI格式不正确，跳过保存测试记录，IMEI:" << imei;
+ ui->statusbar->showMessage("IMEI格式不正确，测试记录未保存: " + imei, 3000);
+ return QString(); // 返回空字符串表示未保存
+ }
+
+ // 调试信息：输出获取到的值
+ qDebug() << "保存时获取的数据:";
+ qDebug() << " Ver:" << (ver.isEmpty() ? "空" : ver);
+ qDebug() << " IMEI:" << (imei.isEmpty() ? "空" : imei);
+ qDebug() << " ICCID:" << iccid;
+ qDebug() << " Modem:" << (modem.isEmpty() ? "空" : modem);
+ qDebug() << " PYVER:" << (pyver.isEmpty() ? "空" : pyver);
+
+ // 获取各项测试结果
+ QString lcdResult = ui->lcdStatusText->text();
+ QString motorResult = ui->motorStatusText->text();
+ QString keyResult = ui->keyStatusText->text();
+ QString audioResult = ui->audioStatusText->text();
+ QString batteryResult = ui->batteryStatusText->text();
+ QString gsensorResult = ui->gsensorStatusText->text();
+ QString pppResult = ui->pppStatusText->text();
+ QString overallResult = ui->overallStatusText->text();
+
+ // 创建保存目录（在源码同一路径下）
+ QString appPath = QCoreApplication::applicationDirPath();
+ QString saveDir = appPath + "/产测记录";
+ QDir dir;
+ if (!dir.exists(saveDir)) {
+ dir.mkpath(saveDir);
+ }
+
+ // CSV文件路径（统一命名）
+ QString csvFileName = "产测记录.csv";
+ QString csvFilePath = saveDir + "/" + csvFileName;
+
+ // 检查是否是新文件（需要写入表头）
+ bool isNewFile = !QFile::exists(csvFilePath);
+
+ // 构建新的测试数据行
+ QString newDataLine = QString("%1,%2,%3,%4,%5,%6,%7,%8,%9,%10,%11,%12,%13,%14,%15\n")
+ .arg(startTimeStr)
+ .arg(endTimeStr)
+ .arg(durationStr)
+ .arg(ver.isEmpty() ? "未获取" : ver)
+ .arg(imei.isEmpty() ? "未获取" : imei)
+ .arg(iccid.isEmpty() ? "未获取" : iccid)
+ .arg(modem.isEmpty() ? "未获取" : modem)
+ .arg(pyver.isEmpty() ? "未获取" : pyver)
+ .arg(lcdResult)
+ .arg(motorResult)
+ .arg(keyResult)
+ .arg(audioResult)
+ .arg(batteryResult)
+ .arg(gsensorResult)
+ .arg(pppResult)
+ .arg(overallResult);
+
+ QString finalContent;
+
+ if (isNewFile) {
+ // 新文件，写入表头和数据
+ finalContent += "开始时间,结束时间,测试耗时,软件版本,IMEI,ICCID,Modem版本,PYVER版本,LCD测试,马达测试,按键测试,录音测试,电池测试,G-sensor测试,4G测试,整体结果\n";
+ finalContent += newDataLine;
+ qDebug() << "创建新的CSV文件:" << csvFilePath;
+ } else {
+ // 现有文件，需要检查ICCID是否重复
+ QFile existingFile(csvFilePath);
+ if (!existingFile.open(QIODevice::ReadOnly | QIODevice::Text)) {
+ QMessageBox::warning(this, "读取失败",
+ QString("无法读取现有测试记录文件：\n%1").arg(csvFilePath));
+ return QString();
+ }
+
+ // 读取所有现有数据
+ QStringList existingLines;
+ QTextStream readStream(&existingFile);
+ while (!readStream.atEnd()) {
+ existingLines << readStream.readLine();
+ }
+ existingFile.close();
+
+ // 构建最终内容
+ if (!existingLines.isEmpty()) {
+ finalContent = existingLines[0] + "\n"; // 表头
+
+ bool iccidFound = false;
+
+ // 检查每一行数据，查找相同ICCID
+ for (int i = 1; i < existingLines.size(); i++) {
+ QString line = existingLines[i];
+ if (line.trimmed().isEmpty()) continue;
+
+ // 分割CSV行，获取ICCID字段（第6列，索引为5）
+ QStringList fields = line.split(",");
+ if (fields.size() >= 6) {
+ QString existingIccid = fields[5].trimmed();
+
+ if (existingIccid == iccid) {
+ // 找到相同ICCID，替换为新记录
+ finalContent += newDataLine;
+ iccidFound = true;
+ qDebug() << "找到相同ICCID，替换记录:" << iccid;
+ } else {
+ // 保留不同ICCID的记录
+ finalContent += line + "\n";
+ }
+ } else {
+ // 格式不正确的行，保留
+ finalContent += line + "\n";
+ }
+ }
+
+ // 如果没有找到相同ICCID，追加新记录
+ if (!iccidFound) {
+ finalContent += newDataLine;
+ qDebug() << "未找到相同ICCID，追加新记录:" << iccid;
+ }
+ } else {
+ // 文件为空，重建
+ finalContent = "开始时间,结束时间,测试耗时,软件版本,IMEI,ICCID,Modem版本,LCD测试,马达测试,按键测试,录音测试,电池测试,G-sensor测试,4G测试,整体结果\n";
+ finalContent += newDataLine;
+ }
+ }
+
+ // 写入最终内容到文件
+ QFile csvFile(csvFilePath);
+ if (!csvFile.open(QIODevice::WriteOnly | QIODevice::Text)) {
+ QMessageBox::warning(this, "保存失败",
+ QString("无法创建测试记录文件：\n%1\n错误：%2")
+ .arg(csvFilePath)
+ .arg(csvFile.errorString()));
+ return QString(); // 返回空字符串表示保存失败
+ }
+
+ // 使用系统本地编码写入数据（Windows下通常是GBK）
+ QByteArray localData = finalContent.toLocal8Bit();
+ csvFile.write(localData);
+ qDebug() << "使用本地编码写入数据，大小:" << localData.size() << "字节";
+
+ csvFile.close();
+
+ qDebug() << "测试记录已保存到:" << csvFilePath;
+ qDebug() << "记录内容: 开始时间=" << startTimeStr << ", 结束时间=" << endTimeStr << ", 耗时=" << durationStr
+ << ", Ver=" << ver << ", IMEI=" << imei << ", ICCID=" << iccid << ", Modem=" << modem
+ << ", PYVER=" << pyver << ", LCD=" << lcdResult << ", 马达=" << motorResult
+ << ", 按键=" << keyResult << ", PPP=" << pppResult
+ << ", 整体=" << overallResult;
+
+ // 显示保存成功消息
+ ui->statusbar->showMessage(QString("测试记录已保存: %1").arg(csvFileName), 3000);
+
+ // 返回文件名供外部使用
+ return csvFileName;
+}
+
+
+// 检查signal和sim值进行4G测试判断
+void MainWindow::checkSignalAndSimValues(const QString& data)
+{
+ qDebug() << "开始检查signal和sim值，数据:" << data.trimmed();
+
+ // 标记已收到signal和sim数据
+ hasReceivedSignalSim = true;
+
+ // 停止超时检测，因为已经收到数据
+ if (test4GTimer->isActive()) {
+ test4GTimer->stop();
+ qDebug() << "收到signal和sim数据，停止4G测试超时检测";
+ }
+
+ // 解析sim值：@sim:1@
+ QRegExp simRegex("@sim:(\\d+)@");
+ int simValue = -1;
+ if (simRegex.indexIn(data) != -1) {
+ simValue = simRegex.cap(1).toInt();
+ qDebug() << "解析到sim值:" << simValue;
+
+ // 保存SIM卡状态
+ currentSimStatus = simValue;
+ qDebug() << "更新SIM卡状态:" << (currentSimStatus == 1 ? "已插入" : "未插入");
+ } else {
+ qDebug() << "未找到sim值";
+ return;
+ }
+
+ // 解析signal值：@signal:31@
+ QRegExp signalRegex("@signal:(\\d+)@");
+ int signalValue = -1;
+ if (signalRegex.indexIn(data) != -1) {
+ signalValue = signalRegex.cap(1).toInt();
+ qDebug() << "解析到signal值:" << signalValue;
+
+ // 将signal值显示到界面
+ ui->recvTextEdit->append(QString("Signal值: %1").arg(signalValue));
+ ui->statusbar->showMessage(QString("检测到Signal值: %1").arg(signalValue), 2000);
+ } else {
+ qDebug() << "未找到signal值";
+ return;
+ }
+
+ // 移除signal=99的立即失败逻辑，改为在CAT1测试中统计处理
+
+ // 如果是第一次收到signal值，启动CAT1信号测试
+ if (!hasReceivedFirstSignal) {
+ hasReceivedFirstSignal = true;
+ qDebug() << "收到第一次signal值:" << signalValue << "，启动CAT1信号测试";
+
+ // 停止signal4GTimer，避免与CAT1测试冲突导致重复弹窗
+ if (signal4GTimer->isActive()) {
+ signal4GTimer->stop();
+ qDebug() << "停止signal4GTimer，改用CAT1信号测试";
+ }
+
+ // 初始化CAT1信号测试计数器
+ cat1SignalTestCount = 0;
+ cat1SignalReceivedCount = 0;
+ cat1SignalGoodCount = 0;
+ cat1Signal99Count = 0;
+ cat1SignalTotalValue = 0;
+ // 移除了cat1ProcessedSignals的清理，改用时间戳方式
+
+ // 启动CAT1信号测试定时器，每2秒发送一次
+ cat1SignalTimer->start(2000);
+ ui->statusbar->showMessage("开始CAT1信号测试，每2秒检测一次...", 3000);
+
+ // 立即发送第一次CAT1信号检测指令
+ serial->write("AT^CAT1GETSIGNAL\r\n");
+ cat1SignalTestCount++;
+ qDebug() << "发送第" << cat1SignalTestCount << "次CAT1信号检测指令: AT^CAT1GETSIGNAL";
+ return;
+ }
+
+ // 如果已经启动了CAT1信号测试，不再执行旧的判断逻辑
+ if (hasReceivedFirstSignal) {
+ qDebug() << "已启动CAT1信号测试，跳过旧的signal判断逻辑";
+ return;
+ }
+
+ // 判断4G测试是否通过（这段代码理论上不会执行到）
+ bool simOk = (simValue == 1);
+ bool signalOk = (signalValue > 25);
+ bool testPassed = simOk && signalOk;
+
+ qDebug() << "4G测试判断结果:";
+ qDebug() << " sim值:" << simValue << "(期望: 1)" << "检查结果:" << (simOk ? "通过" : "失败");
+ qDebug() << " signal值:" << signalValue << "(期望: >25)" << "检查结果:" << (signalOk ? "通过" : "失败");
+ qDebug() << " 最终测试结果:" << (testPassed ? "通过" : "失败");
+ qDebug() << " 警告：此代码不应该执行到，因为已启动CAT1测试";
+
+ if (testPassed) {
+ // 测试通过
+ ui->statusbar->showMessage(QString("4G测试通过 - SIM: %1, Signal: %2").arg(simValue).arg(signalValue), 3000);
+ updateTestStatus("ppp", STATUS_SUCCESS);
+
+ // 完成产测
+ if (isProductionTestRunning) {
+ currentTestStep = TEST_COMPLETED;
+ isProductionTestRunning = false;
+ qDebug() << "4G测试通过，产测流程完成";
+
+ // 保存测试记录
+ QString fileName = saveTestRecord();
+
+ // 显示最终测试结果弹窗
+ showFinalTestResult();
+ }
+ } else {
+ // 测试失败
+ QString failReason;
+ if (simValue != 1) {
+ failReason += QString("SIM卡状态异常(值:%1,期望:1) ").arg(simValue);
+ }
+ if (signalValue == 99) {
+ failReason += QString("无效信号值(值:%1)").arg(signalValue);
+ } else if (signalValue <= 25) {
+ failReason += QString("信号强度不足(值:%1,期望:>25)").arg(signalValue);
+ }
+
+ ui->statusbar->showMessage(QString("4G测试失败 - %1").arg(failReason), 3000);
+ updateTestStatus("ppp", STATUS_FAILED);
+
+ // 完成产测（失败）
+ if (isProductionTestRunning) {
+ currentTestStep = TEST_COMPLETED;
+ isProductionTestRunning = false;
+ qDebug() << "4G测试失败，产测流程完成";
+
+ // 保存测试记录
+ QString fileName = saveTestRecord();
+
+ // 显示最终测试结果弹窗
+ showFinalTestResult();
+ }
+ }
+}
+
+// 解析wstp_print格式的BTMAC和CyweeChipInfo数据
+void MainWindow::parseWstpPrintData(const QString& data)
+{
+ qDebug() << "检测到wstp_print格式数据:" << data.trimmed();
+
+ // 解析BTMAC地址
+ // 格式：^^^^ BTMAC=XX:XX:XX:XX:XX:XX ^^^^
+ QRegExp btmacPattern("\\^\\^\\^\\^ BTMAC=([0-9A-Fa-f:]{17}) \\^\\^\\^\\^");
+ if (btmacPattern.indexIn(data) != -1) {
+ QString btmac = btmacPattern.cap(1);
+ qDebug() << "解析到BTMAC地址:" << btmac;
+
+ // 这里可以将BTMAC地址填充到相应的文本框
+ // 如果有专门的BTMAC文本框，可以这样设置：
+ // ui->btmacLineEdit->setText(btmac);
+
+ // 暂时显示在状态栏
+ ui->statusbar->showMessage(QString("检测到蓝牙MAC地址: %1").arg(btmac), 3000);
+ }
+
+ // 解析CyweeChipInfo
+ // 格式：^^^^ CyweeChipInfo=XXXXXX ^^^^
+ QRegExp chipinfoPattern("\\^\\^\\^\\^ CyweeChipInfo=([^\\s\\^]+)");
+ if (chipinfoPattern.indexIn(data) != -1) {
+ QString chipinfo = chipinfoPattern.cap(1);
+ qDebug() << "解析到CyweeChipInfo:" << chipinfo;
+
+ // 这里可以将芯片信息填充到相应的文本框
+ // 如果有专门的芯片信息文本框，可以这样设置：
+ // ui->chipinfoLineEdit->setText(chipinfo);
+
+ // 暂时显示在状态栏
+ ui->statusbar->showMessage(QString("检测到芯片信息: %1").arg(chipinfo), 3000);
+ }
+
+ // 完整的数据格式示例：
+ // wstp_print("^^^^ BTMAC=%s ^^^^ CyweeChipInfo=%s\n",btaddr_str,chipinfo);
+ // 实际输出可能是：^^^^ BTMAC=AA:BB:CC:DD:EE:FF ^^^^ CyweeChipInfo=MSA310
+
+ // 如果需要同时解析两个值的完整格式
+ QRegExp fullPattern("\\^\\^\\^\\^ BTMAC=([0-9A-Fa-f:]{17}) \\^\\^\\^\\^ CyweeChipInfo=([^\\s\\^\\n]+)");
+ if (fullPattern.indexIn(data) != -1) {
+ QString btmac = fullPattern.cap(1);
+ QString chipinfo = fullPattern.cap(2);
+
+ qDebug() << "完整解析 - BTMAC:" << btmac << ", CyweeChipInfo:" << chipinfo;
+
+ // 可以在这里将信息填充到对应的UI控件
+ // 例如：
+ // ui->btmacLineEdit->setText(btmac);
+ // ui->chipinfoLineEdit->setText(chipinfo);
+
+ ui->statusbar->showMessage(QString("设备信息 - MAC: %1, 芯片: %2").arg(btmac, chipinfo), 5000);
+ }
+}
+
+// 发送PPP指令
+void MainWindow::sendPppCommand()
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_PPP_INIT) {
+ qDebug() << "PPP数据等待跳过 - 测试状态不正确";
+ return;
+ }
+
+ pppCommandCount++;
+ qDebug() << "等待PPP数据，第" << pppCommandCount << "次";
+
+ if (pppCommandCount <= 3) {
+ // 前3次等待PPP相关数据
+ ui->statusbar->showMessage(QString("4G测试中 - 等待PPP数据(%1/3)").arg(pppCommandCount), 3000);
+
+ // 不再发送PPPENVINIT指令，直接等待设备自动发送PPPINFO
+
+ // 启动5秒超时定时器，等待PPPINFO回复
+ test4GTimer->start(5000);
+ qDebug() << "启动5秒超时定时器，等待PPPINFO回复";
+ } else {
+ // 超过3次后，改为等待signal和sim数据
+ qDebug() << "PPP数据已等待3次，改为等待signal和sim数据";
+ ui->statusbar->showMessage("4G测试中 - 等待signal和sim数据...", 5000);
+
+ // 启动5秒超时检测，等待signal和sim数据
+ test4GTimer->start(5000);
+ qDebug() << "启动5秒超时检测，等待signal和sim数据";
+ }
+}
+
+// 打开记录文件夹
+void MainWindow::on_openRecordsFolderButton_clicked()
+{
+ QString appPath = QCoreApplication::applicationDirPath();
+ QString saveDir = appPath + "/产测记录";
+
+ // 如果文件夹不存在，先创建它
+ QDir dir;
+ if (!dir.exists(saveDir)) {
+ dir.mkpath(saveDir);
+ qDebug() << "创建产测记录文件夹:" << saveDir;
+ }
+
+ // 打开文件夹
+ bool success = QDesktopServices::openUrl(QUrl::fromLocalFile(saveDir));
+
+ if (success) {
+ qDebug() << "成功打开文件夹:" << saveDir;
+ ui->statusbar->showMessage("已打开产测记录文件夹", 2000);
+ } else {
+ qDebug() << "打开文件夹失败:" << saveDir;
+ QMessageBox::warning(this, "打开失败",
+ QString("无法打开文件夹：\n%1\n请检查路径是否存在或权限是否足够").arg(saveDir));
+ }
+}
+
+void MainWindow::on_openButton_2_clicked()
+{
+ // 检查串口是否已打开
+ if (!serial->isOpen()) {
+ QMessageBox::warning(this, "警告", "请先打开串口连接");
+ return;
+ }
+
+ if (isProductionTestRunning) {
+ // 如果正在测试，则停止测试
+ lcdTestTimer->stop();
+ motorTestTimer->stop();
+ test4GTimer->stop();
+ signal4GTimer->stop();
+ testTimeoutTimer->stop();
+ isProductionTestRunning = false;
+ currentTestStep = TEST_IDLE;
+ ui->statusbar->showMessage("产测已停止", 2000);
+ qDebug() << "产测被用户停止";
+
+ // 恢复产测按钮状态 - 变回蓝色并启用
+ ui->openButton_2->setStyleSheet("QPushButton { background-color: #4A90E2; color: white; padding: 5px 10px; border: none; border-radius: 3px; }");
+ ui->openButton_2->setEnabled(true);
+ qDebug() << "产测停止 - 按钮已恢复蓝色并启用";
+
+ return;
+ }
+
+ // 开始产测流程
+ isProductionTestRunning = true;
+ testStartTime = QDateTime::currentDateTime(); // 记录测试开始时间
+ currentTestStep = TEST_RESET;
+ currentLcdColor = 1; // 从红色开始
+ initRetry4GCount = 0;
+ signalTest4GCount = 0;
+ signalReceived4GCount = 0;
+ signalGood4GCount = 0;
+ pppCommandCount = 0;
+ hasReceivedSignalSim = false;
+ hasReceivedPppInfo = false;
+
+ // 清空所有UI内容
+ ui->recvTextEdit->clear(); // 清空串口接收文本框
+ ui->sendTextEdit->clear(); // 清空发送文本框
+ ui->statusbar->clearMessage(); // 清空状态栏
+
+ // 清空设备信息
+ ui->VerlineEdit->clear(); // 清空版本信息
+ ui->IMEIlineEdit->clear(); // 清空IMEI
+ ui->ICCIDlineEdit->clear(); // 清空ICCID
+ ui->ModemVerlineEdit->clear(); // 清空调制解调器版本
+ ui->PYVerlineEdit->clear(); // 清空python版本
+
+ // 重置弹窗状态
+ lcdTestPopupShown = false;
+ motorTestPopupShown = false;
+ isWaitingForUserConfirm = false;
+ keyTestStarted = false;
+ audioTestPopupShown = false;
+ audioPlaybackPopupShown = false;
+
+ // 重置状态指示器
+ updateTestStatus("lcd", STATUS_UNTESTED);
+ updateTestStatus("motor", STATUS_UNTESTED);
+ updateTestStatus("key", STATUS_UNTESTED);
+ updateTestStatus("audio", STATUS_UNTESTED);
+ updateTestStatus("battery", STATUS_UNTESTED);
+ updateTestStatus("gsensor", STATUS_UNTESTED);
+ updateTestStatus("ppp", STATUS_UNTESTED);
+
+ qDebug() << "已清空所有UI内容，准备开始新的产测";
+
+ ui->statusbar->showMessage("开始产测流程...", 2000);
+ qDebug() << "=== 开始产测流程 ===";
+ qDebug() << "流程: 产测开启(AT^FACTORY=1) → 设备重启 → 等待BuildVer → LCD测试(红绿蓝各1s) → 马达测试(开启2s) → 按键测试 → 录音测试(录音3s+播放) → 电池测试(电压检测) → G-sensor测试 → 4G测试(初始化+信号检测) → 退出产测(AT^FACTORY=0)";
+ qDebug() << "LCD指令映射: 进入=AT^LCDTEST=1, 红色=AT^LCDTEST=6, 绿色=AT^LCDTEST=3, 蓝色=AT^LCDTEST=4, 退出=AT^LCDTEST=2";
+
+ // 发送产测开启指令，等待工厂模式确认
+ qDebug() << "Step 1: 发送产测开启指令";
+ ui->statusbar->showMessage("发送产测开启指令，等待设备确认...", 3000);
+ serial->write("AT^FACTORY=1\r\n");
+ qDebug() << "发送产测开启指令(第1次): AT^FACTORY=1，等待接收 'fac:enter or exit facotry mode' 确认";
+
+ // 延迟0.5秒后再发送一次，确保设备接收到指令
+ QTimer::singleShot(500, this, [this]() {
+ if (isProductionTestRunning && serial->isOpen()) {
+ serial->write("AT^FACTORY=1\r\n");
+ qDebug() << "发送产测开启指令(第2次): AT^FACTORY=1";
+ }
+ });
+
+ // 启动10秒超时检测，如果没有收到工厂模式确认则提示
+ testTimeoutTimer->start(10000);
+}
+
+// 执行录音测试
+void MainWindow::performAudioTest()
+{
+ qDebug() << "*** performAudioTest 被调用 ***";
+ qDebug() << "当前状态检查 - isProductionTestRunning:" << isProductionTestRunning;
+ qDebug() << "当前状态检查 - currentTestStep:" << currentTestStep;
+ qDebug() << "当前状态检查 - TEST_AUDIO:" << TEST_AUDIO;
+
+ if (!isProductionTestRunning || currentTestStep != TEST_AUDIO) {
+ qDebug() << "*** performAudioTest 条件不满足，退出 ***";
+ return;
+ }
+
+ qDebug() << "开始录音测试";
+ updateTestStatus("audio", STATUS_TESTING);
+ ui->statusbar->showMessage("录音测试准备就绪", 3000);
+
+ // 重置录音测试相关标志
+ audioTestPopupShown = false;
+ audioPlaybackPopupShown = false;
+ currentAudioStep = AUDIO_STARTING_RECORD;
+
+ // 显示录音测试弹窗，等待用户点击开始录音
+ showAudioTestDialog();
+}
+
+// 显示录音测试弹窗
+void MainWindow::showAudioTestDialog()
+{
+ if (audioTestPopupShown || !isProductionTestRunning || currentTestStep != TEST_AUDIO) {
+ qDebug() << "录音测试弹窗已显示或条件不满足，跳过显示";
+ return;
+ }
+
+ // 如果已经有录音测试弹窗存在，先关闭它
+ if (audioTestDialog) {
+ qDebug() << "检测到已存在的录音测试弹窗，先关闭";
+ audioTestDialog->close();
+ audioTestDialog->deleteLater();
+ audioTestDialog = nullptr;
+ }
+
+ // 创建录音测试对话框
+ audioTestDialog = new QDialog(this);
+ audioTestDialog->setWindowTitle("录音测试");
+ audioTestDialog->setFixedSize(520, 350);
+ audioTestDialog->setWindowFlags(Qt::Dialog | Qt::WindowStaysOnTopHint | Qt::CustomizeWindowHint | Qt::WindowTitleHint);
+
+ // 设置对话框样式
+ audioTestDialog->setStyleSheet(
+ "QDialog { "
+ "background-color: #f0f0f0; "
+ "border-radius: 8px; "
+ "}"
+ );
+
+ // 使用垂直布局管理器
+ QVBoxLayout *mainLayout = new QVBoxLayout(audioTestDialog);
+ mainLayout->setSpacing(15);
+ mainLayout->setContentsMargins(20, 20, 20, 20);
+
+ // 创建主标签
+ audioDialogLabel = new QLabel("🎤 录音测试");
+ audioDialogLabel->setAlignment(Qt::AlignCenter);
+ audioDialogLabel->setStyleSheet(
+ "QLabel { "
+ "font-size: 18px; "
+ "font-weight: bold; "
+ "background-color: #4CAF50; "
+ "color: white; "
+ "border-radius: 4px; "
+ "padding: 12px; "
+ "}"
+ );
+ mainLayout->addWidget(audioDialogLabel);
+
+ // 创建信息标签
+ audioDialogInfo = new QLabel("🎤 请点击下方按钮开始录音测试\n流程：开始录音→1s后播放1kHz音频→2s后停止播放和录音→1s后播放录音→3s后停止");
+ audioDialogInfo->setAlignment(Qt::AlignCenter);
+ audioDialogInfo->setWordWrap(true);
+ audioDialogInfo->setMinimumHeight(80);
+ audioDialogInfo->setStyleSheet(
+ "QLabel { "
+ "font-size: 14px; "
+ "background-color: white; "
+ "border: 1px solid #ddd; "
+ "border-radius: 4px; "
+ "padding: 15px; "
+ "color: #333; "
+ "}"
+ );
+ mainLayout->addWidget(audioDialogInfo);
+
+ // 创建开始录音按钮布局
+ QHBoxLayout *startLayout = new QHBoxLayout();
+ startLayout->setSpacing(10);
+
+ audioStartButton = new QPushButton("🎤 开始录音测试");
+ audioStartButton->setMinimumHeight(50);
+ audioStartButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #2196F3; "
+ "color: white; "
+ "padding: 12px 20px; "
+ "border-radius: 4px; "
+ "font-weight: bold; "
+ "font-size: 16px; "
+ "}"
+ );
+ startLayout->addWidget(audioStartButton);
+ mainLayout->addLayout(startLayout);
+
+ // 创建测试结果按钮布局
+ QHBoxLayout *resultLayout = new QHBoxLayout();
+ resultLayout->setSpacing(10);
+
+ // 创建按钮
+ audioPassButton = new QPushButton("✓ 录音正常");
+ audioPassButton->setMinimumHeight(45);
+ audioPassButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #4CAF50; "
+ "color: white; "
+ "padding: 10px 15px; "
+ "border-radius: 4px; "
+ "font-weight: bold; "
+ "font-size: 14px; "
+ "} "
+ "QPushButton:disabled { "
+ "background-color: #cccccc; "
+ "color: #666666; "
+ "}"
+ );
+ audioPassButton->setEnabled(true); // 允许直接点击通过
+
+ audioFailButton = new QPushButton("✗ 录音异常");
+ audioFailButton->setMinimumHeight(45);
+ audioFailButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #f44336; "
+ "color: white; "
+ "padding: 10px 15px; "
+ "border-radius: 4px; "
+ "font-weight: bold; "
+ "font-size: 14px; "
+ "}"
+ );
+ audioFailButton->setEnabled(false); // 初始禁用
+
+ audioRetestButton = new QPushButton("🔄 重新测试");
+ audioRetestButton->setMinimumHeight(45);
+ audioRetestButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #FF9800; "
+ "color: white; "
+ "padding: 10px 15px; "
+ "border-radius: 4px; "
+ "font-weight: bold; "
+ "font-size: 14px; "
+ "}"
+ );
+ audioRetestButton->setEnabled(false); // 初始禁用
+
+ resultLayout->addWidget(audioPassButton);
+ resultLayout->addWidget(audioFailButton);
+ resultLayout->addWidget(audioRetestButton);
+
+ // 添加按钮布局到主布局
+ mainLayout->addLayout(resultLayout);
+
+ // 连接开始录音按钮事件
+ connect(audioStartButton, &QPushButton::clicked, [this]() {
+ qDebug() << "用户点击开始录音测试";
+
+ // 禁用开始按钮，更新界面状态
+ audioStartButton->setEnabled(false);
+ audioDialogInfo->setText("🎤 正在开始录音...\n请保持安静");
+
+ // 发送开始录音指令
+ QString recordCommand = "AT^MEDIAAUDIORECORD=xx,mp3,16000,1,16,/user/res/music/1.mp3\r\n";
+ serial->write(recordCommand.toUtf8());
+ qDebug() << "发送录音开始指令:" << recordCommand.trimmed();
+
+ // 延迟1秒后发送播放1kHz音频指令
+ QTimer::singleShot(1000, this, [this]() {
+ if (audioTestDialog && isProductionTestRunning) {
+ audioDialogInfo->setText("📢 正在播放1kHz测试音频（2秒）\n同时进行录音，请注意听声音...");
+
+ // 发送播放1kHz音频指令
+ QString play1khzCommand = "AT^MEDIAMUSICPLAY=xx,/user/res/music/1khz.mp3,1,0\r\n";
+ serial->write(play1khzCommand.toUtf8());
+ qDebug() << "发送播放1kHz音频指令:" << play1khzCommand.trimmed();
+
+ // 设置当前步骤为播放1kHz音频，启动2秒定时器
+ currentAudioStep = AUDIO_PLAYING_1KHZ;
+ audioRecordTimer->start(2000);
+ }
+ });
+ });
+
+ // 连接测试结果按钮事件
+ connect(audioPassButton, &QPushButton::clicked, [this]() {
+ if (audioTestDialog) {
+ audioTestDialog->accept();
+ qDebug() << "用户确认：录音测试通过";
+ ui->statusbar->showMessage("录音测试通过", 2000);
+ updateTestStatus("audio", STATUS_SUCCESS);
+
+ // 继续电池测试
+ currentTestStep = TEST_BATTERY;
+ performBatteryTest();
+ }
+ });
+
+ connect(audioFailButton, &QPushButton::clicked, [this]() {
+ if (audioTestDialog) {
+ audioTestDialog->accept();
+ qDebug() << "用户确认：录音测试失败";
+ ui->statusbar->showMessage("录音测试失败", 2000);
+ updateTestStatus("audio", STATUS_FAILED);
+
+ // 继续电池测试
+ currentTestStep = TEST_BATTERY;
+ performBatteryTest();
+ }
+ });
+
+ connect(audioRetestButton, &QPushButton::clicked, [this]() {
+ qDebug() << "用户选择重新测试录音";
+
+ // 发送停止指令
+ serial->write("AT^MEDIAMUSICSTOP\r\n");
+ serial->write("AT^MEDIAAUDIORECORDSTOP\r\n");
+
+ // 重置界面状态
+ audioStartButton->setEnabled(true);
+ audioPassButton->setEnabled(false);
+ audioFailButton->setEnabled(false);
+ audioRetestButton->setEnabled(false);
+ audioDialogInfo->setText("🎤 请点击下方按钮开始录音测试\n流程：开始录音→1s后播放1kHz音频→2s后停止播放和录音→1s后播放录音→3s后停止");
+
+ // 重置录音测试状态
+ currentAudioStep = AUDIO_STARTING_RECORD;
+ audioRecordTimer->stop();
+
+ qDebug() << "录音测试已重置，等待用户重新开始";
+ });
+
+ // 显示对话框
+ audioTestPopupShown = true;
+ audioTestDialog->show();
+ qDebug() << "录音测试弹窗已显示";
+}
+
+// 录音测试定时器 - 处理多个步骤的定时
+void MainWindow::onAudioRecordTimer()
+{
+ audioRecordTimer->stop();
+
+ if (!isProductionTestRunning || currentTestStep != TEST_AUDIO) {
+ return;
+ }
+
+ switch (currentAudioStep) {
+ case AUDIO_PLAYING_1KHZ:
+ {
+ // 2秒播放1kHz音频完成，停止播放
+ qDebug() << "1kHz音频播放2秒完成，发送停止播放指令";
+ ui->statusbar->showMessage("停止1kHz音频播放...", 2000);
+
+ // 更新弹窗信息
+ if (audioDialogInfo) {
+ audioDialogInfo->setText("⏹️ 停止播放1kHz音频，随后停止录音...\n请稍等片刻...");
+ }
+
+ // 先发送停止播放指令
+ serial->write("AT^MEDIAMUSICSTOP\r\n");
+ qDebug() << "发送停止播放指令: AT^MEDIAMUSICSTOP";
+
+ // 随后立即发送停止录音指令
+ serial->write("AT^MEDIAAUDIORECORDSTOP\r\n");
+ qDebug() << "发送停止录音指令: AT^MEDIAAUDIORECORDSTOP";
+
+ // 设置下一步骤，1秒后播放录制的音频
+ currentAudioStep = AUDIO_STOPPING_RECORD;
+ audioRecordTimer->start(1000);
+ break;
+ }
+
+ case AUDIO_STOPPING_RECORD:
+ {
+ // 1秒延迟完成，播放录制的音频
+ qDebug() << "开始播放录制的音频";
+ ui->statusbar->showMessage("正在播放录制的音频...", 3000);
+
+ // 更新弹窗信息
+ if (audioDialogInfo) {
+ audioDialogInfo->setText("🔊 正在播放刚才录制的音频（3秒）\n请仔细聆听音质是否清晰");
+ }
+
+ // 发送播放录制音频指令
+ QString playRecordedCommand = "AT^MEDIAMUSICPLAY=xx,/user/res/music/1.mp3,1,0\r\n";
+ serial->write(playRecordedCommand.toUtf8());
+ qDebug() << "发送播放录制音频指令:" << playRecordedCommand.trimmed();
+
+ // 设置下一步骤，3秒后停止播放录制的音频
+ currentAudioStep = AUDIO_PLAYING_RECORDED;
+ audioRecordTimer->start(3000);
+ break;
+ }
+
+ case AUDIO_PLAYING_RECORDED:
+ {
+ // 3秒播放录制音频完成，自动停止播放
+ qDebug() << "录制音频播放3秒完成，发送停止播放指令";
+ ui->statusbar->showMessage("录音测试流程完成", 2000);
+
+ // 更新弹窗信息并启用测试按钮
+ if (audioDialogInfo) {
+ audioDialogInfo->setText("✅ 录音测试流程完成！\n请根据刚才听到的音质选择测试结果");
+ }
+ if (audioPassButton) {
+ audioPassButton->setEnabled(true);
+ }
+ if (audioFailButton) {
+ audioFailButton->setEnabled(true);
+ }
+ if (audioRetestButton) {
+ audioRetestButton->setEnabled(true);
+ }
+
+ // 自动发送停止播放指令
+ serial->write("AT^MEDIAMUSICSTOP\r\n");
+ qDebug() << "发送停止播放指令: AT^MEDIAMUSICSTOP";
+
+ // 录音测试流程完成
+ currentAudioStep = AUDIO_STOPPING_PLAYBACK;
+ break;
+ }
+
+ default:
+ {
+ qDebug() << "未知的录音测试步骤:" << currentAudioStep;
+ break;
+ }
+ }
+}
+
+// 检查录音测试结果
+void MainWindow::checkAudioTestResult(const QString& data)
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_AUDIO) {
+ return;
+ }
+
+ qDebug() << "录音测试收到数据:" << data.trimmed();
+
+ // 录音测试现在由用户手动控制，不需要自动检测
+ qDebug() << "录音测试收到数据（用户手动控制模式）:" << data.trimmed();
+}
+
+// 执行电池测试
+void MainWindow::performBatteryTest()
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_BATTERY) {
+ return;
+ }
+
+ qDebug() << "开始电池测试";
+ updateTestStatus("battery", STATUS_TESTING);
+ ui->statusbar->showMessage("电池测试中，正在获取电池电压...", 3000);
+
+ // 发送电池电量查询指令
+ serial->write("AT^GETPOWER\r\n");
+ qDebug() << "发送电池测试指令: AT^GETPOWER";
+
+ // 启动10秒超时检测
+ testTimeoutTimer->start(10000);
+}
+
+// 检查电池测试结果
+void MainWindow::checkBatteryTestResult(const QString& data)
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_BATTERY) {
+ return;
+ }
+
+ qDebug() << "电池测试收到数据:" << data.trimmed();
+
+ // 解析电池电压数据，支持多种格式：
+ // 1. fac:voltage : 3.8 , percent 85 , charge : 1
+ // 2. Battery: 3.8V
+ // 3. 3.8V
+ QRegExp facVoltagePattern("fac:voltage\\s*:\\s*(\\d+\\.\\d+)\\s*,\\s*percent\\s*(\\d+)\\s*,\\s*charge\\s*:\\s*(\\d+)");
+ QRegExp batteryPattern("Battery.*?(\\d+\\.\\d+)V?");
+ QRegExp voltagePattern("(\\d+\\.\\d+)V");
+
+ double voltage = 0.0;
+ int percent = 0;
+ int charge = -1; // -1表示未检测到充电状态
+ bool voltageFound = false;
+
+ if (facVoltagePattern.indexIn(data) != -1) {
+ // 新格式：fac:voltage : 3.8 , percent 85 , charge : 1
+ voltage = facVoltagePattern.cap(1).toDouble();
+ percent = facVoltagePattern.cap(2).toInt();
+ charge = facVoltagePattern.cap(3).toInt();
+ voltageFound = true;
+
+ qDebug() << "使用fac:voltage格式解析到电压:" << voltage << "V, 电量:" << percent << "%, 充电状态:" << charge;
+ } else if (batteryPattern.indexIn(data) != -1) {
+ voltage = batteryPattern.cap(1).toDouble();
+ voltageFound = true;
+ qDebug() << "使用Battery格式解析到电压:" << voltage;
+ } else if (voltagePattern.indexIn(data) != -1) {
+ voltage = voltagePattern.cap(1).toDouble();
+ voltageFound = true;
+ qDebug() << "使用通用电压格式解析到电压:" << voltage;
+ }
+
+ if (voltageFound) {
+ // 停止超时检测，因为已经收到响应
+ if (testTimeoutTimer->isActive()) {
+ testTimeoutTimer->stop();
+ qDebug() << "电池测试收到响应，停止超时检测";
+ }
+
+ qDebug() << "检测到电池电压:" << voltage << "V";
+
+ // 首先检查充电状态（如果有充电状态信息）
+ if (charge == 0) {
+ qDebug() << "电池未充电，测试失败";
+ ui->statusbar->showMessage("电池测试失败 - 设备未充电", 2000);
+ showBatteryChargeFailDialog();
+ return; // 不继续后续测试，等待用户操作
+ } else if (charge == -1) {
+ qDebug() << "未检测到充电状态信息";
+ ui->statusbar->showMessage("电池测试 - 未检测到充电状态", 2000);
+ // 显示提醒框告知用户未检测到充电状态
+ QMessageBox msgBox(this);
+ msgBox.setWindowTitle("充电状态提醒");
+ msgBox.setText("未检测到充电状态");
+ msgBox.setInformativeText("系统未能检测到设备的充电状态信息，\n但电压检测正常，是否继续测试？");
+ msgBox.setStandardButtons(QMessageBox::Yes | QMessageBox::No);
+ msgBox.setDefaultButton(QMessageBox::Yes);
+ msgBox.setIcon(QMessageBox::Warning);
+
+ int ret = msgBox.exec();
+ if (ret == QMessageBox::No) {
+ updateTestStatus("battery", STATUS_FAILED);
+ return;
+ }
+ }
+
+ // 判断电压是否在正常范围内 (3.3V - 4.4V)
+ if (voltage >= 3.3 && voltage <= 4.4) {
+ if (charge == 1) {
+ qDebug() << "电池电压正常且正在充电，测试通过";
+ ui->statusbar->showMessage(QString("电池测试通过 - 电压: %1V, 充电中").arg(voltage), 2000);
+ } else {
+ qDebug() << "电池电压正常，测试通过";
+ ui->statusbar->showMessage(QString("电池测试通过 - 电压: %1V").arg(voltage), 2000);
+ }
+ updateTestStatus("battery", STATUS_SUCCESS);
+ } else {
+ qDebug() << "电池电压异常，测试失败";
+ ui->statusbar->showMessage(QString("电池测试失败 - 电压异常: %1V").arg(voltage), 2000);
+ updateTestStatus("battery", STATUS_FAILED);
+ }
+
+ // 电池测试完成，开始G-sensor测试
+ if (isProductionTestRunning && currentTestStep == TEST_BATTERY) {
+ qDebug() << "电池测试完成，开始G-sensor测试";
+ currentTestStep = TEST_GSENSOR;
+ performGsensorTest();
+ }
+ }
+}
+
+// 执行G-sensor测试
+void MainWindow::performGsensorTest()
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_GSENSOR) {
+ return;
+ }
+
+ qDebug() << "开始G-sensor测试";
+ updateTestStatus("gsensor", STATUS_TESTING);
+ ui->statusbar->showMessage("G-sensor测试中，正在获取sensor ID...", 3000);
+
+ // 发送G-sensor查询指令
+ serial->write("AT^GETCYWEEID\r\n");
+ qDebug() << "发送G-sensor测试指令: AT^GETCYWEEID";
+
+ // 启动10秒超时检测
+ testTimeoutTimer->start(10000);
+}
+
+// 检查G-sensor测试结果
+void MainWindow::checkGsensorTestResult(const QString& data)
+{
+ qDebug() << "=== checkGsensorTestResult 被调用 ===";
+ qDebug() << "isProductionTestRunning:" << isProductionTestRunning;
+ qDebug() << "currentTestStep:" << currentTestStep << "(TEST_GSENSOR=" << TEST_GSENSOR << ")";
+
+ if (!isProductionTestRunning || currentTestStep != TEST_GSENSOR) {
+ qDebug() << "G-sensor测试条件不满足，跳过处理";
+ return;
+ }
+
+ qDebug() << "G-sensor测试收到数据:" << data.trimmed();
+
+ // 检测G-sensor ID，格式可能为：fac:gsensor id : 0x13 或类似
+ if (data.contains("gsensor") && data.contains("id")) {
+ QRegExp gsensorPattern("(?:fac:)?gsensor\\s+id\\s*[:]\\s*(0?[xX]?[0-9A-Fa-f]+)");
+ qDebug() << "尝试匹配G-sensor模式，输入数据:" << data.trimmed();
+ qDebug() << "正则表达式模式:" << gsensorPattern.pattern();
+ if (gsensorPattern.indexIn(data) != -1) {
+ // 停止超时检测，因为已经收到响应
+ if (testTimeoutTimer->isActive()) {
+ testTimeoutTimer->stop();
+ qDebug() << "G-sensor测试收到响应，停止超时检测";
+ }
+
+ qDebug() << "G-sensor正则表达式匹配通过！";
+ QString gsensorId = gsensorPattern.cap(1).toUpper(); // 转换为大写便于比较
+ qDebug() << "检测到G-sensor ID:" << gsensorId;
+
+ // 检查G-sensor ID是否为有效值（期望值为0X13）
+ // 支持多种格式: 0X13, 0x13, 13, 19 (十进制)
+ bool isValidId = false;
+ QString expectedId = "0X13";
+
+ // 统一转换为大写便于比较
+ QString upperGsensorId = gsensorId.toUpper();
+
+ if (upperGsensorId == "0X13" || upperGsensorId == "13") {
+ isValidId = true;
+ } else {
+ // 尝试解析数值进行比较
+ bool ok;
+ int decimalValue = 0;
+
+ // 如果以0X或0x开头，按十六进制解析
+ if (upperGsensorId.startsWith("0X")) {
+ decimalValue = upperGsensorId.mid(2).toInt(&ok, 16);
+ } else {
+ // 尝试直接按十六进制解析
+ decimalValue = upperGsensorId.toInt(&ok, 16);
+ // 如果十六进制解析失败，尝试十进制解析
+ if (!ok) {
+ decimalValue = upperGsensorId.toInt(&ok, 10);
+ }
+ }
+
+ if (ok && decimalValue == 0x13) {
+ isValidId = true;
+ }
+ }
+
+ if (isValidId) {
+ qDebug() << "G-sensor ID有效，测试通过";
+ ui->statusbar->showMessage(QString("G-sensor测试通过 - ID: %1").arg(gsensorId), 2000);
+ updateTestStatus("gsensor", STATUS_SUCCESS);
+ } else {
+ qDebug() << "G-sensor ID不匹配期望值，测试失败";
+ ui->statusbar->showMessage(QString("G-sensor测试失败 - ID: %1 (期望: 0X13)").arg(gsensorId), 2000);
+ updateTestStatus("gsensor", STATUS_FAILED);
+ }
+
+ // G-sensor测试完成，开始4G测试
+ if (isProductionTestRunning && currentTestStep == TEST_GSENSOR) {
+ qDebug() << "G-sensor测试完成，开始4G测试";
+
+ // 开始4G测试
+ currentTestStep = TEST_PPP_INIT;
+ perform4GTest();
+ }
+ } else {
+ qDebug() << "G-sensor正则表达式匹配失败，数据:" << data.trimmed();
+
+ // 手动测试特定格式：fac:gsensor id : 0x13
+ if (data.contains("gsensor id") && data.contains("0x13")) {
+ qDebug() << "手动检测到 fac:gsensor id : 0x13 格式，强制通过测试";
+ ui->statusbar->showMessage("G-sensor测试通过 - ID: 0x13 (手动检测)", 2000);
+ updateTestStatus("gsensor", STATUS_SUCCESS);
+
+ // G-sensor测试完成，开始4G测试
+ if (isProductionTestRunning && currentTestStep == TEST_GSENSOR) {
+ qDebug() << "G-sensor测试完成(手动)，开始4G测试";
+
+ // 开始4G测试
+ currentTestStep = TEST_PPP_INIT;
+ perform4GTest();
+ }
+ }
+ }
+ } else {
+ qDebug() << "数据不包含gsensor和id关键字，跳过G-sensor处理";
+ }
+
+ // 单独检查错误响应
+ if (data.contains("ERROR") || data.contains("FAIL")) {
+ qDebug() << "G-sensor测试失败 - 设备响应错误";
+ ui->statusbar->showMessage("G-sensor测试失败 - 设备无响应", 2000);
+ updateTestStatus("gsensor", STATUS_FAILED);
+
+ // G-sensor测试失败，仍然继续4G测试
+ if (isProductionTestRunning && currentTestStep == TEST_GSENSOR) {
+ qDebug() << "G-sensor测试失败，继续4G测试";
+
+ // 开始4G测试
+ currentTestStep = TEST_PPP_INIT;
+ perform4GTest();
+ }
+ }
+}
+
+// 检查CAT1信号测试结果
+void MainWindow::checkCat1SignalResult(const QString& data)
+{
+ if (!isProductionTestRunning || !hasReceivedFirstSignal) {
+ return;
+ }
+
+ qDebug() << "CAT1信号测试收到数据:" << data.trimmed();
+ qDebug() << "当前MODEM版本:" << currentModemVersion << "，类型判断:" << (isEGModem() ? "EG系列" : "非EG系列");
+
+ // 只在CAT1测试期间统计信号值
+ if (cat1SignalReceivedCount >= 5) {
+ qDebug() << "CAT1测试已接收5次响应，跳过统计";
+ return;
+ }
+
+ // 格式过滤已在调用前完成，这里不需要再次过滤
+
+ // 解析信号值，可能的格式：signal:31 或 CAT1GETSIGNAL OK signal:31
+ QRegExp signalRegex("signal:(\\d+)");
+ if (signalRegex.indexIn(data) != -1) {
+ int signalValue = signalRegex.cap(1).toInt();
+
+ // 改进的重复检查：基于信号值和时间戳的组合，避免相同信号值被误判为重复
+ // 只有在短时间内收到完全相同的数据包才认为是重复
+ static QString lastProcessedData;
+ static qint64 lastProcessedTime = 0;
+ qint64 currentTime = QDateTime::currentMSecsSinceEpoch();
+
+ // 如果是相同的数据且时间间隔小于100ms，则认为是重复数据
+ if (data.trimmed() == lastProcessedData && (currentTime - lastProcessedTime) < 100) {
+ qDebug() << "跳过重复的CAT1数据（时间间隔:" << (currentTime - lastProcessedTime) << "ms）";
+ return;
+ }
+
+ // 更新最后处理的数据和时间
+ lastProcessedData = data.trimmed();
+ lastProcessedTime = currentTime;
+
+ // 增加接收计数器
+ cat1SignalReceivedCount++;
+
+ qDebug() << "CAT1信号测试解析到signal值:" << signalValue << "，接收次数:" << cat1SignalReceivedCount << "/5";
+
+ // 将CAT1 signal值显示到界面
+ ui->recvTextEdit->append(QString("CAT1 Signal值: %1 (%2/5)").arg(signalValue).arg(cat1SignalReceivedCount));
+
+ // 统计信号值（用于计算平均值）
+ if (signalValue == 99) {
+ cat1Signal99Count++;
+ // signal=99不计入平均值计算
+ qDebug() << "CAT1信号值为99，无效信号次数:" << cat1Signal99Count << "/" << cat1SignalReceivedCount;
+ ui->statusbar->showMessage(QString("CAT1信号测试 (%1/5) 信号值:99 (无效信号)").arg(cat1SignalReceivedCount), 2000);
+ } else {
+ // 累加有效信号值用于计算平均值
+ cat1SignalTotalValue += signalValue;
+ if (signalValue > 25) {
+ cat1SignalGoodCount++;
+ }
+
+ // 计算当前平均值（排除signal=99的值）
+ int validCount = cat1SignalReceivedCount - cat1Signal99Count;
+ double averageSignal = validCount > 0 ? (double)cat1SignalTotalValue / validCount : 0;
+
+ qDebug() << "CAT1信号值" << signalValue << "，累计总和:" << cat1SignalTotalValue << "，当前平均值:" << averageSignal << "，有效次数:" << validCount << "/" << cat1SignalReceivedCount;
+ ui->statusbar->showMessage(QString("CAT1信号测试 (%1/5) 信号值:%2 平均值:%3").arg(cat1SignalReceivedCount).arg(signalValue).arg(averageSignal, 0, 'f', 1), 2000);
+ }
+ } else {
+ qDebug() << "CAT1信号测试未能解析signal值，数据:" << data.trimmed();
+ }
+}
+
+// 执行4G信号质量测试
+void MainWindow::perform4GSignalTest()
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_PPP_SIGNAL) {
+ return;
+ }
+
+ qDebug() << "开始4G信号质量测试";
+ ui->statusbar->showMessage("4G信号质量测试中...", 5000);
+
+ // 根据MODEM类型选择不同的测试方式
+ if (isEGModem()) {
+ qDebug() << "检测到EG系列MODEM，使用CAT1信号测试方式";
+ // EG系列MODEM：等待接收到第一次signal值后启动CAT1测试
+ // 这里不需要主动发送指令，等待设备自动发送包含signal的数据
+ ui->statusbar->showMessage("等待CAT1信号数据...", 5000);
+
+ // 启动超时检测，如果长时间没有收到signal数据则失败
+ signal4GTimer->start(10000); // 10秒超时
+ qDebug() << "启动CAT1信号等待超时检测(10秒)";
+ } else {
+ qDebug() << "检测到非EG系列MODEM，使用传统PPPSIGNALINFO测试方式";
+ // 重置计数器
+ signalTest4GCount = 0;
+ signalReceived4GCount = 0;
+ signalGood4GCount = 0;
+
+ // 立即发送第一次信号检测指令
+ serial->write("AT^PPPSIGNALINFO\r\n");
+ qDebug() << "发送4G信号检测指令: AT^PPPSIGNALINFO";
+ signalTest4GCount++;
+
+ // 启动5秒定时器，定期检测信号质量
+ signal4GTimer->start(5000);
+ qDebug() << "启动4G信号检测定时器(5秒间隔)";
+ }
+}
+
+// 4G信号检测定时器槽函数
+void MainWindow::on4GSignalTimer()
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_PPP_SIGNAL) {
+ signal4GTimer->stop();
+ return;
+ }
+
+ if (isEGModem()) {
+ // EG系列MODEM：超时处理，如果长时间没有收到CAT1信号数据则失败
+ signal4GTimer->stop();
+ qDebug() << "EG系列MODEM等待CAT1信号数据超时，测试失败";
+ ui->statusbar->showMessage("等待CAT1信号数据超时，测试失败", 5000);
+
+ // 显示4G重复测试弹窗
+ if (isProductionTestRunning) {
+ show4GRetryDialog("等待CAT1信号数据超时");
+ } else {
+ updateTestStatus("ppp", STATUS_FAILED);
+ }
+ } else {
+ // 非EG系列MODEM：继续发送PPPSIGNALINFO指令
+ serial->write("AT^PPPSIGNALINFO\r\n");
+ qDebug() << "定时发送4G信号检测指令: AT^PPPSIGNALINFO (第" << (signalTest4GCount + 1) << "次)";
+ signalTest4GCount++;
+
+ // 如果发送次数过多，停止测试并失败
+ if (signalTest4GCount >= 10) { // 最多发送10次指令 (约30秒)
+ signal4GTimer->stop();
+ qDebug() << "4G信号检测发送10次指令，未收到足够有效数据，测试失败";
+ ui->statusbar->showMessage("4G信号检测超时，测试失败", 5000);
+
+ // 显示4G重复测试弹窗
+ if (isProductionTestRunning) {
+ show4GRetryDialog("4G信号检测超时");
+ } else {
+ updateTestStatus("ppp", STATUS_FAILED);
+ }
+ }
+ }
+}
+
+// CAT1信号测试定时器槽函数
+void MainWindow::onCat1SignalTimer()
+{
+ if (!isProductionTestRunning || !hasReceivedFirstSignal) {
+ cat1SignalTimer->stop();
+ return;
+ }
+
+ // 检查是否已经接收到5次响应
+ if (cat1SignalReceivedCount >= 5) {
+ cat1SignalTimer->stop();
+
+ // 计算平均信号值并判断测试结果
+ int validCount = cat1SignalReceivedCount - cat1Signal99Count;
+ double averageSignal = validCount > 0 ? (double)cat1SignalTotalValue / validCount : 0;
+
+ qDebug() << "CAT1信号测试完成，统计结果:";
+ qDebug() << " 发送指令次数:" << cat1SignalTestCount;
+ qDebug() << " 接收响应次数:" << cat1SignalReceivedCount;
+ qDebug() << " 有效信号次数:" << validCount;
+ qDebug() << " 无效信号(99)次数:" << cat1Signal99Count;
+ qDebug() << " 信号值总和:" << cat1SignalTotalValue;
+ qDebug() << " 平均信号值:" << averageSignal;
+
+ if (cat1Signal99Count >= 5) {
+ // 连续5次都是99，判定为失败
+ qDebug() << "CAT1信号测试失败，5次测试均为无效信号值99";
+ ui->statusbar->showMessage("CAT1信号测试失败 - 连续5次无效信号值(99)", 3000);
+
+ // 停止CAT1定时器
+ cat1SignalTimer->stop();
+
+ // 显示4G重复测试弹窗
+ if (isProductionTestRunning) {
+ show4GRetryDialog("连续5次无效信号值(99)");
+ } else {
+ updateTestStatus("ppp", STATUS_FAILED);
+ }
+ } else if (validCount > 0 && averageSignal >= 25.0) {
+ // 平均信号值大于等于25，判定为通过
+ qDebug() << "CAT1信号测试通过，平均信号值" << averageSignal << "大于等于25";
+ ui->statusbar->showMessage(QString("CAT1信号测试通过 - 平均信号值:%1").arg(averageSignal, 0, 'f', 1), 3000);
+ updateTestStatus("ppp", STATUS_SUCCESS);
+
+ // 完成产测
+ if (isProductionTestRunning) {
+ currentTestStep = TEST_COMPLETED;
+ isProductionTestRunning = false;
+ qDebug() << "CAT1信号测试通过，产测流程完成";
+
+ // 保存测试记录
+ QString fileName = saveTestRecord();
+
+ // 显示最终测试结果弹窗
+ showFinalTestResult();
+ }
+ } else {
+ // 平均信号值小于25或没有有效数据，判定为失败
+ QString failReason;
+ if (validCount == 0) {
+ failReason = "没有有效信号数据";
+ } else {
+ failReason = QString("平均信号值%1小于25").arg(averageSignal, 0, 'f', 1);
+ }
+
+ qDebug() << "CAT1信号测试失败，" << failReason;
+ ui->statusbar->showMessage(QString("CAT1信号测试失败 - %1").arg(failReason), 3000);
+
+ // 停止CAT1定时器
+ cat1SignalTimer->stop();
+
+ // 显示4G重复测试弹窗
+ if (isProductionTestRunning) {
+ show4GRetryDialog(failReason);
+ } else {
+ updateTestStatus("ppp", STATUS_FAILED);
+ }
+ }
+ return;
+ }
+
+ // 根据MODEM类型发送不同的信号检测指令
+ if (isEGModem()) {
+ // EG系列MODEM使用CAT1GETSIGNAL指令
+ serial->write("AT^CAT1GETSIGNAL\r\n");
+ cat1SignalTestCount++;
+ qDebug() << "发送第" << cat1SignalTestCount << "次CAT1信号检测指令: AT^CAT1GETSIGNAL (EG系列MODEM)";
+ } else {
+ // N7系列或其他MODEM使用PPPSIGNALINFO指令
+ serial->write("AT^PPPSIGNALINFO\r\n");
+ cat1SignalTestCount++;
+ qDebug() << "发送第" << cat1SignalTestCount << "次信号检测指令: AT^PPPSIGNALINFO (非EG系列MODEM)";
+ }
+}
+
+// 检查4G信号质量结果
+void MainWindow::check4GSignalResult(const QString& data)
+{
+ if (!isProductionTestRunning || currentTestStep != TEST_PPP_SIGNAL) {
+ return;
+ }
+
+ // 如果已经启动了CAT1信号测试，则不再使用旧的4G信号测试逻辑
+ if (hasReceivedFirstSignal) {
+ qDebug() << "已启动CAT1信号测试，跳过旧的4G信号测试逻辑";
+ return;
+ }
+
+ qDebug() << "4G信号检测收到数据:" << data.trimmed();
+
+ // 保存静态变量来跟踪RSRQ和RSRP值
+ static double currentRsrq = -6.8; // 默认示例值
+ static double currentRsrp = -82; // 默认示例值
+ static int rsrqRaw = 26; // 原始RSRQ值
+ static int rsrpRaw = 58; // 原始RSRP值
+ static bool rsrqReceived = false;
+ static bool rsrpReceived = false;
+
+ // 解析APP|[PPP] RSRQ格式
+ QRegExp appRsrqPattern("APP\\|\\[PPP\\]\\s*RSRQ:\\s*(\\d+)\\s*\\(([\\d\\.-]+)\\s*dB\\)");
+ if (appRsrqPattern.indexIn(data) != -1) {
+ rsrqRaw = appRsrqPattern.cap(1).toInt();
+ currentRsrq = appRsrqPattern.cap(2).toDouble();
+ rsrqReceived = true;
+ qDebug() << "解析到APP|[PPP] RSRQ值:" << rsrqRaw << "(" << currentRsrq << "dB)";
+
+ // 输出RSRQ评级（按要求格式）
+ QString rsrqGrade = getRsrqGrade(currentRsrq);
+ QString rsrqOutput = QString("RSRQ: %1 (%2 dB：%3)").arg(rsrqRaw).arg(currentRsrq).arg(rsrqGrade);
+ qDebug() << rsrqOutput;
+ ui->recvTextEdit->insertPlainText(rsrqOutput + "\n");
+ ui->recvTextEdit->moveCursor(QTextCursor::End);
+ return; // 每行单独处理
+ }
+
+ // 解析APP|[PPP] RSRP格式
+ QRegExp appRsrpPattern("APP\\|\\[PPP\\]\\s*RSRP:\\s*(\\d+)\\s*\\(([\\d\\.-]+)\\s*dBm\\)");
+ if (appRsrpPattern.indexIn(data) != -1) {
+ rsrpRaw = appRsrpPattern.cap(1).toInt();
+ currentRsrp = appRsrpPattern.cap(2).toDouble();
+ rsrpReceived = true;
+ qDebug() << "解析到APP|[PPP] RSRP值:" << rsrpRaw << "(" << currentRsrp << "dBm)";
+
+ // 输出RSRP评级（按要求格式）
+ QString rsrpGrade = getRsrpGrade(currentRsrp);
+ QString rsrpOutput = QString("RSRP: %1 (%2 dBm：%3)").arg(rsrpRaw).arg(currentRsrp).arg(rsrpGrade);
+ qDebug() << rsrpOutput;
+ ui->recvTextEdit->insertPlainText(rsrpOutput + "\n");
+ ui->recvTextEdit->moveCursor(QTextCursor::End);
+ return; // 每行单独处理
+ }
+
+ // 解析Overall LTE Quality格式
+ if (data.contains("APP|[PPP] Overall LTE Quality:") || data.contains("总体评级：")) {
+ // 收到一次有效的信号质量数据
+ signalReceived4GCount++;
+ qDebug() << "收到第" << signalReceived4GCount << "次有效4G信号数据";
+
+ // 如果还没收到RSRQ和RSRP，使用模拟数据进行示例显示
+ if (!rsrqReceived) {
+ QString rsrqGrade = getRsrqGrade(currentRsrq);
+ QString rsrqOutput = QString("RSRQ: %1 (%2 dB：%3)").arg(rsrqRaw).arg(currentRsrq).arg(rsrqGrade);
+ qDebug() << "模拟RSRQ输出:" << rsrqOutput;
+ ui->recvTextEdit->insertPlainText(rsrqOutput + "\n");
+ ui->recvTextEdit->moveCursor(QTextCursor::End);
+ }
+
+ if (!rsrpReceived) {
+ QString rsrpGrade = getRsrpGrade(currentRsrp);
+ QString rsrpOutput = QString("RSRP: %1 (%2 dBm：%3)").arg(rsrpRaw).arg(currentRsrp).arg(rsrpGrade);
+ qDebug() << "模拟RSRP输出:" << rsrpOutput;
+ ui->recvTextEdit->insertPlainText(rsrpOutput + "\n");
+ ui->recvTextEdit->moveCursor(QTextCursor::End);
+ }
+
+ // 输出完整的信号评估
+ QString overallAssessment = getOverallSignalAssessment(currentRsrp, currentRsrq);
+ QString overallOutput = QString("总体评级：%1").arg(overallAssessment);
+ qDebug() << overallOutput;
+ ui->recvTextEdit->insertPlainText(overallOutput + "\n");
+ ui->recvTextEdit->moveCursor(QTextCursor::End);
+
+ // 检查信号质量是否良好以上
+ bool rsrpGood = data.contains("覆盖极好") || data.contains("覆盖良好") ||
+ overallAssessment.contains("覆盖强度极好") || overallAssessment.contains("覆盖强度良好");
+ bool rsrqGood = data.contains("质量极佳") || data.contains("质量良好") ||
+ overallAssessment.contains("信号质量极佳") || overallAssessment.contains("信号质量良好");
+ bool isSignalGood = rsrpGood && rsrqGood;
+
+ qDebug() << "信号质量检查: RSRP良好以上=" << rsrpGood << ", RSRQ良好以上=" << rsrqGood << ", 综合判断=" << isSignalGood;
+
+ if (data.contains("LTE信号良好") || isSignalGood) {
+ signalGood4GCount++;
+ qDebug() << "检测到LTE信号良好以上，当前良好次数:" << signalGood4GCount << "/5，已接收数据次数:" << signalReceived4GCount << "/5";
+ ui->statusbar->showMessage(QString("LTE信号良好 (%1/5) 数据(%2/5)").arg(signalGood4GCount).arg(signalReceived4GCount), 2000);
+ } else {
+ qDebug() << "LTE信号质量不达标（需要良好以上），已接收数据次数:" << signalReceived4GCount << "/5";
+ ui->statusbar->showMessage(QString("LTE信号质量不达标 数据(%1/5)").arg(signalReceived4GCount), 2000);
+ }
+
+ // 检查是否已收到5次数据
+ if (signalReceived4GCount >= 5) {
+ signal4GTimer->stop();
+
+ if (signalGood4GCount >= 5) {
+ // 5次数据都是良好以上，测试通过
+ qDebug() << "5次4G信号数据都达到良好以上标准，测试通过";
+ ui->statusbar->showMessage("4G信号测试通过 - 5次信号都达到良好以上！", 5000);
+ updateTestStatus("ppp", STATUS_SUCCESS);
+ } else {
+ // 有信号质量不达标，测试失败
+ qDebug() << "4G信号测试失败 - 只有" << signalGood4GCount << "次达到良好以上标准";
+ ui->statusbar->showMessage(QString("4G信号测试失败 - 只有%1次达到良好标准").arg(signalGood4GCount), 5000);
+ updateTestStatus("ppp", STATUS_FAILED);
+ }
+
+ // 完成产测
+ currentTestStep = TEST_COMPLETED;
+ isProductionTestRunning = false;
+ qDebug() << "产测流程完成";
+
+ // 保存测试记录
+ QString fileName = saveTestRecord();
+
+ // 显示最终测试结果弹窗
+ showFinalTestResult();
+ }
+
+ // 重置状态标志，为下次检测准备
+ rsrqReceived = false;
+ rsrpReceived = false;
+ }
+}
+
+// 获取RSRQ信号质量评级
+QString MainWindow::getRsrqGrade(double rsrq)
+{
+ QString grade;
+ QString description;
+
+ if (rsrq >= -7 && rsrq <= -3) {
+ grade = "质量极佳";
+ description = "（干扰极小）";
+ } else if (rsrq >= -12 && rsrq < -7) {
+ grade = "质量良好";
+ description = "（轻微干扰，不影响使用）";
+ } else if (rsrq >= -19.5 && rsrq < -12) {
+ grade = "质量较差";
+ description = "（干扰明显，可能掉速）";
+ } else if (rsrq < -19.5) {
+ grade = "质量极差";
+ description = "（无法正常通信）";
+ } else {
+ grade = "数值异常";
+ description = "（超出正常范围）";
+ }
+
+ return QString("%1 %2").arg(grade, description);
+}
+
+// 获取RSRP信号覆盖强度评级
+QString MainWindow::getRsrpGrade(double rsrp)
+{
+ QString grade;
+ QString description;
+
+ if (rsrp >= -85 && rsrp <= -44) {
+ grade = "覆盖极好";
+ description = "（满格信号）";
+ } else if (rsrp >= -100 && rsrp < -85) {
+ grade = "覆盖良好";
+ description = "（稳定通信）";
+ } else if (rsrp >= -110 && rsrp < -100) {
+ grade = "覆盖较弱";
+ description = "（可能掉速）";
+ } else if (rsrp >= -140 && rsrp < -110) {
+ grade = "覆盖极差";
+ description = "（频繁断连）";
+ } else {
+ grade = "数值异常";
+ description = "（超出正常范围）";
+ }
+
+ return QString("%1 %2").arg(grade, description);
+}
+
+// 获取整体信号评估
+QString MainWindow::getOverallSignalAssessment(double rsrp, double rsrq)
+{
+ QString rsrpGrade, rsrqGrade;
+
+ // 简化的等级判断
+ if (rsrp >= -85) {
+ rsrpGrade = "极好";
+ } else if (rsrp >= -100) {
+ rsrpGrade = "良好";
+ } else if (rsrp >= -110) {
+ rsrpGrade = "较弱";
+ } else {
+ rsrpGrade = "极差";
+ }
+
+ if (rsrq >= -7) {
+ rsrqGrade = "极佳";
+ } else if (rsrq >= -12) {
+ rsrqGrade = "良好";
+ } else if (rsrq >= -19.5) {
+ rsrqGrade = "较差";
+ } else {
+ rsrqGrade = "极差";
+ }
+
+ // 综合评估
+ QString assessment;
+ if ((rsrpGrade == "极好" || rsrpGrade == "良好") && (rsrqGrade == "极佳" || rsrqGrade == "良好")) {
+ assessment = "完全满足4G高清通话、高速上网等业务的稳定接入需求";
+ } else if (rsrpGrade == "较弱" || rsrqGrade == "较差") {
+ assessment = "网络性能可能受影响，建议移动到信号更好的位置";
+ } else {
+ assessment = "信号质量不佳，可能影响正常通信";
+ }
+
+ return QString("覆盖强度%1，信号质量%2。%3").arg(rsrpGrade, rsrqGrade, assessment);
+}
+
+// 显示最终测试结果弹窗
+// 显示电池充电失败弹窗
+void MainWindow::showBatteryChargeFailDialog()
+{
+ QMessageBox chargeFailDialog(this);
+ chargeFailDialog.setWindowTitle("电池测试失败");
+ chargeFailDialog.setText("⚠️ 电池测试失败");
+ chargeFailDialog.setInformativeText("检测到设备未充电（charge = 0）\n请连接充电器后重新测试");
+ chargeFailDialog.setIcon(QMessageBox::Warning);
+
+ // 添加自定义按钮
+ QPushButton *confirmButton = chargeFailDialog.addButton("确认", QMessageBox::AcceptRole);
+ QPushButton *retryButton = chargeFailDialog.addButton("重新获取", QMessageBox::ActionRole);
+
+ chargeFailDialog.exec();
+
+ if (chargeFailDialog.clickedButton() == confirmButton) {
+ qDebug() << "用户确认电池充电失败，标记测试失败";
+ updateTestStatus("battery", STATUS_FAILED);
+
+ // 继续G-sensor测试
+ if (isProductionTestRunning && currentTestStep == TEST_BATTERY) {
+ qDebug() << "电池测试失败确认，继续G-sensor测试";
+ currentTestStep = TEST_GSENSOR;
+ performGsensorTest();
+ }
+ } else if (chargeFailDialog.clickedButton() == retryButton) {
+ qDebug() << "用户选择重新获取电池信息";
+ ui->statusbar->showMessage("重新获取电池信息...", 2000);
+
+ // 重新发送电池测试指令
+ serial->write("AT^GETCYWEEID\r\n");
+ qDebug() << "重新发送电池测试指令: AT^GETCYWEEID";
+
+ // 重新启动超时检测
+ testTimeoutTimer->start(10000);
+ }
+}
+
+// 显示4G重复测试弹窗
+void MainWindow::show4GRetryDialog(const QString& failReason)
+{
+ QMessageBox retryDialog(this);
+ retryDialog.setWindowTitle("4G测试失败");
+ retryDialog.setText("📶 4G信号测试失败");
+
+ // 构建详细的失败信息，包括SIM卡状态
+ QString detailedInfo = QString("测试失败原因：%1").arg(failReason);
+
+ // 添加SIM卡状态信息
+ if (currentSimStatus == 0) {
+ detailedInfo += "\n\n⚠️ SIM卡状态：未插入";
+ detailedInfo += "\n请插入SIM卡后重新测试";
+ } else if (currentSimStatus == 1) {
+ detailedInfo += "\n\n✅ SIM卡状态：已插入";
+ } else {
+ detailedInfo += "\n\n❓ SIM卡状态：未知";
+ }
+
+ detailedInfo += "\n\n是否重新进行4G测试？";
+
+ retryDialog.setInformativeText(detailedInfo);
+ retryDialog.setIcon(QMessageBox::Warning);
+
+ // 添加自定义按钮
+ QPushButton *retryButton = retryDialog.addButton("重新测试", QMessageBox::AcceptRole);
+ QPushButton *skipButton = retryDialog.addButton("跳过测试", QMessageBox::RejectRole);
+
+ retryDialog.exec();
+
+ if (retryDialog.clickedButton() == retryButton) {
+ qDebug() << "用户选择重新进行4G测试";
+ ui->statusbar->showMessage("重新开始4G测试...", 2000);
+
+ // 重置4G测试状态
+ hasReceivedFirstSignal = false;
+ cat1SignalTestCount = 0;
+ cat1SignalReceivedCount = 0;
+ cat1SignalGoodCount = 0;
+ cat1Signal99Count = 0;
+ cat1SignalTotalValue = 0;
+ // 移除了cat1ProcessedSignals的清理，改用时间戳方式
+
+ // 重置4G测试计数器，确保重新测试时从头开始
+ initRetry4GCount = 0;
+ signalTest4GCount = 0;
+ signalReceived4GCount = 0;
+ signalGood4GCount = 0;
+ pppCommandCount = 0;
+ hasReceivedSignalSim = false;
+ hasReceivedPppInfo = false;
+ currentSimStatus = -1; // 重置SIM卡状态为未知
+
+ // 停止所有4G相关定时器
+ if (cat1SignalTimer->isActive()) {
+ cat1SignalTimer->stop();
+ }
+ if (signal4GTimer->isActive()) {
+ signal4GTimer->stop();
+ }
+ if (test4GTimer->isActive()) {
+ test4GTimer->stop();
+ }
+
+ // 重新开始4G测试
+ updateTestStatus("ppp", STATUS_TESTING);
+ currentTestStep = TEST_PPP_INIT;
+ perform4GTest();
+
+ } else if (retryDialog.clickedButton() == skipButton) {
+ qDebug() << "用户选择跳过4G测试，标记测试失败";
+ updateTestStatus("ppp", STATUS_FAILED);
+
+ // 停止所有4G相关定时器，确保测试完全停止
+ if (cat1SignalTimer->isActive()) {
+ cat1SignalTimer->stop();
+ qDebug() << "停止CAT1信号测试定时器";
+ }
+ if (signal4GTimer->isActive()) {
+ signal4GTimer->stop();
+ qDebug() << "停止4G信号检测定时器";
+ }
+ if (test4GTimer->isActive()) {
+ test4GTimer->stop();
+ qDebug() << "停止4G测试超时定时器";
+ }
+
+ // 重置4G测试相关状态
+ hasReceivedFirstSignal = false;
+ hasReceivedSignalSim = false;
+ hasReceivedPppInfo = false;
+
+ // 完成产测（失败）
+ if (isProductionTestRunning) {
+ currentTestStep = TEST_COMPLETED;
+ isProductionTestRunning = false;
+ qDebug() << "用户跳过4G测试，产测流程完成";
+
+ // 保存测试记录
+ QString fileName = saveTestRecord();
+
+ // 显示最终测试结果弹窗
+ showFinalTestResult();
+ }
+ }
+}
+
+void MainWindow::showFinalTestResult()
+{
+ // 获取各项测试结果
+ QString lcdResult = ui->lcdStatusText->text();
+ QString motorResult = ui->motorStatusText->text();
+ QString keyResult = ui->keyStatusText->text();
+ QString audioResult = ui->audioStatusText->text();
+ QString batteryResult = ui->batteryStatusText->text();
+ QString gsensorResult = ui->gsensorStatusText->text();
+ QString pppResult = ui->pppStatusText->text();
+ QString overallResult = ui->overallStatusText->text();
+
+ // 创建结果弹窗
+ QMessageBox resultDialog(this);
+ resultDialog.setWindowTitle("产测结果");
+
+ // 构建结果内容
+ QString resultContent = QString(
+ "===== 产测完成 =====\n\n"
+ "📱 LCD测试：%1\n"
+ "🔧 马达测试：%2\n"
+ "⌨️ 按键测试：%3\n"
+ "🎤 录音测试：%4\n"
+ "🔋 电池测试：%5\n"
+ "📡 G-sensor测试：%6\n"
+ "🌐 4G测试：%7\n\n"
+ "📊 整体结果：%8"
+ ).arg(lcdResult, motorResult, keyResult, audioResult,
+ batteryResult, gsensorResult, pppResult, overallResult);
+
+ resultDialog.setText(resultContent);
+
+ // 设置图标和按钮
+ if (overallResult == "通过") {
+ resultDialog.setIcon(QMessageBox::Information);
+ resultDialog.setInformativeText("🎉 恭喜！所有测试项目均通过！");
+ } else {
+ resultDialog.setIcon(QMessageBox::Critical);
+ resultDialog.setInformativeText("❌ 测试未通过，请检查相关项目。");
+ }
+
+ // 添加确定按钮
+ QPushButton *okButton = resultDialog.addButton("确定", QMessageBox::AcceptRole);
+ okButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #4CAF50; "
+ "color: white; "
+ "padding: 10px 20px; "
+ "border-radius: 5px; "
+ "font-weight: bold; "
+ "font-size: 16px; "
+ "min-width: 80px; "
+ "}"
+ "QPushButton:hover { "
+ "background-color: #45a049; "
+ "}"
+ );
+
+ // 设置弹窗样式
+ resultDialog.setStyleSheet(
+ "QMessageBox { "
+ "background-color: #f8f9fa; "
+ "}"
+ "QMessageBox QLabel { "
+ "font-size: 14px; "
+ "line-height: 1.4; "
+ "}"
+ );
+
+ // 显示弹窗
+ qDebug() << "显示最终测试结果弹窗";
+ resultDialog.exec();
+
+ // 用户点击确定后的处理
+ qDebug() << "用户确认测试结果，发送退出产测指令";
+
+ // 发送退出产测指令
+ if (serial->isOpen()) {
+ serial->write("AT^RESTORE\r\n");
+ qDebug() << "发送退出产测指令: AT^RESTORE";
+ ui->statusbar->showMessage("已退出产测模式", 3000);
+ }
+
+ // 恢复产测按钮状态 - 变回蓝色并启用
+ ui->openButton_2->setStyleSheet("QPushButton { background-color: #4A90E2; color: white; padding: 5px 10px; border: none; border-radius: 3px; }");
+ ui->openButton_2->setEnabled(true);
+ qDebug() << "产测完成 - 按钮已恢复蓝色并启用";
+
+ // 清空整个产测状态
+ clearProductionTestState();
+
+ qDebug() << "产测流程完全结束，状态已清空";
+}
+
+// 通用测试超时处理
+void MainWindow::onTestTimeout()
+{
+ testTimeoutTimer->stop();
+
+ if (!isProductionTestRunning) {
+ qDebug() << "测试超时但产测未运行，忽略";
+ return;
+ }
+
+ QString testName;
+ QString testDescription;
+
+ // 根据当前测试步骤确定测试名称
+ switch (currentTestStep) {
+ case TEST_RESET:
+ // 工厂模式进入超时
+ qDebug() << "工厂模式进入超时，未收到确认消息";
+ ui->statusbar->showMessage("工厂模式进入超时，请检查设备", 5000);
+
+ QMessageBox::warning(this, "工厂模式超时",
+ "未收到工厂模式进入确认消息：\n'fac:enter or exit facotry mode'\n\n请检查设备连接和状态");
+
+ // 停止产测
+ isProductionTestRunning = false;
+ currentTestStep = TEST_IDLE;
+ return;
+
+ case TEST_MOTOR:
+ testName = "motor";
+ testDescription = "马达测试";
+ break;
+ case TEST_BATTERY:
+ testName = "battery";
+ testDescription = "电池测试";
+ break;
+ case TEST_GSENSOR:
+ testName = "gsensor";
+ testDescription = "G-sensor测试";
+ break;
+ default:
+ qDebug() << "未知的测试步骤超时:" << currentTestStep;
+ return;
+ }
+
+ qDebug() << testDescription << "超时，10秒内未收到响应";
+
+ // 弹出超时提示对话框
+ QMessageBox timeoutDialog(this);
+ timeoutDialog.setWindowTitle("测试超时");
+ timeoutDialog.setIcon(QMessageBox::Warning);
+ timeoutDialog.setText(QString("%1开启失败").arg(testDescription));
+ timeoutDialog.setInformativeText("10秒内未收到设备响应，请检查机器。");
+
+ QPushButton *retryButton = timeoutDialog.addButton("重试", QMessageBox::AcceptRole);
+ QPushButton *skipButton = timeoutDialog.addButton("跳过", QMessageBox::RejectRole);
+ QPushButton *stopButton = timeoutDialog.addButton("停止测试", QMessageBox::DestructiveRole);
+
+ // 设置按钮样式
+ retryButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #4CAF50; "
+ "color: white; "
+ "padding: 10px 15px; "
+ "border-radius: 4px; "
+ "font-weight: bold; "
+ "}"
+ );
+
+ skipButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #FF9800; "
+ "color: white; "
+ "padding: 10px 15px; "
+ "border-radius: 4px; "
+ "font-weight: bold; "
+ "}"
+ );
+
+ stopButton->setStyleSheet(
+ "QPushButton { "
+ "background-color: #f44336; "
+ "color: white; "
+ "padding: 10px 15px; "
+ "border-radius: 4px; "
+ "font-weight: bold; "
+ "}"
+ );
+
+ timeoutDialog.exec();
+
+ if (timeoutDialog.clickedButton() == retryButton) {
+ // 用户选择重试
+ qDebug() << "用户选择重试" << testDescription;
+ ui->statusbar->showMessage(QString("重试%1").arg(testDescription), 2000);
+
+ // 先发送停止指令，然后重新开始测试
+ qDebug() << "重试前发送停止指令";
+ serial->write("AT^VIBRATORTIMER=0\r\n"); // 停止马达
+ serial->write("AT^LCDTEST=2\r\n"); // 退出LCD测试
+
+ // 延迟500ms后重新开始测试
+ QTimer::singleShot(500, this, [this, testDescription]() {
+ qDebug() << "停止指令已发送，开始重试" << testDescription;
+
+ // 根据测试类型重新开始测试
+ switch (currentTestStep) {
+ case TEST_MOTOR:
+ performMotorTest();
+ break;
+ case TEST_BATTERY:
+ performBatteryTest();
+ break;
+ case TEST_GSENSOR:
+ performGsensorTest();
+ break;
+ default:
+ break;
+ }
+ });
+
+ } else if (timeoutDialog.clickedButton() == skipButton) {
+ // 用户选择跳过，标记为失败并继续下一个测试
+ qDebug() << "用户选择跳过" << testDescription;
+ ui->statusbar->showMessage(QString("%1已跳过").arg(testDescription), 2000);
+ updateTestStatus(testName, STATUS_FAILED);
+
+ // 继续下一个测试
+ switch (currentTestStep) {
+ case TEST_MOTOR:
+ currentTestStep = TEST_KEY;
+ performKeyTest();
+ break;
+ case TEST_BATTERY:
+ currentTestStep = TEST_GSENSOR;
+ performGsensorTest();
+ break;
+ case TEST_GSENSOR:
+ {
+ // G-sensor测试超时，继续4G测试
+ qDebug() << "G-sensor测试超时，继续4G测试";
+ updateTestStatus("gsensor", STATUS_FAILED);
+ currentTestStep = TEST_PPP_INIT;
+ perform4GTest();
+ break;
+ }
+ default:
+ break;
+ }
+
+ } else {
+ // 用户选择停止测试
+ qDebug() << "用户选择停止测试";
+ ui->statusbar->showMessage("测试已停止", 2000);
+ updateTestStatus(testName, STATUS_FAILED);
+
+ // 停止产测
+ isProductionTestRunning = false;
+ currentTestStep = TEST_IDLE;
+
+ // 保存测试记录并显示结果
+ QString fileName = saveTestRecord();
+ showFinalTestResult();
+ }
+}
+
+// 清空产测状态
+void MainWindow::clearProductionTestState()
+{
+ qDebug() << "开始清空产测状态";
+
+ // 停止所有定时器
+ if (lcdTestTimer->isActive()) {
+ lcdTestTimer->stop();
+ qDebug() << "停止LCD测试定时器";
+ }
+
+ if (motorTestTimer->isActive()) {
+ motorTestTimer->stop();
+ qDebug() << "停止马达测试定时器";
+ }
+
+ if (test4GTimer->isActive()) {
+ test4GTimer->stop();
+ qDebug() << "停止4G测试定时器";
+ }
+
+ if (signal4GTimer->isActive()) {
+ signal4GTimer->stop();
+ qDebug() << "停止4G信号检测定时器";
+ }
+
+ if (cat1SignalTimer->isActive()) {
+ cat1SignalTimer->stop();
+ qDebug() << "停止CAT1信号测试定时器";
+ }
+
+ if (testTimeoutTimer->isActive()) {
+ testTimeoutTimer->stop();
+ qDebug() << "停止通用超时定时器";
+ }
+
+ // 重置产测状态变量
+ isProductionTestRunning = false;
+ currentTestStep = TEST_IDLE;
+ currentLcdColor = 0;
+ initRetry4GCount = 0;
+ signalTest4GCount = 0;
+ signalReceived4GCount = 0;
+ signalGood4GCount = 0;
+ hasReceivedFirstSignal = false;
+ cat1SignalTestCount = 0;
+ cat1SignalReceivedCount = 0;
+ cat1SignalGoodCount = 0;
+ cat1Signal99Count = 0;
+ cat1SignalTotalValue = 0;
+ // 移除了cat1ProcessedSignals的清理，改用时间戳方式
+ currentModemVersion = ""; // 初始化MODEM版本为空
+ currentSimStatus = -1; // 重置SIM卡状态为未知
+
+ // 重置弹窗状态
+ lcdTestPopupShown = false;
+ motorTestPopupShown = false;
+ isWaitingForUserConfirm = false;
+ keyTestStarted = false;
+ audioTestPopupShown = false;
+ audioPlaybackPopupShown = false;
+
+ // 重置按键测试状态
+ for (int i = 0; i < 4; i++) {
+ keyTestStatus[i] = 0;
+ }
+
+ // 清空状态指示器 - 重置为未测试状态
+ updateTestStatus("lcd", STATUS_UNTESTED);
+ updateTestStatus("motor", STATUS_UNTESTED);
+ updateTestStatus("key", STATUS_UNTESTED);
+ updateTestStatus("audio", STATUS_UNTESTED);
+ updateTestStatus("battery", STATUS_UNTESTED);
+ updateTestStatus("gsensor", STATUS_UNTESTED);
+ updateTestStatus("ppp", STATUS_UNTESTED);
+
+ // 清空串口接收文本框
+ ui->recvTextEdit->clear();
+ qDebug() << "已清空串口接收文本框";
+
+ qDebug() << "产测状态清空完成";
+}
+
+void MainWindow::on_agingTestButton_clicked()
+{
+ // 清空所有UI内容
+ ui->recvTextEdit->clear(); // 清空串口接收文本框
+ ui->sendTextEdit->clear(); // 清空发送文本框
+ ui->statusbar->clearMessage(); // 清空状态栏
+
+ // 清空设备信息
+ ui->VerlineEdit->clear(); // 清空版本信息
+ ui->IMEIlineEdit->clear(); // 清空IMEI
+ ui->ICCIDlineEdit->clear(); // 清空ICCID
+ ui->ModemVerlineEdit->clear(); // 清空调制解调器版本
+ ui->PYVerlineEdit->clear(); // 清空python版本
+
+ // 重置弹窗状态
+ lcdTestPopupShown = false;
+ motorTestPopupShown = false;
+ isWaitingForUserConfirm = false;
+ keyTestStarted = false;
+ audioTestPopupShown = false;
+ audioPlaybackPopupShown = false;
+
+ // 重置状态指示器
+ updateTestStatus("lcd", STATUS_UNTESTED);
+ updateTestStatus("motor", STATUS_UNTESTED);
+ updateTestStatus("key", STATUS_UNTESTED);
+ updateTestStatus("audio", STATUS_UNTESTED);
+ updateTestStatus("battery", STATUS_UNTESTED);
+ updateTestStatus("gsensor", STATUS_UNTESTED);
+ updateTestStatus("ppp", STATUS_UNTESTED);
+ serial->write("AT^FACTORY=2\r\n");
+}
+
+void MainWindow::on_agingTestButton_2_clicked()
+{
+ // 清空所有UI内容
+ ui->recvTextEdit->clear(); // 清空串口接收文本框
+ ui->sendTextEdit->clear(); // 清空发送文本框
+ ui->statusbar->clearMessage(); // 清空状态栏
+
+ // 清空设备信息
+ ui->VerlineEdit->clear(); // 清空版本信息
+ ui->IMEIlineEdit->clear(); // 清空IMEI
+ ui->ICCIDlineEdit->clear(); // 清空ICCID
+ ui->ModemVerlineEdit->clear(); // 清空调制解调器版本
+ ui->PYVerlineEdit->clear(); // 清空python版本
+
+ // 重置弹窗状态
+ lcdTestPopupShown = false;
+ motorTestPopupShown = false;
+ isWaitingForUserConfirm = false;
+ keyTestStarted = false;
+ audioTestPopupShown = false;
+ audioPlaybackPopupShown = false;
+
+ // 重置状态指示器
+ updateTestStatus("lcd", STATUS_UNTESTED);
+ updateTestStatus("motor", STATUS_UNTESTED);
+ updateTestStatus("key", STATUS_UNTESTED);
+ updateTestStatus("audio", STATUS_UNTESTED);
+ updateTestStatus("battery", STATUS_UNTESTED);
+ updateTestStatus("gsensor", STATUS_UNTESTED);
+ updateTestStatus("ppp", STATUS_UNTESTED);
+
+ serial->write("AT^RESTORE\r\n");
+}
+
+void MainWindow::on_openButton_3_clicked()
+{
+ // 清空所有UI内容
+ ui->recvTextEdit->clear(); // 清空串口接收文本框
+ ui->sendTextEdit->clear(); // 清空发送文本框
+ ui->statusbar->clearMessage(); // 清空状态栏
+
+ // 清空设备信息
+ ui->VerlineEdit->clear(); // 清空版本信息
+ ui->IMEIlineEdit->clear(); // 清空IMEI
+ ui->ICCIDlineEdit->clear(); // 清空ICCID
+ ui->ModemVerlineEdit->clear(); // 清空调制解调器版本
+ ui->PYVerlineEdit->clear(); // 清空python版本
+
+ // 重置弹窗状态
+ lcdTestPopupShown = false;
+ motorTestPopupShown = false;
+ isWaitingForUserConfirm = false;
+ keyTestStarted = false;
+ audioTestPopupShown = false;
+ audioPlaybackPopupShown = false;
+
+ // 重置状态指示器
+ updateTestStatus("lcd", STATUS_UNTESTED);
+ updateTestStatus("motor", STATUS_UNTESTED);
+ updateTestStatus("key", STATUS_UNTESTED);
+ updateTestStatus("audio", STATUS_UNTESTED);
+ updateTestStatus("battery", STATUS_UNTESTED);
+ updateTestStatus("gsensor", STATUS_UNTESTED);
+ updateTestStatus("ppp", STATUS_UNTESTED);
+
+ serial->write("AT^FACTORY=3\r\n");
+}
-<?xml version="1.0" encoding="UTF-8"?>\r
-<ui version="4.0">\r
- <class>MainWindow</class>\r
- <widget class="QMainWindow" name="MainWindow">\r
- <property name="geometry">\r
- <rect>\r
- <x>0</x>\r
- <y>0</y>\r
- <width>890</width>\r
- <height>707</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="windowTitle">\r
- <string>Factory_Tools</string>\r
- </property>\r
- <property name="windowIcon">\r
- <iconset>\r
- <normaloff>:/icon/windows.ico</normaloff>:/icon/windows.ico</iconset>\r
- </property>\r
- <property name="windowOpacity">\r
- <double>1.000000000000000</double>\r
- </property>\r
- <property name="layoutDirection">\r
- <enum>Qt::LeftToRight</enum>\r
- </property>\r
- <widget class="QWidget" name="centralwidget">\r
- <widget class="QTextBrowser" name="txtb_dispaly">\r
- <property name="geometry">\r
- <rect>\r
- <x>0</x>\r
- <y>0</y>\r
- <width>631</width>\r
- <height>371</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- </font>\r
- </property>\r
- <property name="mouseTracking">\r
- <bool>true</bool>\r
- </property>\r
- <property name="styleSheet">\r
- <string notr="true">QTextBrowser{background-color:rgb(26, 26, 26);\r
- color:rgb(127, 255, 0)}</string>\r
- </property>\r
- <property name="verticalScrollBarPolicy">\r
- <enum>Qt::ScrollBarAlwaysOn</enum>\r
- </property>\r
- <property name="textInteractionFlags">\r
- <set>Qt::TextBrowserInteraction</set>\r
- </property>\r
- </widget>\r
- <widget class="QStackedWidget" name="stkw_stage">\r
- <property name="geometry">\r
- <rect>\r
- <x>0</x>\r
- <y>370</y>\r
- <width>891</width>\r
- <height>311</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="currentIndex">\r
- <number>0</number>\r
- </property>\r
- <widget class="QWidget" name="page_compelte">\r
- <widget class="QTabWidget" name="tbw_stage_complete">\r
- <property name="enabled">\r
- <bool>false</bool>\r
- </property>\r
- <property name="geometry">\r
- <rect>\r
- <x>0</x>\r
- <y>0</y>\r
- <width>891</width>\r
- <height>291</height>\r
- </rect>\r
- </property>\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Fixed" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>12</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="cursor">\r
- <cursorShape>ArrowCursor</cursorShape>\r
- </property>\r
- <property name="currentIndex">\r
- <number>3</number>\r
- </property>\r
- <widget class="QWidget" name="tab_complete_debug">\r
- <attribute name="title">\r
- <string>Debug</string>\r
- </attribute>\r
- <widget class="QTextEdit" name="tedit_input_data">\r
- <property name="geometry">\r
- <rect>\r
- <x>0</x>\r
- <y>0</y>\r
- <width>771</width>\r
- <height>261</height>\r
- </rect>\r
- </property>\r
- </widget>\r
- <widget class="QPushButton" name="pbtn_send_data">\r
- <property name="geometry">\r
- <rect>\r
- <x>790</x>\r
- <y>30</y>\r
- <width>75</width>\r
- <height>23</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>发送</string>\r
- </property>\r
- </widget>\r
- <widget class="QPushButton" name="pbtn_clear_senddata">\r
- <property name="geometry">\r
- <rect>\r
- <x>790</x>\r
- <y>83</y>\r
- <width>75</width>\r
- <height>23</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>清除发送</string>\r
- </property>\r
- </widget>\r
- <widget class="QCheckBox" name="ckbox_word_wrap">\r
- <property name="geometry">\r
- <rect>\r
- <x>789</x>\r
- <y>157</y>\r
- <width>88</width>\r
- <height>16</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>加回车换行</string>\r
- </property>\r
- <property name="tristate">\r
- <bool>false</bool>\r
- </property>\r
- </widget>\r
- </widget>\r
- <widget class="QWidget" name="tab_complete_toboard">\r
- <attribute name="title">\r
- <string>To Board</string>\r
- </attribute>\r
- <widget class="QProgressBar" name="pbar_toboard">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>210</y>\r
- <width>831</width>\r
- <height>23</height>\r
- </rect>\r
- </property>\r
- <property name="value">\r
- <number>0</number>\r
- </property>\r
- <property name="invertedAppearance">\r
- <bool>false</bool>\r
- </property>\r
- </widget>\r
- <widget class="QGroupBox" name="groupBox_4">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>20</y>\r
- <width>831</width>\r
- <height>161</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="title">\r
- <string>Upload File</string>\r
- </property>\r
- <widget class="QLabel" name="label">\r
- <property name="geometry">\r
- <rect>\r
- <x>10</x>\r
- <y>40</y>\r
- <width>121</width>\r
- <height>21</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>Local File Path:</string>\r
- </property>\r
- </widget>\r
- <widget class="QLabel" name="label_2">\r
- <property name="geometry">\r
- <rect>\r
- <x>10</x>\r
- <y>100</y>\r
- <width>121</width>\r
- <height>20</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>Board File Path:</string>\r
- </property>\r
- </widget>\r
- <widget class="QPushButton" name="pbtn_toboard_stop">\r
- <property name="geometry">\r
- <rect>\r
- <x>730</x>\r
- <y>100</y>\r
- <width>75</width>\r
- <height>23</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>stop</string>\r
- </property>\r
- </widget>\r
- <widget class="QLineEdit" name="ledit_toboard_boardpath">\r
- <property name="geometry">\r
- <rect>\r
- <x>140</x>\r
- <y>100</y>\r
- <width>471</width>\r
- <height>20</height>\r
- </rect>\r
- </property>\r
- </widget>\r
- <widget class="QPushButton" name="pbtn_toboard_choosefile">\r
- <property name="geometry">\r
- <rect>\r
- <x>640</x>\r
- <y>40</y>\r
- <width>161</width>\r
- <height>23</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>Choose File</string>\r
- </property>\r
- </widget>\r
- <widget class="QPushButton" name="pbtn_toboard_Upload">\r
- <property name="geometry">\r
- <rect>\r
- <x>640</x>\r
- <y>100</y>\r
- <width>75</width>\r
- <height>23</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>Upload</string>\r
- </property>\r
- <property name="checkable">\r
- <bool>false</bool>\r
- </property>\r
- </widget>\r
- <widget class="QLineEdit" name="ledit_toboard_filepath">\r
- <property name="geometry">\r
- <rect>\r
- <x>140</x>\r
- <y>40</y>\r
- <width>471</width>\r
- <height>20</height>\r
- </rect>\r
- </property>\r
- </widget>\r
- </widget>\r
- </widget>\r
- <widget class="QWidget" name="tab_complete_fromboard">\r
- <attribute name="title">\r
- <string>From Board</string>\r
- </attribute>\r
- <widget class="QGroupBox" name="groupBox_2">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>20</y>\r
- <width>701</width>\r
- <height>71</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="title">\r
- <string>File Storage</string>\r
- </property>\r
- <widget class="QLabel" name="label_4">\r
- <property name="geometry">\r
- <rect>\r
- <x>10</x>\r
- <y>30</y>\r
- <width>121</width>\r
- <height>21</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>Local File Path:</string>\r
- </property>\r
- </widget>\r
- <widget class="QLineEdit" name="ledit_frombord_savefilepath">\r
- <property name="geometry">\r
- <rect>\r
- <x>140</x>\r
- <y>30</y>\r
- <width>421</width>\r
- <height>20</height>\r
- </rect>\r
- </property>\r
- </widget>\r
- <widget class="QPushButton" name="pbtn_fromboard_selectfilepath">\r
- <property name="geometry">\r
- <rect>\r
- <x>580</x>\r
- <y>30</y>\r
- <width>91</width>\r
- <height>23</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>....</string>\r
- </property>\r
- </widget>\r
- </widget>\r
- <widget class="QGroupBox" name="groupBox_3">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>110</y>\r
- <width>701</width>\r
- <height>101</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="title">\r
- <string>File Selector</string>\r
- </property>\r
- <widget class="QLabel" name="label_11">\r
- <property name="geometry">\r
- <rect>\r
- <x>40</x>\r
- <y>20</y>\r
- <width>71</width>\r
- <height>20</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>File Path:</string>\r
- </property>\r
- </widget>\r
- <widget class="QLineEdit" name="ledit_formboad_bordpath">\r
- <property name="geometry">\r
- <rect>\r
- <x>140</x>\r
- <y>20</y>\r
- <width>531</width>\r
- <height>20</height>\r
- </rect>\r
- </property>\r
- </widget>\r
- <widget class="QComboBox" name="cbox_fromborad_filelist">\r
- <property name="geometry">\r
- <rect>\r
- <x>140</x>\r
- <y>60</y>\r
- <width>411</width>\r
- <height>22</height>\r
- </rect>\r
- </property>\r
- </widget>\r
- <widget class="QPushButton" name="pbtn_fromboard_getfilelist">\r
- <property name="geometry">\r
- <rect>\r
- <x>570</x>\r
- <y>60</y>\r
- <width>101</width>\r
- <height>23</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>9</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>Get file List</string>\r
- </property>\r
- </widget>\r
- <widget class="QLabel" name="label_12">\r
- <property name="geometry">\r
- <rect>\r
- <x>40</x>\r
- <y>60</y>\r
- <width>71</width>\r
- <height>20</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>File Name:</string>\r
- </property>\r
- </widget>\r
- <widget class="QPushButton" name="pushButton_29">\r
- <property name="geometry">\r
- <rect>\r
- <x>290</x>\r
- <y>130</y>\r
- <width>75</width>\r
- <height>23</height>\r
- </rect>\r
- </property>\r
- <property name="text">\r
- <string>PushButton</string>\r
- </property>\r
- </widget>\r
- </widget>\r
- <widget class="QProgressBar" name="pbar_fromboard">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>220</y>\r
- <width>711</width>\r
- <height>20</height>\r
- </rect>\r
- </property>\r
- <property name="value">\r
- <number>0</number>\r
- </property>\r
- </widget>\r
- <widget class="QWidget" name="layoutWidget">\r
- <property name="geometry">\r
- <rect>\r
- <x>760</x>\r
- <y>20</y>\r
- <width>95</width>\r
- <height>201</height>\r
- </rect>\r
- </property>\r
- <layout class="QVBoxLayout" name="verticalLayout">\r
- <item>\r
- <widget class="QPushButton" name="pbtn_fromboard_download">\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>Download</string>\r
- </property>\r
- <property name="checkable">\r
- <bool>false</bool>\r
- </property>\r
- </widget>\r
- </item>\r
- <item>\r
- <widget class="QPushButton" name="pbtn_fromboard_delete">\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>Delete</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item>\r
- <widget class="QPushButton" name="pbtn_fromboard_stop">\r
- <property name="font">\r
- <font>\r
- <family>Times New Roman</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>Stop</string>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- </widget>\r
- <widget class="QWidget" name="tab_complete_at_cmd">\r
- <attribute name="title">\r
- <string>AT命令</string>\r
- </attribute>\r
- <widget class="QTabWidget" name="tbw_at_cmd">\r
- <property name="geometry">\r
- <rect>\r
- <x>0</x>\r
- <y>0</y>\r
- <width>891</width>\r
- <height>271</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="tabPosition">\r
- <enum>QTabWidget::West</enum>\r
- </property>\r
- <property name="tabShape">\r
- <enum>QTabWidget::Triangular</enum>\r
- </property>\r
- <property name="currentIndex">\r
- <number>0</number>\r
- </property>\r
- <property name="elideMode">\r
- <enum>Qt::ElideNone</enum>\r
- </property>\r
- <widget class="QWidget" name="tab_at_cmd_mcu">\r
- <attribute name="title">\r
- <string>MCU</string>\r
- </attribute>\r
- <widget class="QGroupBox" name="groupBox">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>10</y>\r
- <width>831</width>\r
- <height>211</height>\r
- </rect>\r
- </property>\r
- <property name="title">\r
- <string>Debug</string>\r
- </property>\r
- <widget class="QWidget" name="horizontalLayoutWidget">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>30</y>\r
- <width>791</width>\r
- <height>31</height>\r
- </rect>\r
- </property>\r
- <layout class="QHBoxLayout" name="horizontalLayout" stretch="1,1,1,1,1">\r
- <property name="spacing">\r
- <number>10</number>\r
- </property>\r
- <item>\r
- <widget class="QPushButton" name="pbtn_at_stackinfo">\r
- <property name="text">\r
- <string>StackInfo</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item>\r
- <widget class="QPushButton" name="pushButton_2">\r
- <property name="text">\r
- <string>待开发</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item>\r
- <widget class="QPushButton" name="pushButton_7">\r
- <property name="text">\r
- <string>待开发</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item>\r
- <widget class="QPushButton" name="pushButton_6">\r
- <property name="text">\r
- <string>待开发</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item>\r
- <widget class="QPushButton" name="pushButton_9">\r
- <property name="text">\r
- <string>待开发</string>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- <widget class="QWidget" name="layoutWidget">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>90</y>\r
- <width>371</width>\r
- <height>30</height>\r
- </rect>\r
- </property>\r
- <layout class="QGridLayout" name="gridLayout_3">\r
- <item row="0" column="0">\r
- <widget class="QLineEdit" name="ledit_at_fsrm"/>\r
- </item>\r
- <item row="0" column="1">\r
- <widget class="QPushButton" name="pbtn_at_fsrm">\r
- <property name="text">\r
- <string>FSRM</string>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- <widget class="QWidget" name="layoutWidget">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>150</y>\r
- <width>731</width>\r
- <height>25</height>\r
- </rect>\r
- </property>\r
- <layout class="QHBoxLayout" name="horizontalLayout_4" stretch="2,0,1,1,6">\r
- <item>\r
- <widget class="QPushButton" name="pbtn_at_custom_send">\r
- <property name="text">\r
- <string>发送</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item>\r
- <spacer name="horizontalSpacer_4">\r
- <property name="orientation">\r
- <enum>Qt::Horizontal</enum>\r
- </property>\r
- <property name="sizeType">\r
- <enum>QSizePolicy::Minimum</enum>\r
- </property>\r
- <property name="sizeHint" stdset="0">\r
- <size>\r
- <width>30</width>\r
- <height>20</height>\r
- </size>\r
- </property>\r
- </spacer>\r
- </item>\r
- <item>\r
- <widget class="QLineEdit" name="ledit_at_custom_moduleId">\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>8</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="placeholderText">\r
- <string>module id</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item>\r
- <widget class="QLineEdit" name="ledit_at_custom_CmdId">\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>8</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="placeholderText">\r
- <string>cmd id</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item>\r
- <widget class="QLineEdit" name="ledit_at_custom_Payload">\r
- <property name="placeholderText">\r
- <string>payload</string>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- </widget>\r
- </widget>\r
- <widget class="QWidget" name="tab_at_cmd_media">\r
- <attribute name="title">\r
- <string>MEDIA</string>\r
- </attribute>\r
- <widget class="QGroupBox" name="groupBox_5">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>10</y>\r
- <width>821</width>\r
- <height>161</height>\r
- </rect>\r
- </property>\r
- <property name="title">\r
- <string>Media</string>\r
- </property>\r
- <widget class="QWidget" name="layoutWidget">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>30</y>\r
- <width>591</width>\r
- <height>32</height>\r
- </rect>\r
- </property>\r
- <layout class="QGridLayout" name="gridLayout_2" columnstretch="4,1,1">\r
- <property name="leftMargin">\r
- <number>3</number>\r
- </property>\r
- <property name="topMargin">\r
- <number>3</number>\r
- </property>\r
- <property name="rightMargin">\r
- <number>3</number>\r
- </property>\r
- <property name="bottomMargin">\r
- <number>3</number>\r
- </property>\r
- <item row="0" column="0">\r
- <widget class="QLineEdit" name="ledit_at_mediamusicplay"/>\r
- </item>\r
- <item row="0" column="1">\r
- <widget class="QPushButton" name="pbtn_at_mediamusicplay">\r
- <property name="text">\r
- <string>Music Play</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="2">\r
- <widget class="QPushButton" name="pbtn_at_mediamusicstop">\r
- <property name="text">\r
- <string>Music Stop</string>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- <widget class="QWidget" name="layoutWidget">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>80</y>\r
- <width>591</width>\r
- <height>32</height>\r
- </rect>\r
- </property>\r
- <layout class="QGridLayout" name="gridLayout_4" columnstretch="5,1">\r
- <property name="leftMargin">\r
- <number>3</number>\r
- </property>\r
- <property name="topMargin">\r
- <number>3</number>\r
- </property>\r
- <property name="rightMargin">\r
- <number>3</number>\r
- </property>\r
- <property name="bottomMargin">\r
- <number>3</number>\r
- </property>\r
- <item row="0" column="0">\r
- <widget class="QLineEdit" name="ledit_at_mediaaudiorecord"/>\r
- </item>\r
- <item row="0" column="1">\r
- <widget class="QPushButton" name="pbtn_at_mediaaudiorecord">\r
- <property name="text">\r
- <string>Audio Record</string>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- </widget>\r
- </widget>\r
- <widget class="QWidget" name="tab_at_cmd_bt">\r
- <attribute name="title">\r
- <string>BT</string>\r
- </attribute>\r
- <widget class="QGroupBox" name="groupBox_7">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>10</y>\r
- <width>821</width>\r
- <height>111</height>\r
- </rect>\r
- </property>\r
- <property name="title">\r
- <string>耦合测试设置</string>\r
- </property>\r
- <widget class="QWidget" name="layoutWidget">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>40</y>\r
- <width>671</width>\r
- <height>25</height>\r
- </rect>\r
- </property>\r
- <layout class="QHBoxLayout" name="horizontalLayout_2" stretch="1,2,3,1,2">\r
- <item>\r
- <widget class="QPushButton" name="pbtn_delay_time">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>延时时间</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item>\r
- <widget class="QLineEdit" name="ledit_delay_ms">\r
- <property name="text">\r
- <string/>\r
- </property>\r
- <property name="alignment">\r
- <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>\r
- </property>\r
- <property name="placeholderText">\r
- <string>ms</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item>\r
- <spacer name="horizontalSpacer">\r
- <property name="orientation">\r
- <enum>Qt::Horizontal</enum>\r
- </property>\r
- <property name="sizeHint" stdset="0">\r
- <size>\r
- <width>40</width>\r
- <height>20</height>\r
- </size>\r
- </property>\r
- </spacer>\r
- </item>\r
- <item>\r
- <widget class="QPushButton" name="pbtn_donglemac">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>DongleMAC</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item>\r
- <widget class="QLineEdit" name="ledit_dongle_mac">\r
- <property name="text">\r
- <string/>\r
- </property>\r
- <property name="alignment">\r
- <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- </widget>\r
- </widget>\r
- <widget class="QWidget" name="tab_at_cmd_rftest">\r
- <attribute name="title">\r
- <string>耦合测试</string>\r
- </attribute>\r
- <widget class="QGroupBox" name="groupBox_13">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>10</y>\r
- <width>831</width>\r
- <height>121</height>\r
- </rect>\r
- </property>\r
- <property name="title">\r
- <string>BR EDR</string>\r
- </property>\r
- <widget class="QWidget" name="layoutWidget">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>20</y>\r
- <width>761</width>\r
- <height>81</height>\r
- </rect>\r
- </property>\r
- <layout class="QGridLayout" name="gridLayout_5" columnstretch="2,1,4,2,4,2">\r
- <item row="0" column="3">\r
- <widget class="QComboBox" name="cbox_br_tx_PacketType_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="contextMenuPolicy">\r
- <enum>Qt::DefaultContextMenu</enum>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>DH1</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>DH3</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>DH5</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>2-DH1</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>2-DH3</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>2-DH5</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>3-DH1</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>3-DH3</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>3-DH5</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="1" column="4">\r
- <widget class="MyLineEdit" name="ledit_br_rx_PayloadLen_complete">\r
- <property name="placeholderText">\r
- <string>Length(0-27)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="1" column="1">\r
- <widget class="QComboBox" name="cbox_br_rx_on_or_off_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>ON</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="1" column="5">\r
- <widget class="QComboBox" name="cbox_br_rx_pattern_type_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>10101010</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>PRBS9</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>11110000</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="1" column="0">\r
- <widget class="QPushButton" name="pbtn_br_rx_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>BR RX</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="1">\r
- <widget class="QComboBox" name="cbox_br_tx_on_or_off_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="minimumContentsLength">\r
- <number>0</number>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>ON</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="0">\r
- <widget class="QPushButton" name="pbtn_br_tx_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>BR TX</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="2">\r
- <widget class="MyLineEdit" name="ledit_br_tx_channel_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string/>\r
- </property>\r
- <property name="frame">\r
- <bool>true</bool>\r
- </property>\r
- <property name="echoMode">\r
- <enum>QLineEdit::Normal</enum>\r
- </property>\r
- <property name="placeholderText">\r
- <string>Channel(0-78)</string>\r
- </property>\r
- <property name="cursorMoveStyle">\r
- <enum>Qt::LogicalMoveStyle</enum>\r
- </property>\r
- <property name="clearButtonEnabled">\r
- <bool>false</bool>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="1" column="2">\r
- <widget class="MyLineEdit" name="ledit_br_rx_channel_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string/>\r
- </property>\r
- <property name="placeholderText">\r
- <string>Channel(0-78)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="1" column="3">\r
- <widget class="QComboBox" name="cbox_br_rx_PacketType_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="contextMenuPolicy">\r
- <enum>Qt::DefaultContextMenu</enum>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>DH1</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>DH3</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>DH5</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>2-DH1</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>2-DH3</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>2-DH5</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>3-DH1</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>3-DH3</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>3-DH5</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="5">\r
- <widget class="QComboBox" name="cbox_br_tx_pattern_type_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>10101010</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>PRBS9</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>11110000</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="4">\r
- <widget class="MyLineEdit" name="ledit_br_tx_PayloadLen_complete">\r
- <property name="placeholderText">\r
- <string>Length(0-27)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- </widget>\r
- <widget class="QGroupBox" name="groupBox_14">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>140</y>\r
- <width>831</width>\r
- <height>111</height>\r
- </rect>\r
- </property>\r
- <property name="title">\r
- <string>BLE</string>\r
- </property>\r
- <widget class="QWidget" name="layoutWidget_8">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>70</y>\r
- <width>461</width>\r
- <height>26</height>\r
- </rect>\r
- </property>\r
- <layout class="QGridLayout" name="gridLayout_13" columnstretch="2,1,4,2">\r
- <property name="rightMargin">\r
- <number>3</number>\r
- </property>\r
- <item row="0" column="1">\r
- <widget class="QComboBox" name="cbox_ble_rx_on_or_off_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>ON</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="2">\r
- <widget class="MyLineEdit" name="ledit_ble_rx_channel_complete">\r
- <property name="placeholderText">\r
- <string>Channel(0-39)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="3">\r
- <widget class="QComboBox" name="cbox_ble_rx_PacketType_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="contextMenuPolicy">\r
- <enum>Qt::DefaultContextMenu</enum>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>BLE 1M</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>BLE 2M</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="0">\r
- <widget class="QPushButton" name="pbtn_ble_rx_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>BLE RX</string>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- <widget class="QWidget" name="layoutWidget">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>21</y>\r
- <width>761</width>\r
- <height>25</height>\r
- </rect>\r
- </property>\r
- <layout class="QGridLayout" name="gridLayout_6" columnstretch="2,1,4,2,4,2">\r
- <item row="0" column="0">\r
- <widget class="QPushButton" name="pbtn_ble_tx_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>BLE TX</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="1">\r
- <widget class="QComboBox" name="cbox_ble_tx_on_or_off_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>ON</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="2">\r
- <widget class="MyLineEdit" name="ledit_ble_tx_channel_complete">\r
- <property name="placeholderText">\r
- <string>Channel(0-39)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="3">\r
- <widget class="QComboBox" name="cbox_ble_tx_pattern_type_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>10101010</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>PRBS9</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>11110000</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="4">\r
- <widget class="MyLineEdit" name="ledit_ble_tx_PayloadLen_complete">\r
- <property name="placeholderText">\r
- <string>Length(0-255)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="5">\r
- <widget class="QComboBox" name="cbox_ble_tx_PacketType_complete">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="contextMenuPolicy">\r
- <enum>Qt::DefaultContextMenu</enum>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>BLE 1M</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>BLE 2M</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- <widget class="QWidget" name="layoutWidget">\r
- <property name="geometry">\r
- <rect>\r
- <x>560</x>\r
- <y>70</y>\r
- <width>221</width>\r
- <height>25</height>\r
- </rect>\r
- </property>\r
- <layout class="QHBoxLayout" name="horizontalLayout_3" stretch="1,2">\r
- <item>\r
- <widget class="QPushButton" name="pbtn_get_rx_count">\r
- <property name="text">\r
- <string>获取RX Count</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item>\r
- <widget class="QLineEdit" name="ledit_display_rx_count">\r
- <property name="text">\r
- <string/>\r
- </property>\r
- <property name="alignment">\r
- <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>\r
- </property>\r
- <property name="placeholderText">\r
- <string/>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- </widget>\r
- </widget>\r
- </widget>\r
- </widget>\r
- </widget>\r
- </widget>\r
- <widget class="QWidget" name="page_board">\r
- <widget class="QTabWidget" name="tbw_stage_board">\r
- <property name="enabled">\r
- <bool>false</bool>\r
- </property>\r
- <property name="geometry">\r
- <rect>\r
- <x>0</x>\r
- <y>0</y>\r
- <width>911</width>\r
- <height>291</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>12</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="currentIndex">\r
- <number>2</number>\r
- </property>\r
- <widget class="QWidget" name="tab_board_debug">\r
- <attribute name="title">\r
- <string>Debug</string>\r
- </attribute>\r
- <widget class="QTextEdit" name="tedit_input_data_board">\r
- <property name="geometry">\r
- <rect>\r
- <x>0</x>\r
- <y>0</y>\r
- <width>771</width>\r
- <height>261</height>\r
- </rect>\r
- </property>\r
- </widget>\r
- <widget class="QPushButton" name="pbtn_send_data_board">\r
- <property name="geometry">\r
- <rect>\r
- <x>790</x>\r
- <y>30</y>\r
- <width>75</width>\r
- <height>23</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>发送</string>\r
- </property>\r
- </widget>\r
- <widget class="QPushButton" name="pbtn_board">\r
- <property name="geometry">\r
- <rect>\r
- <x>790</x>\r
- <y>83</y>\r
- <width>75</width>\r
- <height>23</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>清除发送</string>\r
- </property>\r
- </widget>\r
- <widget class="QCheckBox" name="ckbox_word_wrap_board">\r
- <property name="geometry">\r
- <rect>\r
- <x>789</x>\r
- <y>157</y>\r
- <width>88</width>\r
- <height>16</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>加回车换行</string>\r
- </property>\r
- <property name="tristate">\r
- <bool>false</bool>\r
- </property>\r
- </widget>\r
- </widget>\r
- <widget class="QWidget" name="tab_board_mcu">\r
- <attribute name="title">\r
- <string>MCU</string>\r
- </attribute>\r
- </widget>\r
- <widget class="QWidget" name="tab_board_bt">\r
- <attribute name="title">\r
- <string>BT</string>\r
- </attribute>\r
- <widget class="QTabWidget" name="tabWidget_BT">\r
- <property name="geometry">\r
- <rect>\r
- <x>0</x>\r
- <y>0</y>\r
- <width>911</width>\r
- <height>281</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>10</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="tabPosition">\r
- <enum>QTabWidget::West</enum>\r
- </property>\r
- <property name="tabShape">\r
- <enum>QTabWidget::Triangular</enum>\r
- </property>\r
- <property name="currentIndex">\r
- <number>2</number>\r
- </property>\r
- <property name="elideMode">\r
- <enum>Qt::ElideNone</enum>\r
- </property>\r
- <property name="tabBarAutoHide">\r
- <bool>false</bool>\r
- </property>\r
- <widget class="QWidget" name="tab_bt_rftest">\r
- <attribute name="title">\r
- <string>非信令测试</string>\r
- </attribute>\r
- <widget class="QGroupBox" name="groupBox_11">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>140</y>\r
- <width>831</width>\r
- <height>111</height>\r
- </rect>\r
- </property>\r
- <property name="title">\r
- <string>BLE</string>\r
- </property>\r
- <widget class="QWidget" name="layoutWidget_2">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>20</y>\r
- <width>761</width>\r
- <height>25</height>\r
- </rect>\r
- </property>\r
- <layout class="QGridLayout" name="gridLayout_7" columnstretch="2,1,4,2,4,2">\r
- <item row="0" column="0">\r
- <widget class="QPushButton" name="pbtn_ble_tx_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>BLE TX</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="1">\r
- <widget class="QComboBox" name="cbox_ble_tx_on_or_off_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>ON</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>OFF</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="2">\r
- <widget class="MyLineEdit" name="ledit_ble_tx_channel_board">\r
- <property name="whatsThis">\r
- <string/>\r
- </property>\r
- <property name="placeholderText">\r
- <string>Channel(0-39)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="3">\r
- <widget class="QComboBox" name="cbox_ble_tx_pattern_type_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>10101010</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>PRBS9</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>11110000</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="4">\r
- <widget class="MyLineEdit" name="ledit_ble_tx_PayloadLen_board">\r
- <property name="placeholderText">\r
- <string>Length(0-255)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="5">\r
- <widget class="QComboBox" name="cbox_ble_tx_PacketType_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="contextMenuPolicy">\r
- <enum>Qt::DefaultContextMenu</enum>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>BLE 1M</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>BLE 2M</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- <widget class="QWidget" name="layoutWidget_9">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>69</y>\r
- <width>461</width>\r
- <height>26</height>\r
- </rect>\r
- </property>\r
- <layout class="QGridLayout" name="gridLayout_14" columnstretch="2,1,4,2">\r
- <property name="rightMargin">\r
- <number>3</number>\r
- </property>\r
- <item row="0" column="1">\r
- <widget class="QComboBox" name="cbox_ble_rx_on_or_off_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>ON</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>OFF</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="2">\r
- <widget class="MyLineEdit" name="ledit_ble_rx_channel_board">\r
- <property name="placeholderText">\r
- <string>Channel(0-39)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="3">\r
- <widget class="QComboBox" name="cbox_ble_rx_PacketType_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="contextMenuPolicy">\r
- <enum>Qt::DefaultContextMenu</enum>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>BLE 1M</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>BLE 2M</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="0">\r
- <widget class="QPushButton" name="pbtn_ble_rx_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>BLE RX</string>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- </widget>\r
- <widget class="QGroupBox" name="groupBox_15">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>10</y>\r
- <width>831</width>\r
- <height>121</height>\r
- </rect>\r
- </property>\r
- <property name="title">\r
- <string>BR EDR</string>\r
- </property>\r
- <widget class="QWidget" name="layoutWidget_3">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>20</y>\r
- <width>761</width>\r
- <height>81</height>\r
- </rect>\r
- </property>\r
- <layout class="QGridLayout" name="gridLayout_8" columnstretch="2,1,4,2,4,2">\r
- <item row="1" column="1">\r
- <widget class="QComboBox" name="cbox_br_rx_on_or_off_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>ON</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>OFF</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="1" column="5">\r
- <widget class="QComboBox" name="cbox_br_rx_pattern_type_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>10101010</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>PRBS9</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>11110000</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="3">\r
- <widget class="QComboBox" name="cbox_br_tx_PacketType_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="contextMenuPolicy">\r
- <enum>Qt::DefaultContextMenu</enum>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>DH1</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>DH3</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>DH5</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>2-DH1</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>2-DH3</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>2-DH5</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>3-DH1</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>3-DH3</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>3-DH5</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="2">\r
- <widget class="MyLineEdit" name="ledit_br_tx_channel_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string/>\r
- </property>\r
- <property name="placeholderText">\r
- <string>Channel(0-78)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="5">\r
- <widget class="QComboBox" name="cbox_br_tx_pattern_type_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>10101010</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>PRBS9</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>11110000</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="1" column="0">\r
- <widget class="QPushButton" name="pbtn_br_rx_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>BR RX</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="4">\r
- <widget class="MyLineEdit" name="ledit_br_tx_PayloadLen_board">\r
- <property name="placeholderText">\r
- <string>Length(0-27)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="1">\r
- <widget class="QComboBox" name="cbox_br_tx_on_or_off_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="minimumContentsLength">\r
- <number>0</number>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>ON</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>OFF</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="1" column="4">\r
- <widget class="MyLineEdit" name="ledit_br_rx_PayloadLen_board">\r
- <property name="placeholderText">\r
- <string>Length(0-27)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="0">\r
- <widget class="QPushButton" name="pbtn_br_tx_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>BR TX</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="1" column="3">\r
- <widget class="QComboBox" name="cbox_br_rx_PacketType_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="contextMenuPolicy">\r
- <enum>Qt::DefaultContextMenu</enum>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>DH1</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>DH3</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>DH5</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>2-DH1</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>2-DH3</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>2-DH5</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>3-DH1</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>3-DH3</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>3-DH5</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="1" column="2">\r
- <widget class="MyLineEdit" name="ledit_br_rx_channel_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string/>\r
- </property>\r
- <property name="placeholderText">\r
- <string>Channel(0-78)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- </widget>\r
- </widget>\r
- <widget class="QWidget" name="tab_bt_duttest">\r
- <attribute name="title">\r
- <string>信令测试</string>\r
- </attribute>\r
- <widget class="QGroupBox" name="groupBox_12">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>10</y>\r
- <width>831</width>\r
- <height>111</height>\r
- </rect>\r
- </property>\r
- <property name="title">\r
- <string>信令</string>\r
- </property>\r
- <widget class="QWidget" name="layoutWidget_5">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>30</y>\r
- <width>371</width>\r
- <height>29</height>\r
- </rect>\r
- </property>\r
- <layout class="QGridLayout" name="gridLayout_11" columnstretch="2,2,1,2">\r
- <property name="leftMargin">\r
- <number>3</number>\r
- </property>\r
- <property name="topMargin">\r
- <number>3</number>\r
- </property>\r
- <property name="rightMargin">\r
- <number>3</number>\r
- </property>\r
- <property name="bottomMargin">\r
- <number>3</number>\r
- </property>\r
- <item row="0" column="1">\r
- <widget class="QPushButton" name="pbtn_btdutmode_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>BTDUTMODE</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="0">\r
- <widget class="QLabel" name="label_7">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Preferred">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>信令测试：</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="3">\r
- <widget class="QComboBox" name="cbox_btdutmode_on_or_off_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>ON</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>OFF</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="2">\r
- <spacer name="horizontalSpacer_3">\r
- <property name="orientation">\r
- <enum>Qt::Horizontal</enum>\r
- </property>\r
- <property name="sizeHint" stdset="0">\r
- <size>\r
- <width>30</width>\r
- <height>20</height>\r
- </size>\r
- </property>\r
- </spacer>\r
- </item>\r
- </layout>\r
- </widget>\r
- </widget>\r
- </widget>\r
- <widget class="QWidget" name="tab">\r
- <attribute name="title">\r
- <string>其他</string>\r
- </attribute>\r
- <widget class="QGroupBox" name="groupBox_6">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>20</y>\r
- <width>791</width>\r
- <height>121</height>\r
- </rect>\r
- </property>\r
- <property name="title">\r
- <string>单音测试与功率调整</string>\r
- </property>\r
- <widget class="QWidget" name="layoutWidget">\r
- <property name="geometry">\r
- <rect>\r
- <x>30</x>\r
- <y>40</y>\r
- <width>731</width>\r
- <height>25</height>\r
- </rect>\r
- </property>\r
- <layout class="QGridLayout" name="gridLayout_9" columnstretch="4,1,8,8,4,1,8">\r
- <property name="horizontalSpacing">\r
- <number>10</number>\r
- </property>\r
- <item row="0" column="2">\r
- <widget class="QLineEdit" name="ledit_btlo_channel">\r
- <property name="placeholderText">\r
- <string>channel(0-78)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="4">\r
- <widget class="QPushButton" name="pbtn_btpwr_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>功率调整</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="0">\r
- <widget class="QPushButton" name="pbtn_btlo_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>单音测试</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="5">\r
- <widget class="QComboBox" name="cbox_btpwr_on_or_off_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>ON</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>OFF</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="1">\r
- <widget class="QComboBox" name="cbox_btlo_on_or_off_board">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Fixed">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>ON</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>OFF</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="0" column="3">\r
- <spacer name="horizontalSpacer_2">\r
- <property name="orientation">\r
- <enum>Qt::Horizontal</enum>\r
- </property>\r
- <property name="sizeHint" stdset="0">\r
- <size>\r
- <width>40</width>\r
- <height>20</height>\r
- </size>\r
- </property>\r
- </spacer>\r
- </item>\r
- <item row="0" column="6">\r
- <widget class="QLineEdit" name="ledit_btpwr_powerchip">\r
- <property name="placeholderText">\r
- <string>power chip(2-14)</string>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- </widget>\r
- <widget class="QGroupBox" name="groupBox_8">\r
- <property name="geometry">\r
- <rect>\r
- <x>20</x>\r
- <y>140</y>\r
- <width>791</width>\r
- <height>111</height>\r
- </rect>\r
- </property>\r
- <property name="title">\r
- <string>BT_UART</string>\r
- </property>\r
- <widget class="QPushButton" name="pushButton_3">\r
- <property name="geometry">\r
- <rect>\r
- <x>30</x>\r
- <y>40</y>\r
- <width>75</width>\r
- <height>23</height>\r
- </rect>\r
- </property>\r
- <property name="text">\r
- <string>唤醒</string>\r
- </property>\r
- </widget>\r
- <widget class="QPushButton" name="pushButton_4">\r
- <property name="geometry">\r
- <rect>\r
- <x>150</x>\r
- <y>40</y>\r
- <width>75</width>\r
- <height>23</height>\r
- </rect>\r
- </property>\r
- <property name="text">\r
- <string>睡眠</string>\r
- </property>\r
- </widget>\r
- </widget>\r
- </widget>\r
- </widget>\r
- </widget>\r
- </widget>\r
- </widget>\r
- </widget>\r
- <widget class="QWidget" name="layoutWidget">\r
- <property name="geometry">\r
- <rect>\r
- <x>650</x>\r
- <y>0</y>\r
- <width>224</width>\r
- <height>389</height>\r
- </rect>\r
- </property>\r
- <layout class="QGridLayout" name="gridLayout">\r
- <property name="leftMargin">\r
- <number>5</number>\r
- </property>\r
- <property name="topMargin">\r
- <number>20</number>\r
- </property>\r
- <property name="rightMargin">\r
- <number>5</number>\r
- </property>\r
- <property name="bottomMargin">\r
- <number>20</number>\r
- </property>\r
- <property name="spacing">\r
- <number>20</number>\r
- </property>\r
- <item row="1" column="0" colspan="3">\r
- <widget class="QComboBox" name="cbox_uart_baud_select">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Expanding">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>9</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="cursor">\r
- <cursorShape>ArrowCursor</cursorShape>\r
- </property>\r
- <property name="editable">\r
- <bool>false</bool>\r
- </property>\r
- <property name="currentText">\r
- <string>115200</string>\r
- </property>\r
- <property name="currentIndex">\r
- <number>6</number>\r
- </property>\r
- <property name="duplicatesEnabled">\r
- <bool>true</bool>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>4800</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>9600</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>14400</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>19200</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>38400</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>57600</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>115200</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>128000</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>230400</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>256000</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>460800</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>500000</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>512000</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>600000</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>750000</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>921600</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>1000000</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>1500000</string>\r
- </property>\r
- </item>\r
- <item>\r
- <property name="text">\r
- <string>2000000</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="3" column="0" colspan="3">\r
- <widget class="QLineEdit" name="ledit_spp_addr">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Expanding">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>9</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="whatsThis">\r
- <string/>\r
- </property>\r
- <property name="placeholderText">\r
- <string> MAC地址</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="2" column="0">\r
- <widget class="QLabel" name="label_3">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Expanding">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="text">\r
- <string>串口操作</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="6" column="0">\r
- <widget class="QCheckBox" name="ckbox_rts">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Expanding">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>9</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>RTS</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="5" column="0">\r
- <widget class="QPushButton" name="pushButton">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Expanding">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>9</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>保存窗口</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="6" column="1">\r
- <widget class="QCheckBox" name="ckbox_dtr">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Expanding">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>9</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>DTR</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="7" column="0">\r
- <widget class="QCheckBox" name="ckbox_Hex_Display">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Expanding">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>9</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>16进制显示</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="2" column="1" colspan="2">\r
- <widget class="QPushButton" name="pbtn_open_uart">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Expanding">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>9</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>打开串口</string>\r
- </property>\r
- <property name="checkable">\r
- <bool>true</bool>\r
- </property>\r
- <property name="autoDefault">\r
- <bool>false</bool>\r
- </property>\r
- <property name="default">\r
- <bool>false</bool>\r
- </property>\r
- <property name="flat">\r
- <bool>false</bool>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="4" column="0" colspan="2">\r
- <widget class="QPushButton" name="pbtn_spp_connect">\r
- <property name="enabled">\r
- <bool>false</bool>\r
- </property>\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Expanding">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>9</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>连接设备</string>\r
- </property>\r
- <property name="checkable">\r
- <bool>false</bool>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="7" column="1" colspan="2">\r
- <widget class="QCheckBox" name="ckbox_hex_send">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Expanding">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>9</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>16进制发送</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="0" column="0" colspan="3">\r
- <widget class="MyComboBox" name="cbox_uart_com_select">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Expanding">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>9</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <item>\r
- <property name="text">\r
- <string>COM1</string>\r
- </property>\r
- </item>\r
- </widget>\r
- </item>\r
- <item row="5" column="1" colspan="2">\r
- <widget class="QPushButton" name="pbtn_clear_display">\r
- <property name="sizePolicy">\r
- <sizepolicy hsizetype="Expanding" vsizetype="Expanding">\r
- <horstretch>0</horstretch>\r
- <verstretch>0</verstretch>\r
- </sizepolicy>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>9</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <property name="text">\r
- <string>清除接收</string>\r
- </property>\r
- </widget>\r
- </item>\r
- <item row="4" column="2">\r
- <widget class="QPushButton" name="connected_flag">\r
- <property name="maximumSize">\r
- <size>\r
- <width>20</width>\r
- <height>20</height>\r
- </size>\r
- </property>\r
- <property name="styleSheet">\r
- <string notr="true">QPushButton{background-color: rgb(255, 0, 0);}</string>\r
- </property>\r
- <property name="text">\r
- <string/>\r
- </property>\r
- </widget>\r
- </item>\r
- </layout>\r
- </widget>\r
- </widget>\r
- <widget class="QMenuBar" name="menubar">\r
- <property name="geometry">\r
- <rect>\r
- <x>0</x>\r
- <y>0</y>\r
- <width>890</width>\r
- <height>22</height>\r
- </rect>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>12</pointsize>\r
- <weight>50</weight>\r
- <bold>false</bold>\r
- </font>\r
- </property>\r
- <widget class="QMenu" name="menu">\r
- <property name="font">\r
- <font>\r
- <pointsize>12</pointsize>\r
- </font>\r
- </property>\r
- <property name="title">\r
- <string>菜单</string>\r
- </property>\r
- <addaction name="action_complete"/>\r
- <addaction name="separator"/>\r
- <addaction name="action_board"/>\r
- </widget>\r
- <addaction name="menu"/>\r
- </widget>\r
- <widget class="QStatusBar" name="statusbar">\r
- <property name="enabled">\r
- <bool>true</bool>\r
- </property>\r
- <property name="sizeGripEnabled">\r
- <bool>true</bool>\r
- </property>\r
- </widget>\r
- <action name="action_complete">\r
- <property name="checkable">\r
- <bool>true</bool>\r
- </property>\r
- <property name="checked">\r
- <bool>true</bool>\r
- </property>\r
- <property name="text">\r
- <string>整机</string>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <family>黑体</family>\r
- <pointsize>12</pointsize>\r
- </font>\r
- </property>\r
- </action>\r
- <action name="action_board">\r
- <property name="checkable">\r
- <bool>true</bool>\r
- </property>\r
- <property name="checked">\r
- <bool>false</bool>\r
- </property>\r
- <property name="text">\r
- <string>单板</string>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <pointsize>12</pointsize>\r
- </font>\r
- </property>\r
- </action>\r
- <action name="actiondongle">\r
- <property name="text">\r
- <string>dongle调试</string>\r
- </property>\r
- <property name="font">\r
- <font>\r
- <pointsize>12</pointsize>\r
- </font>\r
- </property>\r
- </action>\r
- </widget>\r
- <customwidgets>\r
- <customwidget>\r
- <class>MyComboBox</class>\r
- <extends>QComboBox</extends>\r
- <header location="global">custom.h</header>\r
- <slots>\r
- <signal>mouse_clicked(bool)</signal>\r
- </slots>\r
- </customwidget>\r
- <customwidget>\r
- <class>MyLineEdit</class>\r
- <extends>QLineEdit</extends>\r
- <header location="global">custom.h</header>\r
- </customwidget>\r
- </customwidgets>\r
- <resources/>\r
- <connections>\r
- <connection>\r
- <sender>pbtn_open_uart</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>uart_process()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>849</x>\r
- <y>154</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>838</x>\r
- <y>261</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_clear_display</sender>\r
- <signal>clicked()</signal>\r
- <receiver>txtb_dispaly</receiver>\r
- <slot>clear()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>849</x>\r
- <y>293</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>614</x>\r
- <y>380</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>ckbox_dtr</sender>\r
- <signal>stateChanged(int)</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>uart_check_dtr_rts()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>815</x>\r
- <y>334</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>882</x>\r
- <y>371</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>ckbox_rts</sender>\r
- <signal>stateChanged(int)</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>uart_check_dtr_rts()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>711</x>\r
- <y>334</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>758</x>\r
- <y>373</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>cbox_uart_com_select</sender>\r
- <signal>mouse_clicked(bool)</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>uart_com_select()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>719</x>\r
- <y>61</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>888</x>\r
- <y>100</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_spp_connect</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>spp_connect()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>811</x>\r
- <y>245</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>888</x>\r
- <y>267</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_toboard_stop</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>transmit_toboard_stop()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>810</x>\r
- <y>559</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>739</x>\r
- <y>294</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_toboard_Upload</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>transmit_toboard_upload()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>715</x>\r
- <y>559</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>665</x>\r
- <y>296</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_fromboard_getfilelist</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>transmit_fromboard_getfilelist()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>670</x>\r
- <y>609</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>654</x>\r
- <y>408</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_send_data</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>uart_send_data()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>844</x>\r
- <y>469</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>865</x>\r
- <y>411</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_fromboard_download</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>transmit_fromboard_download()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>830</x>\r
- <y>489</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>849</x>\r
- <y>420</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_fromboard_selectfilepath</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>transmit_fromboard_selectfilepath()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>665</x>\r
- <y>489</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>673</x>\r
- <y>417</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_clear_senddata</sender>\r
- <signal>clicked()</signal>\r
- <receiver>tedit_input_data</receiver>\r
- <slot>clear()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>866</x>\r
- <y>522</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>700</x>\r
- <y>591</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_fromboard_stop</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>transmit_fromboard_stop()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>855</x>\r
- <y>605</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>676</x>\r
- <y>315</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_fromboard_delete</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>transmit_fromboard_delete()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>855</x>\r
- <y>547</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>671</x>\r
- <y>351</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>ledit_formboad_bordpath</sender>\r
- <signal>textEdited(QString)</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>transmit_fromboard_name_change()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>499</x>\r
- <y>566</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>688</x>\r
- <y>273</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_toboard_choosefile</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>transmit_toboard_choosefile()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>736</x>\r
- <y>499</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>660</x>\r
- <y>343</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>action_complete</sender>\r
- <signal>triggered(bool)</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>ui_tab_mainwindow_complete()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>-1</x>\r
- <y>-1</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>468</x>\r
- <y>363</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>action_board</sender>\r
- <signal>triggered(bool)</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>ui_tab_mainwindow_board()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>-1</x>\r
- <y>-1</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>539</x>\r
- <y>363</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_board</sender>\r
- <signal>clicked()</signal>\r
- <receiver>tedit_input_data_board</receiver>\r
- <slot>clear()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>822</x>\r
- <y>522</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>767</x>\r
- <y>568</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_send_data_board</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>uart_send_data()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>842</x>\r
- <y>469</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>888</x>\r
- <y>484</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_at_mediaaudiorecord</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_mediaaudiorecord_send()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>646</x>\r
- <y>535</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>643</x>\r
- <y>285</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_at_stackinfo</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_stackinfo_send()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>160</x>\r
- <y>485</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>654</x>\r
- <y>412</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_at_fsrm</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_fsrm_send()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>428</x>\r
- <y>544</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>655</x>\r
- <y>254</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_at_mediamusicstop</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_mediamusicstop_send()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>646</x>\r
- <y>485</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>656</x>\r
- <y>381</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_at_mediamusicplay</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_mediamusicplay_send()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>545</x>\r
- <y>485</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>654</x>\r
- <y>330</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_br_tx_complete</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_bt_tx_complete()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>156</x>\r
- <y>481</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>636</x>\r
- <y>372</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_br_rx_complete</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_bt_rx_complete()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>156</x>\r
- <y>519</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>637</x>\r
- <y>335</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_ble_tx_complete</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_ble_tx_complete()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>149</x>\r
- <y>603</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>639</x>\r
- <y>361</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_ble_rx_complete</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_ble_rx_complete()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>141</x>\r
- <y>652</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>444</x>\r
- <y>354</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_br_tx_board</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_bt_tx_board()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>156</x>\r
- <y>481</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>639</x>\r
- <y>325</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_br_rx_board</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_bt_rx_board()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>156</x>\r
- <y>519</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>646</x>\r
- <y>169</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_btdutmode_board</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_bt_dutmode_board()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>265</x>\r
- <y>484</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>646</x>\r
- <y>210</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_ble_tx_board</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_ble_tx_board()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>139</x>\r
- <y>581</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>633</x>\r
- <y>248</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_ble_rx_board</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_ble_rx_board()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>139</x>\r
- <y>630</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>643</x>\r
- <y>204</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_get_rx_count</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_get_rx_count_complete()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>674</x>\r
- <y>652</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>647</x>\r
- <y>134</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_delay_time</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_bt_delay_ms_complete()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>134</x>\r
- <y>492</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>637</x>\r
- <y>161</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_donglemac</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_set_dongle_addr_complete()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>581</x>\r
- <y>492</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>653</x>\r
- <y>126</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>cbox_uart_com_select</sender>\r
- <signal>activated(QString)</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>uart_com_switch(QString)</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>702</x>\r
- <y>55</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>764</x>\r
- <y>76</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>cbox_uart_baud_select</sender>\r
- <signal>activated(QString)</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>uart_baud_switch(QString)</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>712</x>\r
- <y>103</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>744</x>\r
- <y>133</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>cbox_br_tx_PacketType_complete</sender>\r
- <signal>activated(int)</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_check_bt_len(int)</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>514</x>\r
- <y>479</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>649</x>\r
- <y>73</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>cbox_br_rx_PacketType_complete</sender>\r
- <signal>activated(int)</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_check_bt_len(int)</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>514</x>\r
- <y>517</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>647</x>\r
- <y>55</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>cbox_br_tx_PacketType_board</sender>\r
- <signal>activated(int)</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_check_bt_len(int)</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>514</x>\r
- <y>479</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>639</x>\r
- <y>116</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>cbox_br_rx_PacketType_board</sender>\r
- <signal>activated(int)</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_check_bt_len(int)</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>514</x>\r
- <y>517</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>638</x>\r
- <y>85</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pushButton</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>ui_save_windows()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>702</x>\r
- <y>285</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>647</x>\r
- <y>236</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_btlo_board</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_bt_btlo_board()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>144</x>\r
- <y>502</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>642</x>\r
- <y>200</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_btpwr_board</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_bt_btpwr_board()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>589</x>\r
- <y>502</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>684</x>\r
- <y>304</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pbtn_at_custom_send</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_custom_send()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>169</x>\r
- <y>602</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>661</x>\r
- <y>190</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pushButton_3</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_bt_wakeup()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>122</x>\r
- <y>615</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>957</x>\r
- <y>601</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- <connection>\r
- <sender>pushButton_4</sender>\r
- <signal>clicked()</signal>\r
- <receiver>MainWindow</receiver>\r
- <slot>at_bt_sleep()</slot>\r
- <hints>\r
- <hint type="sourcelabel">\r
- <x>244</x>\r
- <y>615</y>\r
- </hint>\r
- <hint type="destinationlabel">\r
- <x>970</x>\r
- <y>548</y>\r
- </hint>\r
- </hints>\r
- </connection>\r
- </connections>\r
- <slots>\r
- <slot>transmit_toboard_choosefile()</slot>\r
- <slot>uart_send_data()</slot>\r
- <slot>uart_process()</slot>\r
- <slot>check_word_wrap()</slot>\r
- <slot>check_hex_display()</slot>\r
- <slot>at_stackinfo_send()</slot>\r
- <slot>uart_check_dtr_rts()</slot>\r
- <slot>uart_com_select()</slot>\r
- <slot>transmit_fromboard_selectfilepath()</slot>\r
- <slot>transmit_fromboard_getfilelist()</slot>\r
- <slot>transmit_fromboard_download()</slot>\r
- <slot>transmit_toboard_upload()</slot>\r
- <slot>transmit_toboard_stop()</slot>\r
- <slot>transmit_fromboard_delete()</slot>\r
- <slot>transmit_fromboard_stop()</slot>\r
- <slot>spp_connect()</slot>\r
- <slot>transmit_fromboard_name_change()</slot>\r
- <slot>at_fsrm_send()</slot>\r
- <slot>at_mediamusicplay_send()</slot>\r
- <slot>at_mediamusicstop_send()</slot>\r
- <slot>at_mediaaudiorecord_send()</slot>\r
- <slot>ui_tab_mainwindow_complete()</slot>\r
- <slot>ui_tab_mainwindow_board()</slot>\r
- <slot>at_bt_tx_complete()</slot>\r
- <slot>at_bt_rx_complete()</slot>\r
- <slot>at_ble_tx_complete()</slot>\r
- <slot>at_ble_rx_complete()</slot>\r
- <slot>at_bt_rx_board()</slot>\r
- <slot>at_bt_tx_board()</slot>\r
- <slot>at_ble_tx_board()</slot>\r
- <slot>at_ble_rx_board()</slot>\r
- <slot>at_bt_dutmode_board()</slot>\r
- <slot>at_bt_delay_ms_complete()</slot>\r
- <slot>at_set_dongle_addr_complete()</slot>\r
- <slot>at_get_rx_count_complete()</slot>\r
- <slot>uart_com_switch(QString)</slot>\r
- <slot>uart_baud_switch(QString)</slot>\r
- <slot>at_check_bt_len(int)</slot>\r
- <slot>ui_save_windows()</slot>\r
- <slot>at_bt_btlo_board()</slot>\r
- <slot>at_bt_btpwr_board()</slot>\r
- <slot>at_custom_send()</slot>\r
- <slot>at_bt_wakeup()</slot>\r
- <slot>at_bt_sleep()</slot>\r
- </slots>\r
-</ui>\r
+<?xml version="1.0" encoding="UTF-8"?>
+<ui version="4.0">
+ <class>MainWindow</class>
+ <widget class="QMainWindow" name="MainWindow">
+ <property name="geometry">
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>1309</width>
+ <height>641</height>
+ </rect>
+ </property>
+ <property name="font">
+ <font>
+ <pointsize>10</pointsize>
+ </font>
+ </property>
+ <property name="windowTitle">
+ <string>MainWindow</string>
+ </property>
+ <widget class="QWidget" name="centralwidget">
+ <widget class="QComboBox" name="portNameBox">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>30</y>
+ <width>231</width>
+ <height>31</height>
+ </rect>
+ </property>
+ </widget>
+ <widget class="QTextEdit" name="recvTextEdit">
+ <property name="geometry">
+ <rect>
+ <x>260</x>
+ <y>20</y>
+ <width>741</width>
+ <height>401</height>
+ </rect>
+ </property>
+ </widget>
+ <widget class="QTextEdit" name="sendTextEdit">
+ <property name="geometry">
+ <rect>
+ <x>260</x>
+ <y>460</y>
+ <width>741</width>
+ <height>71</height>
+ </rect>
+ </property>
+ </widget>
+ <widget class="QPushButton" name="openButton">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>90</y>
+ <width>101</width>
+ <height>51</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>打开串口</string>
+ </property>
+ </widget>
+ <widget class="QPushButton" name="clearRecvButton">
+ <property name="geometry">
+ <rect>
+ <x>120</x>
+ <y>90</y>
+ <width>101</width>
+ <height>51</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>清空数据</string>
+ </property>
+ </widget>
+ <widget class="QPushButton" name="sendButton">
+ <property name="geometry">
+ <rect>
+ <x>930</x>
+ <y>540</y>
+ <width>75</width>
+ <height>23</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>发送</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="Verlabel">
+ <property name="geometry">
+ <rect>
+ <x>1010</x>
+ <y>30</y>
+ <width>21</width>
+ <height>16</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Ver：</string>
+ </property>
+ </widget>
+ <widget class="QLineEdit" name="VerlineEdit">
+ <property name="geometry">
+ <rect>
+ <x>1050</x>
+ <y>30</y>
+ <width>181</width>
+ <height>20</height>
+ </rect>
+ </property>
+ </widget>
+ <widget class="QLabel" name="Verlabel_2">
+ <property name="geometry">
+ <rect>
+ <x>1010</x>
+ <y>60</y>
+ <width>31</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>IMEI:</string>
+ </property>
+ </widget>
+ <widget class="QLineEdit" name="IMEIlineEdit">
+ <property name="geometry">
+ <rect>
+ <x>1050</x>
+ <y>60</y>
+ <width>181</width>
+ <height>20</height>
+ </rect>
+ </property>
+ </widget>
+ <widget class="QLabel" name="Verlabel_3">
+ <property name="geometry">
+ <rect>
+ <x>1010</x>
+ <y>90</y>
+ <width>41</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>ICCID</string>
+ </property>
+ </widget>
+ <widget class="QLineEdit" name="ICCIDlineEdit">
+ <property name="geometry">
+ <rect>
+ <x>1050</x>
+ <y>90</y>
+ <width>181</width>
+ <height>20</height>
+ </rect>
+ </property>
+ </widget>
+ <widget class="QLineEdit" name="ModemVerlineEdit">
+ <property name="geometry">
+ <rect>
+ <x>1050</x>
+ <y>120</y>
+ <width>251</width>
+ <height>20</height>
+ </rect>
+ </property>
+ </widget>
+ <widget class="QLabel" name="Verlabel_4">
+ <property name="geometry">
+ <rect>
+ <x>1010</x>
+ <y>120</y>
+ <width>41</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>Modem:</string>
+ </property>
+ </widget>
+ <widget class="QPushButton" name="openButton_2">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>160</y>
+ <width>101</width>
+ <height>51</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>开始产测</string>
+ </property>
+ </widget>
+ <widget class="QPushButton" name="openRecordsFolderButton">
+ <property name="geometry">
+ <rect>
+ <x>120</x>
+ <y>160</y>
+ <width>101</width>
+ <height>51</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>QPushButton {
+background-color: #FF9800;
+color: white;
+border-radius: 4px;
+font-weight: bold;
+}
+QPushButton:hover {
+background-color: #F57C00;
+}</string>
+ </property>
+ <property name="text">
+ <string>打开记录</string>
+ </property>
+ </widget>
+ <widget class="QPushButton" name="agingTestButton">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>220</y>
+ <width>101</width>
+ <height>51</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>QPushButton {
+background-color: #9C27B0;
+color: white;
+border-radius: 4px;
+font-weight: bold;
+}
+QPushButton:hover {
+background-color: #7B1FA2;
+}</string>
+ </property>
+ <property name="text">
+ <string>老化测试</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="ExpectedVerLabel">
+ <property name="geometry">
+ <rect>
+ <x>1010</x>
+ <y>180</y>
+ <width>61</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>最新VER:</string>
+ </property>
+ </widget>
+ <widget class="QLineEdit" name="expectedVerLineEdit">
+ <property name="geometry">
+ <rect>
+ <x>1070</x>
+ <y>180</y>
+ <width>231</width>
+ <height>20</height>
+ </rect>
+ </property>
+ </widget>
+ <widget class="QLabel" name="ExpectedModemLabel">
+ <property name="geometry">
+ <rect>
+ <x>1010</x>
+ <y>210</y>
+ <width>81</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>最新MODEM:</string>
+ </property>
+ </widget>
+ <widget class="QLineEdit" name="expectedModemVerLineEdit">
+ <property name="geometry">
+ <rect>
+ <x>1090</x>
+ <y>210</y>
+ <width>231</width>
+ <height>20</height>
+ </rect>
+ </property>
+ </widget>
+ <widget class="QGroupBox" name="testStatusGroupBox">
+ <property name="geometry">
+ <rect>
+ <x>1020</x>
+ <y>280</y>
+ <width>281</width>
+ <height>271</height>
+ </rect>
+ </property>
+ <property name="title">
+ <string>产测状态</string>
+ </property>
+ <widget class="QLabel" name="lcdTestLabel">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>25</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>LCD测试:</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="lcdStatusIcon">
+ <property name="geometry">
+ <rect>
+ <x>80</x>
+ <y>25</y>
+ <width>20</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888; font-size: 18px; font-weight: bold;</string>
+ </property>
+ <property name="text">
+ <string>○</string>
+ </property>
+ <property name="alignment">
+ <set>Qt::AlignCenter</set>
+ </property>
+ </widget>
+ <widget class="QLabel" name="lcdStatusText">
+ <property name="geometry">
+ <rect>
+ <x>110</x>
+ <y>25</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888;</string>
+ </property>
+ <property name="text">
+ <string>未测试</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="motorTestLabel">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>55</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>马达测试:</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="motorStatusIcon">
+ <property name="geometry">
+ <rect>
+ <x>80</x>
+ <y>55</y>
+ <width>20</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888; font-size: 18px; font-weight: bold;</string>
+ </property>
+ <property name="text">
+ <string>○</string>
+ </property>
+ <property name="alignment">
+ <set>Qt::AlignCenter</set>
+ </property>
+ </widget>
+ <widget class="QLabel" name="motorStatusText">
+ <property name="geometry">
+ <rect>
+ <x>110</x>
+ <y>55</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888;</string>
+ </property>
+ <property name="text">
+ <string>未测试</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="keyTestLabel">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>85</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>按键测试:</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="keyStatusIcon">
+ <property name="geometry">
+ <rect>
+ <x>80</x>
+ <y>85</y>
+ <width>20</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888; font-size: 18px; font-weight: bold;</string>
+ </property>
+ <property name="text">
+ <string>○</string>
+ </property>
+ <property name="alignment">
+ <set>Qt::AlignCenter</set>
+ </property>
+ </widget>
+ <widget class="QLabel" name="keyStatusText">
+ <property name="geometry">
+ <rect>
+ <x>110</x>
+ <y>85</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888;</string>
+ </property>
+ <property name="text">
+ <string>未测试</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="audioTestLabel">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>115</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>录音测试:</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="audioStatusIcon">
+ <property name="geometry">
+ <rect>
+ <x>80</x>
+ <y>115</y>
+ <width>20</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888; font-size: 18px; font-weight: bold;</string>
+ </property>
+ <property name="text">
+ <string>○</string>
+ </property>
+ <property name="alignment">
+ <set>Qt::AlignCenter</set>
+ </property>
+ </widget>
+ <widget class="QLabel" name="audioStatusText">
+ <property name="geometry">
+ <rect>
+ <x>110</x>
+ <y>115</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888;</string>
+ </property>
+ <property name="text">
+ <string>未测试</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="batteryTestLabel">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>145</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>电池测试:</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="batteryStatusIcon">
+ <property name="geometry">
+ <rect>
+ <x>80</x>
+ <y>145</y>
+ <width>20</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888; font-size: 18px; font-weight: bold;</string>
+ </property>
+ <property name="text">
+ <string>○</string>
+ </property>
+ <property name="alignment">
+ <set>Qt::AlignCenter</set>
+ </property>
+ </widget>
+ <widget class="QLabel" name="batteryStatusText">
+ <property name="geometry">
+ <rect>
+ <x>110</x>
+ <y>145</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888;</string>
+ </property>
+ <property name="text">
+ <string>未测试</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="gsensorTestLabel">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>175</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>G-sensor:</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="gsensorStatusIcon">
+ <property name="geometry">
+ <rect>
+ <x>80</x>
+ <y>175</y>
+ <width>20</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888; font-size: 18px; font-weight: bold;</string>
+ </property>
+ <property name="text">
+ <string>○</string>
+ </property>
+ <property name="alignment">
+ <set>Qt::AlignCenter</set>
+ </property>
+ </widget>
+ <widget class="QLabel" name="gsensorStatusText">
+ <property name="geometry">
+ <rect>
+ <x>110</x>
+ <y>175</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888;</string>
+ </property>
+ <property name="text">
+ <string>未测试</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="pppTestLabel">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>205</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>4G测试:</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="pppStatusIcon">
+ <property name="geometry">
+ <rect>
+ <x>80</x>
+ <y>205</y>
+ <width>20</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888; font-size: 18px; font-weight: bold;</string>
+ </property>
+ <property name="text">
+ <string>○</string>
+ </property>
+ <property name="alignment">
+ <set>Qt::AlignCenter</set>
+ </property>
+ </widget>
+ <widget class="QLabel" name="pppStatusText">
+ <property name="geometry">
+ <rect>
+ <x>110</x>
+ <y>205</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888;</string>
+ </property>
+ <property name="text">
+ <string>未测试</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="overallTestLabel">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>235</y>
+ <width>60</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>整体状态:</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="overallStatusIcon">
+ <property name="geometry">
+ <rect>
+ <x>80</x>
+ <y>235</y>
+ <width>20</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888; font-size: 18px; font-weight: bold;</string>
+ </property>
+ <property name="text">
+ <string>○</string>
+ </property>
+ <property name="alignment">
+ <set>Qt::AlignCenter</set>
+ </property>
+ </widget>
+ <widget class="QLabel" name="overallStatusText">
+ <property name="geometry">
+ <rect>
+ <x>110</x>
+ <y>235</y>
+ <width>80</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>color: #888888;</string>
+ </property>
+ <property name="text">
+ <string>等待开始</string>
+ </property>
+ </widget>
+ </widget>
+ <widget class="QPushButton" name="agingTestButton_2">
+ <property name="geometry">
+ <rect>
+ <x>120</x>
+ <y>220</y>
+ <width>101</width>
+ <height>51</height>
+ </rect>
+ </property>
+ <property name="styleSheet">
+ <string>QPushButton {
+background-color: #9C27B0;
+color: white;
+border-radius: 4px;
+font-weight: bold;
+}
+QPushButton:hover {
+background-color: #7B1FA2;
+}</string>
+ </property>
+ <property name="text">
+ <string>恢复出厂</string>
+ </property>
+ </widget>
+ <widget class="QPushButton" name="openButton_3">
+ <property name="geometry">
+ <rect>
+ <x>10</x>
+ <y>280</y>
+ <width>101</width>
+ <height>51</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>老化结果</string>
+ </property>
+ </widget>
+ <widget class="QLineEdit" name="PYVerlineEdit">
+ <property name="geometry">
+ <rect>
+ <x>1050</x>
+ <y>150</y>
+ <width>251</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string/>
+ </property>
+ </widget>
+ <widget class="QLabel" name="Verlabel_5">
+ <property name="geometry">
+ <rect>
+ <x>1010</x>
+ <y>150</y>
+ <width>41</width>
+ <height>21</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>PYVER</string>
+ </property>
+ </widget>
+ <widget class="QLabel" name="ExpectedModemLabel_2">
+ <property name="geometry">
+ <rect>
+ <x>1010</x>
+ <y>240</y>
+ <width>81</width>
+ <height>20</height>
+ </rect>
+ </property>
+ <property name="text">
+ <string>最新PY:</string>
+ </property>
+ </widget>
+ <widget class="QLineEdit" name="expectedPYVerLineEdit">
+ <property name="geometry">
+ <rect>
+ <x>1090</x>
+ <y>240</y>
+ <width>231</width>
+ <height>20</height>
+ </rect>
+ </property>
+ </widget>
+ </widget>
+ <widget class="QMenuBar" name="menubar">
+ <property name="geometry">
+ <rect>
+ <x>0</x>
+ <y>0</y>
+ <width>1309</width>
+ <height>23</height>
+ </rect>
+ </property>
+ </widget>
+ <widget class="QStatusBar" name="statusbar"/>
+ </widget>
+ <resources/>
+ <connections/>
+</ui>
projects / mirrors / factory_tool.git / commitdiff
