STR_SLEEP_MODE_PROMPT_ON = 549,\r
STR_LOW_POWER_NOTIF_1 = 550,\r
STR_LOW_POWER_NOTIF_2 = 551,\r
- STR_MAX_ID = 552,\r
+ STR_CONNECTION_SUCC = 552,\r
+ STR_RETRY = 553,\r
+ STR_BTEARPHONE_CONN_FAIL_TIP = 554,\r
+ STR_FLASHLIGHT_SETTING = 555,\r
+ STR_LIGHT_COLOR = 556,\r
+ STR_FLICKER_FREQUENCY = 557,\r
+ STR_NO_FLICKER = 558,\r
+ STR_FAST_FLICKER = 559,\r
+ STR_SLOW_FLICKER = 560,\r
+ STR_BROWSING_SPECIAL_EFFECTS = 561,\r
+ STR_OVERLAY_FLOW = 562,\r
+ STR_ROLLER = 563,\r
+ STR_DIAL_BROWSING_SPECIAL_EFFECTS = 564,\r
+ STR_SET_TARGET = 565,\r
+ STR_PWUWC = 566,\r
+ STR_MAX_ID = 567,\r
}; // UIResourceTextId\r
enum FontLanguageId : uint8_t {
* @Author: luozheng 1732036298@qq.com\r
* @Date: 2024-08-05 15:20:01\r
* @LastEditors: luozheng 1732036298@qq.com\r
- * @LastEditTime: 2024-08-16 16:24:39\r
+ * @LastEditTime: 2024-09-05 16:13:55\r
* @FilePath: /FD230/code/sdk/application/wearable/fd230app/nativeui/bluetooth/include/TipsConnFailMessageView.h\r
*/\r
\r
#include "components/ui_view_group.h"\r
#include "components/ui_label.h"\r
#include "components/ui_label_ext.h"\r
-#include "components/ui_label_button.h"\r
+#include "components/ui_label_button_ext.h"\r
#include "components/ui_image_view.h"\r
#include "bts_def.h"\r
\r
void ShowUpButtonBack(void);\r
void ShowUpTipLabel(void);\r
void InitNameLabel(void);\r
- UILabel *titleLabel{nullptr};\r
- UILabel *tipLabel{nullptr};\r
- UILabel *tipTwoLabel{nullptr};\r
+ UILabelExt *titleLabel{nullptr};\r
+ UILabelExt *conn_fail_Label{nullptr};\r
+ UILabelExt *tipLabel{nullptr};\r
UILabel *bluetoothNameLabel{nullptr};\r
- UILabelButton *backButton{nullptr};\r
+ UILabelButtonExt *backButton{nullptr};\r
UIImageView *tipImg{nullptr};\r
UIViewGroup *group{nullptr};\r
};\r
/*\r
- * Copyright (c) CompanyNameMagicTag 2021-2021. All rights reserved.\r
- * Description: TipsSuccMessage view\r
- * Author:\r
- * Create: 2021-10-13\r
+ * @Author: luozheng 1732036298@qq.com\r
+ * @Date: 2024-08-05 15:20:01\r
+ * @LastEditors: luozheng 1732036298@qq.com\r
+ * @LastEditTime: 2024-09-05 11:13:11\r
+ * @FilePath: /FD230/code/sdk/application/wearable/fd230app/nativeui/bluetooth/include/TipsSuccMessageView.h\r
*/\r
#ifndef TIPS_SUCC_MESSAGE_VIEW_H\r
#define TIPS_SUCC_MESSAGE_VIEW_H\r
#include "components/ui_view_group.h"\r
#include "components/ui_label.h"\r
#include "components/ui_label_ext.h"\r
-#include "components/ui_label_button.h"\r
+#include "components/ui_label_button_ext.h"\r
#include "components/ui_image_view.h"\r
#include "bts_def.h"\r
\r
UIViewGroup *ShowUpViewInit(void);\r
void RefreshNameLabel(const bd_addr_t &bdAddr);\r
private:\r
- void ShowUpButtonBack(void);\r
- void InitNameLabel(void);\r
- UILabel *titleLabel{nullptr};\r
- UILabel *bluetoothNameLabel{nullptr};\r
- UILabelButton *backButton{nullptr};\r
+ UILabelExt *titleLabel{nullptr};\r
+ UILabelExt *bluetoothNameLabel{nullptr};\r
+ UILabelExt *conn_succ_Label{nullptr};\r
+ UILabelButtonExt *backButton{nullptr};\r
UIImageView *tipImg{nullptr};\r
UIViewGroup *group{nullptr};\r
};\r
bd_addr_t *lastAddr = BluetoothModel::GetInstance()->GetLastConnedAddr();
bool ret = bt_is_acl_connected(lastAddr);
if (ret) {
+ BluetoothModel::GetInstance()->SetTagConnectNew(false);
errcode_t retVal = gap_disconnect_remote_device(lastAddr);
WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "Disconnect LastDevice retVal = %d", retVal);
} else {
return;\r
}\r
\r
+ /*\r
+ * @brief 设置是否已经开始扫描标记\r
+ */\r
void BluetoothEarPhoneView::setScanStatus(bool value)\r
{\r
scanStart = value;\r
}\r
+ \r
+ //获取是否已经开始扫描标记\r
bool BluetoothEarPhoneView::getScanStatus(void)\r
{\r
return scanStart;\r
WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "bluetoothEarPhoneView nullptr");\r
return;\r
}\r
- bluetoothEarPhoneView->setScanStatus(false);\r
+ bluetoothEarPhoneView->setScanStatus(false);// 停止扫描标记\r
WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "Bt scan one jumpView");\r
if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERPLAYERS) {\r
JumpView *jumpView = JumpView::GetInstance();\r
WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "BtAnimatorStop");\r
}\r
\r
+//用于处理蓝牙设备发现的结果\r
void BluetoothModel::BtGapDiscoveryResultCallbakHandle(const bd_addr_t &bdAddr)\r
{\r
BluetoothCaseInfo caseInfo{};\r
#include "UiConfig.h"\r
#include "PlayersPresenter.h"\r
#include "BluetoothPresenter.h"\r
-\r
-namespace OHOS {\r
-static TipsConnFailMessageView *g_pConnFailMessageView{nullptr};\r
-TipsConnFailMessageView::TipsConnFailMessageView()\r
-{\r
- WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView::TipsConnFailMessageView");\r
- g_pConnFailMessageView = this;\r
-}\r
-\r
-TipsConnFailMessageView::~TipsConnFailMessageView()\r
-{\r
- WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView::~TipsConnFailMessageView");\r
- group->RemoveAll();\r
- delete titleLabel;\r
- titleLabel = nullptr;\r
- delete backButton;\r
- backButton = nullptr;\r
- delete group;\r
- group = nullptr;\r
- delete tipImg;\r
- tipImg = nullptr;\r
- delete tipLabel;\r
- tipLabel = nullptr;\r
- delete tipTwoLabel;\r
- tipTwoLabel = nullptr;\r
- g_pConnFailMessageView = nullptr;\r
-}\r
-\r
-TipsConnFailMessageView *TipsConnFailMessageView::GetInstance()\r
+#include "ui_resource_string.h"\r
+namespace OHOS\r
{\r
- return g_pConnFailMessageView;\r
-}\r
-\r
-void TipsConnFailMessageView::ShowUpTipLabel()\r
-{\r
- WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView::ShowUpTipLabel");\r
- if (tipLabel == nullptr) {\r
- tipLabel = new UILabel();\r
- if (tipLabel == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView tipLabel new fail");\r
- return;\r
- }\r
- tipLabel->SetPosition(0, 247, HORIZONTAL_RESOLUTION, 35); // 0:x 247:y 454:width 35:height.\r
- tipLabel->SetText("请确认该设备在通信范");\r
- tipLabel->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 30); // 30：font data\r
- tipLabel->SetStyle(STYLE_BACKGROUND_COLOR, OPA_OPAQUE);\r
- tipLabel->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER,\r
- UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
- group->Add(tipLabel);\r
+ static TipsConnFailMessageView *g_pConnFailMessageView{nullptr};\r
+ TipsConnFailMessageView::TipsConnFailMessageView()\r
+ {\r
+ WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView::TipsConnFailMessageView");\r
+ g_pConnFailMessageView = this;\r
}\r
- if (tipTwoLabel == nullptr) {\r
- tipTwoLabel = new UILabel();\r
- if (tipTwoLabel == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView tipTwoLabel new fail");\r
- return;\r
+\r
+ TipsConnFailMessageView::~TipsConnFailMessageView()\r
+ {\r
+ WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView::~TipsConnFailMessageView");\r
+ if (group)\r
+ {\r
+ group->RemoveAll();\r
+ if (titleLabel)\r
+ {\r
+ delete titleLabel;\r
+ titleLabel = nullptr;\r
+ }\r
+ if (tipImg)\r
+ {\r
+ delete tipImg;\r
+ tipImg = nullptr;\r
+ }\r
+ if (backButton)\r
+ {\r
+ delete backButton;\r
+ backButton = nullptr;\r
+ }\r
+ if (tipLabel)\r
+ {\r
+ delete tipLabel;\r
+ tipLabel = nullptr;\r
+ }\r
+ delete group;\r
+ group = nullptr;\r
}\r
- tipTwoLabel->SetPosition(0, 300, HORIZONTAL_RESOLUTION, 34); // 0:x 300:y 454:width 34:height.\r
- tipTwoLabel->SetText("围内且处于待配对状态。");\r
- tipTwoLabel->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 30); // 30：font data\r
- tipTwoLabel->SetStyle(STYLE_BACKGROUND_COLOR, OPA_OPAQUE);\r
- tipTwoLabel->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER,\r
- UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
- group->Add(tipTwoLabel);\r
+ g_pConnFailMessageView = nullptr;\r
}\r
- return;\r
-}\r
\r
-void TipsConnFailMessageView::InitNameLabel(void)\r
-{\r
- if (bluetoothNameLabel == nullptr) {\r
- bluetoothNameLabel = new UILabel();\r
- if (bluetoothNameLabel == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "bluetoothNameLabel new fail");\r
- return;\r
- }\r
- bluetoothNameLabel->SetLineBreakMode(UILabel::LINE_BREAK_MARQUEE);\r
- bluetoothNameLabel->SetPosition(60, 139, 333, 45); // 60:x 139:y 333:width 45:height\r
- bluetoothNameLabel->SetFont(DEFAULT_VECTOR_FONT_FILENAME, FONT_THIRTY_SIZE);\r
- bluetoothNameLabel->SetStyle(STYLE_BACKGROUND_COLOR, OPA_OPAQUE);\r
- bluetoothNameLabel->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER,\r
- UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
- group->Add(bluetoothNameLabel);\r
+ TipsConnFailMessageView *TipsConnFailMessageView::GetInstance()\r
+ {\r
+ return g_pConnFailMessageView;\r
}\r
-}\r
\r
-void TipsConnFailMessageView::ShowUpButtonBack()\r
-{\r
- WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView::ShowUpButtonBack");\r
- if (backButton == nullptr) {\r
- backButton = new UILabelButton();\r
- if (backButton == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView backButton new fail");\r
- return;\r
+ void TipsConnFailMessageView::ShowUpTipLabel()\r
+ {\r
+#if 0\r
+ WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView::ShowUpTipLabel");\r
+ if (tipLabel == nullptr)\r
+ {\r
+ tipLabel = new UILabel();\r
+ if (tipLabel == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView tipLabel new fail");\r
+ return;\r
+ }\r
+ tipLabel->SetPosition(0, 247, HORIZONTAL_RESOLUTION, 35); // 0:x 247:y 454:width 35:height.\r
+ tipLabel->SetText("请确认该设备在通信范");\r
+ tipLabel->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 30); // 30：font data\r
+ tipLabel->SetStyle(STYLE_BACKGROUND_COLOR, OPA_OPAQUE);\r
+ tipLabel->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER,\r
+ UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
+ group->Add(tipLabel);\r
}\r
- UIView::OnClickListener *clickListener = (UIView::OnClickListener *)OHOS::PlayersPresenter::GetInstance();\r
- UIView::OnClickListener *clickListener2 = (UIView::OnClickListener *)OHOS::BluetoothPresenter::GetInstance();\r
- if ((clickListener == nullptr) && (clickListener2 == nullptr)) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "clickListener GetInstance fail");\r
- return;\r
+ if (tipTwoLabel == nullptr)\r
+ {\r
+ tipTwoLabel = new UILabel();\r
+ if (tipTwoLabel == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView tipTwoLabel new fail");\r
+ return;\r
+ }\r
+ tipTwoLabel->SetPosition(0, 300, HORIZONTAL_RESOLUTION, 34); // 0:x 300:y 454:width 34:height.\r
+ tipTwoLabel->SetText("围内且处于待配对状态。");\r
+ tipTwoLabel->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 30); // 30：font data\r
+ tipTwoLabel->SetStyle(STYLE_BACKGROUND_COLOR, OPA_OPAQUE);\r
+ tipTwoLabel->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER,\r
+ UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
+ group->Add(tipTwoLabel);\r
}\r
- backButton->SetPosition(65, 359, 324, 101); // 65:x, 359:y, 324:width 101:height.\r
- backButton->SetText("重试");\r
- backButton->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 40); // 40：font data\r
- backButton->SetImageSrc(PNG_NEW_DEVICE, PNG_NEW_DEVICE);\r
- backButton->SetViewId(BLUETOOTH_CONN_FAIL_BACK_BUTTON);\r
- if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERPLAYERS) {\r
- backButton->SetTextColor(Color::Red());\r
- backButton->SetOnClickListener(clickListener);\r
- } else if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERSETTING) {\r
- backButton->SetTextColor(Color::Blue());\r
- backButton->SetOnClickListener(clickListener2);\r
- }\r
- group->Add(backButton);\r
+#endif\r
+ return;\r
}\r
- if (tipImg == nullptr) {\r
- tipImg = new UIImageView();\r
- if (tipImg == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView tipImg new fail");\r
- return;\r
+\r
+ UIViewGroup *TipsConnFailMessageView::ShowUpViewInit(void)\r
+ {\r
+ WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView::ShowUpViewInit");\r
+ if (group == nullptr)\r
+ {\r
+ group = new UIViewGroup();\r
+ if (group == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "group new fail");\r
+ return nullptr;\r
+ }\r
+ group->SetPosition(0, 0);\r
+ group->SetWidth(HORIZONTAL_RESOLUTION);\r
+ group->SetHeight(VERTICAL_RESOLUTION);\r
+ UIView::OnDragListener *tipsDragListener = (UIView::OnDragListener *)OHOS::PlayerOnDragListener::GetInstance();\r
+ UIView::OnDragListener *tipsDragListener2 = (UIView::OnDragListener *)OHOS::BluetoothPresenter::GetInstance();\r
+ if ((tipsDragListener == nullptr) && (tipsDragListener2 == nullptr))\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "tipsDragListener GetInstance fail");\r
+ return nullptr;\r
+ }\r
+ if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERPLAYERS)\r
+ {\r
+ group->SetOnDragListener(tipsDragListener);\r
+ }\r
+ else if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERSETTING)\r
+ {\r
+ group->SetOnDragListener(tipsDragListener2);\r
+ }\r
+ group->SetViewId(TIPS_CONN_FAIL_MESSAGE_VIEW);\r
+ group->SetDraggable(true);\r
+ group->SetTouchable(true);\r
+ /* -------------------------------------------------------------------------- */\r
+ if (titleLabel == nullptr)\r
+ {\r
+ titleLabel = new UILabelExt();\r
+ if (titleLabel == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView titleLabel new fail");\r
+ return nullptr;\r
+ }\r
+ titleLabel->SetPosition(83, 50, 300, 35);\r
+ titleLabel->SetTextId(STR_BLUETOOTH_HEADPHONES); // 蓝牙耳机\r
+ titleLabel->SetLineBreakMode(UILabel::LINE_BREAK_OSCILLATION);\r
+ titleLabel->SetStyle(STYLE_TEXT_FONT, 30);\r
+ titleLabel->SetStyle(STYLE_LINE_HEIGHT, 35);\r
+ titleLabel->SetRollSpeed(70);\r
+ titleLabel->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER, UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
+ titleLabel->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 30);\r
+ }\r
+ /* --------------------------------- tipImg --------------------------------- */\r
+ if (tipImg == nullptr)\r
+ {\r
+ tipImg = new UIImageView();\r
+ if (tipImg == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView tipImg new fail");\r
+ return nullptr;\r
+ }\r
+ tipImg->SetPosition(193, 121, 80, 80);\r
+ tipImg->SetSrc(PNG_ATTENTION_IMAGE);\r
+ }\r
+ /* --------------------------- bluetoothNameLabel --------------------------- */\r
+ if (bluetoothNameLabel == nullptr)\r
+ {\r
+ bluetoothNameLabel = new UILabelExt();\r
+ if (bluetoothNameLabel == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "bluetoothNameLabel new fail");\r
+ return nullptr;\r
+ }\r
+ bluetoothNameLabel->SetPosition(53, 235, 360, 35);\r
+ bluetoothNameLabel->SetStyle(STYLE_TEXT_FONT, 30);\r
+ bluetoothNameLabel->SetStyle(STYLE_LINE_HEIGHT, 35);\r
+ bluetoothNameLabel->SetLineBreakMode(UILabel::LINE_BREAK_OSCILLATION);\r
+ bluetoothNameLabel->SetRollSpeed(70);\r
+ bluetoothNameLabel->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 30);\r
+ bluetoothNameLabel->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER, UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
+ }\r
+ /* ----------------------------- conn_fail_Label ---------------------------- */\r
+ if (conn_fail_Label == nullptr)\r
+ {\r
+ conn_fail_Label = new UILabelExt();\r
+ if (conn_fail_Label == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView conn_fail_Label new fail");\r
+ return nullptr;\r
+ }\r
+ conn_fail_Label->SetPosition(53, bluetoothNameLabel->GetY() + bluetoothNameLabel->GetHeight(), 360, 35);\r
+ conn_fail_Label->SetTextId(STR_CONNECTION_FAIL);\r
+ conn_fail_Label->SetStyle(STYLE_TEXT_FONT, 30);\r
+ conn_fail_Label->SetStyle(STYLE_LINE_HEIGHT, 35);\r
+ conn_fail_Label->SetLineBreakMode(UILabel::LINE_BREAK_OSCILLATION);\r
+ conn_fail_Label->SetRollSpeed(70);\r
+ conn_fail_Label->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 30);\r
+ conn_fail_Label->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER, UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
+ conn_fail_Label->SetTextColor(Color::GetColorFromRGBA(0xff, 0xff, 0xff, 0x7f));\r
+ }\r
+ /* -------------------------------- tipLabel -------------------------------- */\r
+ if (tipLabel == nullptr)\r
+ {\r
+ tipLabel = new UILabelExt();\r
+ if (tipLabel == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView tipLabel new fail");\r
+ return nullptr;\r
+ }\r
+ tipLabel->SetPosition(53, conn_fail_Label->GetY() + conn_fail_Label->GetHeight(), 360, 35);\r
+ tipLabel->SetTextId(STR_CONNECTION_FAIL);\r
+ tipLabel->SetStyle(STYLE_TEXT_FONT, 30);\r
+ tipLabel->SetStyle(STYLE_LINE_HEIGHT, 35);\r
+ // tipLabel->SetText("请确认该设备在通信范围内且处于待配对状态");\r
+ tipLabel->SetTextId(STR_BTEARPHONE_CONN_FAIL_TIP);\r
+ tipLabel->SetLineBreakMode(UILabel::LINE_BREAK_OSCILLATION);\r
+ // tipLabel->SetRollSpeed(70);\r
+ tipLabel->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 30);\r
+ tipLabel->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER, UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
+ tipLabel->SetTextColor(Color::GetColorFromRGBA(0xff, 0xff, 0xff, 0x7f));\r
+ }\r
+ /* ------------------------------- backButton ------------------------------- */\r
+ if (backButton == nullptr)\r
+ {\r
+ backButton = new UILabelButtonExt();\r
+ if (backButton == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView backButton new fail");\r
+ return nullptr;\r
+ }\r
+ UIView::OnClickListener *clickListener = (UIView::OnClickListener *)OHOS::PlayersPresenter::GetInstance();\r
+ UIView::OnClickListener *clickListener2 = (UIView::OnClickListener *)OHOS::BluetoothPresenter::GetInstance();\r
+ if ((clickListener == nullptr) && (clickListener2 == nullptr))\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "clickListener GetInstance fail");\r
+ return nullptr;\r
+ }\r
+ backButton->SetPosition(0, 366, 466, 100);\r
+ backButton->SetTextId(STR_RETRY); // 重试\r
+ backButton->SetStyle(STYLE_LINE_HEIGHT, 35);\r
+ backButton->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 30);\r
+ backButton->SetImageSrc(PNG_BUTTON_466x100_IMAGE, PNG_BUTTON_466x100_IMAGE);\r
+ backButton->SetViewId(BLUETOOTH_CONN_FAIL_BACK_BUTTON);\r
+ if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERPLAYERS)\r
+ {\r
+ backButton->SetOnClickListener(clickListener);\r
+ }\r
+ else if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERSETTING)\r
+ {\r
+ backButton->SetOnClickListener(clickListener2);\r
+ }\r
+ }\r
+ group->Add(titleLabel);\r
+ group->Add(tipImg);\r
+ group->Add(bluetoothNameLabel);\r
+ group->Add(conn_fail_Label);\r
+ group->Add(tipLabel);\r
+ group->Add(backButton);\r
}\r
- tipImg->SetPosition(178, 20, 90, 90); // 178:x 20:y 90:width 90:height.\r
- tipImg->SetSrc(PNG_GANTAN);\r
- group->Add(tipImg);\r
+ return group;\r
}\r
- return;\r
-}\r
\r
-UIViewGroup *TipsConnFailMessageView::ShowUpViewInit(void)\r
-{\r
- WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView::ShowUpViewInit");\r
- if (group == nullptr) {\r
- group = new UIViewGroup();\r
- if (group == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "group new fail");\r
- return nullptr;\r
+ // 刷新设备名称\r
+ void TipsConnFailMessageView::RefreshNameLabel(const bd_addr_t &bdAddr)\r
+ {\r
+ BluetoothCaseInfo caseInfo;\r
+ (void)memcpy_s(caseInfo.addr, BD_ADDR_LEN, bdAddr.addr, BD_ADDR_LEN);\r
+ bool ret = BluetoothModel::GetInstance()->FindNameFromList(&caseInfo);\r
+ if (!ret)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView FindNameFromList fail");\r
+ return;\r
}\r
- group->SetPosition(0, 0);\r
- group->SetWidth(HORIZONTAL_RESOLUTION);\r
- group->SetHeight(VERTICAL_RESOLUTION);\r
- }\r
- if (titleLabel == nullptr) {\r
- titleLabel = new UILabel();\r
- if (titleLabel == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView titleLabel new fail");\r
- return nullptr;\r
+ if (bluetoothNameLabel == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView::RefreshNameLabel bluetoothNameLabel == nullptr");\r
+ return;\r
}\r
- titleLabel->SetPosition(0, 189, HORIZONTAL_RESOLUTION, 45); // 0:x 189:y 454:width 45:height.\r
- titleLabel->SetText("连接失败");\r
- titleLabel->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 40); // 40：font data\r
- titleLabel->SetStyle(STYLE_BACKGROUND_COLOR, OPA_OPAQUE);\r
- titleLabel->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER,\r
- UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
- group->Add(titleLabel);\r
- }\r
- ShowUpButtonBack();\r
- ShowUpTipLabel();\r
- InitNameLabel();\r
- UIView::OnDragListener *tipsDragListener = (UIView::OnDragListener *)OHOS::PlayerOnDragListener::GetInstance();\r
- UIView::OnDragListener *tipsDragListener2 = (UIView::OnDragListener *)OHOS::BluetoothPresenter::GetInstance();\r
- if ((tipsDragListener == nullptr) && (tipsDragListener2 == nullptr)) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "tipsDragListener GetInstance fail");\r
- return nullptr;\r
- }\r
- if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERPLAYERS) {\r
- group->SetOnDragListener(tipsDragListener);\r
- } else if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERSETTING) {\r
- group->SetOnDragListener(tipsDragListener2);\r
- }\r
- group->SetViewId(TIPS_CONN_FAIL_MESSAGE_VIEW);\r
- group->SetDraggable(true);\r
- group->SetTouchable(true);\r
- return group;\r
-}\r
-\r
-//刷新设备名称\r
-void TipsConnFailMessageView::RefreshNameLabel(const bd_addr_t &bdAddr)\r
-{\r
- BluetoothCaseInfo caseInfo;\r
- (void)memcpy_s(caseInfo.addr, BD_ADDR_LEN, bdAddr.addr, BD_ADDR_LEN);\r
- bool ret = BluetoothModel::GetInstance()->FindNameFromList(&caseInfo);\r
- if (!ret) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView FindNameFromList fail");\r
- return;\r
- }\r
- if (bluetoothNameLabel == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsConnFailMessageView::RefreshNameLabel bluetoothNameLabel == nullptr");\r
- return;\r
+ bluetoothNameLabel->SetText(reinterpret_cast<const char *>(caseInfo.deviceName));\r
}\r
- bluetoothNameLabel->SetText(reinterpret_cast<const char *>(caseInfo.deviceName));\r
-}\r
}
\ No newline at end of file
#include "UiConfig.h"\r
#include "PlayersPresenter.h"\r
#include "BluetoothPresenter.h"\r
-\r
-namespace OHOS {\r
-static TipsSuccMessageView *g_pSuccMessageView{nullptr};\r
-TipsSuccMessageView::TipsSuccMessageView()\r
-{\r
- WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView::TipsSuccMessageView");\r
- g_pSuccMessageView = this;\r
-}\r
-\r
-TipsSuccMessageView::~TipsSuccMessageView()\r
+#include "ui_resource_string.h"\r
+namespace OHOS\r
{\r
- WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView::~TipsSuccMessageView");\r
- group->RemoveAll();\r
- delete titleLabel;\r
- titleLabel = nullptr;\r
- delete backButton;\r
- backButton = nullptr;\r
- delete group;\r
- group = nullptr;\r
- delete tipImg;\r
- tipImg = nullptr;\r
- g_pSuccMessageView = nullptr;\r
-}\r
-\r
-TipsSuccMessageView *TipsSuccMessageView::GetInstance()\r
-{\r
- return g_pSuccMessageView;\r
-}\r
+ static TipsSuccMessageView *g_pSuccMessageView{nullptr};\r
+ TipsSuccMessageView::TipsSuccMessageView()\r
+ {\r
+ WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView::TipsSuccMessageView");\r
+ g_pSuccMessageView = this;\r
+ }\r
\r
-void TipsSuccMessageView::InitNameLabel(void)\r
-{\r
- if (bluetoothNameLabel == nullptr) {\r
- bluetoothNameLabel = new UILabel();\r
- if (bluetoothNameLabel == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "bluetoothNameLabel new fail");\r
- return;\r
+ TipsSuccMessageView::~TipsSuccMessageView()\r
+ {\r
+ WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView::~TipsSuccMessageView");\r
+ if (group)\r
+ {\r
+ group->RemoveAll();\r
+ if (titleLabel)\r
+ {\r
+ delete titleLabel;\r
+ titleLabel = nullptr;\r
+ }\r
+ if (tipImg)\r
+ {\r
+ delete tipImg;\r
+ tipImg = nullptr;\r
+ }\r
+ if (bluetoothNameLabel)\r
+ {\r
+ delete bluetoothNameLabel;\r
+ bluetoothNameLabel = nullptr;\r
+ }\r
+ if (conn_succ_Label)\r
+ {\r
+ delete conn_succ_Label;\r
+ conn_succ_Label = nullptr;\r
+ }\r
+ if (backButton)\r
+ {\r
+ delete backButton;\r
+ backButton = nullptr;\r
+ }\r
+ delete group;\r
+ group = nullptr;\r
}\r
- bluetoothNameLabel->SetLineBreakMode(UILabel::LINE_BREAK_MARQUEE);\r
- bluetoothNameLabel->SetPosition(60, 180, 333, 45); // 60:x 180:y 333:width 45:height\r
- bluetoothNameLabel->SetFont(DEFAULT_VECTOR_FONT_FILENAME, FONT_THIRTY_SIZE);\r
- bluetoothNameLabel->SetStyle(STYLE_BACKGROUND_COLOR, OPA_OPAQUE);\r
- bluetoothNameLabel->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER,\r
- UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
- group->Add(bluetoothNameLabel);\r
+ g_pSuccMessageView = nullptr;\r
}\r
-}\r
\r
-void TipsSuccMessageView::ShowUpButtonBack()\r
-{\r
- if (backButton == nullptr) {\r
- backButton = new UILabelButton();\r
- if (backButton == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView backButton new fail");\r
- return;\r
- }\r
- UIView::OnClickListener *clickListener = (UIView::OnClickListener *)OHOS::PlayersPresenter::GetInstance();\r
- UIView::OnClickListener *clickListener2 = (UIView::OnClickListener *)OHOS::BluetoothPresenter::GetInstance();\r
- if ((clickListener == nullptr) && (clickListener2 == nullptr)) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "clickListener GetInstance fail");\r
- return;\r
- }\r
- backButton->SetPosition(65, 359, 324, 101); // 65:x, 359:y, 324:width 101:height\r
- backButton->SetText("确定");\r
- backButton->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 40); // 40：font data\r
- backButton->SetImageSrc(PNG_NEW_DEVICE, PNG_NEW_DEVICE);\r
- backButton->SetViewId(BLUETOOTH_SUCC_BACK_BUTTON);\r
- if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERPLAYERS) {\r
- backButton->SetTextColor(Color::Red());\r
- backButton->SetOnClickListener(clickListener);\r
- } else if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERSETTING) {\r
- backButton->SetTextColor(Color::Blue());\r
- backButton->SetOnClickListener(clickListener2);\r
- }\r
- group->Add(backButton);\r
+ TipsSuccMessageView *TipsSuccMessageView::GetInstance()\r
+ {\r
+ return g_pSuccMessageView;\r
}\r
- if (tipImg == nullptr) {\r
- tipImg = new UIImageView();\r
- if (tipImg == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView tipImg new fail");\r
- return;\r
+\r
+ UIViewGroup *TipsSuccMessageView::ShowUpViewInit(void)\r
+ {\r
+ WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView::ShowUpViewInit");\r
+ if (group == nullptr)\r
+ {\r
+ group = new UIViewGroup();\r
+ if (group == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "group new fail");\r
+ return nullptr;\r
+ }\r
+ group->SetPosition(0, 0);\r
+ group->SetWidth(HORIZONTAL_RESOLUTION);\r
+ group->SetHeight(VERTICAL_RESOLUTION);\r
+ UIView::OnDragListener *tipsDragListener = (UIView::OnDragListener *)OHOS::PlayerOnDragListener::GetInstance();\r
+ UIView::OnDragListener *tipsDragListener2 = (UIView::OnDragListener *)OHOS::BluetoothPresenter::GetInstance();\r
+ if ((tipsDragListener == nullptr) && (tipsDragListener2 == nullptr))\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "tipsDragListener GetInstance fail");\r
+ return nullptr;\r
+ }\r
+ if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERPLAYERS)\r
+ {\r
+ group->SetOnDragListener(tipsDragListener);\r
+ }\r
+ else if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERSETTING)\r
+ {\r
+ group->SetOnDragListener(tipsDragListener2);\r
+ }\r
+ group->SetViewId(TIPS_SUCC_MESSAGE_VIEW);\r
+ group->SetDraggable(true);\r
+ group->SetTouchable(true);\r
+ /* ------------------------------- titleLabel ------------------------------- */\r
+ if (titleLabel == nullptr)\r
+ {\r
+ titleLabel = new UILabelExt();\r
+ if (titleLabel == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "BluetoothDeviceListView titleLabel new fail");\r
+ return nullptr;\r
+ }\r
+ titleLabel->SetPosition(83, 50, 300, 35);\r
+ titleLabel->SetTextId(STR_BLUETOOTH_HEADPHONES); // 蓝牙耳机\r
+ titleLabel->SetLineBreakMode(UILabel::LINE_BREAK_OSCILLATION);\r
+ titleLabel->SetStyle(STYLE_TEXT_FONT, 30);\r
+ titleLabel->SetStyle(STYLE_LINE_HEIGHT, 35);\r
+ titleLabel->SetRollSpeed(70);\r
+ titleLabel->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER, UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
+ titleLabel->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 30);\r
+ }\r
+ /* --------------------------------- tipImg --------------------------------- */\r
+ if (tipImg == nullptr)\r
+ {\r
+ tipImg = new UIImageView();\r
+ if (tipImg == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView tipImg new fail");\r
+ return nullptr;\r
+ }\r
+ tipImg->SetPosition(193, 121, 80, 80);\r
+ tipImg->SetSrc("/user/res/OK.bin");\r
+ }\r
+ /* --------------------------- bluetoothNameLabel --------------------------- */\r
+ if (bluetoothNameLabel == nullptr)\r
+ {\r
+ bluetoothNameLabel = new UILabelExt();\r
+ if (bluetoothNameLabel == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "bluetoothNameLabel new fail");\r
+ return nullptr;\r
+ }\r
+ bluetoothNameLabel->SetPosition(53, 235, 360, 35);\r
+ bluetoothNameLabel->SetStyle(STYLE_TEXT_FONT, 30);\r
+ bluetoothNameLabel->SetStyle(STYLE_LINE_HEIGHT, 35);\r
+ bluetoothNameLabel->SetLineBreakMode(UILabel::LINE_BREAK_OSCILLATION);\r
+ bluetoothNameLabel->SetRollSpeed(70);\r
+ bluetoothNameLabel->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 30);\r
+ bluetoothNameLabel->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER, UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
+ }\r
+ /* ----------------------------- conn_succ_Label ---------------------------- */\r
+ if (conn_succ_Label == nullptr)\r
+ {\r
+ conn_succ_Label = new UILabelExt();\r
+ if (conn_succ_Label == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView conn_succ_Label new fail");\r
+ return nullptr;\r
+ }\r
+ conn_succ_Label->SetPosition(53, bluetoothNameLabel->GetY() + bluetoothNameLabel->GetHeight(), 360, 35);\r
+ // conn_succ_Label->SetText("连接成功");\r
+ conn_succ_Label->SetTextId(STR_CONNECTION_SUCC);\r
+ conn_succ_Label->SetStyle(STYLE_TEXT_FONT, 30);\r
+ conn_succ_Label->SetStyle(STYLE_LINE_HEIGHT, 35);\r
+ conn_succ_Label->SetLineBreakMode(UILabel::LINE_BREAK_OSCILLATION);\r
+ conn_succ_Label->SetRollSpeed(70);\r
+ conn_succ_Label->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 30);\r
+ conn_succ_Label->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER, UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
+ conn_succ_Label->SetTextColor(Color::GetColorFromRGBA(0xff, 0xff, 0xff, 0x7f));\r
+ }\r
+ /* ------------------------------- backButton ------------------------------- */\r
+ if (backButton == nullptr)\r
+ {\r
+ backButton = new UILabelButtonExt();\r
+ if (backButton == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView backButton new fail");\r
+ return nullptr;\r
+ }\r
+ UIView::OnClickListener *clickListener = (UIView::OnClickListener *)OHOS::PlayersPresenter::GetInstance();\r
+ UIView::OnClickListener *clickListener2 = (UIView::OnClickListener *)OHOS::BluetoothPresenter::GetInstance();\r
+ if ((clickListener == nullptr) && (clickListener2 == nullptr))\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "clickListener GetInstance fail");\r
+ return nullptr;\r
+ }\r
+ backButton->SetPosition(0, 366, 466, 100);\r
+ backButton->SetTextId(STR_OK); // 确定\r
+ backButton->SetStyle(STYLE_LINE_HEIGHT, 35);\r
+ backButton->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 30);\r
+ backButton->SetImageSrc(PNG_BUTTON_466x100_IMAGE, PNG_BUTTON_466x100_IMAGE);\r
+ backButton->SetViewId(BLUETOOTH_SUCC_BACK_BUTTON);\r
+ backButton->SetTextColor(Color::GetColorFromRGBA(0x35, 0x49, 0xff, 0xff));\r
+ if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERPLAYERS)\r
+ {\r
+ backButton->SetOnClickListener(clickListener);\r
+ }\r
+ else if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERSETTING)\r
+ {\r
+ backButton->SetOnClickListener(clickListener2);\r
+ }\r
+ }\r
+ group->Add(titleLabel);\r
+ group->Add(tipImg);\r
+ group->Add(bluetoothNameLabel);\r
+ group->Add(conn_succ_Label);\r
+ group->Add(backButton);\r
}\r
- tipImg->SetPosition(181, 78, 90, 90); // 181:x 78:y 90:width 90:height\r
- tipImg->SetSrc(PNG_RIGHT);\r
- group->Add(tipImg);\r
+ return group;\r
}\r
- return;\r
-}\r
\r
-UIViewGroup *TipsSuccMessageView::ShowUpViewInit(void)\r
-{\r
- WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView::ShowUpViewInit");\r
- if (group == nullptr) {\r
- group = new UIViewGroup();\r
- if (group == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "group new fail");\r
- return nullptr;\r
+ // 刷新设备名称\r
+ void TipsSuccMessageView::RefreshNameLabel(const bd_addr_t &bdAddr)\r
+ {\r
+ BluetoothCaseInfo caseInfo;\r
+ (void)memcpy_s(caseInfo.addr, BD_ADDR_LEN, bdAddr.addr, BD_ADDR_LEN);\r
+ bool ret = BluetoothModel::GetInstance()->FindNameFromList(&caseInfo);\r
+ if (!ret)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView FindNameFromList fail");\r
+ return;\r
}\r
- group->SetPosition(0, 0);\r
- group->SetWidth(HORIZONTAL_RESOLUTION);\r
- group->SetHeight(VERTICAL_RESOLUTION);\r
- }\r
- if (titleLabel == nullptr) {\r
- titleLabel = new UILabel();\r
- if (titleLabel == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView titleLabel new fail");\r
- return nullptr;\r
+ if (bluetoothNameLabel == nullptr)\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView::RefreshNameLabel bluetoothNameLabel == nullptr");\r
+ return;\r
}\r
- titleLabel->SetPosition(0, 244, HORIZONTAL_RESOLUTION, 45); // 0:x 244:y 454:width 45:height\r
- titleLabel->SetText("连接成功");\r
- titleLabel->SetFont(DEFAULT_VECTOR_FONT_FILENAME, 40); // 40：font data\r
- titleLabel->SetStyle(STYLE_BACKGROUND_COLOR, OPA_OPAQUE);\r
- titleLabel->SetAlign(UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER,\r
- UITextLanguageAlignment::TEXT_ALIGNMENT_CENTER);\r
- group->Add(titleLabel);\r
- }\r
- InitNameLabel();\r
- ShowUpButtonBack();\r
- UIView::OnDragListener *tipsDragListener = (UIView::OnDragListener *)OHOS::PlayerOnDragListener::GetInstance();\r
- UIView::OnDragListener *tipsDragListener2 = (UIView::OnDragListener *)OHOS::BluetoothPresenter::GetInstance();\r
- if ((tipsDragListener == nullptr) && (tipsDragListener2 == nullptr)) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "tipsDragListener GetInstance fail");\r
- return nullptr;\r
- }\r
- if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERPLAYERS) {\r
- group->SetOnDragListener(tipsDragListener);\r
- } else if (BluetoothModel::GetInstance()->GetBluetoothCalleridStatus() == CALLERSETTING) {\r
- group->SetOnDragListener(tipsDragListener2);\r
- }\r
- group->SetViewId(TIPS_SUCC_MESSAGE_VIEW);\r
- group->SetDraggable(true);\r
- group->SetTouchable(true);\r
- return group;\r
-}\r
-\r
-//刷新设备名称\r
-void TipsSuccMessageView::RefreshNameLabel(const bd_addr_t &bdAddr)\r
-{\r
- BluetoothCaseInfo caseInfo;\r
- (void)memcpy_s(caseInfo.addr, BD_ADDR_LEN, bdAddr.addr, BD_ADDR_LEN);\r
- bool ret = BluetoothModel::GetInstance()->FindNameFromList(&caseInfo);\r
- if (!ret) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView FindNameFromList fail");\r
- return;\r
- }\r
- if (bluetoothNameLabel == nullptr) {\r
- WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "TipsSuccMessageView::RefreshNameLabel bluetoothNameLabel == nullptr");\r
- return;\r
+ bluetoothNameLabel->SetText(reinterpret_cast<const char *>(caseInfo.deviceName));\r
}\r
- bluetoothNameLabel->SetText(reinterpret_cast<const char *>(caseInfo.deviceName));\r
-}\r
}
\ No newline at end of file
STR_SLEEP_MODE_PROMPT_ON = 549,\r
STR_LOW_POWER_NOTIF_1 = 550,\r
STR_LOW_POWER_NOTIF_2 = 551,\r
- STR_MAX_ID = 552,\r
+ STR_CONNECTION_SUCC = 552,\r
+ STR_RETRY = 553,\r
+ STR_BTEARPHONE_CONN_FAIL_TIP = 554,\r
+ STR_FLASHLIGHT_SETTING = 555,\r
+ STR_LIGHT_COLOR = 556,\r
+ STR_FLICKER_FREQUENCY = 557,\r
+ STR_NO_FLICKER = 558,\r
+ STR_FAST_FLICKER = 559,\r
+ STR_SLOW_FLICKER = 560,\r
+ STR_BROWSING_SPECIAL_EFFECTS = 561,\r
+ STR_OVERLAY_FLOW = 562,\r
+ STR_ROLLER = 563,\r
+ STR_DIAL_BROWSING_SPECIAL_EFFECTS = 564,\r
+ STR_SET_TARGET = 565,\r
+ STR_PWUWC = 566,\r
+ STR_MAX_ID = 567,\r
}; // UIResourceTextId\r
enum FontLanguageId : uint8_t {
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_SLEEPMODE$Schlafmodus\r
STR_SLEEP_MODE_PROMPT_ON$Im Schlafmodus werden alle Benachrichtigungen deaktiviert und das Schlafmonitoring aktiviert.\r
STR_LOW_POWER_NOTIF_1$Der aktuelle Akku ist unter 10%, bitte rechtzeitig aufladen.\r
-STR_LOW_POWER_NOTIF_2$Bei zu niedrigem Akkustand schaltet es sich nach XX Sekunden automatisch aus.
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$Bei zu niedrigem Akkustand schaltet es sich nach XX Sekunden automatisch aus.\r
+STR_CONNECTION_SUCC$Verbindung erfolgreich\r
+STR_RETRY$Wiederholen\r
+STR_BTEARPHONE_CONN_FAIL_TIP$Bitte bestätigen Sie, dass das Gerät sich im Kommunikationsbereich befindet und sich im Pairing-Wartezustand befindet\r
+STR_FLASHLIGHT_SETTING$Taschenlampeneinstellungen\r
+STR_LIGHT_COLOR$Lichtfarbe\r
+STR_FLICKER_FREQUENCY$Blinkfrequenz\r
+STR_NO_FLICKER$Nicht blinken\r
+STR_FAST_FLICKER$Schnelles Blinken\r
+STR_SLOW_FLICKER$Langsames Blinken\r
+STR_BROWSING_SPECIAL_EFFECTS$Browsing-Spezialeffekte\r
+STR_OVERLAY_FLOW$Überlagerungsfluss\r
+STR_ROLLER$Walze\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$Zifferblatt-Browsing-Spezialeffekte\r
+STR_SET_TARGET$Einstellungsziel>\r
+STR_PWUWC$Tragen Sie die Uhr richtig
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_SLEEPMODE$Sleep mode\r
STR_SLEEP_MODE_PROMPT_ON$Turn on sleep mode, and the watch will disable all reminders\r
STR_LOW_POWER_NOTIF_1$The current battery is below 10%, please charge it in time\r
-STR_LOW_POWER_NOTIF_2$When the battery is too low XXs will automatically shut down
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$When the battery is too low XXs will automatically shut down\r
+STR_CONNECTION_SUCC$Connection successful\r
+STR_RETRY$Retry\r
+STR_BTEARPHONE_CONN_FAIL_TIP$Please confirm that the device is within the communication range and in the pairing-ready state.\r
+STR_FLASHLIGHT_SETTING$Flashlight settings\r
+STR_LIGHT_COLOR$Light color\r
+STR_FLICKER_FREQUENCY$Blinking frequency\r
+STR_NO_FLICKER$No blinking\r
+STR_FAST_FLICKER$Fast blinking\r
+STR_SLOW_FLICKER$Slow blinking\r
+STR_BROWSING_SPECIAL_EFFECTS$Browsing special effects\r
+STR_OVERLAY_FLOW$Overlay flow\r
+STR_ROLLER$Roller\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$Dial browsing special effects\r
+STR_SET_TARGET$Set target>\r
+STR_PWUWC$Please wear your watch correctly
\ No newline at end of file
STR_SLEEPMODE$Modo de sueño\r
STR_SLEEP_MODE_PROMPT_ON$Al activar el modo de sueño, el reloj desactivará todas las notificaciones y habilitará el monitoreo del sueño.\r
STR_LOW_POWER_NOTIF_1$La batería actual está por debajo del 10%, por favor, cárguela a tiempo.\r
-STR_LOW_POWER_NOTIF_2$La batería está demasiado baja, se apagará automáticamente después de XX segundos.
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$La batería está demasiado baja, se apagará automáticamente después de XX segundos.\r
+STR_CONNECTION_SUCC$Conexión exitosa\r
+STR_RETRY$Reintentar\r
+STR_BTEARPHONE_CONN_FAIL_TIP$Confirme que el dispositivo está dentro del rango de comunicación y en estado de espera de emparejamiento\r
+STR_FLASHLIGHT_SETTING$Configuración de la linterna\r
+STR_LIGHT_COLOR$Color de la luz\r
+STR_FLICKER_FREQUENCY$Frecuencia de parpadeo\r
+STR_NO_FLICKER$Sin parpadeo\r
+STR_FAST_FLICKER$Parpadeo rápido\r
+STR_SLOW_FLICKER$Parpadeo lento\r
+STR_BROWSING_SPECIAL_EFFECTS$Efectos especiales de navegación\r
+STR_OVERLAY_FLOW$Flujo de superposición\r
+STR_ROLLER$Tambor\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$Efectos especiales de navegación del dial\r
+STR_SET_TARGET$Objetivo de configuración>\r
+STR_PWUWC$Ponte el reloj correctamente
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_SLEEPMODE$Način spavanja\r
STR_SLEEP_MODE_PROMPT_ON$Aktiviranjem načina spavanja, sat će onemogućiti sve obavijesti i omogućiti praćenje sna.\r
STR_LOW_POWER_NOTIF_1$Trenutni nivo napunjenosti je ispod 10%, molimo vas da ga pravovremeno napunite.\r
-STR_LOW_POWER_NOTIF_2$Nizak nivo napunjenosti, automatski će se isključiti za XX sekundi.
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$Nizak nivo napunjenosti, automatski će se isključiti za XX sekundi.\r
+STR_CONNECTION_SUCC$Uspješno povezivanje\r
+STR_RETRY$Ponovite pokušaj\r
+STR_BTEARPHONE_CONN_FAIL_TIP$Molimo potvrdite da je uređaj unutar dosega komunikacije i u stanju čekanja na pariranje\r
+STR_FLASHLIGHT_SETTING$Postavke baterijske svjetiljke\r
+STR_LIGHT_COLOR$Boja svjetla\r
+STR_FLICKER_FREQUENCY$Frekvencija micanja\r
+STR_NO_FLICKER$Ne micanje\r
+STR_FAST_FLICKER$Brzo micanje\r
+STR_SLOW_FLICKER$Sporo micanje\r
+STR_BROWSING_SPECIAL_EFFECTS$Pogled specijalni efekti\r
+STR_OVERLAY_FLOW$Preklapanje toka\r
+STR_ROLLER$Bubanj\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$Specijalni efekti pregleda sata\r
+STR_SET_TARGET$Cilj podešavanja>\r
+STR_PWUWC$Nosu sat pravilno
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_SLEEPMODE$スリープモード\r
STR_SLEEP_MODE_PROMPT_ON$スリープモードをオンにすると、時計はすべての通知を無効にし、睡眠モニタリングを開始します。\r
STR_LOW_POWER_NOTIF_1$現在のバッテリー残量が10%未満ですので、早めに充電してください。\r
-STR_LOW_POWER_NOTIF_2$バッテリーが非常に少ないため、XX秒後に自動的にシャットダウンします。
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$バッテリーが非常に少ないため、XX秒後に自動的にシャットダウンします。\r
+STR_CONNECTION_SUCC$接続成功\r
+STR_RETRY$再試行\r
+STR_BTEARPHONE_CONN_FAIL_TIP$このデバイスが通信範囲内にあり、ペアリング待機状態にあることを確認してください\r
+STR_FLASHLIGHT_SETTING$懐中電灯の設定\r
+STR_LIGHT_COLOR$光の色\r
+STR_FLICKER_FREQUENCY$点滅頻度\r
+STR_NO_FLICKER$点滅しない\r
+STR_FAST_FLICKER$速い点滅\r
+STR_SLOW_FLICKER$遅い点滅\r
+STR_BROWSING_SPECIAL_EFFECTS$閲覧エフェクト\r
+STR_OVERLAY_FLOW$オーバーレイフロー\r
+STR_ROLLER$ドラム\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$文字盤閲覧エフェクト\r
+STR_SET_TARGET$設定目標＞\r
+STR_PWUWC$正しく時計を装着してください
\ No newline at end of file
STR_SLEEPMODE$수면 모드\r
STR_SLEEP_MODE_PROMPT_ON$수면 모드를 활성화하면 시계는 모든 알림을 비활성화하고 수면 모니터링을 시작합니다.\r
STR_LOW_POWER_NOTIF_1$현재 배터리 잔량이 10% 미만이므로 빨리 충전해 주세요.\r
-STR_LOW_POWER_NOTIF_2$배터리 잔량이 너무 낮아 XX초 후 자동으로 전원이 꺼집니다.
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$배터리 잔량이 너무 낮아 XX초 후 자동으로 전원이 꺼집니다.\r
+STR_CONNECTION_SUCC$연결 성공\r
+STR_RETRY$재시도\r
+STR_BTEARPHONE_CONN_FAIL_TIP$해당 장치가 통신 범위 내에 있으며 페어링 대기 상태에 있는지 확인하세요\r
+STR_FLASHLIGHT_SETTING$손전등 설정\r
+STR_LIGHT_COLOR$빛의 색깔\r
+STR_FLICKER_FREQUENCY$점멸 빈도\r
+STR_NO_FLICKER$안 점멸\r
+STR_FAST_FLICKER$빠른 점멸\r
+STR_SLOW_FLICKER$느린 점멸\r
+STR_BROWSING_SPECIAL_EFFECTS$브라우징 특수효과\r
+STR_OVERLAY_FLOW$오버레이 흐름\r
+STR_ROLLER$드럼\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$다이얼 브라우징 특수효과\r
+STR_SET_TARGET$설정 목표>\r
+STR_PWUWC$시계를 올바르게 착용하세요
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_SLEEPMODE$Режим сна\r
STR_SLEEP_MODE_PROMPT_ON$Включение режима сна отключает все уведомления и активирует мониторинг сна.\r
STR_LOW_POWER_NOTIF_1$Текущий заряд ниже 10%, пожалуйста, зарядите его вовремя.\r
-STR_LOW_POWER_NOTIF_2$Заряд слишком низкий, он автоматически отключится через XX секунд.
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$Заряд слишком низкий, он автоматически отключится через XX секунд.\r
+STR_CONNECTION_SUCC$Успешное соединение\r
+STR_RETRY$Повторить попытку\r
+STR_BTEARPHONE_CONN_FAIL_TIP$Пожалуйста, убедитесь, что устройство находится в зоне действия связи и находится в состоянии ожидания сопряжения\r
+STR_FLASHLIGHT_SETTING$Настройки фонарика\r
+STR_LIGHT_COLOR$Цвет света\r
+STR_FLICKER_FREQUENCY$Частота мерцания\r
+STR_NO_FLICKER$Не мигать\r
+STR_FAST_FLICKER$Быстрое мигание\r
+STR_SLOW_FLICKER$Медленное мигание\r
+STR_BROWSING_SPECIAL_EFFECTS$Специальные эффекты просмотра\r
+STR_OVERLAY_FLOW$Наложение потока\r
+STR_ROLLER$Барабан\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$Специальные эффекты просмотра циферблата\r
+STR_SET_TARGET$Цель настройки>\r
+STR_PWUWC$Наденьте часы правильно
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_ABOUT_WATCH$关于手表\r
STR_WATCH_QR_CODE$手表二维码\r
STR_SYSTEM_LANGUAGE$系统语言\r
-STR_RESTART$重启\r
+STR_RESTART$重新启动\r
STR_SHUTDOWN$关机\r
STR_FACTORY_RESET$恢复出厂\r
STR_WATCH_NAME$手表名称\r
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
STR_SLEEPMODE$睡眠模式\r
STR_SLEEP_MODE_PROMPT_ON$开启睡眠模式，手表将禁用所有提醒并开启睡眠监测\r
STR_LOW_POWER_NOTIF_1$当前电量低于10%请及时充电\r
-STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机
\ No newline at end of file
+STR_LOW_POWER_NOTIF_2$电量过低XXs后将自动关机\r
+STR_CONNECTION_SUCC$连接成功\r
+STR_RETRY$重试\r
+STR_BTEARPHONE_CONN_FAIL_TIP$请确认该设备在通信范围内且处于待配对状态\r
+STR_FLASHLIGHT_SETTING$手电筒设置\r
+STR_LIGHT_COLOR$灯光颜色\r
+STR_FLICKER_FREQUENCY$闪烁频率\r
+STR_NO_FLICKER$不闪烁\r
+STR_FAST_FLICKER$快闪烁\r
+STR_SLOW_FLICKER$慢闪烁\r
+STR_BROWSING_SPECIAL_EFFECTS$浏览特效\r
+STR_OVERLAY_FLOW$覆盖流\r
+STR_ROLLER$滚筒\r
+STR_DIAL_BROWSING_SPECIAL_EFFECTS$表盘浏览特效\r
+STR_SET_TARGET$设置目标>\r
+STR_PWUWC$请正确佩戴手表
\ No newline at end of file
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="Im Schlafmodus werden alle Benachrichtigungen deaktiviert und das Schlafmonitoring aktiviert."/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="Der aktuelle Akku ist unter 10%, bitte rechtzeitig aufladen."/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="Bei zu niedrigem Akkustand schaltet es sich nach XX Sekunden automatisch aus."/>
+ <lanstr id="STR_CONNECTION_SUCC" value="Verbindung erfolgreich"/>
+ <lanstr id="STR_RETRY" value="Wiederholen"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="Bitte bestätigen Sie, dass das Gerät sich im Kommunikationsbereich befindet und sich im Pairing-Wartezustand befindet"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="Taschenlampeneinstellungen"/>
+ <lanstr id="STR_LIGHT_COLOR" value="Lichtfarbe"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="Blinkfrequenz"/>
+ <lanstr id="STR_NO_FLICKER" value="Nicht blinken"/>
+ <lanstr id="STR_FAST_FLICKER" value="Schnelles Blinken"/>
+ <lanstr id="STR_SLOW_FLICKER" value="Langsames Blinken"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="Browsing-Spezialeffekte"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="Überlagerungsfluss"/>
+ <lanstr id="STR_ROLLER" value="Walze"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="Zifferblatt-Browsing-Spezialeffekte"/>
+ <lanstr id="STR_SET_TARGET" value="Einstellungsziel>"/>
+ <lanstr id="STR_PWUWC" value="Tragen Sie die Uhr richtig"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="Turn on sleep mode, and the watch will disable all reminders"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="The current battery is below 10%, please charge it in time"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="When the battery is too low XXs will automatically shut down"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="Connection successful"/>
+ <lanstr id="STR_RETRY" value="Retry"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="Please confirm that the device is within the communication range and in the pairing-ready state."/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="Flashlight settings"/>
+ <lanstr id="STR_LIGHT_COLOR" value="Light color"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="Blinking frequency"/>
+ <lanstr id="STR_NO_FLICKER" value="No blinking"/>
+ <lanstr id="STR_FAST_FLICKER" value="Fast blinking"/>
+ <lanstr id="STR_SLOW_FLICKER" value="Slow blinking"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="Browsing special effects"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="Overlay flow"/>
+ <lanstr id="STR_ROLLER" value="Roller"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="Dial browsing special effects"/>
+ <lanstr id="STR_SET_TARGET" value="Set target>"/>
+ <lanstr id="STR_PWUWC" value="Please wear your watch correctly"/>
</language>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="Al activar el modo de sueño, el reloj desactivará todas las notificaciones y habilitará el monitoreo del sueño."/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="La batería actual está por debajo del 10%, por favor, cárguela a tiempo."/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="La batería está demasiado baja, se apagará automáticamente después de XX segundos."/>
+ <lanstr id="STR_CONNECTION_SUCC" value="Conexión exitosa"/>
+ <lanstr id="STR_RETRY" value="Reintentar"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="Confirme que el dispositivo está dentro del rango de comunicación y en estado de espera de emparejamiento"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="Configuración de la linterna"/>
+ <lanstr id="STR_LIGHT_COLOR" value="Color de la luz"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="Frecuencia de parpadeo"/>
+ <lanstr id="STR_NO_FLICKER" value="Sin parpadeo"/>
+ <lanstr id="STR_FAST_FLICKER" value="Parpadeo rápido"/>
+ <lanstr id="STR_SLOW_FLICKER" value="Parpadeo lento"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="Efectos especiales de navegación"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="Flujo de superposición"/>
+ <lanstr id="STR_ROLLER" value="Tambor"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="Efectos especiales de navegación del dial"/>
+ <lanstr id="STR_SET_TARGET" value="Objetivo de configuración>"/>
+ <lanstr id="STR_PWUWC" value="Ponte el reloj correctamente"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="Aktiviranjem načina spavanja, sat će onemogućiti sve obavijesti i omogućiti praćenje sna."/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="Trenutni nivo napunjenosti je ispod 10%, molimo vas da ga pravovremeno napunite."/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="Nizak nivo napunjenosti, automatski će se isključiti za XX sekundi."/>
+ <lanstr id="STR_CONNECTION_SUCC" value="Uspješno povezivanje"/>
+ <lanstr id="STR_RETRY" value="Ponovite pokušaj"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="Molimo potvrdite da je uređaj unutar dosega komunikacije i u stanju čekanja na pariranje"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="Postavke baterijske svjetiljke"/>
+ <lanstr id="STR_LIGHT_COLOR" value="Boja svjetla"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="Frekvencija micanja"/>
+ <lanstr id="STR_NO_FLICKER" value="Ne micanje"/>
+ <lanstr id="STR_FAST_FLICKER" value="Brzo micanje"/>
+ <lanstr id="STR_SLOW_FLICKER" value="Sporo micanje"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="Pogled specijalni efekti"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="Preklapanje toka"/>
+ <lanstr id="STR_ROLLER" value="Bubanj"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="Specijalni efekti pregleda sata"/>
+ <lanstr id="STR_SET_TARGET" value="Cilj podešavanja>"/>
+ <lanstr id="STR_PWUWC" value="Nosu sat pravilno"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="スリープモードをオンにすると、時計はすべての通知を無効にし、睡眠モニタリングを開始します。"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="現在のバッテリー残量が10%未満ですので、早めに充電してください。"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="バッテリーが非常に少ないため、XX秒後に自動的にシャットダウンします。"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="接続成功"/>
+ <lanstr id="STR_RETRY" value="再試行"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="このデバイスが通信範囲内にあり、ペアリング待機状態にあることを確認してください"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="懐中電灯の設定"/>
+ <lanstr id="STR_LIGHT_COLOR" value="光の色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="点滅頻度"/>
+ <lanstr id="STR_NO_FLICKER" value="点滅しない"/>
+ <lanstr id="STR_FAST_FLICKER" value="速い点滅"/>
+ <lanstr id="STR_SLOW_FLICKER" value="遅い点滅"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="閲覧エフェクト"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="オーバーレイフロー"/>
+ <lanstr id="STR_ROLLER" value="ドラム"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="文字盤閲覧エフェクト"/>
+ <lanstr id="STR_SET_TARGET" value="設定目標＞"/>
+ <lanstr id="STR_PWUWC" value="正しく時計を装着してください"/>
</language>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="수면 모드를 활성화하면 시계는 모든 알림을 비활성화하고 수면 모니터링을 시작합니다."/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="현재 배터리 잔량이 10% 미만이므로 빨리 충전해 주세요."/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="배터리 잔량이 너무 낮아 XX초 후 자동으로 전원이 꺼집니다."/>
+ <lanstr id="STR_CONNECTION_SUCC" value="연결 성공"/>
+ <lanstr id="STR_RETRY" value="재시도"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="해당 장치가 통신 범위 내에 있으며 페어링 대기 상태에 있는지 확인하세요"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="손전등 설정"/>
+ <lanstr id="STR_LIGHT_COLOR" value="빛의 색깔"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="점멸 빈도"/>
+ <lanstr id="STR_NO_FLICKER" value="안 점멸"/>
+ <lanstr id="STR_FAST_FLICKER" value="빠른 점멸"/>
+ <lanstr id="STR_SLOW_FLICKER" value="느린 점멸"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="브라우징 특수효과"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="오버레이 흐름"/>
+ <lanstr id="STR_ROLLER" value="드럼"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="다이얼 브라우징 특수효과"/>
+ <lanstr id="STR_SET_TARGET" value="설정 목표>"/>
+ <lanstr id="STR_PWUWC" value="시계를 올바르게 착용하세요"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="Включение режима сна отключает все уведомления и активирует мониторинг сна."/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="Текущий заряд ниже 10%, пожалуйста, зарядите его вовремя."/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="Заряд слишком низкий, он автоматически отключится через XX секунд."/>
+ <lanstr id="STR_CONNECTION_SUCC" value="Успешное соединение"/>
+ <lanstr id="STR_RETRY" value="Повторить попытку"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="Пожалуйста, убедитесь, что устройство находится в зоне действия связи и находится в состоянии ожидания сопряжения"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="Настройки фонарика"/>
+ <lanstr id="STR_LIGHT_COLOR" value="Цвет света"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="Частота мерцания"/>
+ <lanstr id="STR_NO_FLICKER" value="Не мигать"/>
+ <lanstr id="STR_FAST_FLICKER" value="Быстрое мигание"/>
+ <lanstr id="STR_SLOW_FLICKER" value="Медленное мигание"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="Специальные эффекты просмотра"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="Наложение потока"/>
+ <lanstr id="STR_ROLLER" value="Барабан"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="Специальные эффекты просмотра циферблата"/>
+ <lanstr id="STR_SET_TARGET" value="Цель настройки>"/>
+ <lanstr id="STR_PWUWC" value="Наденьте часы правильно"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_ABOUT_WATCH" value="关于手表"/>
<lanstr id="STR_WATCH_QR_CODE" value="手表二维码"/>
<lanstr id="STR_SYSTEM_LANGUAGE" value="系统语言"/>
- <lanstr id="STR_RESTART" value="重启"/>
+ <lanstr id="STR_RESTART" value="重新启动"/>
<lanstr id="STR_SHUTDOWN" value="关机"/>
<lanstr id="STR_FACTORY_RESET" value="恢复出厂"/>
<lanstr id="STR_WATCH_NAME" value="手表名称"/>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
<lanstr id="STR_SLEEP_MODE_PROMPT_ON" value="开启睡眠模式，手表将禁用所有提醒并开启睡眠监测"/>
<lanstr id="STR_LOW_POWER_NOTIF_1" value="当前电量低于10%请及时充电"/>
<lanstr id="STR_LOW_POWER_NOTIF_2" value="电量过低XXs后将自动关机"/>
+ <lanstr id="STR_CONNECTION_SUCC" value="连接成功"/>
+ <lanstr id="STR_RETRY" value="重试"/>
+ <lanstr id="STR_BTEARPHONE_CONN_FAIL_TIP" value="请确认该设备在通信范围内且处于待配对状态"/>
+ <lanstr id="STR_FLASHLIGHT_SETTING" value="手电筒设置"/>
+ <lanstr id="STR_LIGHT_COLOR" value="灯光颜色"/>
+ <lanstr id="STR_FLICKER_FREQUENCY" value="闪烁频率"/>
+ <lanstr id="STR_NO_FLICKER" value="不闪烁"/>
+ <lanstr id="STR_FAST_FLICKER" value="快闪烁"/>
+ <lanstr id="STR_SLOW_FLICKER" value="慢闪烁"/>
+ <lanstr id="STR_BROWSING_SPECIAL_EFFECTS" value="浏览特效"/>
+ <lanstr id="STR_OVERLAY_FLOW" value="覆盖流"/>
+ <lanstr id="STR_ROLLER" value="滚筒"/>
+ <lanstr id="STR_DIAL_BROWSING_SPECIAL_EFFECTS" value="表盘浏览特效"/>
+ <lanstr id="STR_SET_TARGET" value="设置目标>"/>
+ <lanstr id="STR_PWUWC" value="请正确佩戴手表"/>
</language>
STR_SLEEP_MODE_PROMPT_ON = 549,\r
STR_LOW_POWER_NOTIF_1 = 550,\r
STR_LOW_POWER_NOTIF_2 = 551,\r
- STR_MAX_ID = 552,\r
+ STR_CONNECTION_SUCC = 552,\r
+ STR_RETRY = 553,\r
+ STR_BTEARPHONE_CONN_FAIL_TIP = 554,\r
+ STR_FLASHLIGHT_SETTING = 555,\r
+ STR_LIGHT_COLOR = 556,\r
+ STR_FLICKER_FREQUENCY = 557,\r
+ STR_NO_FLICKER = 558,\r
+ STR_FAST_FLICKER = 559,\r
+ STR_SLOW_FLICKER = 560,\r
+ STR_BROWSING_SPECIAL_EFFECTS = 561,\r
+ STR_OVERLAY_FLOW = 562,\r
+ STR_ROLLER = 563,\r
+ STR_DIAL_BROWSING_SPECIAL_EFFECTS = 564,\r
+ STR_SET_TARGET = 565,\r
+ STR_PWUWC = 566,\r
+ STR_MAX_ID = 567,\r
}; // UIResourceTextId\r
enum FontLanguageId : uint8_t {
projects / mirrors / FD230.git / commitdiff