int PullUpDownView::GetSignalStrength(void)
{
WEARABLE_LOGD(WEARABLE_LOG_MODULE_APP, "PullUpDownView::GetSignalStrength");
- runtime_status_t *g_runtime = get_device_runtime_status();
- int SignalStrength = g_runtime->cat1_runtime.signal; // 信号强度
+ int SignalStrength = uapi_dev_runtime_get_cat1_signal(); // 信号强度
WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "SignalStrength = %d", SignalStrength);
return SignalStrength;
{
cat1_getsignal();
cat1_getver();
- runtime_status_t *runtime = get_device_runtime_status();
OHOS::testcat1View *pview = OHOS::testcat1View::GetInstance();
OHOS::testcat1View::cat1_Ver msgver={0};
- msgver.cat1appver = runtime->cat1_runtime.pyVer;
- msgver.modem_version = runtime->cat1_runtime.modemVer;
+ msgver.cat1appver = uapi_dev_runtime_get_cat1_pyver();
+ msgver.modem_version = uapi_dev_runtime_get_cat1_modemver();
OHOS::testcat1View::cat1_msg msg={0};
- msg.imei = runtime->cat1_runtime.imei;
- msg.sim = runtime->cat1_runtime.sim;
- msg.signal = runtime->cat1_runtime.signal;
- msg.oper = runtime->cat1_runtime.opera;
+ msg.imei = uapi_dev_runtime_get_cat1_imei();
+ msg.sim = uapi_dev_runtime_get_cat1_simstat();
+ msg.signal = uapi_dev_runtime_get_cat1_signal();
+ msg.oper = uapi_dev_runtime_get_cat1_operator();
if(pview !=NULL)
{
memcpy_s(filename,dialinfo.file_name_len,data+sizeof(msg_recv_single_dial_info_t),dialinfo.file_name_len);\r
filename[dialinfo.file_name_len] ='\0';\r
//在runtime中备份一个安装文件名。\r
- memset_s(get_device_runtime_status()->current_dial_name,sizeof(get_device_runtime_status()->current_dial_name),0,sizeof(get_device_runtime_status()->current_dial_name));\r
- memcpy_s(get_device_runtime_status()->current_dial_name,sizeof(get_device_runtime_status()->current_dial_name),filename,dialinfo.file_name_len);\r
-\r
+ uapi_dev_runtime_set_dialname(filename);\r
buffer_handle->file_recv_stat.file_name = filename;\r
buffer_handle->file_recv_stat.file_size = file_size;\r
buffer_handle->file_recv_stat.file_type = 3;//表盘\r
}\r
static errcode_t install_dial(void)\r
{\r
- printf("install %s\n",get_device_runtime_status()->current_dial_name);\r
- char *lzmapkgname =(char*)(get_device_runtime_status()->current_dial_name);\r
+ char *lzmapkgname =uapi_dev_runtime_get_dialname();\r
+ printf("install %s\n",lzmapkgname);\r
char *lzmaindex = strstr(lzmapkgname,".lzma");\r
if (lzmaindex != NULL)\r
{\r
printf("dial_basenamelen %d\n",dial_basenamelen);\r
if (dial_basenamelen>0 )\r
{\r
- memcpy_s(dial_basename,sizeof(dial_basename),get_device_runtime_status()->current_dial_name,dial_basenamelen);\r
+ memcpy_s(dial_basename,sizeof(dial_basename),lzmapkgname,dial_basenamelen);\r
}\r
else{\r
return ERRCODE_FAIL;\r
\r
cat1_getsignal();\r
msleep(1000);\r
- runtime_status_t * runtime = get_device_runtime_status();\r
- send_data[1]=runtime->cat1_runtime.sim;\r
+ send_data[1]=uapi_dev_runtime_get_cat1_simstat();\r
factorytest_protocol_replymsg(BLE_TEST_CMD_MODE_SOFT_TEST,\r
BLE_TEST_CMD_SOFT_TEST_SUB_MODE_CAT1,\r
0x03,\r
\r
cat1_getsignal();\r
msleep(1000);\r
- runtime_status_t * runtime = get_device_runtime_status();\r
- send_data[1]=runtime->cat1_runtime.signal;\r
+ send_data[1]=uapi_dev_runtime_get_cat1_signal();\r
\r
factorytest_protocol_replymsg(BLE_TEST_CMD_MODE_SOFT_TEST,\r
BLE_TEST_CMD_SOFT_TEST_SUB_MODE_CAT1,\r
cat1_getsignal();\r
msleep(1000);\r
\r
- runtime_status_t * runtime = get_device_runtime_status();\r
\r
- PRINT("send_buf : %s \r\n",runtime->cat1_runtime.opera);\r
+ PRINT("send_buf : %s \r\n",uapi_dev_runtime_get_cat1_operator());\r
\r
factorytest_protocol_replymsg(BLE_TEST_CMD_MODE_SOFT_TEST,\r
BLE_TEST_CMD_SOFT_TEST_SUB_MODE_CAT1,\r
0x05,\r
- (uint8_t *)runtime->cat1_runtime.opera,\r
- strlen(runtime->cat1_runtime.opera));\r
+ (uint8_t *)uapi_dev_runtime_get_cat1_operator(),\r
+ strlen(uapi_dev_runtime_get_cat1_operator()));\r
} else if(testitem == 0x06)\r
{\r
//拨打电话\r
{
// FE150117ref:0@total_num:1@seq:1@data:0100240D91688139687502F200084250926172722316662F6211670B53CB621153EF80FD9700898198847EA6
- runtime_status_t * runtime = get_device_runtime_status();
int msglen = strlen(msg)+1;
if (msglen < 25)
{
{
int update = 0;
- runtime_status_t * runtime = get_device_runtime_status();
if (strlen(msg) < 50)
{
{
char* ptmp=s+6;
PRINT("pyVer= %s\r\n",ptmp);
- if ( strcmp(runtime->cat1_runtime.pyVer,ptmp)!=0 )
+ if ( strcmp(uapi_dev_runtime_get_cat1_pyver(),ptmp)!=0 )
{
update++;
- memset(runtime->cat1_runtime.pyVer,0,sizeof(runtime->cat1_runtime.pyVer));
- strcpy_s(runtime->cat1_runtime.pyVer,sizeof(runtime->cat1_runtime.pyVer),ptmp);
+ uapi_dev_runtime_set_cat1_pyver(ptmp);
}
if (strncmp(ptmp,"PY_SRV_V",8)==0 && strlen(ptmp)>8)
{
{
char* ptmp=s+9;
PRINT("modemVer= %s\r\n",ptmp);
- if (strcmp(runtime->cat1_runtime.modemVer,ptmp) != 0)
+ if (strcmp(uapi_dev_runtime_get_cat1_modemver(),ptmp) != 0)
{
update++;
- memset(runtime->cat1_runtime.modemVer,0,sizeof(runtime->cat1_runtime.modemVer));
- strcpy_s(runtime->cat1_runtime.modemVer,sizeof(runtime->cat1_runtime.modemVer),ptmp);
+ uapi_dev_runtime_set_cat1_modemver(ptmp);
}
} else if (strncmp(s,"PY_",3) == 0 )
{
PRINT("pyVer = %s\r\n",s);
- if ( strcmp(runtime->cat1_runtime.pyVer,s)!=0 )
+ if ( strcmp(uapi_dev_runtime_get_cat1_pyver(),s)!=0 )
{
update++;
- memset(runtime->cat1_runtime.pyVer,0,sizeof(runtime->cat1_runtime.pyVer));
- strcpy_s(runtime->cat1_runtime.pyVer,sizeof(runtime->cat1_runtime.pyVer),s);
+ uapi_dev_runtime_set_cat1_pyver(s);
}
}else if (strncmp(s,"EG810M",6) == 0 )
{
- PRINT("modemVer = %s\r\n",s);
- if (strcmp(runtime->cat1_runtime.modemVer,s) != 0)
+ PRINT("modemVer = %s\r\n",s);
+ if (strcmp(uapi_dev_runtime_get_cat1_modemver(),s) != 0)
{
update++;
- memset(runtime->cat1_runtime.modemVer,0,sizeof(runtime->cat1_runtime.modemVer));
- strcpy_s(runtime->cat1_runtime.modemVer,sizeof(runtime->cat1_runtime.modemVer),s);
+ uapi_dev_runtime_set_cat1_modemver(s);
}
}
}
static int decodeNetStat(char* msg)
{
int update = 0;
- runtime_status_t * runtime = get_device_runtime_status();
if (strlen(msg) < 50)
{
PRINT("msg len is too short !\r\n");
if(strncmp(s,"imei:",5) == 0)
{
ppbuf = s+5;
- PRINT("=== imei = %s\r\n",ppbuf);
- if ( strcmp(runtime->cat1_runtime.imei,ppbuf)!=0 )
+ PRINT("=== imei = %s\r\n",ppbuf);
+ if ( strcmp(uapi_dev_runtime_get_cat1_imei(),ppbuf)!=0 )
{
update++;
- memset(runtime->cat1_runtime.imei,0,sizeof(runtime->cat1_runtime.imei));
- strcpy_s(runtime->cat1_runtime.imei,sizeof(runtime->cat1_runtime.imei),ppbuf);
+ uapi_dev_runtime_set_cat1_imei(ppbuf);
}
continue;
}else if(strncmp(s,"sim:",4) == 0)
ppbuf=s+4;
int simstat = atoi(ppbuf);
PRINT("=== sim = %d\r\n",simstat);
- if ( runtime->cat1_runtime.sim != simstat)
+ if ( uapi_dev_runtime_get_cat1_simstat() != simstat)
{
update++;
- runtime->cat1_runtime.sim = simstat;
+ uapi_dev_runtime_set_cat1_simstat(simstat);
}
continue;
}else if(strncmp(s,"oper:",5) == 0)
ppbuf=s+5;
PRINT("=== opera = %s\r\n",ppbuf);
- if ( strcmp(runtime->cat1_runtime.opera,ppbuf)!=0 )
+ if ( strcmp(uapi_dev_runtime_get_cat1_operator(),ppbuf)!=0 )
{
update++;
- memset(runtime->cat1_runtime.opera,0,sizeof(runtime->cat1_runtime.opera));
- strcpy_s(runtime->cat1_runtime.opera,sizeof(runtime->cat1_runtime.opera),ppbuf);
+ uapi_dev_runtime_set_cat1_operator(ppbuf);
}
continue;
ppbuf=s+7;
int signals = atoi(ppbuf);
PRINT("=== signal = %d\r\n",signals);
- if ( runtime->cat1_runtime.signal != signals)
+ if ( uapi_dev_runtime_get_cat1_signal() != signals)
{
update++;
- runtime->cat1_runtime.signal = signals;
+ uapi_dev_runtime_set_cat1_signal(signals);
}
continue;
}
- if(g_py_ver == 6 && strncmp(s,"net:",4) == 0)
+ if(g_py_ver >= 6 && strncmp(s,"net:",4) == 0)
{
ppbuf = s+4;
/**
* voice_stat 语音网络状态：1,注冊本地网络，5注册漫游网络，其他不通,
* voice_rat, 语音网络类型： 0 GSM ；1 GSM COMPACT ；2 UTRAN ；3 GSM wEGPRS ； 4 UTRAN wHSDPA ；5 UTRAN wHSUPA ；
* 6 UTRAN wHSDPA HSUPA ；7 E_UTRAN ；8 UTRAN HSPAP ；9 E_UTRAN_CA ；10 NONE
- * data_stat, 数据网络状态
- * data_rat 数据网络类型
+ * data_stat, 数据网络状态 同上
+ * data_rat 数据网络类型 同上
*
*/
memset(netstat,0,sizeof(netstat));
}
- if(g_py_ver == 6 )
+ if(g_py_ver >= 6 )
{
int idx=0;
pchStrTmpIn=NULL;
+ // PRINT("netstat %s\n",netstat);
for (s = strtok_r(netstat,",",&pchStrTmpIn); s!=NULL;s=strtok_r(NULL,",",&pchStrTmpIn))
{
+ // PRINT("idx %d, value %s\n",idx,s);
switch(idx)
{
case 2:
- runtime->cat1_runtime.network_on = atoi(s) ;
+ {
+ int networkon = atoi(s) ;
+ PRINT("=== networkon = %d , %s \n",networkon,networkon==1?"connected":networkon==5?"roaming":"unkown");
+ uapi_dev_runtime_set_cat1_networkstat(networkon);
+
+ }
break;
case 3:
- runtime->cat1_runtime.cat1_network_type = atoi(s);
+ {
+ int network_type = atoi(s);
+ PRINT("=== network_type = %d , %s\n",network_type,
+ network_type==0?"GSM":network_type==1?"GSM COMPACT":network_type==2?"UTRAN":network_type==3?"GSM wEGPRS":network_type==4?"UTRAN wHSDPA":network_type==5?"UTRAN wHSUPA":network_type==6?"UTRAN wHSDPA HSUPA":network_type==7?"E_UTRAN":network_type==8?"UTRAN HSPAP":network_type==9?"E_UTRAN_CA":"NONE"
+ );
+ uapi_dev_runtime_set_cat1_networktype(network_type);
+ }
break;
case 0:
case 1:
{
// WEARABLE_LOGI(WEARABLE_LOG_MODULE_MAIN_SERVICE,"cat1 cat1_handle_networ_msg %s\n",msg->buffer);
if(decodeNetStat(msg) == 0)
- {
- runtime_status_t * runtime = get_device_runtime_status();
- OHOS::ConfigModel::GetInstance()->Setimei(runtime->cat1_runtime.imei);
+ {
+ OHOS::ConfigModel::GetInstance()->Setimei(uapi_dev_runtime_get_cat1_imei());
cat1_msg_event_sendmsg_toUI("netupdate");
}
//显示UI 信号
if(decodeVersion(msg) == 0)
{
- runtime_status_t * runtime = get_device_runtime_status();
- OHOS::ConfigModel::GetInstance()->SetpyVer(runtime->cat1_runtime.pyVer);
- OHOS::ConfigModel::GetInstance()->SetmoderVer(runtime->cat1_runtime.modemVer);
+
+ OHOS::ConfigModel::GetInstance()->SetpyVer(uapi_dev_runtime_get_cat1_pyver());
+ OHOS::ConfigModel::GetInstance()->SetmoderVer(uapi_dev_runtime_get_cat1_modemver());
cat1_msg_event_sendmsg_toUI("verupdate");
}
{
// PRINT("time_sync_func\n");
-
- runtime_status_t * runtime = get_device_runtime_status();
+
if (uapi_cat1_get_power_stat() == false )
{
// PRINT("cat1 power off reset cat1_runtime \n");
//开关是关的 则cat1所有状态清空
- runtime->cat1_runtime.cat1_powerOn = 0;
- runtime->cat1_runtime.network_on = 0;
- runtime->cat1_runtime.signal = 99;
- runtime->cat1_runtime.sim = 0;
- runtime->cat1_runtime.volte = 0;
- return ;
+ uapi_dev_runtime_set_cat1_powerstat(0);
+ uapi_dev_runtime_set_cat1_networkstat(0);
+ uapi_dev_runtime_set_cat1_signal(0);
+ uapi_dev_runtime_set_cat1_simstat(0);
+
+ return ;
}else{
- runtime->cat1_runtime.cat1_powerOn = 1;
+ uapi_dev_runtime_set_cat1_powerstat(1);
}
#include "custom_runtime.h"
#include "chip_system_time.h"
+
+
+
+typedef struct
+{
+ uint8_t bt_powerOn;
+ uint8_t bt_ble_connectstat;
+ uint8_t bt_br_connectstat;
+ uint8_t bt_earphone_connectstat;
+ uint8_t android_app_connected;
+ uint16_t ble_kumi_service_handler;
+ uint16_t ble_factory_service_handler;
+ uint16_t ble_alipay_service_handler;
+ uint16_t ble_hrs_service_handler;
+ uint16_t ble_hid_service_handler;
+ uint16_t ble_ancs_client_id;
+ uint16_t ad2p_service_handler;
+ uint16_t spp_service_handler;
+ uint16_t hfp_service_handler;
+
+}bt_runtime_status_t;
+/**
+ * cat1_powerOn 0,1
+ * volte volte开关
+ * network_on 0,1
+ * cat1_network_type, 0, 无网络， 1 GSM，2 3G ， 4 4G/LTE
+ * sim 1,0
+ * signal 1,31 ; 99 no signal
+ * opera -1 , "CNUTS"
+ * imei
+ * pyVer
+ * modemVer
+*/
+typedef struct
+{
+ uint8_t cat1_powerOn;
+ uint8_t volte ;
+ uint8_t network_on ;
+ uint8_t cat1_network_type ;
+ int sim ;
+ int signal ;
+ char opera[20] ;
+ char imei[20] ;
+ char pyVer[20] ;
+ char modemVer[64] ;
+}cat1_runtime_status_t;
+
+/**
+ * 设备实时状态记录
+ * in_silent_mode 勿扰模式 1 勿扰模式， 0 正常模式
+ * in_lowpower_mode 低电模式 1 低电模式， 0 正常模式
+ * stepcount 步数
+ * bt_powerOn 蓝牙开关 1 开 ， 0 关
+ * bt_ble_connectstat 设备已连接手机 1连接， 0 未连接
+ * bt_br_connectstat 经典蓝牙连接状态 0 未连接， 1 连接a2dp 2 连接hfp 3 连接 a2dp+hfp
+ * bt_earphone_connectstat 连接耳机状态 1连接， 0 未连接
+ * android_app_connected , 0 not connected, 1 android connected
+ * cat1_runtime cat1实时状态，详见 cat1_runtime_status_t 定义
+ * */
+typedef struct
+{
+ uint8_t in_silent_mode;
+ uint8_t in_lowpower_mode;
+ uint8_t stepcount;
+
+ bt_runtime_status_t bt_runtime;
+ cat1_runtime_status_t cat1_runtime;
+ char current_dial_name[32];
+ uint8_t time_hour_show_model;
+} runtime_status_t;
+
+
static runtime_status_t g_runtime={0};
-runtime_status_t * get_device_runtime_status(void)
+// runtime_status_t * get_device_runtime_status(void)
+// {
+// return &g_runtime;
+// }
+
+
+void uapi_dev_runtime_set_cat1_powerstat(uint8_t cat1_powerOn)
+{
+ g_runtime.cat1_runtime.cat1_powerOn=cat1_powerOn;
+}
+uint8_t uapi_dev_runtime_get_cat1_powerstat(void)
+{
+ return g_runtime.cat1_runtime.cat1_powerOn;
+}
+
+void uapi_dev_runtime_set_cat1_networkstat(uint8_t network_on)
+{
+ g_runtime.cat1_runtime.network_on=network_on;
+}
+uint8_t uapi_dev_runtime_get_cat1_networkstat(void)
+{
+ return g_runtime.cat1_runtime.network_on;
+}
+
+
+void uapi_dev_runtime_set_cat1_signal(int signal)
+{
+ g_runtime.cat1_runtime.signal=signal;
+}
+int uapi_dev_runtime_get_cat1_signal(void)
+{
+ return g_runtime.cat1_runtime.signal;
+}
+
+void uapi_dev_runtime_set_cat1_simstat(int simstat)
+{
+ g_runtime.cat1_runtime.sim=simstat;
+}
+int uapi_dev_runtime_get_cat1_simstat(void)
+{
+ return g_runtime.cat1_runtime.sim;
+}
+
+void uapi_dev_runtime_set_cat1_networktype(uint8_t networtype)
{
- return &g_runtime;
+ g_runtime.cat1_runtime.cat1_network_type=networtype;
+}
+uint8_t uapi_dev_runtime_get_cat1_networtype(void)
+{
+ return g_runtime.cat1_runtime.cat1_network_type;
+}
+
+
+void uapi_dev_runtime_set_cat1_operator(char* cat1_operator)
+{
+ if (cat1_operator == NULL) return;
+ int len=strlen((char*)cat1_operator);
+ memset_s(g_runtime.cat1_runtime.opera,sizeof(g_runtime.cat1_runtime.opera),0,sizeof(g_runtime.cat1_runtime.opera));
+ memcpy_s(g_runtime.cat1_runtime.opera,sizeof(g_runtime.cat1_runtime.opera),cat1_operator,len);
+}
+char* uapi_dev_runtime_get_cat1_operator(void)
+{
+ return (char*)g_runtime.cat1_runtime.opera;
+}
+
+void uapi_dev_runtime_set_cat1_imei(char* imei)
+{
+ if (imei == NULL) return;
+ int len=strlen((char*)imei);
+ memset_s(g_runtime.cat1_runtime.opera,sizeof(g_runtime.cat1_runtime.opera),0,sizeof(g_runtime.cat1_runtime.opera));
+ memcpy_s(g_runtime.cat1_runtime.opera,sizeof(g_runtime.cat1_runtime.opera),imei,len);
+}
+char* uapi_dev_runtime_get_cat1_imei(void)
+{
+ return (char*)g_runtime.cat1_runtime.imei;
+}
+
+void uapi_dev_runtime_set_cat1_pyver(char* pyver)
+{
+ if (pyver == NULL) return;
+ int len=strlen((char*)pyver);
+ memset_s(g_runtime.cat1_runtime.opera,sizeof(g_runtime.cat1_runtime.opera),0,sizeof(g_runtime.cat1_runtime.opera));
+ memcpy_s(g_runtime.cat1_runtime.opera,sizeof(g_runtime.cat1_runtime.opera),pyver,len);
+}
+char* uapi_dev_runtime_get_cat1_pyver(void)
+{
+ return (char*)g_runtime.cat1_runtime.pyVer;
+}
+
+void uapi_dev_runtime_set_cat1_modemver(char* modemver)
+{
+ if (modemver == NULL) return;
+ int len=strlen((char*)modemver);
+ memset_s(g_runtime.cat1_runtime.opera,sizeof(g_runtime.cat1_runtime.opera),0,sizeof(g_runtime.cat1_runtime.opera));
+ memcpy_s(g_runtime.cat1_runtime.opera,sizeof(g_runtime.cat1_runtime.opera),modemver,len);
+}
+char* uapi_dev_runtime_get_cat1_modemver(void)
+{
+ return (char*)g_runtime.cat1_runtime.modemVer;
}
+/**
+ * 设置 dialname
+*/
+void uapi_dev_runtime_set_dialname(char* dialname)
+{
+
+ if (dialname == NULL) return;
+ //在runtime中备份一个安装文件名。
+ int dialnamelen=strlen((char*)dialname);
+ memset_s(g_runtime.current_dial_name,sizeof(g_runtime.current_dial_name),0,sizeof(g_runtime.current_dial_name));
+ memcpy_s(g_runtime.current_dial_name,sizeof(g_runtime.current_dial_name),dialname,dialnamelen);
+}
+/**
+ * 获取 dialname
+*/
+char* uapi_dev_runtime_get_dialname(void)
+{
+ return (char*)&(g_runtime.current_dial_name[0]);
+}
void uapi_dev_runtime_set_bt_powerstat(uint8_t stat)
{
- g_runtime.bt_powerOn = stat;
+ g_runtime.bt_runtime.bt_powerOn = stat;
}
void uapi_dev_runtime_set_ble_connect_stat(uint8_t connect)
{
- g_runtime.bt_ble_connectstat = connect;
+ g_runtime.bt_runtime.bt_ble_connectstat = connect;
}
void uapi_dev_runtime_set_br_connect_stat(uint8_t connect)
{
- g_runtime.bt_br_connectstat = connect;
+ g_runtime.bt_runtime.bt_br_connectstat = connect;
}
void uapi_dev_runtime_set_earphone_connect_stat(uint8_t connect)
{
- g_runtime.bt_earphone_connectstat = connect;
+ g_runtime.bt_runtime.bt_earphone_connectstat = connect;
}
uint8_t uapi_dev_runtime_get_bt_powerstat(void)
{
- return g_runtime.bt_powerOn ;
+ return g_runtime.bt_runtime.bt_powerOn ;
}
uint8_t uapi_dev_runtime_get_ble_connect_stat(void)
{
- return g_runtime.bt_ble_connectstat;
+ return g_runtime.bt_runtime.bt_ble_connectstat;
}
uint8_t uapi_dev_runtime_get_br_connect_stat(void)
{
- return g_runtime.bt_br_connectstat ;
+ return g_runtime.bt_runtime.bt_br_connectstat ;
}
uint8_t uapi_dev_runtime_get_earphone_connect_stat(void)
{
- return g_runtime.bt_earphone_connectstat ;
+ return g_runtime.bt_runtime.bt_earphone_connectstat ;
}
void uapi_dev_runtime_set_android_connection_status(uint8_t is_android)
{
- g_runtime.android_app_connected = is_android;
+ g_runtime.bt_runtime.android_app_connected = is_android;
}
uint8_t uapi_dev_runtime_get_android_connection_status(void)
{
- return g_runtime.android_app_connected;
+ return g_runtime.bt_runtime.android_app_connected;
}
uint8_t uapi_dev_runtime_get_time_hour_show_model(void)
{
uint16_t timezone_quarters=uapi_get_timezone();
set_timezone_quarters(timezone_quarters);
-
set_hour_show_model(g_runtime.time_hour_show_model);
-
-
+}
+
+void uapi_dev_runtime_set_ancs_clientid(uint16_t clientid)
+{
+ g_runtime.bt_runtime.ble_ancs_client_id = clientid;
+}
+
+uint16_t uapi_dev_runtime_get_ancs_clientid(void)
+{
+ return g_runtime.bt_runtime.ble_ancs_client_id;
}
\ No newline at end of file
CAT1_5G
} cat1_network_type_t;
-
/**
- * cat1_powerOn 0,1
- * volte volte开关
- * network_on 0,1
- * cat1_network_type, 0, 无网络， 1 GSM，2 3G ， 4 4G/LTE
- * sim 1,0
- * signal 1,31 ; 99 no signal
- * opera -1 , "CNUTS"
- * imei
- * pyVer
- * modemVer
+ * 获取 设备实时状态变量
+ * 详细内容见 runtime_status_t 定义
*/
-typedef struct
-{
- uint8_t cat1_powerOn;
- uint8_t volte ;
- uint8_t network_on ;
- uint8_t cat1_network_type ;
- int sim ;
- int signal ;
- char opera[20] ;
- char imei[20] ;
- char pyVer[20] ;
- char modemVer[64] ;
-}cat1_runtime_status_t;
+// runtime_status_t * get_device_runtime_status(void);
/**
- * 设备实时状态记录
- * in_silent_mode 勿扰模式 1 勿扰模式， 0 正常模式
- * in_lowpower_mode 低电模式 1 低电模式， 0 正常模式
- * stepcount 步数
- * bt_powerOn 蓝牙开关 1 开 ， 0 关
- * bt_ble_connectstat 设备已连接手机 1连接， 0 未连接
- * bt_br_connectstat 经典蓝牙连接状态 0 未连接， 1 连接a2dp 2 连接hfp 3 连接 a2dp+hfp
- * bt_earphone_connectstat 连接耳机状态 1连接， 0 未连接
- * android_app_connected , 0 not connected, 1 android connected
- * cat1_runtime cat1实时状态，详见 cat1_runtime_status_t 定义
- * */
-typedef struct
-{
- uint8_t in_silent_mode;
- uint8_t in_lowpower_mode;
- uint8_t stepcount;
- uint8_t bt_powerOn;
- uint8_t bt_ble_connectstat;
- uint8_t bt_br_connectstat;
- uint8_t bt_earphone_connectstat;
- uint8_t android_app_connected;
- cat1_runtime_status_t cat1_runtime;
- uint8_t current_dial_name[32];
- uint8_t time_hour_show_model;
-} runtime_status_t;
-
+ * 设置 dialname
+*/
+void uapi_dev_runtime_set_dialname(char* dialname);
/**
- * 获取 设备实时状态变量
- * 详细内容见 runtime_status_t 定义
+ * 获取 dialname
*/
-runtime_status_t * get_device_runtime_status(void);
+char* uapi_dev_runtime_get_dialname(void);
+
+/***************************************cat1 runtime 变量设置获取函数**************************************************/
+
+
+void uapi_dev_runtime_set_cat1_powerstat(uint8_t cat1_powerOn);
+uint8_t uapi_dev_runtime_get_cat1_powerstat(void);
+
+void uapi_dev_runtime_set_cat1_networkstat(uint8_t network_on);
+uint8_t uapi_dev_runtime_get_cat1_networkstat(void);
+
+void uapi_dev_runtime_set_cat1_signal(int signal);
+int uapi_dev_runtime_get_cat1_signal(void);
+
+void uapi_dev_runtime_set_cat1_simstat(int simstat);
+int uapi_dev_runtime_get_cat1_simstat(void);
+
+void uapi_dev_runtime_set_cat1_networktype(uint8_t networtype);
+uint8_t uapi_dev_runtime_get_cat1_networtype(void);
+
+
+void uapi_dev_runtime_set_cat1_operator(char* cat1_operator);
+char* uapi_dev_runtime_get_cat1_operator(void);
+
+void uapi_dev_runtime_set_cat1_imei(char* cat1_operator);
+char* uapi_dev_runtime_get_cat1_imei(void);
+
+void uapi_dev_runtime_set_cat1_pyver(char* cat1_operator);
+char* uapi_dev_runtime_get_cat1_pyver(void);
+
+void uapi_dev_runtime_set_cat1_modemver(char* cat1_operator);
+char* uapi_dev_runtime_get_cat1_modemver(void);
+/***************************************蓝牙runtime 变量设置获取函数**************************************************/
/**
* 设置蓝牙开关状态
*/
uint8_t uapi_dev_runtime_get_time_hour_show_model(void);
void uapi_dev_runtime_set_time_hour_show_model(uint8_t hour_type);
+void uapi_dev_runtime_set_ancs_clientid(uint16_t clientid);
+uint16_t uapi_dev_runtime_get_ancs_clientid(void);
projects / mirrors / FD230.git / commitdiff