'ENABLE_ECC',
'FT_SINGLE_UART',
'PPG_HX3695',
- 'ACC_LIS2DOC',
- # 'ENABLE_CYWEE',
- # 'SUPPORT_AT_CYWEE',
+ # 'ACC_LIS2DOC',
+ 'ENABLE_CYWEE',
+ 'SUPPORT_AT_CYWEE',
'MAG_MMC5603',
'ENABLE_VIBRATOR',
'ENABLE_SLIP',
'graphic_at_service',
'app_at_service',
'ohosfwk_at_service',
- 'audio_at_service',
- 'media_at_service',
- 'bt_manager_at_service',
+ # 'audio_at_service',
+ # 'media_at_service',
+ # 'bt_manager_at_service',
"audio_proc", "audio_dump", "audio_probe", "power_manager", "gpu_proc", 'bts_header',
"ppg_sensor",
"mag_sensor",
#"nativelauncher",
"fd230launcher",
"ppg_service",
- "acc_sensor",
- # "cywee",
+ # "acc_sensor",
+ "cywee",
"batterry_service",
"ble_service",
"hid_service"
'ram_component_set': ['bgh', 'media', 'gpu', 'graphic_uikit', 'bgh_audio', 'dfx_set', 'ohos_set', 'wearable_set', 'alipay_set'],
'dsp_version': 'max',
'packet': True,
+ 'image_analysis': False,
# 'fs_image_path':'evb4',
'fs_image_path':'fd230',
'fs_image': True
*/
-#define DEFAULT_POWERON_CAT1 1
+#define DEFAULT_POWERON_CAT1 0
//需要配置默认输出的，以及需要配置默认输入中断函数的。
const hal_gpio_config_t g_gpio_function_config[PIN_MAX_NUMBER] = {
set(COMPONENT_NAME "cywee")
set(SOURCES ${SOURCES}
- # ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+ ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
${CMAKE_CURRENT_SOURCE_DIR}/src/main_dml.c
${CMAKE_CURRENT_SOURCE_DIR}/src/test_api.c
${CMAKE_CURRENT_SOURCE_DIR}/src/board_yh601s.c
--- /dev/null
+#ifndef __CWM_LIB_H__
+#define __CWM_LIB_H__
+
+#include "CWM_EventStructure.h"
+#include "OsApi.h"
+#include "CWM_CustomDataStruct.h"
+
+/**
+ * @brief Setting Control control ID
+ * @api CWM_SettingControl
+ * @param CtrId
+ */
+#define SCL_LOG 0
+#define SCL_USER_INFO 1
+#define SCL_DATE_TIME 2
+#define SCL_SEDENTARY 3
+#define SCL_PEDO_RESET 4 // old
+#define SCL_RESET_DAILY_INFO 4 // new
+#define SCL_REQ_SLEEPING_DATA 5
+#define SCL_LOW_POWER_MODE 6
+#define SCL_SET_ACTIVITY_MODE 7
+#define SCL_GET_CHIP_INFO 8
+#define SCL_ACTIVITY_CONFIG 9
+#define SCL_LIB_DEBUG 10
+#define SCL_PEDO_CONFIG 11
+#define SCL_GET_LIB_INFO 12
+#define SCL_SWIM_CONFIG 13
+#define SCL_BIKING_CONFIG 14
+#define SCL_ACTIVITY_PAUSE 15
+#define SCL_HAND_UPDOWN_CONFIG 16
+#define SCL_CHIP_VENDOR_CONFIG 17
+#define SCL_SLEEP_CONFIG 18
+#define SCL_ABS_STATIC_CONFIG 19
+#define SCL_HEART_RATE_CONFIG 20
+#define SCL_REQ_SWIM_EXIT 21
+#define SCL_WATCH_FALL_CONFIG 22
+#define SCL_AR_ALERT_CONFIG 23
+#define SCL_WM_CONFIG 25
+#define SCL_INACTIVITY_CONFIG 26
+#define SCL_SET_INACTIVITY_MODE 27
+#define SCL_STAND_CONFIG 28
+#define SCL_SS_CONFIG 29
+#define SCL_ACT_INFO_CONFIG 30
+#define SCL_REQ_ACTIVITY_EXIT 31
+#define SCL_ACT_PAI_INFO 33
+#define SCL_ACT_INTSY_INFO 35
+#define SCL_DUMP_WI_INFO 36
+#define SCL_ACT_ZONE_TIME 37
+#define SCL_ACT_TRAINING_INFO 38
+#define SCL_WATCH_INTF_RESET 40
+#define SCL_PEDO_CONFIG2 42
+#define SCL_HG_INTF_CONFIG 43
+#define SCL_ACT_AUTO_PAUSE_CFG 44
+#define SCL_AR_ALERT2_CONFIG 45
+#define SCL_WI_SENS_REQ_CFG 46
+#define SCL_ACT_SA_METR_INFO 47
+#define SCL_SLEEP_ALARM_CFG 48
+#define SCL_FITNESS_INFO 49
+#define SCL_SZ_BREACH_CONFIG 50
+#define SCL_ACT_PAI_INFO2 51
+
+#define SCL_ALGO_PROC_CONFIG 100
+#define SCL_INPUT_SENSOR_CONFIG 101
+#define SCL_INPUT_DT_CONFIG 102
+#define SCL_SENS_RANGE_DETECT_CONFIG 103
+#define SCL_SENS_CALI_CONFIG 110
+#define SCL_SENS_CALI_CTRL_MAG 111
+#define SCL_SENS_CALI_CTRL_A 112
+#define SCL_SPV_CONFIG 113
+#define SCL_SPV_MODE 114
+#define SCL_SENS_CALI_SET_MAG 115
+#define SCL_SENS_CALI_SET_A 116
+
+#define SCL_SIN_HR_EXT 200
+
+/**
+ * @brief Custom Sensor Input sensorId
+ * @api CWM_CustomSensorInput
+ * @param CustomSensorData.sensorType extSensorId
+ * @
+ * @api CWM_CustomSensorInput_Fifo_Start CWM_CustomSensorInput_Fifo_End
+ * @param extSensorId
+ */
+#define CUSTOM_ACC 0
+#define CUSTOM_GYRO 1
+#define CUSTOM_MAG 2
+#define CUSTOM_BARO 3
+#define CUSTOM_TEMP 4
+#define CUSTOM_HEARTRATE 5
+#define CUSTOM_GNSS 6
+#define CUSTOM_OFFBODY_DETECT 7
+#define CUSTOM_ON_CHARGING 8
+#define CUSTOM_ACC_ANY_MOTION 9
+#define CUSTOM_SENS1 10
+
+
+/**
+ * @brief sensor enable/disable
+ * @api CWM_Sensor_Enable CWM_Sensor_Disable
+ * @param sensorId
+ */
+#define IDX_ACCEL 0
+#define IDX_GYRO 1
+#define IDX_MAG 2
+#define IDX_BARO 3
+#define IDX_TEMP 4
+#define IDX_HEARTRATE 5
+#define IDX_GNSS 6
+#define IDX_OFFBODY_DETECT 7
+#define IDX_ALGO_SEDENTARY 8
+#define IDX_ALGO_WATCH_HANDUP 9
+#define IDX_ALGO_SLEEP 10
+#define IDX_REQUEST_SENSOR 11
+#define IDX_ALGO_SHAKE 13
+#define IDX_ALGO_ACTIVITY_OUTPUT 14
+#define IDX_ALGO_ANY_MOTION 15
+#define IDX_ALGO_NO_MOTION 16
+#define IDX_ALGO_FALLING 17
+#define IDX_ONCHARGING_DETECT 18
+#define IDX_ALGO_ABSOLUTE_STATIC 19
+#define IDX_ALGO_SPV 20
+#define IDX_ALGO_SENS_CALIBRATION 21
+#define IDX_ALGO_INACTIVITY_OUTPUT 22
+#define IDX_ALGO_STAND 23
+#define IDX_ALGO_SENS_RANGE_DETECT 24
+
+/**
+ * @brief activity mode setting
+ * @api CWM_SettingControl
+ * @param SCL_SET_ACTIVITY_MODE
+ */
+#define ACTIVITY_MODE_NORMAL 1001
+
+typedef struct {
+ int iData[16];
+} SettingControl_t;
+
+typedef void (*FN_SENSOR_LISTEN)(pSensorEVT_t);
+
+
+#define LOS_DATA_TYPE_INT 0
+#define LOS_DATA_TYPE_STR 1
+
+/**
+ * @brief
+ * @param dataType: cmd data type indicater
+ * 0 (LOS_DATA_TYPE_INT): int type data, dataInt accessible
+ * 1 (LOS_DATA_TYPE_STR): string type data, *dataStr and dataStr_length accessible
+ */
+typedef struct {
+ const char *optionString;
+ const char *sectionName;
+ const char *apiName;
+ int cmdId;
+ int dataType;
+ int dataInt[16];
+ const char *dataStr;
+ int dataStr_length;
+} los_cmd_data_t;
+
+typedef void (*FN_LOS_CMD_EXECUTE)(los_cmd_data_t *);
+
+/**
+ * @brief CyweeMotion internal process Initial
+ */
+void CWM_LibPreInit(OsAPI *api);
+
+/**
+ * @brief Sensor Event register callback, when sensor event is triggered,
+ * this function will be called to notify
+ */
+void CWM_LibPostInit(FN_SENSOR_LISTEN pfn);
+
+/**
+ * @brief lib deinit for special case. Not any situation can be used normally
+ */
+void CWM_LibDeinit(void);
+
+/**
+ * @brief Sensor enable based on sensor index provided
+ * @param sensorId: sensor register handle, if not setup this handle don't care
+ * @retval 0 is success, otherwise is failed
+ */
+int CWM_Sensor_Enable(uint32_t sensorId);
+
+/**
+ * @brief Sensor disable based on sensor index provided
+ * @param sensorId: sensor register handle, if not setup this handle don't care
+ * @retval 0 is success, otherwise is failed
+ */
+int CWM_Sensor_Disable(uint32_t sensorId);
+
+/**
+ * @brief Read sensor data and output through sensor call-back function
+ * @retval 0 is no data to process, mcu can enter low power mode,
+ otherwise has some data needs process this function again.
+ */
+int CWM_process(void);
+
+/**
+ * @brief Read sensor data and output through sensor call-back function
+ */
+int CWM_process2(int dt_us);
+
+/**
+ * @brief Get how many event in CyweeMotion Library to be processed
+ * @retval 0 is no data to process, mcu can enter low power mode,
+ otherwise has some data
+ */
+int CWM_IsReadyForProcess(void);
+
+/**
+ * @brief Put custom sensor data.
+ * @param SensorDataInput: sensor data input handle, input format as below:
+ * sensorType= CustomSensorDataIndex
+ * fData = sensor raw data
+ * @retval 0 is success, otherwise is failed
+ */
+int CWM_CustomSensorInput(CustomSensorData *SensorDataInput);
+
+/**
+ * @brief Get the duration time of the next event
+ * @retval the duration time (unit nanosecond)
+ */
+int64_t CWM_GetNextActionDuration_ns(void);
+
+/**
+ * @brief set lib config
+ * @param Control ID
+ * @param Setting control array
+ * @retval 0 is success, otherwise is failed
+ */
+int CWM_SettingControl(int CtrId, SettingControl_t *pData);
+
+/**
+ * @brief Fifo initial
+ * @param max recored number of acc fifo
+ */
+void CWM_CustomSensorInput_Fifo_Init(int maxRecords_Acc);
+
+/**
+ * @brief setting lib can start input fifo
+ * @param sensor ID
+ * @param timestamp that interrupt trigger to read hw fifo data
+ * @param fifo delta_time
+ * @retval 0 is success, otherwise is failed
+ */
+int CWM_CustomSensorInput_Fifo_Start(uint32_t extSensorId, uint64_t triggerFifoRead_timeStamp_ns, uint64_t dt_ns);
+
+/**
+ * @brief setting lib to stop input fifo
+ * @param sensor ID
+ */
+void CWM_CustomSensorInput_Fifo_End(uint32_t extSensorId);
+
+/**
+ * @brief Execute option string
+ * @param optionString
+ * @param sectionString section execute order
+ * @param custCallbackFunc custom option string execute function
+ * @param skipExeDefault don't execute default command
+ */
+void CWM_LoadOptionString(const char *optionString, const char *sectionString, FN_LOS_CMD_EXECUTE custCallbackFunc, int skipExeDefault);
+#endif
-#ifndef __CWM_LIB_H__
-#define __CWM_LIB_H__
+#ifndef ___CWM_LIB__H_
+#define ___CWM_LIB__H_
+#include <stdint.h>
+#include "os_api.h"
#include "CWM_EventStructure.h"
-#include "OsApi.h"
#include "CWM_CustomDataStruct.h"
-/**
- * @brief Setting Control control ID
- * @api CWM_SettingControl
- * @param CtrId
- */
#define SCL_LOG 0
#define SCL_USER_INFO 1
#define SCL_DATE_TIME 2
#define SCL_SEDENTARY 3
-#define SCL_PEDO_RESET 4 // old
-#define SCL_RESET_DAILY_INFO 4 // new
+#define SCL_PEDO_RESET 4
#define SCL_REQ_SLEEPING_DATA 5
#define SCL_LOW_POWER_MODE 6
#define SCL_SET_ACTIVITY_MODE 7
#define SCL_REQ_SWIM_EXIT 21
#define SCL_WATCH_FALL_CONFIG 22
#define SCL_AR_ALERT_CONFIG 23
+#define SCL_ACT_PAUSE_DETECT 24
#define SCL_WM_CONFIG 25
#define SCL_INACTIVITY_CONFIG 26
#define SCL_SET_INACTIVITY_MODE 27
#define SCL_SS_CONFIG 29
#define SCL_ACT_INFO_CONFIG 30
#define SCL_REQ_ACTIVITY_EXIT 31
+#define SCL_TAP_CONFIG 32
#define SCL_ACT_PAI_INFO 33
+#define SCL_HAND_WRIST_CONFIG 34
#define SCL_ACT_INTSY_INFO 35
#define SCL_DUMP_WI_INFO 36
#define SCL_ACT_ZONE_TIME 37
#define SCL_ACT_TRAINING_INFO 38
+#define SCL_HAND_SHAKE_CONFIG 39
#define SCL_WATCH_INTF_RESET 40
+#define SCL_HAND_RUB_CONFIG 41
#define SCL_PEDO_CONFIG2 42
#define SCL_HG_INTF_CONFIG 43
#define SCL_ACT_AUTO_PAUSE_CFG 44
#define SCL_ALGO_PROC_CONFIG 100
#define SCL_INPUT_SENSOR_CONFIG 101
#define SCL_INPUT_DT_CONFIG 102
-#define SCL_SENS_RANGE_DETECT_CONFIG 103
+#define SCL_SENS_RANGE_DETECT_CONFIG 103
#define SCL_SENS_CALI_CONFIG 110
#define SCL_SENS_CALI_CTRL_MAG 111
#define SCL_SENS_CALI_CTRL_A 112
#define SCL_SPV_CONFIG 113
+#define SCL_FACTORY_CALI_CONFIG 113
#define SCL_SPV_MODE 114
+#define SCL_FACTORY_CALI_MODE 114
#define SCL_SENS_CALI_SET_MAG 115
#define SCL_SENS_CALI_SET_A 116
+#define SCL_SENS_CALI_CTRL_A2 117
+
+#define SCL_GET_HEAP_INFO 120
+#define SCL_SEC_VERIFY_CLIENT 150
+#define SCL_SEC_VERIFY_SERVER 151
#define SCL_SIN_HR_EXT 200
+#define SCL_HS_ORIEN_CONFIG 300
+#define SCL_HS_ORIEN_CTRL_EXC 301
+#define SCL_HS_ORIEN_RESET 302
+#define SCL_HS_PHONE_CONFIG 303
+#define SCL_EAR_FALL_CONFIG 304
+#define SCL_HS_PHONE_CONFIG2 305
+#define SCL_HS_RUN_INIT_ANGLE 306
+#define SCL_HS_INTF_CONFIG 307
+#define SCL_HS_INTF_RESTART 308
+#define SCL_HS_GESTURE_CONFIG 309
+#define SCL_HS_NECK_HT_CONFIG 310
+#define SCL_HS_ORIEN_CTRL_SYNC 311
+
+#define SCL_FUSION_MOUSE_CONFIG 501
+#define SCL_PEDO_POD_CONFIG 502
+#define SCL_PEDO_POD_TR_CALI 503
+#define SCL_PEDO_POD_RUN_CMD 504
+
+#define SCL_GLASSES_MOT_CONFIG 510
+#define SCL_GLASSES_MOT_LEVEL 511
+#define SCL_GLASSES_MOT_CALI_CTRL 512
+#define SCL_GLASSES_MOT_CMD 513
+
/**
* @brief Custom Sensor Input sensorId
* @api CWM_CustomSensorInput
* @param CustomSensorData.sensorType extSensorId
* @
- * @api CWM_CustomSensorInput_Fifo_Start CWM_CustomSensorInput_Fifo_End
- * @param extSensorId
*/
#define CUSTOM_ACC 0
#define CUSTOM_GYRO 1
#define IDX_HEARTRATE 5
#define IDX_GNSS 6
#define IDX_OFFBODY_DETECT 7
-#define IDX_ALGO_SEDENTARY 8
-#define IDX_ALGO_WATCH_HANDUP 9
-#define IDX_ALGO_SLEEP 10
#define IDX_REQUEST_SENSOR 11
-#define IDX_ALGO_SHAKE 13
-#define IDX_ALGO_ACTIVITY_OUTPUT 14
#define IDX_ALGO_ANY_MOTION 15
#define IDX_ALGO_NO_MOTION 16
-#define IDX_ALGO_FALLING 17
#define IDX_ONCHARGING_DETECT 18
#define IDX_ALGO_ABSOLUTE_STATIC 19
#define IDX_ALGO_SPV 20
+#define IDX_ALGO_FACTORY_CALI 20
#define IDX_ALGO_SENS_CALIBRATION 21
-#define IDX_ALGO_INACTIVITY_OUTPUT 22
-#define IDX_ALGO_STAND 23
#define IDX_ALGO_SENS_RANGE_DETECT 24
-/**
- * @brief activity mode setting
- * @api CWM_SettingControl
- * @param SCL_SET_ACTIVITY_MODE
- */
-#define ACTIVITY_MODE_NORMAL 1001
-
typedef struct {
int iData[16];
} SettingControl_t;
+
typedef void (*FN_SENSOR_LISTEN)(pSensorEVT_t);
typedef void (*FN_LOS_CMD_EXECUTE)(los_cmd_data_t *);
+
/**
* @brief CyweeMotion internal process Initial
*/
-void CWM_LibPreInit(OsAPI *api);
+void CWM_LibPreInit(os_api *api);
/**
- * @brief Sensor Event register callback, when sensor event is triggered,
+ * @brief Sensor Event register callback, when sensor event is triggered,
* this function will be called to notify
*/
void CWM_LibPostInit(FN_SENSOR_LISTEN pfn);
-/**
- * @brief lib deinit for special case. Not any situation can be used normally
- */
-void CWM_LibDeinit(void);
-
/**
* @brief Sensor enable based on sensor index provided
* @param sensorId: sensor register handle, if not setup this handle don't care
*/
int CWM_Sensor_Disable(uint32_t sensorId);
-/**
- * @brief Read sensor data and output through sensor call-back function
- * @retval 0 is no data to process, mcu can enter low power mode,
- otherwise has some data needs process this function again.
- */
-int CWM_process(void);
-
/**
* @brief Read sensor data and output through sensor call-back function
*/
int CWM_process2(int dt_us);
-/**
- * @brief Get how many event in CyweeMotion Library to be processed
- * @retval 0 is no data to process, mcu can enter low power mode,
- otherwise has some data
- */
-int CWM_IsReadyForProcess(void);
-
/**
* @brief Put custom sensor data.
* @param SensorDataInput: sensor data input handle, input format as below:
int CWM_CustomSensorInput(CustomSensorData *SensorDataInput);
/**
- * @brief Get the duration time of the next event
- * @retval the duration time (unit nanosecond)
- */
-int64_t CWM_GetNextActionDuration_ns(void);
-
-/**
- * @brief set lib config
+ * @brief Switch log output by input parameters
* @param Control ID
* @param Setting control array
* @retval 0 is success, otherwise is failed
*/
int CWM_SettingControl(int CtrId, SettingControl_t *pData);
-/**
- * @brief Fifo initial
- * @param max recored number of acc fifo
- */
-void CWM_CustomSensorInput_Fifo_Init(int maxRecords_Acc);
-
-/**
- * @brief setting lib can start input fifo
- * @param sensor ID
- * @param timestamp that interrupt trigger to read hw fifo data
- * @param fifo delta_time
- * @retval 0 is success, otherwise is failed
- */
-int CWM_CustomSensorInput_Fifo_Start(uint32_t extSensorId, uint64_t triggerFifoRead_timeStamp_ns, uint64_t dt_ns);
-
-/**
- * @brief setting lib to stop input fifo
- * @param sensor ID
- */
-void CWM_CustomSensorInput_Fifo_End(uint32_t extSensorId);
-
/**
* @brief Execute option string
* @param optionString
* @param custCallbackFunc custom option string execute function
* @param skipExeDefault don't execute default command
*/
-void CWM_LoadOptionString(const char *optionString, const char *sectionString, FN_LOS_CMD_EXECUTE custCallbackFunc, int skipExeDefault);
-#endif
+void CWM_LoadOptionString(const char *optionString, \
+ const char *sectionString, \
+ FN_LOS_CMD_EXECUTE custCallbackFunc, \
+ int skipExeDefault);
+
+#endif //___CWM_LIB__H_
--- /dev/null
+#ifndef __OS_API_H__
+#define __OS_API_H__
+
+typedef struct{
+ int (*dbgOutput)(const char*);
+ uint64_t (*GetTimeNs)(void);
+ void (*uSleep)(uint32_t);
+ int (*i2cRead)(uint16_t slaveAddr, uint16_t reg, int regLength, uint8_t *readData, int readDataSize, int busIndex);
+ int (*i2cWrite)(uint16_t slaveAddr, uint16_t reg, int regLength, uint8_t *writeData, int writeDataSize, int busIndex);
+ void *(*malloc)(int size);
+ void (*free)(void* ptr);
+ int (*spiRead)(uint16_t reg, int regLength, uint8_t *readData, int readDataSize, int busIndex);
+ int (*spiWrite)(uint16_t reg, int regLength, uint8_t *writeData, int writeDataSize, int busIndex);
+} os_api;
+
+typedef os_api OsAPI;
+
+#endif /* __OS_API_H__ */
int ret = ConvertCmdToParam(para, paraLen, argv, &argc);
if (ret != ERRCODE_SUCC) {
- PRINT_ERR("CYWEETEST ATCMD Convert Command Failed\n");
+ PRINT("CYWEETEST ATCMD Convert Command Failed\n");
return ERRCODE_FAIL;
}
if (argc < 1) {
- PRINT_ERR("CYWEETEST ATCMD Set Parameter Failed\n");
+ PRINT("CYWEETEST ATCMD Set Parameter Failed\n");
return ERRCODE_FAIL;
}
char *mode = (char*)argv[0];
if (strcmp(mode, "start") == 0) {
+ PRINT("cywee start\n");
do_cywee_service_check_msg(CYWEE_SERVICE_CMD_START_CHECK);
} else if (strcmp(mode, "stop") == 0) {
+ PRINT("cywee stop\n");
do_cywee_service_check_msg(CYWEE_SERVICE_CMD_STOP_CHECK);
} else if (strcmp(mode, "test") == 0) {
+ PRINT("cywee test\n");
do_cywee_service_check_msg(CYWEE_SERVICE_CMD_TEST);
}
return ERRCODE_SUCC;
}
}
-// #define TEST_CYWEE_LIB
-#ifdef TEST_CYWEE_LIB
-typedef struct {
- int iData[16];
-} SettingControl_t;
-#define SCL_GET_LIB_INFO 12
-#endif
static void cywee_service_check_task(void const *arg)
{
if (mail.cmd == CYWEE_SERVICE_CMD_TIMER_CHECK) {
cywee_int_handler();
// lis2doc_read_data();
- // printf("CYWEE_SERVICE_CMD_TIMER_CHECK\r\n");
+ printf("CYWEE_SERVICE_CMD_TIMER_CHECK\r\n");
}else if (mail.cmd == CYWEE_SERVICE_CMD_TEST){
test_api();
}else if (mail.cmd == CYWEE_SERVICE_CMD_START_CHECK){
cywee_service_running_stat = true;
- #ifdef TEST_CYWEE_LIB
- // SettingControl_t scl;
- // memset(&scl, 0, sizeof(scl));
- // scl.iData[0] = 1;
- // CWM_SettingControl(SCL_GET_LIB_INFO, &scl);
- printf("CYWEE_SERVICE_CMD_START_CHECK \r\n");
- // CWM_lib_init();
- #endif
cywee_main_dml();
cywee_service_timer_start_check(CYWEE_CHECK_MS);
}else if (mail.cmd == CYWEE_SERVICE_CMD_STOP_CHECK){
int CWM_OS_dbgOutput(const char * format)
{
- printf("%s", format);
+ PRINT("%s", format);
return 0;
}
int CWM_OS_dbgOutput_checkLog(const char * format)
{
static int s_sn = 0;
- printf("#_#|%d|%s", s_sn, format);
+ PRINT("#_#|%d|%s", s_sn, format);
s_sn ++;
return 0;
}
extern int CWM_OS_dbgPrintf(const char * format,...);
#define IDX_ALGO_ACTIVITY_OUTPUT 14
-void CWM_AP_SensorListen(SensorEVT_t *sensorEVT) {
-
- switch (sensorEVT->sensorType) {
- case 0:
- // printf("IDX[%d]: %.3f, %.3f, %.3f, %.3f, %.3f, %.3f, %.3f, %.3f\n", sensorEVT->sensorType,
- // sensorEVT->fData[0],
- // sensorEVT->fData[1],
- // sensorEVT->fData[2],
- // sensorEVT->fData[3],
- // sensorEVT->fData[4],
- // sensorEVT->fData[5],
- // sensorEVT->fData[6],
- // sensorEVT->fData[7]);
- break;
-
- case 1:
- // printf("IDX[%d]: %.3f, %.3f, %.3f, %.3f, %.3f, %.3f, %.3f, %.3f\n", sensorEVT->sensorType,
- // sensorEVT->fData[0],
- // sensorEVT->fData[1],
- // sensorEVT->fData[2],
- // sensorEVT->fData[3],
- // sensorEVT->fData[4],
- // sensorEVT->fData[5],
- // sensorEVT->fData[6],
- // sensorEVT->fData[7]);
- break;
-
- default:
- printf("IDX[%d]: %.3f, %.3f, %.3f, %.3f, %.3f, %.3f, %.3f, %.3f\n", sensorEVT->sensorType,
- sensorEVT->fData[0],
- sensorEVT->fData[1],
- sensorEVT->fData[2],
- sensorEVT->fData[3],
- sensorEVT->fData[4],
- sensorEVT->fData[5],
- sensorEVT->fData[6],
- sensorEVT->fData[7]);
- }
-}
+extern void CWM_AP_SensorListen(SensorEVT_t *sensorEVT) ;
void CWM_lib_init(void) {
os_api api = {
int cywee_main_dml(void) {
if (cywee_installized==1)
+ {
+ CWM_OS_dbgPrintf("cywee_installized skip install\n");
return 0;
+
+ }
cywee_installized = 1;
int i;
SettingControl_t scl;
projects / mirrors / FD230.git / commitdiff