#define AP_ENABLE_DML_SDO_LISTEN
-#define GSENSON_MSG_COUNT 16
+#define GSENSON_MSG_COUNT 8
static gsenson_t gxyz_t;
static uint8_t gsenson_falg=0;
static uint16 num_falg=0;
-static gsenson_t gxyz_t_queue[16]={0};
+static gsenson_t gxyz_t_queue[8]={0};
static int16 left_falg=0;
static int16 right_falg=-1;
static uint8_t hrs = 0;
-
uint8_t hrs_mode_state = 0;
-
-static uint8_t mail = 0;
+void hand_updown_switch(int cmd)
+{
+ if(cmd == 1)
+ CWM_Sensor_Enable(IDX_ALGO_WATCH_HANDUP);
+ else
+ CWM_Sensor_Disable(IDX_ALGO_WATCH_HANDUP);
+}
void get_sleep_data(void)
{
CWM_CustomSensorInput(&csd);
}
-void activity_mode_init(void)
-{
- if(hrs_mode_state == 1)
- {
- send_ppg_cmd_msg(PPG_SERVICE_CMD_TYPE_STOP_PPG_TEST);
- hrs_mode_state = 0;
- }
- if(mail == 1 && hrs_mode_state == 0)
- {
- send_ppg_cmd_msg(PPG_SERVICE_CMD_TYPE_DO_PPG_TEST);
- hrs_mode_state = 1;
- }else if(mail == 2)
- {
- send_ppg_cmd_msg(PPG_SERVICE_CMD_TYPE_DO_WEAR_MODE_TEST);
- }
-}
//0:resume , 1:pause
void activity_mode_setstatus(int cmd)
void cyw_activity_mode_change(int mode)
{
- activity_mode_init();
switch (mode)
{
//一般模式(生活模式)
if(num_falg)
{
left_falg++;
- left_falg=left_falg%16;
+ left_falg=left_falg%8;
num_falg--;
}
//static int flag=32;
void CWM_AP_SensorListen(pSensorEVT_t sensorEVT) {
-
cywee_msg_callback_t cywee_func;
switch (sensorEVT->sensorType) {
case IDX_ACCEL:
#if 1
- if(num_falg==16)
+ if(num_falg==8)
{
left_falg++;
right_falg++;
- right_falg=right_falg%16;
- left_falg=left_falg%16;
+ right_falg=right_falg%8;
+ left_falg=left_falg%8;
gxyz_t_queue[right_falg].x= sensorEVT->fData[0];
gxyz_t_queue[right_falg].y= sensorEVT->fData[1];
gxyz_t_queue[right_falg].z= sensorEVT->fData[2];
{
//left_falg++;
right_falg++;
- right_falg=right_falg%16;
+ right_falg=right_falg%8;
//left_falg=left_falg%16;
num_falg++;
gxyz_t_queue[right_falg].x= sensorEVT->fData[0];
break;
case IDX_ALGO_WATCH_HANDUP:
CWM_OS_dbgPrintf("HANDUP_DOWN MSG [%d]\n",(int)sensorEVT->fData[1]);
- uapi_take_to_wake((int)sensorEVT->fData[1]);
+ #if defined(SUPPORT_POWER_MANAGER)
+ const power_display_svr_api_t *display_api = power_display_svr_get_api();
+ #endif
+ if ((int)sensorEVT->fData[1] == 2)
+ {
+ #if defined(SUPPORT_POWER_MANAGER)
+ display_api->set_screen_set_keepon_timeout(0);
+ PRINT("[cwyee] turn_off_screen");
+ #endif
+ }else if ((int)sensorEVT->fData[1] == 1)
+ {
+ #if defined(SUPPORT_POWER_MANAGER)
+ if (display_api->get_screen_state() != SCREEN_ON) {
+ PRINT("[cwyee] turn_on_screen");
+ display_api->turn_on_screen();
+ }
+ display_api->set_screen_set_keepon_timeout(5000);
+ #endif
+ }
break;
case IDX_ALGO_SLEEP:
CWM_OS_dbgPrintf("IDX_ALGO_SLEEP\n");
{
memset(&csd, 0, sizeof(CUSTOM_OFFBODY_DETECT));
csd.sensorType = CUSTOM_OFFBODY_DETECT;
- csd.fData[0] = 0;
+ csd.fData[0] = 1;
CWM_CustomSensorInput(&csd);
}
}
{
memset(&csd, 0, sizeof(CUSTOM_ON_CHARGING));
csd.sensorType = CUSTOM_ON_CHARGING;
- csd.fData[0] = 1;
+ csd.fData[0] = 0;
CWM_CustomSensorInput(&csd);
}
}
if((int)sensorEVT->fData[1] == CUSTOM_HEARTRATE)
{
CWM_OS_dbgPrintf("CUSTOM_HEARTRATE !!! \r\n");
+ if((int)sensorEVT->fData[2] == 1)
+ {
+ send_ppg_cmd_msg(PPG_SERVICE_CMD_TYPE_DO_PPG_TEST);
+ hrs_mode_state = 1;
+ }
+ else
+ {
+ send_ppg_cmd_msg(PPG_SERVICE_CMD_TYPE_STOP_PPG_TEST);
+ hrs_mode_state = 0;
+ }
}
break;
case IDX_ALGO_SHAKE:
CWM_OS_dbgPrintf("IDX_ALGO_INACTIVITY_OUTPUT\n");
if((int)sensorEVT->fData[0] == 20)
{
- CWM_OS_dbgPrintf("inactivity_mode_number[%d], sedentary status[%d], stand freq[%d]\n",
+ CWM_OS_dbgPrintf("inactivity_mode_number[%d], sedentary status[%d], stand freq[%d], day[%d], hour[%d], min[%d]\n",
(int)sensorEVT->fData[15],
(int)sensorEVT->fData[2],
- (int)sensorEVT->fData[3]);
+ (int)sensorEVT->fData[3],
+ (int)sensorEVT->fData[8],
+ (int)sensorEVT->fData[9],
+ (int)sensorEVT->fData[10]);
memset(&c_inactivity_result_t,0,sizeof(cywee_inactivity_result_t));
c_inactivity_result_t.inactivity_mode = (int)sensorEVT->fData[15];
c_inactivity_result_t.sedentary_status = (int)sensorEVT->fData[2];
#endif
-int cywee_main_dml(int cmd)
+int cywee_main_dml(void)
{
- if(cmd == SPORT_ACTIVE_MODE_NORMAL)
- mail = 2;
- else
- mail = 1;
-
- if (cywee_installized==0)
+ if (cywee_installized == 1)
{
- cywee_installized = 1;
- int i;
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- CWM_SettingControl(SCL_GET_LIB_INFO, &scl);
- CWM_OS_dbgPrintf("version:%d.%d.%d.%d product:%d model:%d\n", scl.iData[1], scl.iData[2], scl.iData[3], scl.iData[4], scl.iData[5], scl.iData[6]);
- CWM_OS_dbgPrintf("[DBG] ach: %d\n", scl.iData[7]);
- #if USE_P813
- os_api api = {
- .GetTimeNs = CWM_OS_GetTimeNs,
- .dbgOutput = CWM_OS_dbgOutput,
- .i2cRead = CWM_OS_i2cRead,
- .i2cWrite = CWM_OS_i2cWrite,
- .uSleep = CWM_OS_uSleep,
- .free = CWM_OS_free,
- .malloc = CWM_OS_malloc,
- .spiRead = NULL,
- .spiWrite = NULL,
- };
- CWM_LibPreInit(&api);
-
- #else
- OsAPI apiOS = {
- .GetTimeNs = CWM_OS_GetTimeNs,
- .dbgOutput = CWM_OS_dbgOutput,
- .i2cRead = CWM_OS_i2cRead,
- .i2cWrite = CWM_OS_i2cWrite,
- .uSleep = CWM_OS_uSleep,
- .free = CWM_OS_free,
- .malloc = CWM_OS_malloc,
- .i2cTransfer = CWM_OS_i2cTransfer,
- .restoreData = CWM_OS_restoreData,
- .saveData = CWM_OS_saveData,
- .spiRead = NULL,
- .spiWrite = NULL,
- .securityCodeWrite = NULL,
- .setGpio = NULL,
- .enableGpioIRQ = NULL,
- .disableGpioIRQ = NULL,
- };
- CWM_LibPreInit(&apiOS);
- #endif
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+ CWM_OS_dbgPrintf("cywee installized !!! \r\n");
+ return 0;
+ }
- //set mcu_chip information, must call this before CWM_LibPostInit()
+ cywee_installized = 1;
+ int i;
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ CWM_SettingControl(SCL_GET_LIB_INFO, &scl);
+ CWM_OS_dbgPrintf("version:%d.%d.%d.%d product:%d model:%d\n", scl.iData[1], scl.iData[2], scl.iData[3], scl.iData[4], scl.iData[5], scl.iData[6]);
+ CWM_OS_dbgPrintf("[DBG] ach: %d\n", scl.iData[7]);
+#if USE_P813
+ os_api api = {
+ .GetTimeNs = CWM_OS_GetTimeNs,
+ .dbgOutput = CWM_OS_dbgOutput,
+ .i2cRead = CWM_OS_i2cRead,
+ .i2cWrite = CWM_OS_i2cWrite,
+ .uSleep = CWM_OS_uSleep,
+ .free = CWM_OS_free,
+ .malloc = CWM_OS_malloc,
+ .spiRead = NULL,
+ .spiWrite = NULL,
+ };
+ CWM_LibPreInit(&api);
+
+#else
+ OsAPI apiOS = {
+ .GetTimeNs = CWM_OS_GetTimeNs,
+ .dbgOutput = CWM_OS_dbgOutput,
+ .i2cRead = CWM_OS_i2cRead,
+ .i2cWrite = CWM_OS_i2cWrite,
+ .uSleep = CWM_OS_uSleep,
+ .free = CWM_OS_free,
+ .malloc = CWM_OS_malloc,
+ .i2cTransfer = CWM_OS_i2cTransfer,
+ .restoreData = CWM_OS_restoreData,
+ .saveData = CWM_OS_saveData,
+ .spiRead = NULL,
+ .spiWrite = NULL,
+ .securityCodeWrite = NULL,
+ .setGpio = NULL,
+ .enableGpioIRQ = NULL,
+ .disableGpioIRQ = NULL,
+ };
+ CWM_LibPreInit(&apiOS);
+#endif
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- scl.iData[1] = 2; // 0: mcu_auto_detect 2: skip_mcu_auto_detect
- CWM_SettingControl(SCL_CHIP_VENDOR_CONFIG, &scl);
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+ //set mcu_chip information, must call this before CWM_LibPostInit()
- CWM_LibPostInit(CWM_AP_SensorListen);
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
-
- //get chip information
-
- char chipInfo[64];
-
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- scl.iData[1] = 1;
- scl.iData[2] = (int)chipInfo;
- scl.iData[3] = sizeof(chipInfo);
- scl.iData[4] = 0;
- scl.iData[5] = 0;
- scl.iData[6] = 0;
- CWM_SettingControl(SCL_GET_CHIP_INFO, &scl);
- CWM_OS_dbgPrintf("have_security = %d.%d ret_buff_size = %d chipInfo = %s\n", scl.iData[5], scl.iData[6], scl.iData[4], chipInfo);
- CWM_OS_dbgPrintf("chip_settings = %d, %d, %d\n", scl.iData[9], scl.iData[10], scl.iData[11]);
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
-
- CWM_Dml_LibInit();
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
-
- #ifdef AP_ENABLE_DML_SDO_LISTEN
- // This API allows customers to develop custom features.
- // Specific settingControl commands needs to be called for this API to work.
- // No need to enable or implement this function for general usage.
- CWM_Dml_sensorDataOutput_register(CWM_AP_dmlSensorDataOutput_listen);
- #endif
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
-
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- CWM_SettingControl(SCL_DML_GET_LIB_INFO, &scl);
- CWM_OS_dbgPrintf("dml version:%d.%d.%d.%d product:%d model:%d\n", scl.iData[1], scl.iData[2], scl.iData[3], scl.iData[4], scl.iData[5], scl.iData[6]);
-
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
-
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- scl.iData[1] = 18; //00000000000000000000000000010010 高位在前
- // CWM_SettingControl(SCL_DML_DEBUG, &scl);
-
- //设置acc gyro 相关参数
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- scl.iData[7] = 5; //轴向配置
- #if 0
- scl.iData[3] = 2;
- scl.iData[4] = 2; //1 anytime 2 fifo
- scl.iData[6] = 5; //先設定5
- scl.iData[8] = 52; // for st sensor(52Hz)
- #else
- scl.iData[3] = 2;
- scl.iData[4] = 2; //1 anytime 2 fifo
- scl.iData[6] = 5; //fifocount 先設定5
- scl.iData[8] = 25; // for st sensor(52Hz)
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ scl.iData[1] = 2; // 0: mcu_auto_detect 2: skip_mcu_auto_detect
+ CWM_SettingControl(SCL_CHIP_VENDOR_CONFIG, &scl);
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+
+ CWM_LibPostInit(CWM_AP_SensorListen);
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+
+ //get chip information
+
+ char chipInfo[64];
+
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ scl.iData[1] = 1;
+ scl.iData[2] = (int)chipInfo;
+ scl.iData[3] = sizeof(chipInfo);
+ scl.iData[4] = 0;
+ scl.iData[5] = 0;
+ scl.iData[6] = 0;
+ CWM_SettingControl(SCL_GET_CHIP_INFO, &scl);
+ CWM_OS_dbgPrintf("have_security = %d.%d ret_buff_size = %d chipInfo = %s\n", scl.iData[5], scl.iData[6], scl.iData[4], chipInfo);
+ CWM_OS_dbgPrintf("chip_settings = %d, %d, %d\n", scl.iData[9], scl.iData[10], scl.iData[11]);
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+
+ CWM_Dml_LibInit();
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+
+ #ifdef AP_ENABLE_DML_SDO_LISTEN
+ // This API allows customers to develop custom features.
+ // Specific settingControl commands needs to be called for this API to work.
+ // No need to enable or implement this function for general usage.
+ CWM_Dml_sensorDataOutput_register(CWM_AP_dmlSensorDataOutput_listen);
#endif
- CWM_SettingControl(SCL_DML_DRV_AG_CONFIG, &scl);
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
-
- //设定搜寻哪种型号的传感器，以及要搜寻的属性
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- scl.iData[1] = 2;
- scl.iData[6] = 3002502;
- scl.iData[7] = (0|1|8|256|1024);
- CWM_SettingControl(SCL_DML_DRV_HW_CONFIG, &scl);
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
-
- //搜寻是否接入传感器
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- scl.iData[1] = 1;
- CWM_SettingControl(SCL_DML_DRV_INIT, &scl);
- CWM_OS_dbgPrintf("DML device=%d\n", scl.iData[2]);
-
- //获取初始化 driver清单
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- CWM_SettingControl(SCL_DML_GET_INITED_LIST, &scl);
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
-
- for (i = 0; i < scl.iData[2]; i ++) {
-
- CWM_OS_dbgPrintf("DML device[%d]: hw_id=%d hw_attr=%d\n", i, scl.iData[6 + i * 2], scl.iData[7 + i * 2]);
- }
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
- //设置抬腕功能
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- // scl.iData[1] = 5;
- // scl.iData[2] = 5;
- // scl.iData[3] = 5;
- // scl.iData[4] = 5;
- CWM_SettingControl(SCL_HAND_UPDOWN_CONFIG, &scl);
-
- //配置跑步机模式相关参数（进入跑步机模式自动生效）
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- CWM_SettingControl(SCL_PEDO_CONFIG, &scl);
-
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- CWM_SettingControl(SCL_ACTIVITY_CONFIG, &scl);
-
-
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- CWM_SettingControl(SCL_SLEEP_CONFIG, &scl);
-
-
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- scl.iData[2] = 1;
- CWM_SettingControl(SCL_SEDENTARY, &scl);
-
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- CWM_SettingControl(SCL_INACTIVITY_CONFIG, &scl);
-
-
- // memset(&scl, 0, sizeof(scl));
- // scl.iData[0] = 1;
- // scl.iData[3] = 9;
- // scl.iData[4] = 5;
- // scl.iData[7] = -1;
- // CWM_SettingControl(SCL_LOG, &scl);
- // CWM_SettingControl(SCL_LOG, &scl);
-
- //呼叫任一個CWM_Sensor_Enable 前呼叫此指令 设置手动或自动模式
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- scl.iData[1] = 1;
- // int[2] = 3，代表開啟acc和gyro感測器 1代表开启acc
- scl.iData[2] = 1;
- CWM_SettingControl(SCL_DML_DRV_ENABLE, &scl);
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
-
- memset(&scl, 0, sizeof(scl));
- scl.iData[0] = 1;
- scl.iData[3] = 3;
- scl.iData[4] = 5;
-
- CWM_Sensor_Enable(IDX_REQUEST_SENSOR);
- // //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
-
- CWM_Sensor_Enable(IDX_ALGO_ACTIVITY_OUTPUT);
- CWM_Sensor_Enable(IDX_ALGO_INACTIVITY_OUTPUT);
- CWM_Sensor_Enable(IDX_ALGO_SEDENTARY);
- CWM_Sensor_Enable(IDX_ALGO_SLEEP);
- CWM_Sensor_Enable(IDX_ACCEL);
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
- // CWM_Sensor_Enable(IDX_GYRO);
- CWM_Sensor_Enable(IDX_ALGO_NO_MOTION);
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
- // CWM_Sensor_Enable(IDX_ALGO_ANY_MOTIOIN);
- CWM_Sensor_Enable(IDX_ALGO_ABSOLUTE_STATIC);
- //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
- CWM_Sensor_Enable(IDX_ALGO_WATCH_HANDUP);
- }
- cyw_activity_mode_change(cmd);
- if(cmd == SPORT_ACTIVE_MODE_NORMAL)
- {
- cyw_inactivity_mode_change(INACTIVITY_MODE_SEDENTARY);
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ CWM_SettingControl(SCL_DML_GET_LIB_INFO, &scl);
+ CWM_OS_dbgPrintf("dml version:%d.%d.%d.%d product:%d model:%d\n", scl.iData[1], scl.iData[2], scl.iData[3], scl.iData[4], scl.iData[5], scl.iData[6]);
+
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ scl.iData[1] = 18; //00000000000000000000000000010010 高位在前
+ // CWM_SettingControl(SCL_DML_DEBUG, &scl);
+
+ //设置acc gyro 相关参数
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ scl.iData[7] = 5; //轴向配置
+#if 0
+ scl.iData[3] = 2;
+ scl.iData[4] = 2; //1 anytime 2 fifo
+ scl.iData[6] = 5; //先設定5
+ scl.iData[8] = 52; // for st sensor(52Hz)
+#else
+ scl.iData[3] = 2;
+ scl.iData[4] = 2; //1 anytime 2 fifo
+ scl.iData[6] = 5; //fifocount 先設定5
+ scl.iData[8] = 25; // for st sensor(52Hz)
+#endif
+ CWM_SettingControl(SCL_DML_DRV_AG_CONFIG, &scl);
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+
+ //设定搜寻哪种型号的传感器，以及要搜寻的属性
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ scl.iData[1] = 2;
+ scl.iData[6] = 3002502;
+ scl.iData[7] = (0|1|8|256|1024);
+ CWM_SettingControl(SCL_DML_DRV_HW_CONFIG, &scl);
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+
+ //搜寻是否接入传感器
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ scl.iData[1] = 1;
+ CWM_SettingControl(SCL_DML_DRV_INIT, &scl);
+ CWM_OS_dbgPrintf("DML device=%d\n", scl.iData[2]);
+
+ //获取初始化 driver清单
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ CWM_SettingControl(SCL_DML_GET_INITED_LIST, &scl);
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+
+ for (i = 0; i < scl.iData[2]; i ++) {
+
+ CWM_OS_dbgPrintf("DML device[%d]: hw_id=%d hw_attr=%d\n", i, scl.iData[6 + i * 2], scl.iData[7 + i * 2]);
}
+
+ //设置抬腕功能
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ // scl.iData[1] = 5;
+ // scl.iData[2] = 5;
+ // scl.iData[3] = 5;
+ // scl.iData[4] = 5;
+ CWM_SettingControl(SCL_HAND_UPDOWN_CONFIG, &scl);
+
+ //配置跑步机模式相关参数（进入跑步机模式自动生效）
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ CWM_SettingControl(SCL_PEDO_CONFIG, &scl);
+
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ CWM_SettingControl(SCL_ACTIVITY_CONFIG, &scl);
+
+
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ CWM_SettingControl(SCL_SLEEP_CONFIG, &scl);
+
+
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ scl.iData[2] = 1;
+ CWM_SettingControl(SCL_SEDENTARY, &scl);
+
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ CWM_SettingControl(SCL_INACTIVITY_CONFIG, &scl);
+
+
+ // memset(&scl, 0, sizeof(scl));
+ // scl.iData[0] = 1;
+ // scl.iData[3] = 9;
+ // scl.iData[4] = 5;
+ // scl.iData[7] = -1;
+ // CWM_SettingControl(SCL_LOG, &scl);
+ // CWM_SettingControl(SCL_LOG, &scl);
+
+ //呼叫任一個CWM_Sensor_Enable 前呼叫此指令 设置手动或自动模式
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ scl.iData[1] = 1;
+ // int[2] = 3，代表開啟acc和gyro感測器 1代表开启acc
+ scl.iData[2] = 1;
+ CWM_SettingControl(SCL_DML_DRV_ENABLE, &scl);
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+
+ memset(&scl, 0, sizeof(scl));
+ scl.iData[0] = 1;
+ scl.iData[3] = 3;
+ scl.iData[4] = 5;
+
+ CWM_Sensor_Enable(IDX_REQUEST_SENSOR);
+ // //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+
+ CWM_Sensor_Enable(IDX_ALGO_ACTIVITY_OUTPUT);
+ CWM_Sensor_Enable(IDX_ALGO_INACTIVITY_OUTPUT);
+ CWM_Sensor_Enable(IDX_ALGO_SEDENTARY);
+ CWM_Sensor_Enable(IDX_ALGO_SLEEP);
+ CWM_Sensor_Enable(IDX_ACCEL);
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+ // CWM_Sensor_Enable(IDX_GYRO);
+ CWM_Sensor_Enable(IDX_ALGO_NO_MOTION);
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+ // CWM_Sensor_Enable(IDX_ALGO_ANY_MOTIOIN);
+ CWM_Sensor_Enable(IDX_ALGO_ABSOLUTE_STATIC);
+ //CWM_OS_dbgPrintf("[DBG] %s %d\n", __func__,__LINE__);
+
+ cyw_activity_mode_change(SPORT_ACTIVE_MODE_NORMAL);
+
+ cyw_inactivity_mode_change(INACTIVITY_MODE_SEDENTARY);
+
+ send_ppg_cmd_msg(PPG_SERVICE_CMD_TYPE_DO_WEAR_MODE_TEST);
+ // cyw_activity_mode_change(cmd);
+ // if(cmd == SPORT_ACTIVE_MODE_NORMAL)
+ // {
+ // cyw_inactivity_mode_change(INACTIVITY_MODE_SEDENTARY);
+ // }
// memset(&scl, 0, sizeof(scl));
// scl.iData[0] = 1;
// scl.iData[1] = SPORT_ACTIVE_MODE_NORMAL; //ACTIVITY_MODE_NORMAL 1001
projects / mirrors / FD230.git / commitdiff