wstp_print("manu adc sample , channel = %x , voltage = %.03f , percent = %u\r\n", channel,voltage,percent);\r
return 0;\r
}\r
+\r
+#include "cat1_ctl.h"\r
static uint32_t cat1_power_on(uint8_t *para, uint32_t para_len)\r
{\r
uint32_t pwron = 0;\r
\r
if( pwron == 0)\r
{\r
- uapi_gpio_set_dir(S_AGPIO_L23, HAL_GPIO_DIRECTION_OUTPUT);\r
- uapi_gpio_set_val(S_AGPIO_L23, HAL_GPIO_LEVEL_LOW);\r
+ uapi_cat1_power_on(0);\r
wstp_print("Power OFF Cat1! L23 low \r\n");\r
}else{\r
- uapi_gpio_set_dir(S_AGPIO_L23, HAL_GPIO_DIRECTION_OUTPUT);\r
- uapi_gpio_set_val(S_AGPIO_L23, HAL_GPIO_LEVEL_HIGH);\r
+ uapi_cat1_power_on(1);\r
wstp_print("Power ON Cat1! L23 high \r\n");\r
}\r
\r
\r
if( pwron == 0)\r
{\r
- uapi_gpio_set_dir(S_AGPIO_L28, HAL_GPIO_DIRECTION_OUTPUT);\r
- uapi_gpio_set_val(S_AGPIO_L28, HAL_GPIO_LEVEL_HIGH);\r
+ uapi_cat1_reset(0);\r
wstp_print("clear reset Cat1! L28 high \r\n");\r
}else{\r
- uapi_gpio_set_dir(S_AGPIO_L28, HAL_GPIO_DIRECTION_OUTPUT);\r
- uapi_gpio_set_val(S_AGPIO_L28, HAL_GPIO_LEVEL_LOW); \r
+ uapi_cat1_reset(1);\r
wstp_print("Reset Cat1! L28 low\r\n");\r
}\r
\r
--- /dev/null
+
+
+#include "platform_core.h"
+#include "stdint.h"
+#include "pinctrl.h"
+#include "cat1_ctl.h"
+uint32_t uapi_cat1_power_on(uint32_t pwron)
+{
+
+ if( pwron == 0)
+ {
+ uapi_gpio_set_dir(S_AGPIO_L23, HAL_GPIO_DIRECTION_OUTPUT);
+ uapi_gpio_set_val(S_AGPIO_L23, HAL_GPIO_LEVEL_LOW);
+ // wstp_print("Power OFF Cat1! L23 low \r\n");
+ }else{
+ uapi_gpio_set_dir(S_AGPIO_L23, HAL_GPIO_DIRECTION_OUTPUT);
+ uapi_gpio_set_val(S_AGPIO_L23, HAL_GPIO_LEVEL_HIGH);
+ // wstp_print("Power ON Cat1! L23 high \r\n");
+ }
+
+ return 0;
+}
+uint32_t uapi_cat1_reset(uint32_t pwron)
+{
+ if( pwron == 0)
+ {
+ uapi_gpio_set_dir(S_AGPIO_L28, HAL_GPIO_DIRECTION_OUTPUT);
+ uapi_gpio_set_val(S_AGPIO_L28, HAL_GPIO_LEVEL_HIGH);
+ // wstp_print("clear reset Cat1! L28 high \r\n");
+ }else{
+ uapi_gpio_set_dir(S_AGPIO_L28, HAL_GPIO_DIRECTION_OUTPUT);
+ uapi_gpio_set_val(S_AGPIO_L28, HAL_GPIO_LEVEL_LOW);
+ // wstp_print("Reset Cat1! L28 low\r\n");
+ }
+
+ return 0;
+}
\ No newline at end of file
#endif
return nvRet;
}
+#if 0
+#define PM_SLEEP_SOFT_RESET_FORCE_WKUP_REG 0x57000014
+#define PM_SLEEP_SOFT_RESET_FORCE_WKUP_VAL 0xb66
+#define PM_MCU_SEND_IPC_WKUP_BT_REG 0x52000034
+#define PM_MCU_SEND_IPC_WKUP_BT_VAL 0x2
+#define BT_RESET_DELAY 500
+#define POWER_KEY_PARAM_LEN 0x2
+#define CALENDAR_PARAM_LEN 0x6
+#define DIAG_RES_LEN 4
+#include "non_os_reboot.h"
+#include "diag_service.h"
+diag_ser_header_t g_mcu_diag_header; // 用于保存diag回复包头内容
+bool g_app_diag_flag = false; // 用于控制执行功能后是否回复diag消息
+
+uint32_t mcu_os_sys_reset(uint8_t *para, uint32_t para_len)
+{
+ unused(para);
+ unused(para_len);
+ uint8_t res[DIAG_RES_LEN] = {0x80, 0x82, 0x00, 0x00};
+
+ send_spp_diag_msg(g_app_diag_flag, &g_mcu_diag_header, res, DIAG_RES_LEN);
+ reset_deal_with_fs();
+ // when bt at sleep, need wkup bt before soft reset
+ writew(PM_SLEEP_SOFT_RESET_FORCE_WKUP_REG, PM_SLEEP_SOFT_RESET_FORCE_WKUP_VAL);
+ writew(PM_MCU_SEND_IPC_WKUP_BT_REG, PM_MCU_SEND_IPC_WKUP_BT_VAL);
+ uapi_tcxo_delay_ms(BT_RESET_DELAY);
+ set_cpu_utils_reset_cause(REBOOT_CAUSE_APPLICATION_SYSRESETREQ);
+ hal_reboot_chip();
+ return ERRCODE_SUCC;
+}
+#include "power_display_service.h"
+uint8_t mcu_pms_is_screen_on(void)
+{
+ const power_display_svr_api_t *display_api = power_display_svr_get_api();
+ screen_state_t state = display_api->get_screen_state();
+ wstp_print("app get screen state = %u, on is %u, off is %u. \r\n", state, SCREEN_ON, SCREEN_OFF);
+ if( state == SCREEN_ON){
+ return 1;
+ }else{
+ return 0;
+ }
+}
+
+#ifdef CONFIG_LOW_POWER_TEST
+static bool g_dpu_ready_flag = false;
+#else
+static bool g_dpu_ready_flag = true;
+#endif
+#include "soc_errno.h"
+#include "pm_definition.h"
+#include "lcd_bus.h"
+uint32_t mcu_pm_lcd_off(uint8_t *para, uint32_t para_len)
+{
+ unused(para);
+ unused(para_len);
+#ifdef SUPPORT_POWER_MANAGER
+ const power_display_svr_api_t *display_api = power_display_svr_get_api();
+ return display_api->turn_off_screen();
+#endif
+ if (!lcd_get_status()) {
+ wstp_print("\r\nLCD has benn off\r\n");
+ return ERRCODE_SUCC;
+ }
+#if defined(ENABLE_UIKIT) || defined(ENABLE_LVGL)
+ NotifyScreenOff(); // Instruct the uikit to close the display operation.
+#endif
+ osDelay(100); // Wait 100ms for the uikit to complete display.
+ touch_screen_suspend(); // close touch
+ ext_errno ret = drv_vau_suspend(NULL);
+ if (ret != 0) {
+ wstp_print("drv vau suspend error ret=%x\r\n", ret);
+ return ERRCODE_FAIL;
+ }
+#ifdef SUPPORT_GPU_JPEG
+ (void)drv_jpeg_suspend(NULL);
+#endif
+#ifndef QSPI_DISPLAY
+ ret = drv_dpu_suspend(NULL);
+ if (ret != 0) {
+ wstp_print("drv dpu suspend error ret=%x\r\n", ret);
+ return ERRCODE_FAIL;
+ }
+#endif
+#ifdef SUPPORT_GPU_GMMU
+ ret = drv_gmmu_suspend(NULL);
+ if (ret != 0) {
+ wstp_print("drv gmmu suspend error ret=%x\r\n", ret);
+ return ERRCODE_FAIL;
+ }
+#endif
+ ret = uapi_lcd_deinit();
+ if (ret != 0) {
+ wstp_print("lcd deinit error ret=%x\r\n", ret);
+ return ERRCODE_FAIL;
+ }
+ pm_lcd_off_handle();
+ lcd_set_status(false);
+ g_dpu_ready_flag = false;
+ display_suspend_power_off();
+ uapi_pm_request_mode(PM_ID_VIDEO, PM_MODE_LP);
+ return ERRCODE_SUCC;
+}
+
+
+
+uint32_t mcu_pm_lcd_on(uint8_t *para, uint32_t para_len)
+{
+ unused(para);
+ unused(para_len);
+#ifdef SUPPORT_POWER_MANAGER
+ const power_display_svr_api_t *display_api = power_display_svr_get_api();
+ return display_api->turn_on_screen();
+#endif
+ uapi_pm_request_mode(PM_ID_VIDEO, PM_MODE_PERFORMACE);
+
+ if (lcd_get_status()) {
+ wstp_print("\r\nLCD has benn on\r\n");
+ return ERRCODE_SUCC;
+ }
+ pm_lcd_on_pre_handle();
+ lcd_bus_api *bus_api = lcd_get_bus_api();
+ ext_errno ret = bus_api->bus_resume();
+ if (ret != 0) {
+ wstp_print("bus resume error ret=%x\r\n", ret);
+ return ERRCODE_FAIL;
+ }
+#ifndef QSPI_DISPLAY
+ if (g_dpu_ready_flag == false) {
+ ret = drv_dpu_resume(NULL);
+ if (ret != 0) {
+ wstp_print("drv dpu resume error ret=%x\r\n", ret);
+ return ERRCODE_FAIL;
+ }
+ }
+#endif
+#ifdef SUPPORT_GPU_JPEG
+ (void)drv_jpeg_resume(NULL);
+#endif
+ ret = drv_vau_resume(NULL);
+ if (ret != 0) {
+ wstp_print("drv vau resume error ret=%x\r\n", ret);
+ return ERRCODE_FAIL;
+ }
+#ifdef SUPPORT_GPU_GMMU
+ ret = drv_gmmu_resume(NULL);
+ if (ret != 0) {
+ wstp_print("drv gmmu resume error ret=%x\r\n", ret);
+ return ERRCODE_FAIL;
+ }
+#endif
+ ret = uapi_lcd_init();
+ if (ret != 0 && ret != EXT_ERR_MIPI_ALREADY_INIT) {
+ wstp_print("LCD init error ret=%x\r\n", ret);
+ return ERRCODE_FAIL;
+ }
+#if defined(ENABLE_UIKIT) || defined(ENABLE_LVGL)
+ NotifyScreenOn(); // Instruct the uikit to start the display operation.
+#endif
+ if (g_dpu_ready_flag == false) {
+ touch_screen_resume(); // open touch
+ }
+#ifdef CONFIG_CLDO1PD_SUPPORT
+ pmu_control_cldo1_sleep_bypass(TURN_ON);
+#endif
+ lcd_set_status(true);
+ return ERRCODE_SUCC;
+}
+
+#endif
\ No newline at end of file
projects / mirrors / FD230.git / commitdiff