SSB_NAME=$APPLICATION_NAME-ssb
BUILD_NAME=_FD230
fi
+
+if [ "$1" == "xts" ]
+then
+TARGET_PACK_NAME=pack_brandy_native_js_xts
+APPLICATION_NAME=brandy-native-js-xts
+RECOVERY_NAME=$APPLICATION_NAME-r
+SSB_NAME=$APPLICATION_NAME-ssb
+BUILD_NAME=_XTS
+fi
+
if [ "$1" == "u8" ]
then
TARGET_PACK_NAME=pack_brandy_native_js_u8
#else
uapi_set4GCapability(false);
#endif
+ #ifdef SUPPORT_CAT1_SERVICE
ConfigModel::GetInstance()->SetCat1_4Gability(cat1_api_is_cat1_enabled());
+ #else
+ ConfigModel::GetInstance()->SetCat1_4Gability(false);//xts
+ #endif
if(p_NetworkAndCallView->GetVoLTEToggleButton() && p_NetworkAndCallView->GetVoLTEToggleButton()->GetState())
{
'ram_component_set': ['bgh', 'media', 'gpu', 'graphic_uikit', 'bgh_audio', 'dfx_set', 'ohos_set', 'wearable_set', 'xts_set', 'xts_test_set', 'alipay_set', 'msg_center_service'],
'dsp_version': 'max',
'packet': True,
- 'fs_image': False
+ # 'fs_image': False
},
'brandy-target1-r': {
'FD230',
'NANDFLASH_DS35X'
]
+ },
+ ##################xts#######################
+ 'brandy-native-js-xts': {
+ 'base_target_name': 'brandy-xts',
+ #自定义配置项，选择硬件及功能参数
+ 'defines': [
+ 'BOARD_FD230',
+ 'FT_SINGLE_UART',
+ 'CONFIG_EFUSE_READ_TO_RAM',
+ # 'CUSTOM_UTILS',
+ # 'CUSTOM_HID_SERVICE',
+ # 'WEARABLE_LOG_DEBUG',
+ 'SUPPORT_RC_CALIBRATION',
+ # 'PPG_HX3695',
+ 'VIB_USE_PWM',
+ 'CONFIG_PWM_SUPPORT',
+ # 'ACC_LIS2DOC',
+ # 'ENABLE_CYWEE',
+ # 'ENABLE_CUSTOM_I2C',
+ # 'SUPPORT_AT_CYWEE',
+ # 'MAG_MMC5603',
+ # 'ENABLE_VIBRATOR',
+ # 'ENABLE_SLIP',
+ 'ENCODER_SUPPORT',
+ # 'SUPPORT_SPO2_NOTIFICATION',
+ # 'SUPPORT_SPO2_NOTIFICATION_TEST',
+ # 'SUPPORT_DEVICE_PAIRING_NOTIFICATION',
+ # 'ENABLE_FONT_VECTOR_GLOBAL',
+ # 'ENABLE_SHAPING',
+ 'SUPPORT_CHARGER_PLUG_DETECTION_NOTIFICATION',
+ # 'SUPPORT_AT_CUSTOMUTILS',
+ # 'SUPPORT_BLE_SERVICE',
+ 'FD230',
+ # 'SUPPORT_AUTO_OTA_SERVER',
+ # 'CONFIG_DFX_SUPPORT_DIAG_UP_MACHINE=1',
+ #"MEM_CHECK",
+ # 'ENABLE_WEBSOCKET',
+ # 'CYWEE_SPORT',
+ # 'CYWEE_MAC_ACTIVE',
+ # 'SUPPORT_CAT1_SERVICE',
+ # 'SUPPORT_TCPIP',
+ 'SUPPORT_HID_SERVICE',
+ 'SUPPORT_BAIDU_MAP',
+ 'CFG_FLASH_SIZE=16',
+ 'SINGLE_USER_PARTITION',
+ 'TPTYPE_FT6X46',
+ 'ROTARYENCODER_HX3507',
+ 'NANDFLASH_DS35X',
+ # 'BLE_INSTRUCT',
+ # 'FACTORYTEST_SERVICE',
+ ],
+ #添加自定义应用
+ 'ram_component': [
+ # 'audio_at_service',
+ # 'media_at_service',
+ # 'bt_manager_at_service',
+ # "ppg_sensor",
+ # "ppgBleService",
+ # "mag_sensor",
+ "vibrator",
+ "vibrator_service",
+ "-:lwip",
+ # "cat1Service",
+ # "cat1Test",
+ # "audio_manager",
+ "CustomUIcomponentTool",
+ "nativeabilityfwk",
+ "custom_utils",
+ "custom_utilscpp",
+ "custom_config",
+ "rotary_encoder",
+ "nativelauncher",
+ # "ppg_service",
+ # "cywee",
+ # "batterry_service",
+ # "bleservice",
+ # "blemoder",
+ # "factorytest_service",
+ # "hid_service",
+ # "producttest",
+ ],
+ 'image_analysis': False,
+ 'fs_image_path':'fd230',
+ 'fs_image': True
+ },
+ 'brandy-native-js-xts-r': {
+ 'base_target_name': 'brandy-xts-r',
+ #自定义配置项，选择硬件及功能参数
+ 'defines': [
+ 'BOARD_FD230',
+ 'FT_SINGLE_UART',
+ 'NANDFLASH_DS35X',
+ 'TPTYPE_FT6X46',
+ 'CFG_FLASH_SIZE=16',
+ 'FD230',
+ 'SINGLE_USER_PARTITION'
+ ],
+ 'ram_component': ["at_cmd"]
+ },
+ 'brandy-native-js-xts-ssb': {
+ 'base_target_name': 'brandy-ssb',
+ #自定义配置项，选择硬件及功能参数
+ 'defines': [
+ 'BOARD_FD230',
+ 'FT_SINGLE_UART',
+ 'ENABLE_ECC',
+ 'CFG_DRIVERS_NANDFLASH',
+ 'CFG_FLASH_SIZE=16',
+ 'FD230',
+ 'NANDFLASH_DS35X'
+ ]
},
##################u8#######################
'brandy-native-js-u8':{
'pack_brandy_native_js_user': ['brandy-native-js-user-ssb', 'brandy-native-js-user-r', 'brandy-native-js-user'],
'pack_brandy_xts': ['brandy-ssb', 'brandy-xts-r', 'brandy-xts'],
+ 'pack_brandy_native_js_xts': ['brandy-native-js-xts-ssb', 'brandy-native-js-xts-r', 'brandy-native-js-xts'],
+
'brandy_all': ['brandy-ssb',
'brandy-target1', 'brandy-target3', 'brandy-target4', 'brandy-target5', 'brandy-native-js', 'brandy-native-js-user', 'brandy-xts',
'brandy-target1-r', 'brandy-target3-r', 'brandy-target4-r', 'brandy-target5-r', 'brandy-native-js-r', 'brandy-xts-r',
#ifdef FT_SINGLE_UART
void log_factory_at_callback(const void *buffer, uint16_t length, bool remaining)
{
+#ifdef XTS_SUPPORT
+ #if SYS_DEBUG_MODE_ENABLE == YES
+ log_uart_rx_callback(buffer, length, remaining);
+ #endif
+ if (zdiag_is_enable() == false) {
+ #ifdef SUPPORT_AT_CMD
+ at_cmd_msg_receive_handler((uint8_t *)buffer, length);
+ #endif
+ hal_uart_clear_pending(UART_BUS_1);
+ }
+ return;
+#endif
+
#ifndef SUPPORT_RECOVERY_DISPLAY //判定是否是在编译RECOVERY image，本参数不支持RECOVERY
#ifdef CUSTOM_UTILS
if (uapi_custom_uart_rx_enable_flag() == false)
bool is_load_languages(uint8_t id);
+#ifdef XTS_SUPPORT
+#define DEFAULT_VECTOR_FONT_FILENAME HARMONYOS_VECTOR_FONT_FILENAME
+#else
#define DEFAULT_VECTOR_FONT_FILENAME get_current_global_font_name()
+#endif
#define DEFAULT_VECTOR_FONT_FILENAME_EN HARMONYOS_VECTOR_FONT_FILENAME
#endif /* __cplusplus */
#ifndef MEMORY_MINI
+#ifdef XTS_SUPPORT
+#define YAFFSFS_N_HANDLES 110
+#else
#define YAFFSFS_N_HANDLES 100
+#endif
#define YAFFSFS_N_DSC 20
#else
#define YAFFSFS_N_HANDLES 10
#include <ctype.h>\r
#include <securec.h>\r
\r
-static const char OHOS_PRODUCT_TYPE[] = {"****"};\r
-static const char OHOS_MANUFACTURE[] = {"****"};\r
-static const char OHOS_BRAND[] = {"****"};\r
-static const char OHOS_MARKET_NAME[] = {"OpenHarmony 5.0"};\r
-static const char OHOS_PRODUCT_SERIES[] = {"****"};\r
-static const char OHOS_PRODUCT_MODEL[] = {"****"};\r
-static const char OHOS_SOFTWARE_MODEL[] = {"****"};\r
-static const char OHOS_HARDWARE_MODEL[] = {"****"};\r
+static const char OHOS_PRODUCT_TYPE[] = {"litewearable"}; \r
+static const char OHOS_MANUFACTURE[] = {"Tenxinbona"};\r
+static const char OHOS_BRAND[] = {"KUMI"};\r
+static const char OHOS_MARKET_NAME[] = {"KUMI WATCH Soar"};\r
+static const char OHOS_PRODUCT_SERIES[] = {"KUMI WATCH Soar"};\r
+static const char OHOS_PRODUCT_MODEL[] = {"Watch Soar"};\r
+static const char OHOS_SOFTWARE_MODEL[] = {"1.0.0"};\r
+static const char OHOS_HARDWARE_MODEL[] = {"FD230V10"};\r
static const char OHOS_HARDWARE_PROFILE[] = {"aout:true,display:true"};\r
static const char OHOS_BOOTLOADER_VERSION[] = {"bootloader"};\r
static const char OHOS_SECURITY_PATCH_TAG[] = {"2024/12/01"};\r
-static const char OHOS_ABI_LIST[] = {"****"};\r
+static const char OHOS_ABI_LIST[] = {"riscv-liteos"};\r
static const char OHOS_SERIAL[] = {"1234567890"}; // provided by OEM.\r
const char g_roBuildOs[] = {"OpenHarmony"};\r
const char g_roBuildVerShow[] = {"OpenHarmony 5.0.1.115"};\r
const char BUILD_TIME[] = {"BUILD_TIME"};\r
const char BUILD_ROOTHASH[] = {"BUILD_ROOTHASH"};\r
\r
-#define DATA_PATH "/user/res/"\r
+// #define DATA_PATH "/user/res/"\r
+#define DATA_PATH "/user/"\r
#define MAX_KEY_PATH 128\r
\r
static boolean IsValidChar(const char ch)\r
\r
char* HalGetSerial(void)\r
{\r
- char* value = (char*)malloc(strlen(OHOS_SERIAL) + 1);\r
- if (value == NULL) {\r
- return NULL;\r
+ static const char OHOS_SERIAL[] = "1234567890";\r
+ unsigned char sn_buf[32] = {0};\r
+ unsigned int len = 0;\r
+ unsigned int ret = zh_get_sn(sn_buf, &len);\r
+ \r
+ // 检查返回值和缓冲区是否为空\r
+ if (ret != 0 || len == 0 || sn_buf[0] == '\0') {\r
+ char* value = (char*)malloc(sizeof(OHOS_SERIAL));\r
+ if (value == NULL) {\r
+ printf("malloc failed\n");\r
+ return NULL;\r
+ }\r
+ strcpy_s(value, sizeof(OHOS_SERIAL), OHOS_SERIAL);\r
+ return value;\r
}\r
- if (strcpy_s(value, strlen(OHOS_SERIAL) + 1, OHOS_SERIAL) != 0) {\r
- free(value);\r
+ \r
+ // 正常处理非空情况\r
+ char* value = (char*)malloc(len + 1); // 使用实际长度而非strlen\r
+ if (value == NULL) {\r
+ printf("malloc failed\n");\r
return NULL;\r
}\r
+ memcpy(value, sn_buf, len); // 使用memcpy确保二进制安全\r
+ value[len] = '\0'; // 手动添加字符串结束符\r
return value;\r
}\r
-\r
char* HalGetBootloaderVersion(void)\r
{\r
char* value = (char*)malloc(strlen(OHOS_BOOTLOADER_VERSION) + 1);\r
#define VERSION_ID_LEN 256\r
#define PROPERTY_MAX_LENGTH 2048\r
#define INCREMENTAL_VERSION "version"\r
-#define BUILD_TYPE "BUILD_TYPE"\r
-#define BUILD_USER "BUILD_USER"\r
-#define BUILD_HOST "BUILD_HOST"\r
-#define BUILD_TIME "BUILD_TIME"\r
-#define BUILD_ROOTHASH "BUILD_ROOTHASH"\r
+#define BUILD_TYPE "release"\r
+#define BUILD_USER "luozheng"\r
+#define BUILD_HOST "linux"\r
+#define BUILD_TIME "20250508"//ci处本来是和真正的编译时间一致的，当下写死，因为后面提交的时候也要求必须一致。动态是我们平时release的状态，这个功能以后添加\r
+#define BUILD_ROOTHASH "default"\r
\r
#define HASH_LENGTH 32\r
#define DEV_BUF_LENGTH 3\r
#define FILE_SEEK_OFFSET_0 0
#define FILE_SEEK_OFFSET_20 20
#define FILE_SEEK_OFFSET_MINUS_20 (-20)
-#define MAX_NUM_OF_OPENED_FILES 99
+#define MAX_NUM_OF_OPENED_FILES 96
#define LENGTH_OF_READ_BUF 36
#define FILE_INDEX_31 31
#define LENGTH_OF_FILE_NAME_BUF 32
{
return &g_testSuiteManager;
}
+
+// 检查测试是否完成
+uint8_t is_xts_test_done(void)
+{
+ if (g_totalSuitesNum == g_doneSuitesNum) {
+ return 1;
+ }else{
+ return 0;
+ }
+}
\ No newline at end of file
#include "ohos_types.h"
#include "utils_config.h"
+#ifdef XTS_SUPPORT
+#define KVSTORE_PATH "kvstore"
+#else
#define KVSTORE_PATH "user/system/kvstore"
+#endif
#define MAX_KEY_PATH 256
#define MAX_GET_VALUE_LEN 0x7FFFFFFF
static pthread_mutex_t g_kvGlobalMutex = PTHREAD_MUTEX_INITIALIZER;
for l in $projectlist_wearable
do
+if [ "$projectname" == "xts" ]; then
+targetdir=code/sdk/application/wearable/fd230/$projectname/$l-$projectname
+targetdir2=code/sdk/application/wearable/fd230/$l-$projectname
+srcdir=code/sdk/application/wearable/fd230/$l
+else
targetdir=code/sdk/application/wearable/$projectname/$l-$projectname
targetdir2=code/sdk/application/wearable/$l-$projectname
srcdir=code/sdk/application/wearable/$l
+fi
# echo rm -r $targetdir
# echo mkdir -p $targetdir
# echo cp -r $srcdir/* $targetdir/
projects / mirrors / FD230.git / commitdiff