/*
*@Author:luozheng 1732036298@qq.com
*@Date:2024-12-18 10:27:52
- * @LastEditors: penglei 1624952103@qq.com
- * @LastEditTime: 2024-12-19 18:17:33
+ * @LastEditors: luozheng 1732036298@qq.com
+ * @LastEditTime: 2024-12-20 16:39:00
*@FilePath:/FD230/code/sdk/drivers/peripheral/utils/custom_save_runtime.h
*/
/**
#include <stdio.h>
#ifdef __cplusplus
#if __cplusplus
-extern "C" {
+extern "C"
+{
#endif /*__cplusplus*/
#endif /*__cplusplus*/
-typedef enum {
- //开机关机
+ typedef enum
+ {
+ // 开机关机
RUNTIME_LOG_POWER_MIN = 0x0000,
RUNTIME_LOG_POWER_ON, // 0x0001 开机
RUNTIME_LOG_POWER_OFF, // 0x0002 关机
RUNTIME_LOG_OTA, // 0x0004 ota升级
RUNTIME_LOG_FACTORY_RESET, // 0x0005 恢复出厂设置
- //蓝牙
+ // 蓝牙
RUNTIME_LOG_BLE_MIN = 0x0100,
- RUNTIME_LOG_BLE_BROADCAST_ON,
- RUNTIME_LOG_BLE_BROADCAST_OFF,
- RUNTIME_LOG_BLE_CONNECT,
- RUNTIME_LOG_BLE_DISCONNECT,
-
- RUNTIME_LOG_BLE_CONNECT_UPDATE_50, //连接参数更新 0x0105
- RUNTIME_LOG_BLE_CONNECT_UPDATE_12,
-
- RUNTIME_LOG_BLE_APP_CMD, // APP下发命令
- RUNTIME_LOG_BLE_ALIPAY_CMD,
- RUNTIME_LOG_BLE_WATCH_REPLY, //手表回复
-
- RUNTIME_LOG_BLE_APP_SYN_END, //同步结束
-
- RUNTIME_LOG_BR_CONNECT_HFP,
- RUNTIME_LOG_BR_DISCONNECT_HFP,
- RUNTIME_LOG_BR_CONNECT_A2DP,
- RUNTIME_LOG_BR_DISCONNECT_A2DP,
- RUNTIME_LOG_BR_A2DP_SNK_START_STREAM,
- RUNTIME_LOG_BR_A2DP_SNK_NOT_PLAYING,
- RUNTIME_LOG_BR_A2DP_SNK_PLAYING,
-
-
- RUNTIME_LOG_BR_CONNECT_A2DP_HEADSET,
- RUNTIME_LOG_BR_DISCONNECT_A2DP_HEADSET,
- //电话
- RUNTIME_LOG_PHONE_MIN = 0x0200,
- RUNTIME_LOG_PHONE_HFP_ACTIVE,
- RUNTIME_LOG_PHONE_HFP_HELD,
- RUNTIME_LOG_PHONE_HFP_DIALING,
- RUNTIME_LOG_PHONE_HFP_ALERTING,
- RUNTIME_LOG_PHONE_HFP_INCOMING,
- RUNTIME_LOG_PHONE_HFP_WAITING,
- RUNTIME_LOG_PHONE_HFP_FINISHED,
- RUNTIME_LOG_PHONE_HFP_TO_MOBILE_PHONE,
-
- RUNTIME_LOG_PHONE_CAT1_DIALING,
- RUNTIME_LOG_PHONE_CAT1_INCOMING,
- RUNTIME_LOG_PHONE_CAT1_WAITING,
- RUNTIME_LOG_PHONE_CAT1_ACTIVE,
- RUNTIME_LOG_PHONE_CAT1_FINISH,
- RUNTIME_LOG_PHONE_CAT1_REJECT,
- RUNTIME_LOG_PHONE_RESET, //状态复位
+ RUNTIME_LOG_BLE_BROADCAST_ON, // 0x0101 广播开启
+ RUNTIME_LOG_BLE_BROADCAST_OFF, // 0x0102 广播关闭
+ RUNTIME_LOG_BLE_CONNECT, // 0x0103 ble连接
+ RUNTIME_LOG_BLE_DISCONNECT, // 0x0104 ble断开
+
+ RUNTIME_LOG_BLE_CONNECT_UPDATE_50, // 0x0105 连接参数更新50
+ RUNTIME_LOG_BLE_CONNECT_UPDATE_12, // 0x0106 连接参数更新12
+
+ RUNTIME_LOG_BLE_APP_CMD, // 0107 APP下发命令
+ RUNTIME_LOG_BLE_ALIPAY_CMD, // 0108 支付宝命令
+ RUNTIME_LOG_BLE_WATCH_REPLY, // 0109 手表回复
+
+ RUNTIME_LOG_BLE_APP_SYN_END, // 010a 同步结束
+
+ RUNTIME_LOG_BR_CONNECT_HFP, // 010b HFP连接
+ RUNTIME_LOG_BR_DISCONNECT_HFP, // 010c HFP断开
+ RUNTIME_LOG_BR_CONNECT_A2DP, // 010d A2DP连接
+ RUNTIME_LOG_BR_DISCONNECT_A2DP, // 010e A2DP断开
+ RUNTIME_LOG_BR_A2DP_SNK_START_STREAM, // 010f A2DP流创建
+ RUNTIME_LOG_BR_A2DP_SNK_NOT_PLAYING, // 0110 A2DP流销毁
+ RUNTIME_LOG_BR_A2DP_SNK_PLAYING, // 0111 A2DP开始播放
+
+ RUNTIME_LOG_BR_CONNECT_A2DP_HEADSET, // 0112 连接耳机
+ RUNTIME_LOG_BR_DISCONNECT_A2DP_HEADSET, // 0113 断开耳机
+ // 电话
+ RUNTIME_LOG_PHONE_MIN = 0x0200,
+ RUNTIME_LOG_PHONE_HFP_ACTIVE, // 0201 HFP电话接听
+ RUNTIME_LOG_PHONE_HFP_HELD, // 0202 HFP电话挂起
+ RUNTIME_LOG_PHONE_HFP_DIALING, // 0203 HFP电话拨打
+ RUNTIME_LOG_PHONE_HFP_ALERTING, // 0204 HFP电话响铃
+ RUNTIME_LOG_PHONE_HFP_INCOMING, // 0205 HFP电话来电
+ RUNTIME_LOG_PHONE_HFP_WAITING, // 0206 HFP电话等待
+ RUNTIME_LOG_PHONE_HFP_FINISHED, // 0207 HFP电话结束
+ RUNTIME_LOG_PHONE_HFP_TO_MOBILE_PHONE, // 0208 HFP电话拨打电话
+
+ RUNTIME_LOG_PHONE_CAT1_DIALING, // 0209 cat1电话拨打
+ RUNTIME_LOG_PHONE_CAT1_INCOMING, // 020a cat1电话来电
+ RUNTIME_LOG_PHONE_CAT1_WAITING, // 020b cat1电话等待
+ RUNTIME_LOG_PHONE_CAT1_ACTIVE, // 020c cat1电话接听
+ RUNTIME_LOG_PHONE_CAT1_FINISH, // 020d cat1电话结束
+ RUNTIME_LOG_PHONE_CAT1_REJECT, // 020e cat1电话拒绝
+ RUNTIME_LOG_PHONE_RESET, // 020f 电话状态复位
// cat1
- RUNTIME_LOG_CAT1_MIN=0x0300,
- RUNTIME_LOG_CAT1_UDP_MSG_COMMING,
- RUNTIME_LOG_CAT1_UDP_MSG_NETWORKSTAT,
- RUNTIME_LOG_CAT1_UDP_MSG_TIME,
- RUNTIME_LOG_CAT1_UDP_MSG_CONNECTED,
- RUNTIME_LOG_CAT1_UDP_MSG_DISCONNECTED,
- RUNTIME_LOG_CAT1_UDP_MSG_OTA_UPDATE,
- RUNTIME_LOG_CAT1_UDP_MSG_REPLY,
- RUNTIME_LOG_CAT1_UDP_MSG_DMP_CM_ADDRESS,
- RUNTIME_LOG_CAT1_UDP_GET_CAT1VER,
- RUNTIME_LOG_CAT1_UDP_MSG_ATCMD,
- RUNTIME_LOG_CAT1_UDP_MSG_RECV_DMP,
- RUNTIME_LOG_CAT1_UDP_MSG_SMS,
-
+ RUNTIME_LOG_CAT1_MIN = 0x0300,
+ RUNTIME_LOG_CAT1_UDP_MSG_COMMING, // 0301 CAT1来电消息
+ RUNTIME_LOG_CAT1_UDP_MSG_NETWORKSTAT, // 0302 获取Cat1信号信息，VOLTE信息，信号强度，SIM卡状态
+ RUNTIME_LOG_CAT1_UDP_MSG_TIME, // 0303 获取Cat1时间
+ RUNTIME_LOG_CAT1_UDP_MSG_CONNECTED, // 0304 CAT1电话接听消息
+ RUNTIME_LOG_CAT1_UDP_MSG_DISCONNECTED, // 0305 CAT1电话挂断消息
+ RUNTIME_LOG_CAT1_UDP_MSG_OTA_UPDATE, // 0306 触发Cat1 OTA升级
+ RUNTIME_LOG_CAT1_UDP_MSG_REPLY, // 0307 UDP_MSG_REPLY
+ RUNTIME_LOG_CAT1_UDP_MSG_DMP_CM_ADDRESS, // 0308 BLE发送移动入库地址
+ RUNTIME_LOG_CAT1_UDP_GET_CAT1VER, // 0309 获取Cat1版本号
+ RUNTIME_LOG_CAT1_UDP_MSG_ATCMD, // 030a CAT1 AT指令
+ RUNTIME_LOG_CAT1_UDP_MSG_RECV_DMP, // 030b 入库配置flag
+ RUNTIME_LOG_CAT1_UDP_MSG_SMS, // 030c CAT1接收到的SMS信息给MCU，包含电话号及短信内容
/*运动*/
- RUNTIME_LOG_SPORT_MIN = 0x0400,
- //手表发起运动
- RUNTIME_LOG_DIAL_SPORT_LAUNCH,
- // App发起运动
- RUNTIME_LOG_APP_SPORT_LAUNCH,
- //开始特殊运动（跑步，走路，跑步机，漫步机）
- RUNTIME_LOG_SPORT_SPECIAL_START,
- //开始普通运动
- RUNTIME_LOG_SPORT_NORMAL_START,
- //暂停运动
- RUNTIME_LOG_SPORT_PAUSE,
- //恢复运动
- RUNTIME_LOG_SPORT_RESUME,
- //结束运动
- RUNTIME_LOG_SPORT_END,
- /*******************************/
-
- /*******************************/
- //心率
- RUNTIME_LOG_HEART_MIN = 0x0500,
- //主动测量心率
- RUNTIME_LOG_HEART_MEASURE,
- //测量心率结束
- RUNTIME_LOG_HEART_MEASURE_END,
- //被动测量心率
- RUNTIME_LOG_HEART_PASSIVE_MEASURE,
- //被动测量心率结束
- RUNTIME_LOG_OXYGEN_PASSIVE_MEASURE_END,
- //运动测量心率开始或继续
- RUNTIME_LOG_HEART_SPORT_MEASURE,
- //运动测量心率暂停或结束
- RUNTIME_LOG_OXYGEN_SPORT_MEASURE_END,
- /*******************************/
-
- //佩戴
- RUNTIME_LOG_WEAR_MIN = 0x0600,
- RUNTIME_LOG_WEAR_MIN_START = 0x0601,
+ RUNTIME_LOG_SPORT_MIN = 0x0400,
+ // 手表发起运动
+ RUNTIME_LOG_DIAL_SPORT_LAUNCH,
+ // App发起运动
+ RUNTIME_LOG_APP_SPORT_LAUNCH,
+ // 开始特殊运动（跑步，走路，跑步机，漫步机）
+ RUNTIME_LOG_SPORT_SPECIAL_START,
+ // 开始普通运动
+ RUNTIME_LOG_SPORT_NORMAL_START,
+ // 暂停运动
+ RUNTIME_LOG_SPORT_PAUSE,
+ // 恢复运动
+ RUNTIME_LOG_SPORT_RESUME,
+ // 结束运动
+ RUNTIME_LOG_SPORT_END,
+ /*******************************/
+
+ /*******************************/
+ // 心率
+ RUNTIME_LOG_HEART_MIN = 0x0500,
+ // 主动测量心率
+ RUNTIME_LOG_HEART_MEASURE,
+ // 测量心率结束
+ RUNTIME_LOG_HEART_MEASURE_END,
+ // 被动测量心率
+ RUNTIME_LOG_HEART_PASSIVE_MEASURE,
+ // 被动测量心率结束
+ RUNTIME_LOG_OXYGEN_PASSIVE_MEASURE_END,
+ // 运动测量心率开始或继续
+ RUNTIME_LOG_HEART_SPORT_MEASURE,
+ // 运动测量心率暂停或结束
+ RUNTIME_LOG_OXYGEN_SPORT_MEASURE_END,
+ /*******************************/
+
+ // 佩戴
+ RUNTIME_LOG_WEAR_MIN = 0x0600,
+ RUNTIME_LOG_WEAR_MIN_START = 0x0601,
RUNTIME_LOG_WEAR_MIN_STOP = 0x0602,
- /*******************************/
- //血氧
- RUNTIME_LOG_OXYGEN_MIN = 0x0700,
- //主动测量血氧
- RUNTIME_LOG_OXYGEN_MEASURE,
- //测量血氧结束
- RUNTIME_LOG_OXYGEN_MEASURE_END,
- /*******************************/
-
- // LCD
- RUNTIME_LOG_LCD_MIN = 0x0800,
- RUNTIME_LOG_LCD_ON, // 0x0801 屏幕亮
- RUNTIME_LOG_LCD_OFF, // 0x0802 屏幕灭
- //抬腕
- RUNTIME_LOG_RAISE_MIN = 0x0900,
- RUNTIME_LOG_RAISE_MIN_UP = 0x0901,
- RUNTIME_LOG_RAISE_MIN_DOWN = 0x0902,
-
- //充电
- RUNTIME_LOG_CHARGE_MIN = 0x0A00,
- RUNTIME_LOG_CHARGE_START, // 0x0A01 充电开始
- RUNTIME_LOG_CHARGE_STOP, // 0x0A02 充电停止
-
- //电池电量变化
- RUNTIME_LOG_BATTERY_MIN = 0x0B00,
- RUNTIME_LOG_BATTERY_MIN_UP = 0x0B01,
- RUNTIME_LOG_BATTERY_MIN_DOWN = 0x0B02,
-
- //马达
- RUNTIME_LOG_MOTOR_MIN = 0x0C00,
- RUNTIME_LOG_MOTOR_START, // 0x0C01 马达开始转动
- RUNTIME_LOG_MOTOR_STOP, // 0x0C02 马达停止转动
-
- /*******************************/
- //表盘
- RUNTIME_LOG_DIAL_MIN = 0x0D00,
- //表盘切换视频表盘(后续增加该类型，目前不好判断)
- RUNTIME_LOG_DIAL_VIDEO_START,
- //表盘切换指针表盘
- RUNTIME_LOG_DIAL_POINTER_START,
- //表盘切换序列帧表盘
- RUNTIME_LOG_DIAL_SEQUENCE_START,
- //表盘切换数码表盘
- RUNTIME_LOG_DIAL_DIGITAL_START,
- /*******************************/
-
- //音乐
- RUNTIME_LOG_MUSIC_MIN = 0x0E00,
- RUNTIME_LOG_LOCAL_MUSIC_PLAY_START, // 0x0E01 本地音乐开始播放
- RUNTIME_LOG_LOCAL_MUSIC_PLAY_PAUSE, // 0x0E02 本地音乐开始暂停
- RUNTIME_LOG_LOCAL_MUSIC_PLAY_STOP, // 0x0E03 本地音乐播放停止
-
- //铃声
- RUNTIME_LOG_RING_MIN = 0x0F00,
- RUNTIME_LOG_RING_PLAY_START_ALARM, // 0x0F01 闹钟铃声开始播放
- RUNTIME_LOG_RING_PLAY_STOP_ALARM, // 0x0F02 闹钟铃声播放停止
- RUNTIME_LOG_RING_PLAY_START_COUNTDOWN, // 0x0F03 倒计时铃声开始播放
- RUNTIME_LOG_RING_PLAY_STOP_COUNTDOWN, // 0x0F04 倒计时铃声播放停止
- RUNTIME_LOG_RING_PLAY_START_FINDWATCH, // 0x0F05 查找手表铃声开始播放
- RUNTIME_LOG_RING_PLAY_STOP_FINDWATCH, // 0x0F06 查找手表铃声播放停止
-
- //低功耗记录
+ /*******************************/
+ // 血氧
+ RUNTIME_LOG_OXYGEN_MIN = 0x0700,
+ // 主动测量血氧
+ RUNTIME_LOG_OXYGEN_MEASURE,
+ // 测量血氧结束
+ RUNTIME_LOG_OXYGEN_MEASURE_END,
+ /*******************************/
+
+ // LCD
+ RUNTIME_LOG_LCD_MIN = 0x0800,
+ RUNTIME_LOG_LCD_ON, // 0x0801 屏幕亮
+ RUNTIME_LOG_LCD_OFF, // 0x0802 屏幕灭
+ // 抬腕
+ RUNTIME_LOG_RAISE_MIN = 0x0900,
+ RUNTIME_LOG_RAISE_MIN_UP = 0x0901,
+ RUNTIME_LOG_RAISE_MIN_DOWN = 0x0902,
+
+ // 充电
+ RUNTIME_LOG_CHARGE_MIN = 0x0A00,
+ RUNTIME_LOG_CHARGE_START, // 0x0A01 充电开始
+ RUNTIME_LOG_CHARGE_STOP, // 0x0A02 充电停止
+
+ // 电池电量变化
+ RUNTIME_LOG_BATTERY_MIN = 0x0B00,
+ RUNTIME_LOG_BATTERY_MIN_UP = 0x0B01,
+ RUNTIME_LOG_BATTERY_MIN_DOWN = 0x0B02,
+
+ // 马达
+ RUNTIME_LOG_MOTOR_MIN = 0x0C00,
+ RUNTIME_LOG_MOTOR_START, // 0x0C01 马达开始转动
+ RUNTIME_LOG_MOTOR_STOP, // 0x0C02 马达停止转动
+
+ /*******************************/
+ // 表盘
+ RUNTIME_LOG_DIAL_MIN = 0x0D00,
+ // 表盘切换视频表盘(后续增加该类型，目前不好判断)
+ RUNTIME_LOG_DIAL_VIDEO_START,
+ // 表盘切换指针表盘
+ RUNTIME_LOG_DIAL_POINTER_START,
+ // 表盘切换序列帧表盘
+ RUNTIME_LOG_DIAL_SEQUENCE_START,
+ // 表盘切换数码表盘
+ RUNTIME_LOG_DIAL_DIGITAL_START,
+ /*******************************/
+
+ // 音乐
+ RUNTIME_LOG_MUSIC_MIN = 0x0E00,
+ RUNTIME_LOG_LOCAL_MUSIC_PLAY_START, // 0x0E01 本地音乐开始播放
+ RUNTIME_LOG_LOCAL_MUSIC_PLAY_PAUSE, // 0x0E02 本地音乐开始暂停
+ RUNTIME_LOG_LOCAL_MUSIC_PLAY_STOP, // 0x0E03 本地音乐播放停止
+
+ // 铃声
+ RUNTIME_LOG_RING_MIN = 0x0F00,
+ RUNTIME_LOG_RING_PLAY_START_ALARM, // 0x0F01 闹钟铃声开始播放
+ RUNTIME_LOG_RING_PLAY_STOP_ALARM, // 0x0F02 闹钟铃声播放停止
+ RUNTIME_LOG_RING_PLAY_START_COUNTDOWN, // 0x0F03 倒计时铃声开始播放
+ RUNTIME_LOG_RING_PLAY_STOP_COUNTDOWN, // 0x0F04 倒计时铃声播放停止
+ RUNTIME_LOG_RING_PLAY_START_FINDWATCH, // 0x0F05 查找手表铃声开始播放
+ RUNTIME_LOG_RING_PLAY_STOP_FINDWATCH, // 0x0F06 查找手表铃声播放停止
+
+ // 低功耗记录
RUNTIME_LOG_lOW_POWER_MIN = 0x1000,
- RUNTIME_LOG_lOW_POWER_M_SLEEP,
- RUNTIME_LOG_lOW_POWER_NO_M_SLEEP,
- RUNTIME_LOG_lOW_POWER_SYS_SLEEP,
- RUNTIME_LOG_lOW_POWER_NO_SYS_SLEEP,
- //录音
- RUNTIME_LOG_RECORD_MIN = 0x1100,
- RUNTIME_LOG_RECORD_START, // 0x1101 录音开始
- RUNTIME_LOG_RECORD_STOP, // 0x1102 录音停止
- RUNTIME_LOG_RECORD_START_AI, // 0x1103 AI录音开始
- RUNTIME_LOG_RECORD_STOP_AI, // 0x1104 AI录音停止
-
- //消息
- RUNTIME_LOG_MSG_MIN = 0x1200,
- //消息显示
- RUNTIME_LOG_MSG_SHOW,
-
-} runtime_log_cmd_Id;
-
-errcode_t uapi_save_runtime_log(uint16_t cmd);
-
-errcode_t uapi_runtime_log_service_init(void);
+ RUNTIME_LOG_lOW_POWER_M_SLEEP, // 0x1001 进入M低功耗记录
+ RUNTIME_LOG_lOW_POWER_NO_M_SLEEP, // 0x1002 退出M低功耗记录
+ RUNTIME_LOG_lOW_POWER_SYS_SLEEP, // 0x1003 进入系统低功耗记录
+ RUNTIME_LOG_lOW_POWER_NO_SYS_SLEEP, // 0x1004 退出系统低功耗记录
+ // 录音
+ RUNTIME_LOG_RECORD_MIN = 0x1100,
+ RUNTIME_LOG_RECORD_START, // 0x1101 录音开始
+ RUNTIME_LOG_RECORD_STOP, // 0x1102 录音停止
+ RUNTIME_LOG_RECORD_START_AI, // 0x1103 AI录音开始
+ RUNTIME_LOG_RECORD_STOP_AI, // 0x1104 AI录音停止
+
+ // 消息
+ RUNTIME_LOG_MSG_MIN = 0x1200,
+ // 消息显示
+ RUNTIME_LOG_MSG_SHOW,
+
+ } runtime_log_cmd_Id;
+
+ errcode_t uapi_save_runtime_log(uint16_t cmd);
+
+ errcode_t uapi_runtime_log_service_init(void);
#ifdef __cplusplus
#if __cplusplus
projects / mirrors / FD230.git / commitdiff