--- /dev/null
+# 产测成功失败按钮viewId异常问题修复
+
+## 🚨 **问题描述**
+
+产测里面的成功失败按键会变成异常的viewId，导致presenter里面的点击事件不能生效。
+
+## 🔍 **问题分析**
+
+### 1. **问题现象**
+- 成功失败按钮的viewId异常（出现乱码字符如`t\1alԟPl`）
+- 点击事件不生效
+- presenter无法处理按钮点击
+
+### 2. **问题根源**
+通过深入分析，发现了两个关键问题：
+
+#### 问题1：GetTestItemDescription函数返回nullptr
+```cpp
+std::string testModel::GetTestItemDescription(int viewId)
+{
+ if (viewId < 0 || viewId >= MAX_TEST_ITEM)
+ {
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "testModel::GetTestItemDescription: viewId out of range");
+ return nullptr; // ❌ 问题：返回nullptr
+ }
+ return test_status_list[viewId].test_result;
+}
+```
+
+#### 问题2：枚举顺序与数组初始化顺序不匹配 ⭐ **主要问题**
+**枚举定义顺序**：
+```cpp
+enum test_item_enum {
+ LCD_TEST, // 0
+ TP_TEST, // 1
+ MAGETIC_TEST, // 2
+ LUMINANCE_TEST, // 3
+ BAT_TEST, // 4
+ SPK_TEST, // 5
+ MIC_TEST, // 6
+ MOTOR_TEST, // 7
+ HR_TEST, // 8
+ GSENSOR_TEST, // 9
+ CAT1_TEST, // 10
+ KEY_TEST, // 11
+ BUTTON_TEST, // 12
+ BT_TEST, // 13
+ APPI_TEST, // 14
+ GPS_TEST, // 15
+ MAX_TEST_ITEM, // 16
+};
+```
+
+**test_status_list初始化顺序**（修复前）：
+```cpp
+test_status_t test_status_list[MAX_TEST_ITEM] = {
+ {LCD_TEST, TEST_STATUS_NONE, "LCD"}, // 索引0 ✅
+ {TP_TEST, TEST_STATUS_NONE, "Touch_Panel"}, // 索引1 ✅
+ {MAGETIC_TEST, TEST_STATUS_NONE, "Magnetic"}, // 索引2 ✅
+ {LUMINANCE_TEST, TEST_STATUS_NONE, "Luminance"}, // 索引3 ✅
+ {BAT_TEST, TEST_STATUS_NONE, "BatteryCharger"}, // 索引4 ✅
+ {SPK_TEST, TEST_STATUS_NONE, "Speaker"}, // 索引5 ✅
+ {KEY_TEST, TEST_STATUS_NONE, "Key"}, // 索引6 ❌ 应该是MIC_TEST
+ {MOTOR_TEST, TEST_STATUS_NONE, "Motor"}, // 索引7 ❌ 应该是MOTOR_TEST
+ {HR_TEST, TEST_STATUS_NONE, "Heart_Rate"}, // 索引8 ❌ 应该是HR_TEST
+ {GSENSOR_TEST, TEST_STATUS_NONE, "G_Sensor"}, // 索引9 ❌ 应该是GSENSOR_TEST
+ {CAT1_TEST, TEST_STATUS_NONE, "CAT1"}, // 索引10 ❌ 应该是CAT1_TEST
+ {BUTTON_TEST, TEST_STATUS_NONE, "Buttons"}, // 索引11 ❌ 应该是KEY_TEST
+ {BT_TEST, TEST_STATUS_NONE, "Bluetooth"}, // 索引12 ❌ 应该是BUTTON_TEST
+ {APPI_TEST, TEST_STATUS_NONE, "SE_Chip"}, // 索引13 ❌ 应该是BT_TEST
+ {GPS_TEST, TEST_STATUS_NONE, "GPS"}, // 索引14 ❌ 应该是APPI_TEST
+ // 索引15缺失：GPS_TEST
+};
+```
+
+### 3. **问题流程**
+```
+AddResultButtons(viewId)
+→ GetTestItemDescription(viewId)
+→ 返回错误的描述字符串（因为数组索引与枚举值不匹配）
+→ "TestOK" + 错误字符串
+→ 异常viewId
+→ SetViewId(异常字符串)
+→ 点击事件处理失败
+```
+
+## 🛠️ **修复方案**
+
+### 1. **修复GetTestItemDescription函数**
+将返回值从`nullptr`改为空字符串：
+```cpp
+std::string testModel::GetTestItemDescription(int viewId)
+{
+ if (viewId < 0 || viewId >= MAX_TEST_ITEM)
+ {
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "testModel::GetTestItemDescription: viewId out of range");
+ return ""; // ✅ 修复：返回空字符串
+ }
+ return test_status_list[viewId].test_result;
+}
+```
+
+### 2. **修复test_status_list的初始化顺序**
+```cpp
+test_status_t test_status_list[MAX_TEST_ITEM] = {
+ {LCD_TEST, TEST_STATUS_NONE, "LCD"},
+ {TP_TEST, TEST_STATUS_NONE, "Touch_Panel"},
+ {MAGETIC_TEST, TEST_STATUS_NONE, "Magnetic"},
+ {LUMINANCE_TEST, TEST_STATUS_NONE, "Luminance"},
+ {BAT_TEST, TEST_STATUS_NONE, "BatteryCharger"},
+ {SPK_TEST, TEST_STATUS_NONE, "Speaker"},
+ {MIC_TEST, TEST_STATUS_NONE, "Microphone"}, // ✅ 修复：索引6
+ {MOTOR_TEST, TEST_STATUS_NONE, "Motor"}, // ✅ 修复：索引7
+ {HR_TEST, TEST_STATUS_NONE, "Heart_Rate"}, // ✅ 修复：索引8
+ {GSENSOR_TEST, TEST_STATUS_NONE, "G_Sensor"}, // ✅ 修复：索引9
+ {CAT1_TEST, TEST_STATUS_NONE, "CAT1"}, // ✅ 修复：索引10
+ {KEY_TEST, TEST_STATUS_NONE, "Key"}, // ✅ 修复：索引11
+ {BUTTON_TEST, TEST_STATUS_NONE, "Buttons"}, // ✅ 修复：索引12
+ {BT_TEST, TEST_STATUS_NONE, "Bluetooth"}, // ✅ 修复：索引13
+ {APPI_TEST, TEST_STATUS_NONE, "SE_Chip"}, // ✅ 修复：索引14
+ {GPS_TEST, TEST_STATUS_NONE, "GPS"}, // ✅ 修复：索引15
+};
+```
+
+### 3. **在AddResultButtons中添加安全检查**
+```cpp
+// 获取测试项描述
+std::string viewDesc = testModel::GetInstance()->GetTestItemDescription(viewId);
+printf("目前测试项的描述是：%s\n",viewDesc.c_str());
+
+// 安全检查：确保viewDesc不为空
+if (viewDesc.empty())
+{
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "AddResultButtons: viewDesc is empty for viewId %d", viewId);
+ return false;
+}
+```
+
+## 📊 **修复后的测试项枚举对照表**
+
+| 索引 | 测试项 | 枚举值 | 描述字符串 |
+|------|--------|--------|------------|
+| 0 | LCD测试 | LCD_TEST | "LCD" |
+| 1 | 触摸测试 | TP_TEST | "Touch_Panel" |
+| 2 | 磁力计测试 | MAGETIC_TEST | "Magnetic" |
+| 3 | 亮度测试 | LUMINANCE_TEST | "Luminance" |
+| 4 | 电池充电测试 | BAT_TEST | "BatteryCharger" |
+| 5 | 扬声器测试 | SPK_TEST | "Speaker" |
+| 6 | 麦克风测试 | MIC_TEST | "Microphone" |
+| 7 | 马达测试 | MOTOR_TEST | "Motor" |
+| 8 | 心率测试 | HR_TEST | "Heart_Rate" |
+| 9 | G传感器测试 | GSENSOR_TEST | "G_Sensor" |
+| 10 | CAT1测试 | CAT1_TEST | "CAT1" |
+| 11 | 按键测试 | KEY_TEST | "Key" |
+| 12 | 按钮测试 | BUTTON_TEST | "Buttons" |
+| 13 | 蓝牙测试 | BT_TEST | "Bluetooth" |
+| 14 | SE芯片测试 | APPI_TEST | "SE_Chip" |
+| 15 | GPS测试 | GPS_TEST | "GPS" |
+
+## 🔧 **调试建议**
+
+### 1. **添加详细日志输出**
+在`AddResultButtons`中添加更多日志：
+```cpp
+printf("AddResultButtons: viewId=%d\n", viewId);
+printf("AddResultButtons: viewDesc=%s\n", viewDesc.c_str());
+printf("AddResultButtons: okIdStr=%s\n", okIdStr.c_str());
+printf("AddResultButtons: failIdStr=%s\n", failIdStr.c_str());
+```
+
+### 2. **验证枚举值范围**
+确认传入的`viewId`在0到15之间（对应MAX_TEST_ITEM-1）。
+
+### 3. **检查数组索引映射**
+确认`test_status_list[viewId]`能正确访问到对应的测试项。
+
+## ✅ **修复效果**
+
+修复后：
+- 成功失败按钮的viewId将正确设置（如"TestOKLCD"、"TestNOLCD"）
+- 点击事件能够正常生效
+- presenter能够正确处理按钮点击
+- 测试结果能够正确更新
+- 不再出现乱码字符
+
+## 🎯 **测试验证**
+
+修复完成后，请测试：
+1. 进入任意测试界面
+2. 确认成功失败按钮的viewId正确（如"TestOKLCD"、"TestNOLCD"）
+3. 点击成功或失败按钮
+4. 确认点击事件被正确处理
+5. 确认测试结果状态正确更新
+6. 确认不再出现乱码字符
test_status_enum GetResult(int viewId);
std::string GetSummaryString();
std::string GetTestItemDescription(int viewid);
+ test_status_enum GetTestStatus(int viewid); // 获取指定测试项的状态
+ std::string GetStartTime(); // 获取测试开始时间
+ std::string GetEndTime(); // 获取测试结束时间
+ void SetEndTime(); // 设置测试结束时间
+ bool IsAllTestsCompleted(); // 判断所有测试是否完成
private:
static testQRCodeView *GetInstance(void);
UIScrollView *testQRCodeInitIView(uint8_t);
+ bool testQRCodeScrollViewInit(uint8_t id);
+ std::string GenerateQRCodeContent();
void ClearAll(void);
private:
- bool testQRCodeScrollViewInit(uint8_t id);
- std::string GenerateQRCodeContent();
UIScrollView *testQRCodeScrollView{nullptr};
bool initViewStatus{false};
UILabel *Title{nullptr}; // 标题
UILabelButtonExt *button[30] = {NULL};\r
bool initViewStatus{false};\r
\r
+ // 添加成员变量来存储按钮viewId字符串，避免悬空指针问题\r
+ std::string okButtonViewId;\r
+ std::string failButtonViewId;\r
+\r
};\r
struct test_ext\r
{\r
std::string viewDesc = testModel::GetInstance()->GetTestItemDescription(LCD_TEST);
std::string okIdStr = "TestOK" + viewDesc;
std::string failIdStr = "TestNO" + viewDesc;
+
+ //打印viewDesc
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "viewDesc: %s", viewDesc.c_str());
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "okIdStr: %s", okIdStr.c_str());
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "failIdStr: %s", failIdStr.c_str());
+
oktestBtn->SetViewId(okIdStr.c_str());
failtestBtn->SetViewId(failIdStr.c_str());
+ //打印oktestBtn和failtestBtn的viewId
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "oktestBtn->GetViewId(): %s", oktestBtn->GetViewId());
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "failtestBtn->GetViewId(): %s", failtestBtn->GetViewId());
+
return true;
}
{LUMINANCE_TEST, TEST_STATUS_NONE, "Luminance"},
{BAT_TEST, TEST_STATUS_NONE, "BatteryCharger"},
{SPK_TEST, TEST_STATUS_NONE, "Speaker"},
- {KEY_TEST, TEST_STATUS_NONE, "Key"},
+ {MIC_TEST, TEST_STATUS_NONE, "Microphone"},
{MOTOR_TEST, TEST_STATUS_NONE, "Motor"},
{HR_TEST, TEST_STATUS_NONE, "Heart_Rate"},
{GSENSOR_TEST, TEST_STATUS_NONE, "G_Sensor"},
{CAT1_TEST, TEST_STATUS_NONE, "CAT1"},
+ {KEY_TEST, TEST_STATUS_NONE, "Key"},
{BUTTON_TEST, TEST_STATUS_NONE, "Buttons"},
{BT_TEST, TEST_STATUS_NONE, "Bluetooth"},
{APPI_TEST, TEST_STATUS_NONE, "SE_Chip"},
{GPS_TEST, TEST_STATUS_NONE, "GPS"},
- // { LOWPOWER_TEST, TEST_STATUS_NONE, "Deep_Sleep_Current" },
};
// 设置测试结果
if (viewId < 0 || viewId >= MAX_TEST_ITEM)
{
WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "testModel::GetTestItemDescription: viewId out of range");
- return nullptr;
+ return ""; // 返回空字符串而不是nullptr
}
return test_status_list[viewId].test_result;
}
+ // 获取指定测试项的状态
+ test_status_enum testModel::GetTestStatus(int viewId)
+ {
+ if (viewId < 0 || viewId >= MAX_TEST_ITEM)
+ {
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "testModel::GetTestStatus: viewId out of range");
+ return TEST_STATUS_NONE;
+ }
+ return test_status_list[viewId].status;
+ }
+
// 汇总测试项结果
std::string testModel::GetSummaryString()
{
return m_summary;
}
+ // 获取测试开始时间
+ std::string testModel::GetStartTime()
+ {
+ return m_start_time;
+ }
+
+ // 获取测试结束时间
+ std::string testModel::GetEndTime()
+ {
+ return m_end_time;
+ }
+
+ // 设置测试结束时间
+ void testModel::SetEndTime()
+ {
+ char current_time[9];
+ if (uapi_get_HHMMSS_Time(current_time, ':', true) == ERRCODE_SUCC)
+ {
+ m_end_time = current_time;
+ }
+ }
+
+ // 判断所有测试是否完成
+ bool testModel::IsAllTestsCompleted()
+ {
+ for (int i = 0; i < MAX_TEST_ITEM; i++)
+ {
+ if (test_status_list[i].status == TEST_STATUS_NONE)
+ {
+ return false; // 还有未测试的项
+ }
+ }
+
+ // 所有测试都完成了，设置结束时间
+ if (m_end_time.empty())
+ {
+ SetEndTime();
+ }
+
+ return true;
+ }
+
testModel *testModel::GetInstance(void)
{
static testModel instance;
// 该点击回调主要用于在系统视图界面进行跳转视图\r
bool testPresenter::OnClick(UIView &view, const ClickEvent &event)\r
{\r
+ // === VIEWID 点击追踪调试 ===\r
+ printf("=== ONCLICK VIEWID DEBUG ===\n");\r
+ printf("按钮被点击，view.GetViewId() = %s\n", view.GetViewId());\r
+ printf("view.GetViewId() 地址 = %p\n", view.GetViewId());\r
+ printf("view.GetViewId() 长度 = %zu\n", strlen(view.GetViewId()));\r
+ printf("按钮类型 = %d\n", view.GetViewType());\r
+ printf("按钮位置 = (%d, %d)\n", view.GetX(), view.GetY());\r
+ printf("按钮大小 = %dx%d\n", view.GetWidth(), view.GetHeight());\r
+ printf("=== ONCLICK VIEWID DEBUG END ===\n");\r
+ \r
testView *p_SystemView = testView::GetInstance();\r
int len=MAX_TESTVIEWID;//sizeof(Test_ViewMapper_t)/sizeof(Test_ViewMapper_t[0]);\r
//int len=5;\r
WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP,"view.GetViewId() %s ",view.GetViewId());\r
if (strncmp(view.GetViewId(), "TestOK", 6) == 0 || strncmp(view.GetViewId(), "TestNO", 6) == 0)\r
{\r
+ printf("=== 成功失败按钮处理调试 ===\n");\r
+ printf("检测到成功/失败按钮点击\n");\r
+ printf("按钮viewId = %s\n", view.GetViewId());\r
+ printf("按钮viewId地址 = %p\n", view.GetViewId());\r
+ printf("按钮viewId长度 = %zu\n", strlen(view.GetViewId()));\r
+ \r
std::string vid = view.GetViewId();\r
+ printf("转换为std::string后 = %s\n", vid.c_str());\r
+ printf("std::string长度 = %zu\n", vid.length());\r
\r
if(testModel::GetInstance()->SetResult(vid))\r
{\r
+ printf("SetResult成功\n");\r
WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP,"222");\r
return true;\r
}\r
+ printf("SetResult失败\n");\r
WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP,"111");\r
return false;\r
}\r
* @Description: 产测二维码视图实现文件
*/
#include "wearable_log.h"
-#include "custom_utils.h"
-#include "producttest/include/testPresenter.h"
#include "producttest/include/testQRCode.h"
-#include "producttest/include/testView.h"
+#include "producttest/include/testPresenter.h"
#include "producttest/include/testModel.h"
-#include "producttest/include/testabout.h"
+
+#include "ConfigModel.h"
+
+#include "custom_utils.h"
+#include "components/ui_label.h"
+#include "components/ui_label_button_ext.h"
#include "components/ui_qrcode.h"
#include "components/ui_scroll_view.h"
-#include "components/ui_label.h"
+#include "common/screen.h"
+#include "gfx_utils/color.h"
+#include "gfx_utils/graphic_log.h"
+#include "gfx_utils/style.h"
+#include "securec.h"
#include <string>
namespace OHOS
std::string testQRCodeView::GenerateQRCodeContent()
{
- std::string qrContent = "产测结果\n";
+ std::string content;
- // 添加设备信息
- qrContent += "设备: FD230\n";
- qrContent += "时间: ";
+ // 1. 产品型号（从ConfigModel获取）
+ content += "产品型号: ";
+
+ #ifdef FD230
+ content += "FD230";
+ #elif defined(BOARD_N9)
+ content += "N9";
+ #elif defined(BOARD_W9)
+ content += "W9";
+ #else
+ content += "Unknown";
+ #endif
+
+ content += "\n";
- // 获取当前时间
- char current_time[9];
- if (uapi_get_HHMMSS_Time(current_time, ':', true) == ERRCODE_SUCC)
- {
- qrContent += current_time;
+ // 2. 测试开始时间
+ content += "测试开始时间: ";
+ if (testModel::GetInstance()) {
+ content += testModel::GetInstance()->GetStartTime();
+ if (content.back() == '\n') {
+ content.pop_back(); // 移除多余的换行符
+ }
+ } else {
+ content += "获取失败";
}
- qrContent += "\n";
+ content += "\n";
- // 添加测试结果
- std::string testSummary = testModel::GetInstance()->GetSummaryString();
- if (!testSummary.empty())
- {
- qrContent += "测试结果:\n";
- qrContent += testSummary;
+ // 2.1 测试结束时间（如果有的话）
+ if (testModel::GetInstance() && !testModel::GetInstance()->GetEndTime().empty()) {
+ content += "测试结束时间: ";
+ content += testModel::GetInstance()->GetEndTime();
+ content += "\n";
+ } else if (testModel::GetInstance()) {
+ // 检查是否所有测试都完成了
+ if (testModel::GetInstance()->IsAllTestsCompleted()) {
+ content += "测试结束时间: ";
+ content += testModel::GetInstance()->GetEndTime();
+ content += "\n";
+ }
}
- else
- {
- qrContent += "暂无测试结果";
+
+ // 3. 蓝牙地址
+ content += "蓝牙地址: ";
+ uint8_t btaddr[6] = {0};
+ uint8_t btaddr_str[64] = {0};
+ uint32_t len = 6;
+ errcode_t ret = uapi_get_nv_btaddr((uint8_t *)btaddr, &len);
+ if (ret == ERRCODE_SUCC) {
+ sprintf((char *)btaddr_str, "%02X:%02X:%02X:%02X:%02X:%02X",
+ btaddr[0], btaddr[1], btaddr[2], btaddr[3], btaddr[4], btaddr[5]);
+ content += (char *)btaddr_str;
+ } else {
+ content += "获取失败";
+ }
+ content += "\n";
+
+ // 4. IMEI号
+ content += "IMEI: ";
+ if (ConfigModel::GetInstance()) {
+ content += ConfigModel::GetInstance()->Getimei();
+ } else {
+ content += "获取失败";
+ }
+ content += "\n";
+
+ // 5. 固件版本号
+ content += "固件版本: ";
+ char version_buf[128] = {0};
+ uint32_t version_len = 128;
+ if (uapi_get_buildversion((uint8_t *)version_buf, version_len) == ERRCODE_SUCC) {
+ content += version_buf;
+ } else {
+ content += "获取失败";
+ }
+ content += "\n";
+
+ // 6. Model版本（4G模块版本）
+ content += "4G模块版本: ";
+ if (ConfigModel::GetInstance()) {
+ content += ConfigModel::GetInstance()->GetmoderVer();
+ } else {
+ content += "获取失败";
+ }
+ content += "\n";
+
+ // 7. Python版本
+ content += "Python版本: ";
+ if (ConfigModel::GetInstance()) {
+ content += ConfigModel::GetInstance()->GetpyVer();
+ } else {
+ content += "获取失败";
+ }
+ content += "\n";
+
+ // 8. 测试统计信息
+ content += "\n=== 测试统计 ===\n";
+ if (testModel::GetInstance()) {
+ // 统计成功、失败、未测试的项数
+ int success_count = 0, failed_count = 0, none_count = 0;
+ for (int i = 0; i < MAX_TEST_ITEM; i++) {
+ test_status_enum status = testModel::GetInstance()->GetResult(i);
+ switch (status) {
+ case TEST_STATUS_SUCCESS:
+ success_count++;
+ break;
+ case TEST_STATUS_ERROR:
+ failed_count++;
+ break;
+ case TEST_STATUS_NONE:
+ none_count++;
+ break;
+ }
+ }
+ content += "成功: " + std::to_string(success_count) + "项\n";
+ content += "失败: " + std::to_string(failed_count) + "项\n";
+ content += "未测试: " + std::to_string(none_count) + "项\n";
+ content += "总计: " + std::to_string(MAX_TEST_ITEM) + "项\n";
+ }
+
+ // 9. 产测结果汇总
+ content += "产测结果汇总:\n";
+ if (testModel::GetInstance()) {
+ int successCount = 0;
+ int failCount = 0;
+ int notTestCount = 0;
+ std::string failedItems;
+ std::string notTestItems;
+
+ // 遍历所有测试项，统计结果
+ for (int i = 0; i < MAX_TEST_ITEM; i++) {
+ test_status_enum status = testModel::GetInstance()->GetResult(i);
+ std::string itemName = testModel::GetInstance()->GetTestItemDescription(i);
+
+ if (status == TEST_STATUS_SUCCESS) {
+ successCount++;
+ } else if (status == TEST_STATUS_ERROR) {
+ failCount++;
+ if (!failedItems.empty()) failedItems += ", ";
+ failedItems += itemName;
+ } else if (status == TEST_STATUS_NONE) {
+ notTestCount++;
+ if (!notTestItems.empty()) notTestItems += ", ";
+ notTestItems += itemName;
+ }
+ }
+
+ content += "成功项数: " + std::to_string(successCount) + "\n";
+ content += "失败项数: " + std::to_string(failCount) + "\n";
+ content += "未测试项数: " + std::to_string(notTestCount) + "\n";
+ content += "总计: " + std::to_string(MAX_TEST_ITEM) + "\n";
+
+ // 显示具体的失败项
+ if (failCount > 0) {
+ content += "失败项: " + failedItems + "\n";
+ }
+
+ // 显示具体的未测试项
+ if (notTestCount > 0) {
+ content += "未测试项: " + notTestItems + "\n";
+ }
+ } else {
+ content += "获取产测结果失败\n";
}
- return qrContent;
+ return content;
}
}
// 获取测试项描述\r
std::string viewDesc = testModel::GetInstance()->GetTestItemDescription(viewId);\r
printf("目前测试项的描述是：%s\n",viewDesc.c_str());\r
+ \r
+ // 安全检查：确保viewDesc不为空\r
+ if (viewDesc.empty())\r
+ {\r
+ WEARABLE_LOGE(WEARABLE_LOG_MODULE_APP, "AddResultButtons: viewDesc is empty for viewId %d", viewId);\r
+ return false;\r
+ }\r
\r
if (oktestBtn)\r
{\r
break;\r
}\r
\r
- // 设置按钮标识\r
- std::string okIdStr = "TestOK" + viewDesc;\r
- printf("设置成功按键的viewId %s\n", okIdStr.c_str());\r
- oktestBtn->SetViewId(okIdStr.c_str());\r
+ // 设置按钮标识 - 修复悬空指针问题\r
+ okButtonViewId = "TestOK" + viewDesc;\r
+ printf("=== VIEWID DEBUG ===\n");\r
+ printf("设置前 oktestBtn->GetViewId() = %s\n", oktestBtn->GetViewId());\r
+ printf("准备设置 viewId = %s\n", okButtonViewId.c_str());\r
+ printf("okButtonViewId 字符串地址 = %p\n", okButtonViewId.c_str());\r
+ printf("okButtonViewId 字符串长度 = %zu\n", okButtonViewId.length());\r
+ \r
+ oktestBtn->SetViewId(okButtonViewId.c_str());\r
+ \r
+ printf("设置后 oktestBtn->GetViewId() = %s\n", oktestBtn->GetViewId());\r
+ printf("设置后 oktestBtn->GetViewId() 地址 = %p\n", oktestBtn->GetViewId());\r
+ printf("=== VIEWID DEBUG END ===\n");\r
+ \r
UIView::OnClickListener *clickListener = static_cast<UIView::OnClickListener *>(testPresenter::GetInstance());\r
oktestBtn->SetOnClickListener(clickListener);\r
scrollView->Add(oktestBtn);\r
break;\r
}\r
\r
- // 设置按钮标识（修复了原代码中的错误）\r
- std::string failIdStr = "TestNO" + viewDesc;\r
- printf("设置失败按键的viewId %s\n", failIdStr.c_str());\r
- failtestBtn->SetViewId(failIdStr.c_str());\r
+ // 设置按钮标识（修复了原代码中的错误）- 修复悬空指针问题\r
+ failButtonViewId = "TestNO" + viewDesc;\r
+ printf("=== VIEWID DEBUG FAIL BUTTON ===\n");\r
+ printf("设置前 failtestBtn->GetViewId() = %s\n", failtestBtn->GetViewId());\r
+ printf("准备设置 viewId = %s\n", failButtonViewId.c_str());\r
+ printf("failButtonViewId 字符串地址 = %p\n", failButtonViewId.c_str());\r
+ printf("failButtonViewId 字符串长度 = %zu\n", failButtonViewId.length());\r
+ \r
+ failtestBtn->SetViewId(failButtonViewId.c_str());\r
+ \r
+ printf("设置后 failtestBtn->GetViewId() = %s\n", failtestBtn->GetViewId());\r
+ printf("设置后 failtestBtn->GetViewId() 地址 = %p\n", failtestBtn->GetViewId());\r
+ printf("=== VIEWID DEBUG FAIL BUTTON END ===\n");\r
+ \r
UIView::OnClickListener *clickListener = static_cast<UIView::OnClickListener *>(testPresenter::GetInstance());\r
failtestBtn->SetOnClickListener(clickListener);\r
scrollView->Add(failtestBtn);\r
projects / mirrors / FD230.git / commitdiff